#define QT2_GET_SET_UART 0xc1
#define QT2_HW_FLOW_CONTROL_MASK 0xc5
#define QT2_SW_FLOW_CONTROL_MASK 0xc6
-#define QT2_SW_FLOW_CONTROL_DISABLE 0xc7
-/*#define QT_BREAK_CONTROL 0xc8
-#define QT_STOP_RECEIVE 0xe0*/
-#define QT2_FLUSH_DEVICE 0xc4
-#define QT_GET_SET_QMCR 0xe1
+#define QT2_SW_FLOW_CONTROL_DISABLE 0xc7
+#define QT2_BREAK_CONTROL 0xc8
+#define QT2_STOP_RECEIVE 0xe0
+#define QT2_FLUSH_DEVICE 0xc4
+#define QT2_GET_SET_QMCR 0xe1
/* sorts of flush we can do on */
#define QT2_FLUSH_RX 0x00
.no_dynamic_id = 1,
};
-/** structure in which to keep all the messy stuff that this driver needs
- * alongside the usb_serial_port structure
- * @param read_urb_busy Flag indicating that port->read_urb is in use
- * @param close_pending flag indicating that this port is in the process of
+/**
+ * quatech2_port: Structure in which to keep all the messy stuff that this
+ * driver needs alongside the usb_serial_port structure
+ * @read_urb_busy: Flag indicating that port->read_urb is in use
+ * @close_pending: flag indicating that this port is in the process of
* being closed (and so no new reads / writes should be started).
- * @param shadowLSR Last received state of the line status register, holds the
+ * @shadowLSR: Last received state of the line status register, holds the
* value of the line status flags from the port
- * @param shadowMSR Last received state of the modem status register, holds
+ * @shadowMSR: Last received state of the modem status register, holds
* the value of the modem status received from the port
- * @param rcv_flush Flag indicating that a receive flush has occured on
+ * @rcv_flush: Flag indicating that a receive flush has occured on
* the hardware.
- * @param xmit_flush Flag indicating that a transmit flush has been processed by
+ * @xmit_flush: Flag indicating that a transmit flush has been processed by
* the hardware.
- * @param fifo_empty_flag
- * - Starts off true when port opened
- * - set false when a write is submitted to the driver
- * - as far as I can see not true again until device is re-opened.
- * - read in a number of places.
- * @param tx_fifo_room
- * - set to FIFO_DEPTH when port opened
- * - decremented by tc_pending_bytes when a new write is submitted.
- * - set to FIFO_DEPTH when "xmit_empty" is received from the device,
- * regardless of how many bytes were reported to have been sent (?)
- *
- * @param tx_pending_bytes Number of bytes waiting to be sent. This total
+ * @tx_pending_bytes: Number of bytes waiting to be sent. This total
* includes the size (excluding header) of URBs that have been submitted but
* have not yet been sent to to the device, and bytes that have been sent out
* of the port but not yet reported sent by the "xmit_empty" messages (which
* each time a write urb is dispatched.
* - is decremented each time a "transmit empty" message is received
* by the driver in the data stream.
+ * @sem: Semaphore to lock access to this structure when we need to ensure that
+ * races don't occur to access bits of it.
+ * @open_count: The number of uses of the port currently having
+ * it open, i.e. the reference count.
*/
struct quatech2_port {
int magic;
bool close_pending;
__u8 shadowLSR;
__u8 shadowMSR;
- /*int xmit_fifo_room_bytes;*/
bool rcv_flush;
bool xmit_flush;
-/* bool fifo_empty_flag;
- int tx_fifo_room;*/
int tx_pending_bytes;
+ struct semaphore sem;
+ int open_count;
char active; /* someone has this device open */
unsigned char *xfer_to_tty_buffer;
wait_queue_head_t wait;
- int open_count; /* number of times this port has been opened */
- struct semaphore sem; /* locks this structure */
+
__u8 shadowLCR; /* last LCR value received */
__u8 shadowMCR; /* last MCR value received */
char RxHolding;
static int qt2_boxsetsw_flowctl(struct usb_serial *serial, __u16 UartNumber,
unsigned char stop_char, unsigned char start_char);
static int qt2_boxunsetsw_flowctl(struct usb_serial *serial, __u16 UartNumber);
+static int qt2_boxstoprx(struct usb_serial *serial, unsigned short uart_number,
+ unsigned short stop);
/* implementation functions, roughly in order of use, are here */
static int qt2_calc_num_ports(struct usb_serial *serial)
__func__, i);
return -ENOMEM;
}
+ /* initialise stuff in the structure */
+ qt2_port->open_count = 0; /* port is not open */
spin_lock_init(&qt2_port->lock);
qt2_set_port_private(port, qt2_port);
}
port->bulk_out_size,
qt2_write_bulk_callback,
port);
- /*port_extra->fifo_empty_flag = true;
- port_extra->tx_fifo_room = FIFO_DEPTH;*/
port_extra->tx_pending_bytes = 0;
if (dev_extra->open_ports == 0) {
/* initialize our wait queues */
init_waitqueue_head(&port_extra->wait);
+ /* increment the count of openings of this port by one */
+ port_extra->open_count++;
/* remember to store dev_extra, port_extra and port0_extra back again at
* end !*/
port->bulk_out_buffer = NULL;
port->bulk_out_size = 0;
+ /* decrement the count of openings of this port by one */
+ port_extra->open_count--;
+ /* one less overall open as well */
dev_extra->open_ports--;
dbg("%s(): Exit, dev_extra->open_ports = %d", __func__,
dev_extra->open_ports);
/* Round to nearest divisor */
if (((remainder * 2) >= baud) && (baud != 110))
divisor++;
- dbg("%s(): setting divisor = %d, QT2_MAX_BAUD_RATE = %d , LCR = 0x%x",
+ dbg("%s(): setting divisor = %d, QT2_MAX_BAUD_RATE = %d , LCR = %#.2x",
__func__, divisor, QT2_MAX_BAUD_RATE, LCR_change_to);
status = qt2_boxsetuart(serial, UartNumber, (unsigned short) divisor,
return 0;
}
+/** qt2_break - Turn BREAK on and off on the UARTs
+ */
+static void qt2_break(struct tty_struct *tty, int break_state)
+{
+ struct usb_serial_port *port = tty->driver_data; /* parent port */
+ struct usb_serial *serial = port->serial; /* parent device */
+ struct quatech2_port *port_extra; /* extra data for this port */
+ __u16 break_value;
+ unsigned int result;
+
+ port_extra = qt2_get_port_private(port);
+ if (!serial) {
+ dbg("%s(): port %d: no serial object", __func__, port->number);
+ return;
+ }
+
+ if (break_state == -1)
+ break_value = 1;
+ else
+ break_value = 0;
+ dbg("%s(): port %d, break_value %d", __func__, port->number,
+ break_value);
+
+ down(&port_extra->sem);
+ if (!port_extra->open_count) {
+ dbg("%s(): port not open", __func__);
+ goto exit;
+ }
+
+ result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ QT2_BREAK_CONTROL, 0x40, break_value,
+ port->number, NULL, 0, 300);
+exit:
+ up(&port_extra->sem);
+ dbg("%s(): exit port %d", __func__, port->number);
+
+}
+/**
+ * qt2_throttle: - stop reading new data from the port
+ */
+static void qt2_throttle(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct usb_serial *serial = port->serial;
+ struct quatech2_port *port_extra; /* extra data for this port */
+ dbg("%s(): port %d", __func__, port->number);
+
+ port_extra = qt2_get_port_private(port);
+ if (!serial) {
+ dbg("%s(): enter port %d no serial object", __func__,
+ port->number);
+ return;
+ }
+
+ down(&port_extra->sem); /* lock structure */
+ if (!port_extra->open_count) {
+ dbg("%s(): port not open", __func__);
+ goto exit;
+ }
+ /* Send command to box to stop receiving stuff. This will stop this
+ * particular UART from filling the endpoint - in the multiport case the
+ * FPGA UART will handle any flow control implmented, but for the single
+ * port it's handed differently and we just quit submitting urbs
+ */
+ if (serial->dev->descriptor.idProduct != QUATECH_SSU2_100)
+ qt2_boxstoprx(serial, port->number, 1);
+
+ port->throttled = 1;
+exit:
+ up(&port_extra->sem);
+ dbg("%s(): port %d: setting port->throttled", __func__, port->number);
+ return;
+}
+
+/**
+ * qt2_unthrottle: - start receiving data through the port again after being
+ * throttled
+ */
+static void qt2_unthrottle(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct usb_serial *serial = port->serial;
+ struct quatech2_port *port_extra; /* extra data for this port */
+ struct usb_serial_port *port0; /* first port structure on device */
+ struct quatech2_dev *dev_extra; /* extra data for the device */
+
+ if (!serial) {
+ dbg("%s() enter port %d no serial object!", __func__,
+ port->number);
+ return;
+ }
+ dbg("%s(): enter port %d", __func__, port->number);
+ dev_extra = qt2_get_dev_private(serial);
+ port_extra = qt2_get_port_private(port);
+ port0 = serial->port[0]; /* get the first port's device structure */
+
+ down(&port_extra->sem);
+ if (!port_extra->open_count) {
+ dbg("%s(): port %d not open", __func__, port->number);
+ goto exit;
+ }
+
+ if (port->throttled != 0) {
+ dbg("%s(): port %d: unsetting port->throttled", __func__,
+ port->number);
+ port->throttled = 0;
+ /* Send command to box to start receiving stuff */
+ if (serial->dev->descriptor.idProduct != QUATECH_SSU2_100) {
+ qt2_boxstoprx(serial, port->number, 0);
+ } else if (dev_extra->ReadBulkStopped == true) {
+ usb_fill_bulk_urb(port0->read_urb, serial->dev,
+ usb_rcvbulkpipe(serial->dev,
+ port0->bulk_in_endpointAddress),
+ port0->bulk_in_buffer,
+ port0->bulk_in_size,
+ qt2_read_bulk_callback,
+ serial);
+ }
+ }
+exit:
+ up(&port_extra->sem);
+ dbg("%s(): exit port %d", __func__, port->number);
+ return;
+}
+
/* internal, private helper functions for the driver */
/* Power up the FPGA in the box to get it working */
}
/*
- * qt2_boxsetQMCR Issue a QT_GET_SET_QMCR vendor-spcific request on the
+ * qt2_boxsetQMCR Issue a QT2_GET_SET_QMCR vendor-spcific request on the
* default control pipe. If successful return the number of bytes written,
* otherwise return a negative error number of the problem.
*/
Uart_Number, PortSettings);
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- QT_GET_SET_QMCR, 0x40, PortSettings,
+ QT2_GET_SET_QMCR, 0x40, PortSettings,
(__u16)Uart_Number, NULL, 0, 5000);
return result;
}
/* active is a usb_serial_port. It has a member port which is a
* tty_port. From this we get a tty_struct pointer which is what we
- * actually wanted, and keep it on tty_st */
+ * actually wanted, and keep it on tty_st */
tty_st = tty_port_tty_get(&active->port);
if (!tty_st) {
dbg("%s - bad tty pointer - exiting", __func__);
}
/* Port change. If port open push
* current data up to tty layer */
- if (dev_extra->open_ports > 0)
+ if (active_extra->open_count > 0)
tty_flip_buffer_push(tty_st);
dbg("Port Change: new port = %d",
0, 300);
}
+/**
+ * qt2_boxstoprx - Start and stop reception of data by the FPGA UART in
+ * response to requests from the tty layer
+ * @serial: pointer to the usb_serial structure for the parent device
+ * @uart_number: which UART on the device we are addressing
+ * @stop: Whether to start or stop data reception. Set to 1 to stop data being
+ * received, and to 0 to start it being received.
+ */
+static int qt2_boxstoprx(struct usb_serial *serial, unsigned short uart_number,
+ unsigned short stop)
+{
+ return usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ QT2_STOP_RECEIVE, 0x40, stop, uart_number, NULL, 0, 300);
+}
+
+
/*
* last things in file: stuff to register this driver into the generic
* USB serial framework.
.write = qt2_write,
.write_room = qt2_write_room,
.chars_in_buffer = qt2_chars_in_buffer,
- /*.throttle = qt_throttle,
- .unthrottle = qt_unthrottle,*/
+ .throttle = qt2_throttle,
+ .unthrottle = qt2_unthrottle,
.calc_num_ports = qt2_calc_num_ports,
.ioctl = qt2_ioctl,
.set_termios = qt2_set_termios,
- /*.break_ctl = qt_break,*/
+ .break_ctl = qt2_break,
.tiocmget = qt2_tiocmget,
.tiocmset = qt2_tiocmset,
.attach = qt2_attach,
projects / mv-sheeva.git / blobdiff