*/
int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
{
- uint32_t OuterLoop, InnerLoop;
- uint32_t bufsize;
- uint32_t pktStatRingSize, FBRChunkSize;
+ u32 i, j;
+ u32 bufsize;
+ u32 pktStatRingSize, FBRChunkSize;
RX_RING_t *rx_ring;
/* Setup some convenience pointers */
rx_ring->Fbr0offset);
#endif
- for (OuterLoop = 0; OuterLoop < (rx_ring->Fbr1NumEntries / FBR_CHUNKS);
- OuterLoop++) {
- uint64_t Fbr1Offset;
- uint64_t Fbr1TempPa;
- uint32_t Fbr1Align;
+ for (i = 0; i < (rx_ring->Fbr1NumEntries / FBR_CHUNKS);
+ i++) {
+ u64 Fbr1Offset;
+ u64 Fbr1TempPa;
+ u32 Fbr1Align;
/* This code allocates an area of memory big enough for N
* free buffers + (buffer_size - 1) so that the buffers can
FBRChunkSize =
(FBR_CHUNKS * rx_ring->Fbr1BufferSize) + Fbr1Align - 1;
- rx_ring->Fbr1MemVa[OuterLoop] =
+ rx_ring->Fbr1MemVa[i] =
pci_alloc_consistent(adapter->pdev, FBRChunkSize,
- &rx_ring->Fbr1MemPa[OuterLoop]);
+ &rx_ring->Fbr1MemPa[i]);
- if (!rx_ring->Fbr1MemVa[OuterLoop]) {
+ if (!rx_ring->Fbr1MemVa[i]) {
dev_err(&adapter->pdev->dev,
"Could not alloc memory\n");
return -ENOMEM;
}
/* See NOTE in "Save Physical Address" comment above */
- Fbr1TempPa = rx_ring->Fbr1MemPa[OuterLoop];
+ Fbr1TempPa = rx_ring->Fbr1MemPa[i];
et131x_align_allocated_memory(adapter,
&Fbr1TempPa,
&Fbr1Offset, (Fbr1Align - 1));
- for (InnerLoop = 0; InnerLoop < FBR_CHUNKS; InnerLoop++) {
- uint32_t index = (OuterLoop * FBR_CHUNKS) + InnerLoop;
+ for (j = 0; j < FBR_CHUNKS; j++) {
+ u32 index = (i * FBR_CHUNKS) + j;
/* Save the Virtual address of this index for quick
* access later
*/
rx_ring->Fbr[1]->Va[index] =
- (uint8_t *) rx_ring->Fbr1MemVa[OuterLoop] +
- (InnerLoop * rx_ring->Fbr1BufferSize) + Fbr1Offset;
+ (uint8_t *) rx_ring->Fbr1MemVa[i] +
+ (j * rx_ring->Fbr1BufferSize) + Fbr1Offset;
/* now store the physical address in the descriptor
* so the device can access it
*/
rx_ring->Fbr[1]->PAHigh[index] =
- (uint32_t) (Fbr1TempPa >> 32);
- rx_ring->Fbr[1]->PALow[index] = (uint32_t) Fbr1TempPa;
+ (u32) (Fbr1TempPa >> 32);
+ rx_ring->Fbr[1]->PALow[index] = (u32) Fbr1TempPa;
Fbr1TempPa += rx_ring->Fbr1BufferSize;
#ifdef USE_FBR0
/* Same for FBR0 (if in use) */
- for (OuterLoop = 0; OuterLoop < (rx_ring->Fbr0NumEntries / FBR_CHUNKS);
- OuterLoop++) {
- uint64_t Fbr0Offset;
- uint64_t Fbr0TempPa;
+ for (i = 0; i < (rx_ring->Fbr0NumEntries / FBR_CHUNKS);
+ i++) {
+ u64 Fbr0Offset;
+ u64 Fbr0TempPa;
FBRChunkSize = ((FBR_CHUNKS + 1) * rx_ring->Fbr0BufferSize) - 1;
- rx_ring->Fbr0MemVa[OuterLoop] =
+ rx_ring->Fbr0MemVa[i] =
pci_alloc_consistent(adapter->pdev, FBRChunkSize,
- &rx_ring->Fbr0MemPa[OuterLoop]);
+ &rx_ring->Fbr0MemPa[i]);
- if (!rx_ring->Fbr0MemVa[OuterLoop]) {
+ if (!rx_ring->Fbr0MemVa[i]) {
dev_err(&adapter->pdev->dev,
"Could not alloc memory\n");
return -ENOMEM;
}
/* See NOTE in "Save Physical Address" comment above */
- Fbr0TempPa = rx_ring->Fbr0MemPa[OuterLoop];
+ Fbr0TempPa = rx_ring->Fbr0MemPa[i];
et131x_align_allocated_memory(adapter,
&Fbr0TempPa,
&Fbr0Offset,
rx_ring->Fbr0BufferSize - 1);
- for (InnerLoop = 0; InnerLoop < FBR_CHUNKS; InnerLoop++) {
- uint32_t index = (OuterLoop * FBR_CHUNKS) + InnerLoop;
+ for (j = 0; j < FBR_CHUNKS; j++) {
+ u32 index = (i * FBR_CHUNKS) + j;
rx_ring->Fbr[0]->Va[index] =
- (uint8_t *) rx_ring->Fbr0MemVa[OuterLoop] +
- (InnerLoop * rx_ring->Fbr0BufferSize) + Fbr0Offset;
+ (uint8_t *) rx_ring->Fbr0MemVa[i] +
+ (j * rx_ring->Fbr0BufferSize) + Fbr0Offset;
rx_ring->Fbr[0]->PAHigh[index] =
- (uint32_t) (Fbr0TempPa >> 32);
- rx_ring->Fbr[0]->PALow[index] = (uint32_t) Fbr0TempPa;
+ (u32) (Fbr0TempPa >> 32);
+ rx_ring->Fbr[0]->PALow[index] = (u32) Fbr0TempPa;
Fbr0TempPa += rx_ring->Fbr0BufferSize;
sizeof(PKT_STAT_DESC_t) * adapter->RxRing.PsrNumEntries;
rx_ring->pPSRingVa = pci_alloc_consistent(adapter->pdev,
- pktStatRingSize + 0x0fff,
+ pktStatRingSize,
&rx_ring->pPSRingPa);
if (!rx_ring->pPSRingVa) {
"Cannot alloc memory for Packet Status Ring\n");
return -ENOMEM;
}
+ printk("PSR %lx\n", (unsigned long) rx_ring->pPSRingPa);
- /* Save physical address
- *
+ /*
* NOTE : pci_alloc_consistent(), used above to alloc DMA regions,
* ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
* are ever returned, make sure the high part is retrieved here before
* storing the adjusted address.
*/
- rx_ring->pPSRingRealPa = rx_ring->pPSRingPa;
-
- /* Align Packet Status Ring on a 4K boundary */
- et131x_align_allocated_memory(adapter,
- &rx_ring->pPSRingRealPa,
- &rx_ring->pPSRingOffset, 0x0FFF);
-
- rx_ring->pPSRingVa = (void *)((uint8_t *) rx_ring->pPSRingVa +
- rx_ring->pPSRingOffset);
/* Allocate an area of memory for writeback of status information */
rx_ring->pRxStatusVa = pci_alloc_consistent(adapter->pdev,
- sizeof(RX_STATUS_BLOCK_t) +
- 0x7, &rx_ring->pRxStatusPa);
+ sizeof(RX_STATUS_BLOCK_t),
+ &rx_ring->pRxStatusPa);
if (!rx_ring->pRxStatusVa) {
dev_err(&adapter->pdev->dev,
"Cannot alloc memory for Status Block\n");
return -ENOMEM;
}
-
- /* Save physical address */
- rx_ring->RxStatusRealPA = rx_ring->pRxStatusPa;
-
- /* Align write back on an 8 byte boundary */
- et131x_align_allocated_memory(adapter,
- &rx_ring->RxStatusRealPA,
- &rx_ring->RxStatusOffset, 0x07);
-
- rx_ring->pRxStatusVa = (void *)((uint8_t *) rx_ring->pRxStatusVa +
- rx_ring->RxStatusOffset);
rx_ring->NumRfd = NIC_DEFAULT_NUM_RFD;
+ printk("PRS %lx\n", (unsigned long)rx_ring->pRxStatusPa);
/* Recv
* pci_pool_create initializes a lookaside list. After successful
*/
void et131x_rx_dma_memory_free(struct et131x_adapter *adapter)
{
- uint32_t index;
- uint32_t bufsize;
- uint32_t pktStatRingSize;
- PMP_RFD pMpRfd;
+ u32 index;
+ u32 bufsize;
+ u32 pktStatRingSize;
+ PMP_RFD rfd;
RX_RING_t *rx_ring;
/* Setup some convenience pointers */
WARN_ON(rx_ring->nReadyRecv != rx_ring->NumRfd);
while (!list_empty(&rx_ring->RecvList)) {
- pMpRfd = (MP_RFD *) list_entry(rx_ring->RecvList.next,
+ rfd = (MP_RFD *) list_entry(rx_ring->RecvList.next,
MP_RFD, list_node);
- list_del(&pMpRfd->list_node);
- et131x_rfd_resources_free(adapter, pMpRfd);
+ list_del(&rfd->list_node);
+ et131x_rfd_resources_free(adapter, rfd);
}
while (!list_empty(&rx_ring->RecvPendingList)) {
- pMpRfd = (MP_RFD *) list_entry(rx_ring->RecvPendingList.next,
+ rfd = (MP_RFD *) list_entry(rx_ring->RecvPendingList.next,
MP_RFD, list_node);
- list_del(&pMpRfd->list_node);
- et131x_rfd_resources_free(adapter, pMpRfd);
+ list_del(&rfd->list_node);
+ et131x_rfd_resources_free(adapter, rfd);
}
/* Free Free Buffer Ring 1 */
for (index = 0; index <
(rx_ring->Fbr1NumEntries / FBR_CHUNKS); index++) {
if (rx_ring->Fbr1MemVa[index]) {
- uint32_t Fbr1Align;
+ u32 Fbr1Align;
if (rx_ring->Fbr1BufferSize > 4096)
Fbr1Align = 4096;
/* Free Packet Status Ring */
if (rx_ring->pPSRingVa) {
- rx_ring->pPSRingVa = (void *)((uint8_t *) rx_ring->pPSRingVa -
- rx_ring->pPSRingOffset);
-
pktStatRingSize =
sizeof(PKT_STAT_DESC_t) * adapter->RxRing.PsrNumEntries;
- pci_free_consistent(adapter->pdev,
- pktStatRingSize + 0x0fff,
+ pci_free_consistent(adapter->pdev, pktStatRingSize,
rx_ring->pPSRingVa, rx_ring->pPSRingPa);
rx_ring->pPSRingVa = NULL;
/* Free area of memory for the writeback of status information */
if (rx_ring->pRxStatusVa) {
- rx_ring->pRxStatusVa = (void *)((uint8_t *)
- rx_ring->pRxStatusVa - rx_ring->RxStatusOffset);
-
pci_free_consistent(adapter->pdev,
- sizeof(RX_STATUS_BLOCK_t) + 0x7,
+ sizeof(RX_STATUS_BLOCK_t),
rx_ring->pRxStatusVa, rx_ring->pRxStatusPa);
rx_ring->pRxStatusVa = NULL;
int et131x_init_recv(struct et131x_adapter *adapter)
{
int status = -ENOMEM;
- PMP_RFD pMpRfd = NULL;
- uint32_t RfdCount;
- uint32_t TotalNumRfd = 0;
+ PMP_RFD rfd = NULL;
+ u32 rfdct;
+ u32 numrfd = 0;
RX_RING_t *rx_ring = NULL;
/* Setup some convenience pointers */
rx_ring = (RX_RING_t *) &adapter->RxRing;
/* Setup each RFD */
- for (RfdCount = 0; RfdCount < rx_ring->NumRfd; RfdCount++) {
- pMpRfd = (MP_RFD *) kmem_cache_alloc(rx_ring->RecvLookaside,
+ for (rfdct = 0; rfdct < rx_ring->NumRfd; rfdct++) {
+ rfd = (MP_RFD *) kmem_cache_alloc(rx_ring->RecvLookaside,
GFP_ATOMIC | GFP_DMA);
- if (!pMpRfd) {
+ if (!rfd) {
dev_err(&adapter->pdev->dev,
"Couldn't alloc RFD out of kmem_cache\n");
status = -ENOMEM;
continue;
}
- status = et131x_rfd_resources_alloc(adapter, pMpRfd);
+ status = et131x_rfd_resources_alloc(adapter, rfd);
if (status != 0) {
dev_err(&adapter->pdev->dev,
"Couldn't alloc packet for RFD\n");
- kmem_cache_free(rx_ring->RecvLookaside, pMpRfd);
+ kmem_cache_free(rx_ring->RecvLookaside, rfd);
continue;
}
/* Add this RFD to the RecvList */
- list_add_tail(&pMpRfd->list_node, &rx_ring->RecvList);
+ list_add_tail(&rfd->list_node, &rx_ring->RecvList);
/* Increment both the available RFD's, and the total RFD's. */
rx_ring->nReadyRecv++;
- TotalNumRfd++;
+ numrfd++;
}
- if (TotalNumRfd > NIC_MIN_NUM_RFD)
+ if (numrfd > NIC_MIN_NUM_RFD)
status = 0;
- rx_ring->NumRfd = TotalNumRfd;
+ rx_ring->NumRfd = numrfd;
if (status != 0) {
- kmem_cache_free(rx_ring->RecvLookaside, pMpRfd);
+ kmem_cache_free(rx_ring->RecvLookaside, rfd);
dev_err(&adapter->pdev->dev,
"Allocation problems in et131x_init_recv\n");
}
/**
* et131x_rfd_resources_alloc
* @adapter: pointer to our private adapter structure
- * @pMpRfd: pointer to a RFD
+ * @rfd: pointer to a RFD
*
* Returns 0 on success and errno on failure (as defined in errno.h)
*/
-int et131x_rfd_resources_alloc(struct et131x_adapter *adapter, MP_RFD *pMpRfd)
+int et131x_rfd_resources_alloc(struct et131x_adapter *adapter, MP_RFD *rfd)
{
- pMpRfd->Packet = NULL;
+ rfd->Packet = NULL;
return 0;
}
/**
* et131x_rfd_resources_free - Free the packet allocated for the given RFD
* @adapter: pointer to our private adapter structure
- * @pMpRfd: pointer to a RFD
+ * @rfd: pointer to a RFD
*/
-void et131x_rfd_resources_free(struct et131x_adapter *adapter, MP_RFD *pMpRfd)
+void et131x_rfd_resources_free(struct et131x_adapter *adapter, MP_RFD *rfd)
{
- pMpRfd->Packet = NULL;
- kmem_cache_free(adapter->RxRing.RecvLookaside, pMpRfd);
+ rfd->Packet = NULL;
+ kmem_cache_free(adapter->RxRing.RecvLookaside, rfd);
}
/**
void ConfigRxDmaRegs(struct et131x_adapter *etdev)
{
struct _RXDMA_t __iomem *rx_dma = &etdev->regs->rxdma;
- struct _rx_ring_t *pRxLocal = &etdev->RxRing;
+ struct _rx_ring_t *rx_local = &etdev->RxRing;
PFBR_DESC_t fbr_entry;
- uint32_t entry;
+ u32 entry;
RXDMA_PSR_NUM_DES_t psr_num_des;
unsigned long flags;
* are ever returned, make sure the high part is retrieved here
* before storing the adjusted address.
*/
- writel((uint32_t) (pRxLocal->RxStatusRealPA >> 32),
+ writel((u32) ((u64)rx_local->pRxStatusPa >> 32),
&rx_dma->dma_wb_base_hi);
- writel((uint32_t) pRxLocal->RxStatusRealPA, &rx_dma->dma_wb_base_lo);
+ writel((u32) rx_local->pRxStatusPa, &rx_dma->dma_wb_base_lo);
- memset(pRxLocal->pRxStatusVa, 0, sizeof(RX_STATUS_BLOCK_t));
+ memset(rx_local->pRxStatusVa, 0, sizeof(RX_STATUS_BLOCK_t));
/* Set the address and parameters of the packet status ring into the
* 1310's registers
*/
- writel((uint32_t) (pRxLocal->pPSRingRealPa >> 32),
+ writel((u32) ((u64)rx_local->pPSRingPa >> 32),
&rx_dma->psr_base_hi);
- writel((uint32_t) pRxLocal->pPSRingRealPa, &rx_dma->psr_base_lo);
- writel(pRxLocal->PsrNumEntries - 1, &rx_dma->psr_num_des.value);
+ writel((u32) rx_local->pPSRingPa, &rx_dma->psr_base_lo);
+ writel(rx_local->PsrNumEntries - 1, &rx_dma->psr_num_des.value);
writel(0, &rx_dma->psr_full_offset.value);
psr_num_des.value = readl(&rx_dma->psr_num_des.value);
spin_lock_irqsave(&etdev->RcvLock, flags);
/* These local variables track the PSR in the adapter structure */
- pRxLocal->local_psr_full.bits.psr_full = 0;
- pRxLocal->local_psr_full.bits.psr_full_wrap = 0;
+ rx_local->local_psr_full.bits.psr_full = 0;
+ rx_local->local_psr_full.bits.psr_full_wrap = 0;
/* Now's the best time to initialize FBR1 contents */
- fbr_entry = (PFBR_DESC_t) pRxLocal->pFbr1RingVa;
- for (entry = 0; entry < pRxLocal->Fbr1NumEntries; entry++) {
- fbr_entry->addr_hi = pRxLocal->Fbr[1]->PAHigh[entry];
- fbr_entry->addr_lo = pRxLocal->Fbr[1]->PALow[entry];
+ fbr_entry = (PFBR_DESC_t) rx_local->pFbr1RingVa;
+ for (entry = 0; entry < rx_local->Fbr1NumEntries; entry++) {
+ fbr_entry->addr_hi = rx_local->Fbr[1]->PAHigh[entry];
+ fbr_entry->addr_lo = rx_local->Fbr[1]->PALow[entry];
fbr_entry->word2.bits.bi = entry;
fbr_entry++;
}
/* Set the address and parameters of Free buffer ring 1 (and 0 if
* required) into the 1310's registers
*/
- writel((uint32_t) (pRxLocal->Fbr1Realpa >> 32), &rx_dma->fbr1_base_hi);
- writel((uint32_t) pRxLocal->Fbr1Realpa, &rx_dma->fbr1_base_lo);
- writel(pRxLocal->Fbr1NumEntries - 1, &rx_dma->fbr1_num_des.value);
+ writel((u32) (rx_local->Fbr1Realpa >> 32), &rx_dma->fbr1_base_hi);
+ writel((u32) rx_local->Fbr1Realpa, &rx_dma->fbr1_base_lo);
+ writel(rx_local->Fbr1NumEntries - 1, &rx_dma->fbr1_num_des.value);
writel(ET_DMA10_WRAP, &rx_dma->fbr1_full_offset);
/* This variable tracks the free buffer ring 1 full position, so it
* has to match the above.
*/
- pRxLocal->local_Fbr1_full = ET_DMA10_WRAP;
- writel(((pRxLocal->Fbr1NumEntries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
+ rx_local->local_Fbr1_full = ET_DMA10_WRAP;
+ writel(((rx_local->Fbr1NumEntries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
&rx_dma->fbr1_min_des.value);
#ifdef USE_FBR0
/* Now's the best time to initialize FBR0 contents */
- fbr_entry = (PFBR_DESC_t) pRxLocal->pFbr0RingVa;
- for (entry = 0; entry < pRxLocal->Fbr0NumEntries; entry++) {
- fbr_entry->addr_hi = pRxLocal->Fbr[0]->PAHigh[entry];
- fbr_entry->addr_lo = pRxLocal->Fbr[0]->PALow[entry];
+ fbr_entry = (PFBR_DESC_t) rx_local->pFbr0RingVa;
+ for (entry = 0; entry < rx_local->Fbr0NumEntries; entry++) {
+ fbr_entry->addr_hi = rx_local->Fbr[0]->PAHigh[entry];
+ fbr_entry->addr_lo = rx_local->Fbr[0]->PALow[entry];
fbr_entry->word2.bits.bi = entry;
fbr_entry++;
}
- writel((uint32_t) (pRxLocal->Fbr0Realpa >> 32), &rx_dma->fbr0_base_hi);
- writel((uint32_t) pRxLocal->Fbr0Realpa, &rx_dma->fbr0_base_lo);
- writel(pRxLocal->Fbr0NumEntries - 1, &rx_dma->fbr0_num_des.value);
+ writel((u32) (rx_local->Fbr0Realpa >> 32), &rx_dma->fbr0_base_hi);
+ writel((u32) rx_local->Fbr0Realpa, &rx_dma->fbr0_base_lo);
+ writel(rx_local->Fbr0NumEntries - 1, &rx_dma->fbr0_num_des.value);
writel(ET_DMA10_WRAP, &rx_dma->fbr0_full_offset);
/* This variable tracks the free buffer ring 0 full position, so it
* has to match the above.
*/
- pRxLocal->local_Fbr0_full = ET_DMA10_WRAP;
- writel(((pRxLocal->Fbr0NumEntries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
+ rx_local->local_Fbr0_full = ET_DMA10_WRAP;
+ writel(((rx_local->Fbr0NumEntries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
&rx_dma->fbr0_min_des.value);
#endif
*/
void et131x_rx_dma_enable(struct et131x_adapter *etdev)
{
- if (etdev->RegistryPhyLoopbk)
- /* RxDMA is disabled for loopback operation. */
- writel(0x1, &etdev->regs->rxdma.csr.value);
- else {
/* Setup the receive dma configuration register for normal operation */
- RXDMA_CSR_t csr = { 0 };
-
- csr.bits.fbr1_enable = 1;
- if (etdev->RxRing.Fbr1BufferSize == 4096)
- csr.bits.fbr1_size = 1;
- else if (etdev->RxRing.Fbr1BufferSize == 8192)
- csr.bits.fbr1_size = 2;
- else if (etdev->RxRing.Fbr1BufferSize == 16384)
- csr.bits.fbr1_size = 3;
+ RXDMA_CSR_t csr = { 0 };
+
+ csr.bits.fbr1_enable = 1;
+ if (etdev->RxRing.Fbr1BufferSize == 4096)
+ csr.bits.fbr1_size = 1;
+ else if (etdev->RxRing.Fbr1BufferSize == 8192)
+ csr.bits.fbr1_size = 2;
+ else if (etdev->RxRing.Fbr1BufferSize == 16384)
+ csr.bits.fbr1_size = 3;
#ifdef USE_FBR0
- csr.bits.fbr0_enable = 1;
- if (etdev->RxRing.Fbr0BufferSize == 256)
- csr.bits.fbr0_size = 1;
- else if (etdev->RxRing.Fbr0BufferSize == 512)
- csr.bits.fbr0_size = 2;
- else if (etdev->RxRing.Fbr0BufferSize == 1024)
- csr.bits.fbr0_size = 3;
+ csr.bits.fbr0_enable = 1;
+ if (etdev->RxRing.Fbr0BufferSize == 256)
+ csr.bits.fbr0_size = 1;
+ else if (etdev->RxRing.Fbr0BufferSize == 512)
+ csr.bits.fbr0_size = 2;
+ else if (etdev->RxRing.Fbr0BufferSize == 1024)
+ csr.bits.fbr0_size = 3;
#endif
- writel(csr.value, &etdev->regs->rxdma.csr.value);
+ writel(csr.value, &etdev->regs->rxdma.csr.value);
+ csr.value = readl(&etdev->regs->rxdma.csr.value);
+ if (csr.bits.halt_status != 0) {
+ udelay(5);
csr.value = readl(&etdev->regs->rxdma.csr.value);
if (csr.bits.halt_status != 0) {
- udelay(5);
- csr.value = readl(&etdev->regs->rxdma.csr.value);
- if (csr.bits.halt_status != 0) {
- dev_err(&etdev->pdev->dev,
- "RX Dma failed to exit halt state. CSR 0x%08x\n",
- csr.value);
- }
+ dev_err(&etdev->pdev->dev,
+ "RX Dma failed to exit halt state. CSR 0x%08x\n",
+ csr.value);
}
}
}
* nic_rx_pkts - Checks the hardware for available packets
* @etdev: pointer to our adapter
*
- * Returns pMpRfd, a pointer to our MPRFD.
+ * Returns rfd, a pointer to our MPRFD.
*
* Checks the hardware for available packets, using completion ring
* If packets are available, it gets an RFD from the RecvList, attaches
*/
PMP_RFD nic_rx_pkts(struct et131x_adapter *etdev)
{
- struct _rx_ring_t *pRxLocal = &etdev->RxRing;
- PRX_STATUS_BLOCK_t pRxStatusBlock;
- PPKT_STAT_DESC_t pPSREntry;
- PMP_RFD pMpRfd;
- uint32_t nIndex;
- uint8_t *pBufVa;
+ struct _rx_ring_t *rx_local = &etdev->RxRing;
+ PRX_STATUS_BLOCK_t status;
+ PPKT_STAT_DESC_t psr;
+ PMP_RFD rfd;
+ u32 i;
+ uint8_t *buf;
unsigned long flags;
struct list_head *element;
- uint8_t ringIndex;
- uint16_t bufferIndex;
- uint32_t localLen;
+ uint8_t rindex;
+ uint16_t bindex;
+ u32 len;
PKT_STAT_DESC_WORD0_t Word0;
/* RX Status block is written by the DMA engine prior to every
* interrupt. It contains the next to be used entry in the Packet
* Status Ring, and also the two Free Buffer rings.
*/
- pRxStatusBlock = (PRX_STATUS_BLOCK_t) pRxLocal->pRxStatusVa;
+ status = (PRX_STATUS_BLOCK_t) rx_local->pRxStatusVa;
- if (pRxStatusBlock->Word1.bits.PSRoffset ==
- pRxLocal->local_psr_full.bits.psr_full &&
- pRxStatusBlock->Word1.bits.PSRwrap ==
- pRxLocal->local_psr_full.bits.psr_full_wrap) {
+ if (status->Word1.bits.PSRoffset ==
+ rx_local->local_psr_full.bits.psr_full &&
+ status->Word1.bits.PSRwrap ==
+ rx_local->local_psr_full.bits.psr_full_wrap) {
/* Looks like this ring is not updated yet */
return NULL;
}
/* The packet status ring indicates that data is available. */
- pPSREntry = (PPKT_STAT_DESC_t) (pRxLocal->pPSRingVa) +
- pRxLocal->local_psr_full.bits.psr_full;
+ psr = (PPKT_STAT_DESC_t) (rx_local->pPSRingVa) +
+ rx_local->local_psr_full.bits.psr_full;
/* Grab any information that is required once the PSR is
* advanced, since we can no longer rely on the memory being
* accurate
*/
- localLen = pPSREntry->word1.bits.length;
- ringIndex = (uint8_t) pPSREntry->word1.bits.ri;
- bufferIndex = (uint16_t) pPSREntry->word1.bits.bi;
- Word0 = pPSREntry->word0;
+ len = psr->word1.bits.length;
+ rindex = (uint8_t) psr->word1.bits.ri;
+ bindex = (uint16_t) psr->word1.bits.bi;
+ Word0 = psr->word0;
/* Indicate that we have used this PSR entry. */
- if (++pRxLocal->local_psr_full.bits.psr_full >
- pRxLocal->PsrNumEntries - 1) {
- pRxLocal->local_psr_full.bits.psr_full = 0;
- pRxLocal->local_psr_full.bits.psr_full_wrap ^= 1;
+ if (++rx_local->local_psr_full.bits.psr_full >
+ rx_local->PsrNumEntries - 1) {
+ rx_local->local_psr_full.bits.psr_full = 0;
+ rx_local->local_psr_full.bits.psr_full_wrap ^= 1;
}
- writel(pRxLocal->local_psr_full.value,
+ writel(rx_local->local_psr_full.value,
&etdev->regs->rxdma.psr_full_offset.value);
#ifndef USE_FBR0
- if (ringIndex != 1) {
+ if (rindex != 1) {
return NULL;
}
#endif
#ifdef USE_FBR0
- if (ringIndex > 1 ||
- (ringIndex == 0 &&
- bufferIndex > pRxLocal->Fbr0NumEntries - 1) ||
- (ringIndex == 1 &&
- bufferIndex > pRxLocal->Fbr1NumEntries - 1))
+ if (rindex > 1 ||
+ (rindex == 0 &&
+ bindex > rx_local->Fbr0NumEntries - 1) ||
+ (rindex == 1 &&
+ bindex > rx_local->Fbr1NumEntries - 1))
#else
- if (ringIndex != 1 ||
- bufferIndex > pRxLocal->Fbr1NumEntries - 1)
+ if (rindex != 1 ||
+ bindex > rx_local->Fbr1NumEntries - 1)
#endif
{
/* Illegal buffer or ring index cannot be used by S/W*/
dev_err(&etdev->pdev->dev,
"NICRxPkts PSR Entry %d indicates "
"length of %d and/or bad bi(%d)\n",
- pRxLocal->local_psr_full.bits.psr_full,
- localLen, bufferIndex);
+ rx_local->local_psr_full.bits.psr_full,
+ len, bindex);
return NULL;
}
/* Get and fill the RFD. */
spin_lock_irqsave(&etdev->RcvLock, flags);
- pMpRfd = NULL;
- element = pRxLocal->RecvList.next;
- pMpRfd = (PMP_RFD) list_entry(element, MP_RFD, list_node);
+ rfd = NULL;
+ element = rx_local->RecvList.next;
+ rfd = (PMP_RFD) list_entry(element, MP_RFD, list_node);
- if (pMpRfd == NULL) {
+ if (rfd == NULL) {
spin_unlock_irqrestore(&etdev->RcvLock, flags);
return NULL;
}
- list_del(&pMpRfd->list_node);
- pRxLocal->nReadyRecv--;
+ list_del(&rfd->list_node);
+ rx_local->nReadyRecv--;
spin_unlock_irqrestore(&etdev->RcvLock, flags);
- pMpRfd->bufferindex = bufferIndex;
- pMpRfd->ringindex = ringIndex;
+ rfd->bufferindex = bindex;
+ rfd->ringindex = rindex;
/* In V1 silicon, there is a bug which screws up filtering of
* runt packets. Therefore runt packet filtering is disabled
* in the MAC and the packets are dropped here. They are
* also counted here.
*/
- if (localLen < (NIC_MIN_PACKET_SIZE + 4)) {
+ if (len < (NIC_MIN_PACKET_SIZE + 4)) {
etdev->Stats.other_errors++;
- localLen = 0;
+ len = 0;
}
- if (localLen) {
+ if (len) {
if (etdev->ReplicaPhyLoopbk == 1) {
- pBufVa = pRxLocal->Fbr[ringIndex]->Va[bufferIndex];
+ buf = rx_local->Fbr[rindex]->Va[bindex];
- if (memcmp(&pBufVa[6], &etdev->CurrentAddress[0],
+ if (memcmp(&buf[6], &etdev->CurrentAddress[0],
ETH_ALEN) == 0) {
- if (memcmp(&pBufVa[42], "Replica packet",
+ if (memcmp(&buf[42], "Replica packet",
ETH_HLEN)) {
etdev->ReplicaPhyLoopbkPF = 1;
}
if ((etdev->PacketFilter & ET131X_PACKET_TYPE_MULTICAST)
&& !(etdev->PacketFilter & ET131X_PACKET_TYPE_PROMISCUOUS)
&& !(etdev->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST)) {
- pBufVa = pRxLocal->Fbr[ringIndex]->
- Va[bufferIndex];
+ buf = rx_local->Fbr[rindex]->
+ Va[bindex];
/* Loop through our list to see if the
* destination address of this packet
* matches one in our list.
*/
- for (nIndex = 0;
- nIndex < etdev->MCAddressCount;
- nIndex++) {
- if (pBufVa[0] ==
- etdev->MCList[nIndex][0]
- && pBufVa[1] ==
- etdev->MCList[nIndex][1]
- && pBufVa[2] ==
- etdev->MCList[nIndex][2]
- && pBufVa[3] ==
- etdev->MCList[nIndex][3]
- && pBufVa[4] ==
- etdev->MCList[nIndex][4]
- && pBufVa[5] ==
- etdev->MCList[nIndex][5]) {
+ for (i = 0;
+ i < etdev->MCAddressCount;
+ i++) {
+ if (buf[0] ==
+ etdev->MCList[i][0]
+ && buf[1] ==
+ etdev->MCList[i][1]
+ && buf[2] ==
+ etdev->MCList[i][2]
+ && buf[3] ==
+ etdev->MCList[i][3]
+ && buf[4] ==
+ etdev->MCList[i][4]
+ && buf[5] ==
+ etdev->MCList[i][5]) {
break;
}
}
* so we free our RFD when we return
* from this function.
*/
- if (nIndex == etdev->MCAddressCount)
- localLen = 0;
+ if (i == etdev->MCAddressCount)
+ len = 0;
}
- if (localLen > 0)
+ if (len > 0)
etdev->Stats.multircv++;
} else if (Word0.value & ALCATEL_BROADCAST_PKT)
etdev->Stats.brdcstrcv++;
etdev->Stats.unircv++;
}
- if (localLen > 0) {
+ if (len > 0) {
struct sk_buff *skb = NULL;
- /* pMpRfd->PacketSize = localLen - 4; */
- pMpRfd->PacketSize = localLen;
+ /* rfd->PacketSize = len - 4; */
+ rfd->PacketSize = len;
- skb = dev_alloc_skb(pMpRfd->PacketSize + 2);
+ skb = dev_alloc_skb(rfd->PacketSize + 2);
if (!skb) {
dev_err(&etdev->pdev->dev,
"Couldn't alloc an SKB for Rx\n");
return NULL;
}
- etdev->net_stats.rx_bytes += pMpRfd->PacketSize;
+ etdev->net_stats.rx_bytes += rfd->PacketSize;
- memcpy(skb_put(skb, pMpRfd->PacketSize),
- pRxLocal->Fbr[ringIndex]->Va[bufferIndex],
- pMpRfd->PacketSize);
+ memcpy(skb_put(skb, rfd->PacketSize),
+ rx_local->Fbr[rindex]->Va[bindex],
+ rfd->PacketSize);
skb->dev = etdev->netdev;
skb->protocol = eth_type_trans(skb, etdev->netdev);
netif_rx(skb);
} else {
- pMpRfd->PacketSize = 0;
+ rfd->PacketSize = 0;
}
- nic_return_rfd(etdev, pMpRfd);
- return pMpRfd;
+ nic_return_rfd(etdev, rfd);
+ return rfd;
}
/**
*/
void et131x_reset_recv(struct et131x_adapter *etdev)
{
- PMP_RFD pMpRfd;
+ PMP_RFD rfd;
struct list_head *element;
WARN_ON(list_empty(&etdev->RxRing.RecvList));
while (!list_empty(&etdev->RxRing.RecvPendingList)) {
element = etdev->RxRing.RecvPendingList.next;
- pMpRfd = (PMP_RFD) list_entry(element, MP_RFD, list_node);
+ rfd = (PMP_RFD) list_entry(element, MP_RFD, list_node);
- list_move_tail(&pMpRfd->list_node, &etdev->RxRing.RecvList);
+ list_move_tail(&rfd->list_node, &etdev->RxRing.RecvList);
}
}
*/
void et131x_handle_recv_interrupt(struct et131x_adapter *etdev)
{
- PMP_RFD pMpRfd = NULL;
- struct sk_buff *PacketArray[NUM_PACKETS_HANDLED];
- PMP_RFD RFDFreeArray[NUM_PACKETS_HANDLED];
- uint32_t PacketArrayCount = 0;
- uint32_t PacketsToHandle;
- uint32_t PacketFreeCount = 0;
- bool TempUnfinishedRec = false;
-
- PacketsToHandle = NUM_PACKETS_HANDLED;
+ PMP_RFD rfd = NULL;
+ struct sk_buff *packets[NUM_PACKETS_HANDLED];
+ PMP_RFD freed[NUM_PACKETS_HANDLED];
+ u32 count = 0;
+ u32 nfree = 0;
+ bool done = true;
/* Process up to available RFD's */
- while (PacketArrayCount < PacketsToHandle) {
+ while (count < NUM_PACKETS_HANDLED) {
if (list_empty(&etdev->RxRing.RecvList)) {
WARN_ON(etdev->RxRing.nReadyRecv != 0);
- TempUnfinishedRec = true;
+ done = false;
break;
}
- pMpRfd = nic_rx_pkts(etdev);
+ rfd = nic_rx_pkts(etdev);
- if (pMpRfd == NULL)
+ if (rfd == NULL)
break;
/* Do not receive any packets until a filter has been set.
*/
if (!etdev->PacketFilter ||
!(etdev->Flags & fMP_ADAPTER_LINK_DETECTION) ||
- pMpRfd->PacketSize == 0) {
+ rfd->PacketSize == 0) {
continue;
}
* pending list anyway.
*/
} else {
- RFDFreeArray[PacketFreeCount] = pMpRfd;
- PacketFreeCount++;
+ freed[nfree] = rfd;
+ nfree++;
dev_warn(&etdev->pdev->dev,
"RFD's are running out\n");
}
- PacketArray[PacketArrayCount] = pMpRfd->Packet;
- PacketArrayCount++;
+ packets[count] = rfd->Packet;
+ count++;
}
- if ((PacketArrayCount == NUM_PACKETS_HANDLED) || TempUnfinishedRec) {
+ if (count == NUM_PACKETS_HANDLED || !done) {
etdev->RxRing.UnfinishedReceives = true;
writel(PARM_TX_TIME_INT_DEF * NANO_IN_A_MICRO,
&etdev->regs->global.watchdog_timer);
- } else {
+ } else
/* Watchdog timer will disable itself if appropriate. */
etdev->RxRing.UnfinishedReceives = false;
- }
}
static inline u32 bump_fbr(u32 *fbr, u32 limit)
/**
* NICReturnRFD - Recycle a RFD and put it back onto the receive list
* @etdev: pointer to our adapter
- * @pMpRfd: pointer to the RFD
+ * @rfd: pointer to the RFD
*/
-void nic_return_rfd(struct et131x_adapter *etdev, PMP_RFD pMpRfd)
+void nic_return_rfd(struct et131x_adapter *etdev, PMP_RFD rfd)
{
struct _rx_ring_t *rx_local = &etdev->RxRing;
struct _RXDMA_t __iomem *rx_dma = &etdev->regs->rxdma;
- uint16_t bi = pMpRfd->bufferindex;
- uint8_t ri = pMpRfd->ringindex;
+ uint16_t bi = rfd->bufferindex;
+ uint8_t ri = rfd->ringindex;
unsigned long flags;
/* We don't use any of the OOB data besides status. Otherwise, we
spin_lock_irqsave(&etdev->FbrLock, flags);
if (ri == 1) {
- PFBR_DESC_t pNextDesc =
+ PFBR_DESC_t next =
(PFBR_DESC_t) (rx_local->pFbr1RingVa) +
INDEX10(rx_local->local_Fbr1_full);
* the PA / Buffer Index for the returned buffer into
* the oldest (next to be freed)FBR entry
*/
- pNextDesc->addr_hi = rx_local->Fbr[1]->PAHigh[bi];
- pNextDesc->addr_lo = rx_local->Fbr[1]->PALow[bi];
- pNextDesc->word2.value = bi;
+ next->addr_hi = rx_local->Fbr[1]->PAHigh[bi];
+ next->addr_lo = rx_local->Fbr[1]->PALow[bi];
+ next->word2.value = bi;
writel(bump_fbr(&rx_local->local_Fbr1_full,
rx_local->Fbr1NumEntries - 1),
}
#ifdef USE_FBR0
else {
- PFBR_DESC_t pNextDesc =
+ PFBR_DESC_t next =
(PFBR_DESC_t) rx_local->pFbr0RingVa +
INDEX10(rx_local->local_Fbr0_full);
* the PA / Buffer Index for the returned buffer into
* the oldest (next to be freed) FBR entry
*/
- pNextDesc->addr_hi = rx_local->Fbr[0]->PAHigh[bi];
- pNextDesc->addr_lo = rx_local->Fbr[0]->PALow[bi];
- pNextDesc->word2.value = bi;
+ next->addr_hi = rx_local->Fbr[0]->PAHigh[bi];
+ next->addr_lo = rx_local->Fbr[0]->PALow[bi];
+ next->word2.value = bi;
writel(bump_fbr(&rx_local->local_Fbr0_full,
rx_local->Fbr0NumEntries - 1),
* our list
*/
spin_lock_irqsave(&etdev->RcvLock, flags);
- list_add_tail(&pMpRfd->list_node, &rx_local->RecvList);
+ list_add_tail(&rfd->list_node, &rx_local->RecvList);
rx_local->nReadyRecv++;
spin_unlock_irqrestore(&etdev->RcvLock, flags);