return -EIO;
iobase = link->io.BasePort1;
#ifdef incomplete
- irq = link->irq.AssignedIRQ;
+ irq = link->irq;
#endif
break;
default:
struct local_info_t {
struct pcmcia_device *link;
- dev_node_t node;
int stop;
struct bus_operations *bus;
};
local->link = link;
link->priv = local;
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = NULL;
-
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
dev_dbg(&link->dev, "dio24_cs_detach\n");
- if (link->dev_node) {
- ((struct local_info_t *)link->priv)->stop = 1;
- dio24_release(link);
- }
+ ((struct local_info_t *)link->priv)->stop = 1;
+ dio24_release(link);
/* This points to the parent local_info_t struct */
if (link->priv)
}
/* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
static void dio24_config(struct pcmcia_device *link)
{
- struct local_info_t *dev = link->priv;
int ret;
win_req_t req;
goto failed;
}
- /*
- Allocate an interrupt line. Note that this does not assign a
- handler to the interrupt, unless the 'Handler' member of the
- irq structure is initialized.
- */
- if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
- goto failed;
- }
+ if (!link->irq)
+ goto failed;
/*
This actually configures the PCMCIA socket -- setting up
if (ret)
goto failed;
- /*
- At this point, the dev_node_t structure(s) need to be
- initialized and arranged in a linked list at link->dev.
- */
- sprintf(dev->node.dev_name, "ni_daq_dio24");
- dev->node.major = dev->node.minor = 0;
- link->dev_node = &dev->node;
-
/* Finally, report what we've done */
- printk(KERN_INFO "%s: index 0x%02x",
- dev->node.dev_name, link->conf.ConfigIndex);
+ dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %d", link->irq.AssignedIRQ);
+ printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);
};
MODULE_DEVICE_TABLE(pcmcia, dio24_cs_ids);
+MODULE_AUTHOR("Daniel Vecino Castel <dvecino@able.es>");
+MODULE_DESCRIPTION("Comedi driver for National Instruments "
+ "PCMCIA DAQ-Card DIO-24");
+MODULE_LICENSE("GPL");
struct pcmcia_driver dio24_cs_driver = {
.probe = dio24_cs_attach,