-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- rtmp_def.h
-
- Abstract:
- Miniport related definition header
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- Paul Lin 08-01-2002 created
- John Chang 08-05-2003 add definition for 11g & other drafts
-*/
-#ifndef __RTMP_DEF_H__
-#define __RTMP_DEF_H__
-
-#include "oid.h"
-
-//
-// Debug information verbosity: lower values indicate higher urgency
-//
-#define RT_DEBUG_OFF 0
-#define RT_DEBUG_ERROR 1
-#define RT_DEBUG_WARN 2
-#define RT_DEBUG_TRACE 3
-#define RT_DEBUG_INFO 4
-#define RT_DEBUG_LOUD 5
-
-#define NIC_TAG ((ULONG)'0682')
-#define NIC_DBG_STRING ("**RT28xx**")
-
-#ifdef SNMP_SUPPORT
-// for snmp
-// to get manufacturer OUI, kathy, 2008_0220
-#define ManufacturerOUI_LEN 3
-#define ManufacturerNAME ("Ralink Technology Company.")
-#define ResourceTypeIdName ("Ralink_ID")
-#endif
-
-
-//#define PACKED
-
-#define RALINK_2883_VERSION ((UINT32)0x28830300)
-#define RALINK_2880E_VERSION ((UINT32)0x28720200)
-#define RALINK_3070_VERSION ((UINT32)0x30700200)
-
-//
-// NDIS version in use by the NIC driver.
-// The high byte is the major version. The low byte is the minor version.
-//
-#ifdef NDIS51_MINIPORT
-#define NIC_DRIVER_VERSION 0x0501
-#else
-#define NIC_DRIVER_VERSION 0x0500
-#endif
-
-//
-// NDIS media type, current is ethernet, change if native wireless supported
-//
-#define NIC_MEDIA_TYPE NdisMedium802_3
-#define NIC_PCI_HDR_LENGTH 0xe2
-#define NIC_MAX_PACKET_SIZE 2304
-#define NIC_HEADER_SIZE 14
-#define MAX_MAP_REGISTERS_NEEDED 32
-#define MIN_MAP_REGISTERS_NEEDED 2 //Todo: should consider fragment issue.
-
-//
-// interface type, we use PCI
-//
-#define NIC_INTERFACE_TYPE NdisInterfacePci
-#define NIC_INTERRUPT_MODE NdisInterruptLevelSensitive
-
-//
-// buffer size passed in NdisMQueryAdapterResources
-// We should only need three adapter resources (IO, interrupt and memory),
-// Some devices get extra resources, so have room for 10 resources
-// UF_SIZE (sizeof(NDIS_RESOURCE_LIST) + (10*sizeof(CM_PARTIAL_RESOURCE_DESCRIPTOR)))
-
-
-#define NIC_RESOURCE_B//
-// IO space length
-//
-#define NIC_MAP_IOSPACE_LENGTH sizeof(CSR_STRUC)
-
-#define MAX_RX_PKT_LEN 1520
-
-//
-// Entry number for each DMA descriptor ring
-//
-
-
-#ifdef RT2870
-#define TX_RING_SIZE 8 // 1
-#define PRIO_RING_SIZE 8
-#define MGMT_RING_SIZE 32 // PRIO_RING_SIZE
-#define RX_RING_SIZE 8
-#define MAX_TX_PROCESS 4
-#define LOCAL_TXBUF_SIZE 2048
-#endif // RT2870 //
-
-#ifdef MULTIPLE_CARD_SUPPORT
-// MC: Multple Cards
-#define MAX_NUM_OF_MULTIPLE_CARD 32
-#endif // MULTIPLE_CARD_SUPPORT //
-
-#define MAX_RX_PROCESS 128 //64 //32
-#define NUM_OF_LOCAL_TXBUF 2
-#define TXD_SIZE 16
-#define TXWI_SIZE 16
-#define RXD_SIZE 16
-#define RXWI_SIZE 16
-// TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header
-#define TX_DMA_1ST_BUFFER_SIZE 96 // only the 1st physical buffer is pre-allocated
-#define MGMT_DMA_BUFFER_SIZE 1536 //2048
-#define RX_BUFFER_AGGRESIZE 3840 //3904 //3968 //4096 //2048 //4096
-#define RX_BUFFER_NORMSIZE 3840 //3904 //3968 //4096 //2048 //4096
-#define TX_BUFFER_NORMSIZE RX_BUFFER_NORMSIZE
-#define MAX_FRAME_SIZE 2346 // Maximum 802.11 frame size
-#define MAX_AGGREGATION_SIZE 3840 //3904 //3968 //4096
-#define MAX_NUM_OF_TUPLE_CACHE 2
-#define MAX_MCAST_LIST_SIZE 32
-#define MAX_LEN_OF_VENDOR_DESC 64
-//#define MAX_SIZE_OF_MCAST_PSQ (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ
-#define MAX_SIZE_OF_MCAST_PSQ 32
-
-#define MAX_RX_PROCESS_CNT (RX_RING_SIZE)
-
-
-#define MAX_PACKETS_IN_QUEUE (512) //(512) // to pass WMM A5-WPAPSK
-#define MAX_PACKETS_IN_MCAST_PS_QUEUE 32
-#define MAX_PACKETS_IN_PS_QUEUE 128 //32
-#define WMM_NUM_OF_AC 4 /* AC0, AC1, AC2, and AC3 */
-
-
-
-// RxFilter
-#define STANORMAL 0x17f97
-#define APNORMAL 0x15f97
-//
-// RTMP_ADAPTER flags
-//
-#define fRTMP_ADAPTER_MAP_REGISTER 0x00000001
-#define fRTMP_ADAPTER_INTERRUPT_IN_USE 0x00000002
-#define fRTMP_ADAPTER_HARDWARE_ERROR 0x00000004
-#define fRTMP_ADAPTER_SCATTER_GATHER 0x00000008
-#define fRTMP_ADAPTER_SEND_PACKET_ERROR 0x00000010
-#define fRTMP_ADAPTER_MLME_RESET_IN_PROGRESS 0x00000020
-#define fRTMP_ADAPTER_HALT_IN_PROGRESS 0x00000040
-#define fRTMP_ADAPTER_RESET_IN_PROGRESS 0x00000080
-#define fRTMP_ADAPTER_NIC_NOT_EXIST 0x00000100
-#define fRTMP_ADAPTER_TX_RING_ALLOCATED 0x00000200
-#define fRTMP_ADAPTER_REMOVE_IN_PROGRESS 0x00000400
-#define fRTMP_ADAPTER_MIMORATE_INUSED 0x00000800
-#define fRTMP_ADAPTER_RX_RING_ALLOCATED 0x00001000
-#define fRTMP_ADAPTER_INTERRUPT_ACTIVE 0x00002000
-#define fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS 0x00004000
-#define fRTMP_ADAPTER_REASSOC_IN_PROGRESS 0x00008000
-#define fRTMP_ADAPTER_MEDIA_STATE_PENDING 0x00010000
-#define fRTMP_ADAPTER_RADIO_OFF 0x00020000
-#define fRTMP_ADAPTER_BULKOUT_RESET 0x00040000
-#define fRTMP_ADAPTER_BULKIN_RESET 0x00080000
-#define fRTMP_ADAPTER_RDG_ACTIVE 0x00100000
-#define fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE 0x00200000
-#define fRTMP_ADAPTER_SCAN_2040 0x04000000
-#define fRTMP_ADAPTER_RADIO_MEASUREMENT 0x08000000
-
-#define fRTMP_ADAPTER_START_UP 0x10000000 //Devive already initialized and enabled Tx/Rx.
-#define fRTMP_ADAPTER_MEDIA_STATE_CHANGE 0x20000000
-#define fRTMP_ADAPTER_IDLE_RADIO_OFF 0x40000000
-
-// Lock bit for accessing different ring buffers
-//#define fRTMP_ADAPTER_TX_RING_BUSY 0x80000000
-//#define fRTMP_ADAPTER_MGMT_RING_BUSY 0x40000000
-//#define fRTMP_ADAPTER_ATIM_RING_BUSY 0x20000000
-//#define fRTMP_ADAPTER_RX_RING_BUSY 0x10000000
-
-// Lock bit for accessing different queue
-//#define fRTMP_ADAPTER_TX_QUEUE_BUSY 0x08000000
-//#define fRTMP_ADAPTER_MGMT_QUEUE_BUSY 0x04000000
-
-//
-// STA operation status flags
-//
-#define fOP_STATUS_INFRA_ON 0x00000001
-#define fOP_STATUS_ADHOC_ON 0x00000002
-#define fOP_STATUS_BG_PROTECTION_INUSED 0x00000004
-#define fOP_STATUS_SHORT_SLOT_INUSED 0x00000008
-#define fOP_STATUS_SHORT_PREAMBLE_INUSED 0x00000010
-#define fOP_STATUS_RECEIVE_DTIM 0x00000020
-//#define fOP_STATUS_TX_RATE_SWITCH_ENABLED 0x00000040
-#define fOP_STATUS_MEDIA_STATE_CONNECTED 0x00000080
-#define fOP_STATUS_WMM_INUSED 0x00000100
-#define fOP_STATUS_AGGREGATION_INUSED 0x00000200
-#define fOP_STATUS_DOZE 0x00000400 // debug purpose
-#define fOP_STATUS_PIGGYBACK_INUSED 0x00000800 // piggy-back, and aggregation
-#define fOP_STATUS_APSD_INUSED 0x00001000
-#define fOP_STATUS_TX_AMSDU_INUSED 0x00002000
-#define fOP_STATUS_MAX_RETRY_ENABLED 0x00004000
-#define fOP_STATUS_WAKEUP_NOW 0x00008000
-#define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE 0x00020000
-
-#ifdef DOT11N_DRAFT3
-#define fOP_STATUS_SCAN_2040 0x00040000
-#endif // DOT11N_DRAFT3 //
-
-#define CCKSETPROTECT 0x1
-#define OFDMSETPROTECT 0x2
-#define MM20SETPROTECT 0x4
-#define MM40SETPROTECT 0x8
-#define GF20SETPROTECT 0x10
-#define GR40SETPROTECT 0x20
-#define ALLN_SETPROTECT (GR40SETPROTECT | GF20SETPROTECT | MM40SETPROTECT | MM20SETPROTECT)
-
-//
-// AP's client table operation status flags
-//
-#define fCLIENT_STATUS_WMM_CAPABLE 0x00000001 // CLIENT can parse QOS DATA frame
-#define fCLIENT_STATUS_AGGREGATION_CAPABLE 0x00000002 // CLIENT can receive Ralink's proprietary TX aggregation frame
-#define fCLIENT_STATUS_PIGGYBACK_CAPABLE 0x00000004 // CLIENT support piggy-back
-#define fCLIENT_STATUS_AMSDU_INUSED 0x00000008
-#define fCLIENT_STATUS_SGI20_CAPABLE 0x00000010
-#define fCLIENT_STATUS_SGI40_CAPABLE 0x00000020
-#define fCLIENT_STATUS_TxSTBC_CAPABLE 0x00000040
-#define fCLIENT_STATUS_RxSTBC_CAPABLE 0x00000080
-#define fCLIENT_STATUS_HTC_CAPABLE 0x00000100
-#define fCLIENT_STATUS_RDG_CAPABLE 0x00000200
-#define fCLIENT_STATUS_MCSFEEDBACK_CAPABLE 0x00000400
-#define fCLIENT_STATUS_APSD_CAPABLE 0x00000800 /* UAPSD STATION */
-
-#ifdef DOT11N_DRAFT3
-#define fCLIENT_STATUS_BSSCOEXIST_CAPABLE 0x00001000
-#endif // DOT11N_DRAFT3 //
-
-#define fCLIENT_STATUS_RALINK_CHIPSET 0x00100000
-//
-// STA configuration flags
-//
-//#define fSTA_CFG_ENABLE_TX_BURST 0x00000001
-
-// 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case
-#define HT_NO_PROTECT 0
-#define HT_LEGACY_PROTECT 1
-#define HT_40_PROTECT 2
-#define HT_2040_PROTECT 3
-#define HT_RTSCTS_6M 7
-//following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE.
-#define HT_ATHEROS 8 // rt2860c has problem with atheros chip. we need to turn on RTS/CTS .
-#define HT_FORCERTSCTS 9 // Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary.
-
-//
-// RX Packet Filter control flags. Apply on pAd->PacketFilter
-//
-#define fRX_FILTER_ACCEPT_DIRECT NDIS_PACKET_TYPE_DIRECTED
-#define fRX_FILTER_ACCEPT_MULTICAST NDIS_PACKET_TYPE_MULTICAST
-#define fRX_FILTER_ACCEPT_BROADCAST NDIS_PACKET_TYPE_BROADCAST
-#define fRX_FILTER_ACCEPT_ALL_MULTICAST NDIS_PACKET_TYPE_ALL_MULTICAST
-
-//
-// Error code section
-//
-// NDIS_ERROR_CODE_ADAPTER_NOT_FOUND
-#define ERRLOG_READ_PCI_SLOT_FAILED 0x00000101L
-#define ERRLOG_WRITE_PCI_SLOT_FAILED 0x00000102L
-#define ERRLOG_VENDOR_DEVICE_NOMATCH 0x00000103L
-
-// NDIS_ERROR_CODE_ADAPTER_DISABLED
-#define ERRLOG_BUS_MASTER_DISABLED 0x00000201L
-
-// NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION
-#define ERRLOG_INVALID_SPEED_DUPLEX 0x00000301L
-#define ERRLOG_SET_SECONDARY_FAILED 0x00000302L
-
-// NDIS_ERROR_CODE_OUT_OF_RESOURCES
-#define ERRLOG_OUT_OF_MEMORY 0x00000401L
-#define ERRLOG_OUT_OF_SHARED_MEMORY 0x00000402L
-#define ERRLOG_OUT_OF_MAP_REGISTERS 0x00000403L
-#define ERRLOG_OUT_OF_BUFFER_POOL 0x00000404L
-#define ERRLOG_OUT_OF_NDIS_BUFFER 0x00000405L
-#define ERRLOG_OUT_OF_PACKET_POOL 0x00000406L
-#define ERRLOG_OUT_OF_NDIS_PACKET 0x00000407L
-#define ERRLOG_OUT_OF_LOOKASIDE_MEMORY 0x00000408L
-
-// NDIS_ERROR_CODE_HARDWARE_FAILURE
-#define ERRLOG_SELFTEST_FAILED 0x00000501L
-#define ERRLOG_INITIALIZE_ADAPTER 0x00000502L
-#define ERRLOG_REMOVE_MINIPORT 0x00000503L
-
-// NDIS_ERROR_CODE_RESOURCE_CONFLICT
-#define ERRLOG_MAP_IO_SPACE 0x00000601L
-#define ERRLOG_QUERY_ADAPTER_RESOURCES 0x00000602L
-#define ERRLOG_NO_IO_RESOURCE 0x00000603L
-#define ERRLOG_NO_INTERRUPT_RESOURCE 0x00000604L
-#define ERRLOG_NO_MEMORY_RESOURCE 0x00000605L
-
-
-// WDS definition
-#define MAX_WDS_ENTRY 4
-#define WDS_PAIRWISE_KEY_OFFSET 60 // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
-
-#define WDS_DISABLE_MODE 0
-#define WDS_RESTRICT_MODE 1
-#define WDS_BRIDGE_MODE 2
-#define WDS_REPEATER_MODE 3
-#define WDS_LAZY_MODE 4
-
-
-#define MAX_MESH_NUM 0
-
-#define MAX_APCLI_NUM 0
-
-#define MAX_MBSSID_NUM 1
-
-/* sanity check for apidx */
-#define MBSS_MR_APIDX_SANITY_CHECK(apidx) \
- { if (apidx > MAX_MBSSID_NUM) { \
- printk("%s> Error! apidx = %d > MAX_MBSSID_NUM!\n", __func__, apidx); \
- apidx = MAIN_MBSSID; } }
-
-#define VALID_WCID(_wcid) ((_wcid) > 0 && (_wcid) < MAX_LEN_OF_MAC_TABLE )
-
-#define MAIN_MBSSID 0
-#define FIRST_MBSSID 1
-
-
-#define MAX_BEACON_SIZE 512
-// If the MAX_MBSSID_NUM is larger than 6,
-// it shall reserve some WCID space(wcid 222~253) for beacon frames.
-// - these wcid 238~253 are reserved for beacon#6(ra6).
-// - these wcid 222~237 are reserved for beacon#7(ra7).
-#if defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 8)
-#define HW_RESERVED_WCID 222
-#elif defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 7)
-#define HW_RESERVED_WCID 238
-#else
-#define HW_RESERVED_WCID 255
-#endif
-
-// Then dedicate wcid of DFS and Carrier-Sense.
-#define DFS_CTS_WCID (HW_RESERVED_WCID - 1)
-#define CS_CTS_WCID (HW_RESERVED_WCID - 2)
-#define LAST_SPECIFIC_WCID (HW_RESERVED_WCID - 2)
-
-// If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211.
-// If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228.
-#define MAX_AVAILABLE_CLIENT_WCID (LAST_SPECIFIC_WCID - MAX_MBSSID_NUM - 1)
-
-// TX need WCID to find Cipher Key
-// these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8.
-#define GET_GroupKey_WCID(__wcid, __bssidx) \
- { \
- __wcid = LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM) + __bssidx; \
- }
-
-#define IsGroupKeyWCID(__wcid) (((__wcid) < LAST_SPECIFIC_WCID) && ((__wcid) >= (LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM))))
-
-
-// definition to support multiple BSSID
-#define BSS0 0
-#define BSS1 1
-#define BSS2 2
-#define BSS3 3
-#define BSS4 4
-#define BSS5 5
-#define BSS6 6
-#define BSS7 7
-
-
-//============================================================
-// Length definitions
-#define PEER_KEY_NO 2
-#define MAC_ADDR_LEN 6
-#define TIMESTAMP_LEN 8
-#define MAX_LEN_OF_SUPPORTED_RATES MAX_LENGTH_OF_SUPPORT_RATES // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
-#define MAX_LEN_OF_KEY 32 // 32 octets == 256 bits, Redefine for WPA
-#define MAX_NUM_OF_CHANNELS MAX_NUM_OF_CHS // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
-#define MAX_NUM_OF_11JCHANNELS 20 // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
-#define MAX_LEN_OF_SSID 32
-#define CIPHER_TEXT_LEN 128
-#define HASH_TABLE_SIZE 256
-#define MAX_VIE_LEN 1024 // New for WPA cipher suite variable IE sizes.
-#define MAX_SUPPORT_MCS 32
-
-//============================================================
-// ASIC WCID Table definition.
-//============================================================
-#define BSSID_WCID 1 // in infra mode, always put bssid with this WCID
-#define MCAST_WCID 0x0
-#define BSS0Mcast_WCID 0x0
-#define BSS1Mcast_WCID 0xf8
-#define BSS2Mcast_WCID 0xf9
-#define BSS3Mcast_WCID 0xfa
-#define BSS4Mcast_WCID 0xfb
-#define BSS5Mcast_WCID 0xfc
-#define BSS6Mcast_WCID 0xfd
-#define BSS7Mcast_WCID 0xfe
-#define RESERVED_WCID 0xff
-
-#define MAX_NUM_OF_ACL_LIST MAX_NUMBER_OF_ACL
-
-#define MAX_LEN_OF_MAC_TABLE MAX_NUMBER_OF_MAC // if MAX_MBSSID_NUM is 8, this value can't be larger than 211
-
-#if MAX_LEN_OF_MAC_TABLE>MAX_AVAILABLE_CLIENT_WCID
-#error MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!
-#endif
-
-#define MAX_NUM_OF_WDS_LINK_PERBSSID 3
-#define MAX_NUM_OF_WDS_LINK (MAX_NUM_OF_WDS_LINK_PERBSSID*MAX_MBSSID_NUM)
-#define MAX_NUM_OF_EVENT MAX_NUMBER_OF_EVENT
-#define WDS_LINK_START_WCID (MAX_LEN_OF_MAC_TABLE-1)
-
-#define NUM_OF_TID 8
-#define MAX_AID_BA 4
-#define MAX_LEN_OF_BA_REC_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)// (NUM_OF_TID*MAX_AID_BA + 32) //Block ACK recipient
-#define MAX_LEN_OF_BA_ORI_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)// (NUM_OF_TID*MAX_AID_BA + 32) // Block ACK originator
-#define MAX_LEN_OF_BSS_TABLE 64
-#define MAX_REORDERING_MPDU_NUM 512
-
-// key related definitions
-#define SHARE_KEY_NUM 4
-#define MAX_LEN_OF_SHARE_KEY 16 // byte count
-#define MAX_LEN_OF_PEER_KEY 16 // byte count
-#define PAIRWISE_KEY_NUM 64 // in MAC ASIC pairwise key table
-#define GROUP_KEY_NUM 4
-#define PMK_LEN 32
-#define WDS_PAIRWISE_KEY_OFFSET 60 // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
-#define PMKID_NO 4 // Number of PMKID saved supported
-#define MAX_LEN_OF_MLME_BUFFER 2048
-
-// power status related definitions
-#define PWR_ACTIVE 0
-#define PWR_SAVE 1
-#define PWR_MMPS 2 //MIMO power save
-//#define PWR_UNKNOWN 2
-
-// Auth and Assoc mode related definitions
-#define AUTH_MODE_OPEN 0x00
-#define AUTH_MODE_KEY 0x01
-//#define AUTH_MODE_AUTO_SWITCH 0x03
-//#define AUTH_MODE_DEAUTH 0x04
-//#define AUTH_MODE_UPLAYER 0x05 // reserved for 802.11i use
-
-// BSS Type definitions
-#define BSS_ADHOC 0 // = Ndis802_11IBSS
-#define BSS_INFRA 1 // = Ndis802_11Infrastructure
-#define BSS_ANY 2 // = Ndis802_11AutoUnknown
-#define BSS_MONITOR 3 // = Ndis802_11Monitor
-
-
-// Reason code definitions
-#define REASON_RESERVED 0
-#define REASON_UNSPECIFY 1
-#define REASON_NO_LONGER_VALID 2
-#define REASON_DEAUTH_STA_LEAVING 3
-#define REASON_DISASSOC_INACTIVE 4
-#define REASON_DISASSPC_AP_UNABLE 5
-#define REASON_CLS2ERR 6
-#define REASON_CLS3ERR 7
-#define REASON_DISASSOC_STA_LEAVING 8
-#define REASON_STA_REQ_ASSOC_NOT_AUTH 9
-#define REASON_INVALID_IE 13
-#define REASON_MIC_FAILURE 14
-#define REASON_4_WAY_TIMEOUT 15
-#define REASON_GROUP_KEY_HS_TIMEOUT 16
-#define REASON_IE_DIFFERENT 17
-#define REASON_MCIPHER_NOT_VALID 18
-#define REASON_UCIPHER_NOT_VALID 19
-#define REASON_AKMP_NOT_VALID 20
-#define REASON_UNSUPPORT_RSNE_VER 21
-#define REASON_INVALID_RSNE_CAP 22
-#define REASON_8021X_AUTH_FAIL 23
-#define REASON_CIPHER_SUITE_REJECTED 24
-#define REASON_DECLINED 37
-
-#define REASON_QOS_UNSPECIFY 32
-#define REASON_QOS_LACK_BANDWIDTH 33
-#define REASON_POOR_CHANNEL_CONDITION 34
-#define REASON_QOS_OUTSIDE_TXOP_LIMITION 35
-#define REASON_QOS_QSTA_LEAVING_QBSS 36
-#define REASON_QOS_UNWANTED_MECHANISM 37
-#define REASON_QOS_MECH_SETUP_REQUIRED 38
-#define REASON_QOS_REQUEST_TIMEOUT 39
-#define REASON_QOS_CIPHER_NOT_SUPPORT 45
-
-// Status code definitions
-#define MLME_SUCCESS 0
-#define MLME_UNSPECIFY_FAIL 1
-#define MLME_CANNOT_SUPPORT_CAP 10
-#define MLME_REASSOC_DENY_ASSOC_EXIST 11
-#define MLME_ASSOC_DENY_OUT_SCOPE 12
-#define MLME_ALG_NOT_SUPPORT 13
-#define MLME_SEQ_NR_OUT_OF_SEQUENCE 14
-#define MLME_REJ_CHALLENGE_FAILURE 15
-#define MLME_REJ_TIMEOUT 16
-#define MLME_ASSOC_REJ_UNABLE_HANDLE_STA 17
-#define MLME_ASSOC_REJ_DATA_RATE 18
-
-#define MLME_ASSOC_REJ_NO_EXT_RATE 22
-#define MLME_ASSOC_REJ_NO_EXT_RATE_PBCC 23
-#define MLME_ASSOC_REJ_NO_CCK_OFDM 24
-
-#define MLME_QOS_UNSPECIFY 32
-#define MLME_REQUEST_DECLINED 37
-#define MLME_REQUEST_WITH_INVALID_PARAM 38
-#define MLME_DLS_NOT_ALLOW_IN_QBSS 48
-#define MLME_DEST_STA_NOT_IN_QBSS 49
-#define MLME_DEST_STA_IS_NOT_A_QSTA 50
-
-#define MLME_INVALID_FORMAT 0x51
-#define MLME_FAIL_NO_RESOURCE 0x52
-#define MLME_STATE_MACHINE_REJECT 0x53
-#define MLME_MAC_TABLE_FAIL 0x54
-
-// IE code
-#define IE_SSID 0
-#define IE_SUPP_RATES 1
-#define IE_FH_PARM 2
-#define IE_DS_PARM 3
-#define IE_CF_PARM 4
-#define IE_TIM 5
-#define IE_IBSS_PARM 6
-#define IE_COUNTRY 7 // 802.11d
-#define IE_802_11D_REQUEST 10 // 802.11d
-#define IE_QBSS_LOAD 11 // 802.11e d9
-#define IE_EDCA_PARAMETER 12 // 802.11e d9
-#define IE_TSPEC 13 // 802.11e d9
-#define IE_TCLAS 14 // 802.11e d9
-#define IE_SCHEDULE 15 // 802.11e d9
-#define IE_CHALLENGE_TEXT 16
-#define IE_POWER_CONSTRAINT 32 // 802.11h d3.3
-#define IE_POWER_CAPABILITY 33 // 802.11h d3.3
-#define IE_TPC_REQUEST 34 // 802.11h d3.3
-#define IE_TPC_REPORT 35 // 802.11h d3.3
-#define IE_SUPP_CHANNELS 36 // 802.11h d3.3
-#define IE_CHANNEL_SWITCH_ANNOUNCEMENT 37 // 802.11h d3.3
-#define IE_MEASUREMENT_REQUEST 38 // 802.11h d3.3
-#define IE_MEASUREMENT_REPORT 39 // 802.11h d3.3
-#define IE_QUIET 40 // 802.11h d3.3
-#define IE_IBSS_DFS 41 // 802.11h d3.3
-#define IE_ERP 42 // 802.11g
-#define IE_TS_DELAY 43 // 802.11e d9
-#define IE_TCLAS_PROCESSING 44 // 802.11e d9
-#define IE_QOS_CAPABILITY 46 // 802.11e d6
-#define IE_HT_CAP 45 // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
-#define IE_AP_CHANNEL_REPORT 51 // 802.11k d6
-#define IE_HT_CAP2 52 // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
-#define IE_RSN 48 // 802.11i d3.0
-#define IE_WPA2 48 // WPA2
-#define IE_EXT_SUPP_RATES 50 // 802.11g
-#define IE_SUPP_REG_CLASS 59 // 802.11y. Supported regulatory classes.
-#define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT 60 // 802.11n
-#define IE_ADD_HT 61 // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
-#define IE_ADD_HT2 53 // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
-
-
-// For 802.11n D3.03
-//#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset elemet
-#define IE_SECONDARY_CH_OFFSET 62 // 802.11n D3.03 Secondary Channel Offset element
-#define IE_WAPI 68 // WAPI information element
-#define IE_2040_BSS_COEXIST 72 // 802.11n D3.0.3
-#define IE_2040_BSS_INTOLERANT_REPORT 73 // 802.11n D3.03
-#define IE_OVERLAPBSS_SCAN_PARM 74 // 802.11n D3.03
-#define IE_EXT_CAPABILITY 127 // 802.11n D3.03
-
-
-#define IE_WPA 221 // WPA
-#define IE_VENDOR_SPECIFIC 221 // Wifi WMM (WME)
-
-#define OUI_BROADCOM_HT 51 //
-#define OUI_BROADCOM_HTADD 52 //
-#define OUI_PREN_HT_CAP 51 //
-#define OUI_PREN_ADD_HT 52 //
-
-// CCX information
-#define IE_AIRONET_CKIP 133 // CCX1.0 ID 85H for CKIP
-#define IE_AP_TX_POWER 150 // CCX 2.0 for AP transmit power
-#define IE_MEASUREMENT_CAPABILITY 221 // CCX 2.0
-#define IE_CCX_V2 221
-#define IE_AIRONET_IPADDRESS 149 // CCX ID 95H for IP Address
-#define IE_AIRONET_CCKMREASSOC 156 // CCX ID 9CH for CCKM Reassociation Request element
-#define CKIP_NEGOTIATION_LENGTH 30
-#define AIRONET_IPADDRESS_LENGTH 10
-#define AIRONET_CCKMREASSOC_LENGTH 24
-
-// ========================================================
-// MLME state machine definition
-// ========================================================
-
-// STA MLME state mahcines
-#define ASSOC_STATE_MACHINE 1
-#define AUTH_STATE_MACHINE 2
-#define AUTH_RSP_STATE_MACHINE 3
-#define SYNC_STATE_MACHINE 4
-#define MLME_CNTL_STATE_MACHINE 5
-#define WPA_PSK_STATE_MACHINE 6
-#define LEAP_STATE_MACHINE 7
-#define AIRONET_STATE_MACHINE 8
-#define ACTION_STATE_MACHINE 9
-
-// AP MLME state machines
-#define AP_ASSOC_STATE_MACHINE 11
-#define AP_AUTH_STATE_MACHINE 12
-#define AP_AUTH_RSP_STATE_MACHINE 13
-#define AP_SYNC_STATE_MACHINE 14
-#define AP_CNTL_STATE_MACHINE 15
-#define AP_WPA_STATE_MACHINE 16
-
-#ifdef QOS_DLS_SUPPORT
-#define DLS_STATE_MACHINE 26
-#endif // QOS_DLS_SUPPORT //
-
-//
-// STA's CONTROL/CONNECT state machine: states, events, total function #
-//
-#define CNTL_IDLE 0
-#define CNTL_WAIT_DISASSOC 1
-#define CNTL_WAIT_JOIN 2
-#define CNTL_WAIT_REASSOC 3
-#define CNTL_WAIT_START 4
-#define CNTL_WAIT_AUTH 5
-#define CNTL_WAIT_ASSOC 6
-#define CNTL_WAIT_AUTH2 7
-#define CNTL_WAIT_OID_LIST_SCAN 8
-#define CNTL_WAIT_OID_DISASSOC 9
-#ifdef RT2870
-#define CNTL_WAIT_SCAN_FOR_CONNECT 10
-#endif // RT2870 //
-
-#define MT2_ASSOC_CONF 34
-#define MT2_AUTH_CONF 35
-#define MT2_DEAUTH_CONF 36
-#define MT2_DISASSOC_CONF 37
-#define MT2_REASSOC_CONF 38
-#define MT2_PWR_MGMT_CONF 39
-#define MT2_JOIN_CONF 40
-#define MT2_SCAN_CONF 41
-#define MT2_START_CONF 42
-#define MT2_GET_CONF 43
-#define MT2_SET_CONF 44
-#define MT2_RESET_CONF 45
-#define MT2_MLME_ROAMING_REQ 52
-
-#define CNTL_FUNC_SIZE 1
-
-//
-// STA's ASSOC state machine: states, events, total function #
-//
-#define ASSOC_IDLE 0
-#define ASSOC_WAIT_RSP 1
-#define REASSOC_WAIT_RSP 2
-#define DISASSOC_WAIT_RSP 3
-#define MAX_ASSOC_STATE 4
-
-#define ASSOC_MACHINE_BASE 0
-#define MT2_MLME_ASSOC_REQ 0
-#define MT2_MLME_REASSOC_REQ 1
-#define MT2_MLME_DISASSOC_REQ 2
-#define MT2_PEER_DISASSOC_REQ 3
-#define MT2_PEER_ASSOC_REQ 4
-#define MT2_PEER_ASSOC_RSP 5
-#define MT2_PEER_REASSOC_REQ 6
-#define MT2_PEER_REASSOC_RSP 7
-#define MT2_DISASSOC_TIMEOUT 8
-#define MT2_ASSOC_TIMEOUT 9
-#define MT2_REASSOC_TIMEOUT 10
-#define MAX_ASSOC_MSG 11
-
-#define ASSOC_FUNC_SIZE (MAX_ASSOC_STATE * MAX_ASSOC_MSG)
-
-//
-// ACT state machine: states, events, total function #
-//
-#define ACT_IDLE 0
-#define MAX_ACT_STATE 1
-
-#define ACT_MACHINE_BASE 0
-
-//Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self.
-//Category
-#define MT2_PEER_SPECTRUM_CATE 0
-#define MT2_PEER_QOS_CATE 1
-#define MT2_PEER_DLS_CATE 2
-#define MT2_PEER_BA_CATE 3
-#define MT2_PEER_PUBLIC_CATE 4
-#define MT2_PEER_RM_CATE 5
-#define MT2_PEER_HT_CATE 7 // 7.4.7
-#define MAX_PEER_CATE_MSG 7
-#define MT2_MLME_ADD_BA_CATE 8
-#define MT2_MLME_ORI_DELBA_CATE 9
-#define MT2_MLME_REC_DELBA_CATE 10
-#define MT2_MLME_QOS_CATE 11
-#define MT2_MLME_DLS_CATE 12
-#define MT2_ACT_INVALID 13
-#define MAX_ACT_MSG 14
-
-//Category field
-#define CATEGORY_SPECTRUM 0
-#define CATEGORY_QOS 1
-#define CATEGORY_DLS 2
-#define CATEGORY_BA 3
-#define CATEGORY_PUBLIC 4
-#define CATEGORY_RM 5
-#define CATEGORY_HT 7
-
-
-// DLS Action frame definition
-#define ACTION_DLS_REQUEST 0
-#define ACTION_DLS_RESPONSE 1
-#define ACTION_DLS_TEARDOWN 2
-
-//Spectrum Action field value 802.11h 7.4.1
-#define SPEC_MRQ 0 // Request
-#define SPEC_MRP 1 //Report
-#define SPEC_TPCRQ 2
-#define SPEC_TPCRP 3
-#define SPEC_CHANNEL_SWITCH 4
-
-
-//BA Action field value
-#define ADDBA_REQ 0
-#define ADDBA_RESP 1
-#define DELBA 2
-
-//Public's Action field value in Public Category. Some in 802.11y and some in 11n
-#define ACTION_BSS_2040_COEXIST 0 // 11n
-#define ACTION_DSE_ENABLEMENT 1 // 11y D9.0
-#define ACTION_DSE_DEENABLEMENT 2 // 11y D9.0
-#define ACTION_DSE_REG_LOCATION_ANNOUNCE 3 // 11y D9.0
-#define ACTION_EXT_CH_SWITCH_ANNOUNCE 4 // 11y D9.0
-#define ACTION_DSE_MEASUREMENT_REQ 5 // 11y D9.0
-#define ACTION_DSE_MEASUREMENT_REPORT 6 // 11y D9.0
-#define ACTION_MEASUREMENT_PILOT_ACTION 7 // 11y D9.0
-#define ACTION_DSE_POWER_CONSTRAINT 8 // 11y D9.0
-
-
-//HT Action field value
-#define NOTIFY_BW_ACTION 0
-#define SMPS_ACTION 1
-#define PSMP_ACTION 2
-#define SETPCO_ACTION 3
-#define MIMO_CHA_MEASURE_ACTION 4
-#define MIMO_N_BEACONFORM 5
-#define MIMO_BEACONFORM 6
-#define ANTENNA_SELECT 7
-#define HT_INFO_EXCHANGE 8
-
-#define ACT_FUNC_SIZE (MAX_ACT_STATE * MAX_ACT_MSG)
-//
-// STA's AUTHENTICATION state machine: states, evvents, total function #
-//
-#define AUTH_REQ_IDLE 0
-#define AUTH_WAIT_SEQ2 1
-#define AUTH_WAIT_SEQ4 2
-#define MAX_AUTH_STATE 3
-
-#define AUTH_MACHINE_BASE 0
-#define MT2_MLME_AUTH_REQ 0
-#define MT2_PEER_AUTH_EVEN 1
-#define MT2_AUTH_TIMEOUT 2
-#define MAX_AUTH_MSG 3
-
-#define AUTH_FUNC_SIZE (MAX_AUTH_STATE * MAX_AUTH_MSG)
-
-//
-// STA's AUTH_RSP state machine: states, events, total function #
-//
-#define AUTH_RSP_IDLE 0
-#define AUTH_RSP_WAIT_CHAL 1
-#define MAX_AUTH_RSP_STATE 2
-
-#define AUTH_RSP_MACHINE_BASE 0
-#define MT2_AUTH_CHALLENGE_TIMEOUT 0
-#define MT2_PEER_AUTH_ODD 1
-#define MT2_PEER_DEAUTH 2
-#define MAX_AUTH_RSP_MSG 3
-
-#define AUTH_RSP_FUNC_SIZE (MAX_AUTH_RSP_STATE * MAX_AUTH_RSP_MSG)
-
-//
-// STA's SYNC state machine: states, events, total function #
-//
-#define SYNC_IDLE 0 // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
-#define JOIN_WAIT_BEACON 1
-#define SCAN_LISTEN 2
-#define MAX_SYNC_STATE 3
-
-#define SYNC_MACHINE_BASE 0
-#define MT2_MLME_SCAN_REQ 0
-#define MT2_MLME_JOIN_REQ 1
-#define MT2_MLME_START_REQ 2
-#define MT2_PEER_BEACON 3
-#define MT2_PEER_PROBE_RSP 4
-#define MT2_PEER_ATIM 5
-#define MT2_SCAN_TIMEOUT 6
-#define MT2_BEACON_TIMEOUT 7
-#define MT2_ATIM_TIMEOUT 8
-#define MT2_PEER_PROBE_REQ 9
-#define MAX_SYNC_MSG 10
-
-#define SYNC_FUNC_SIZE (MAX_SYNC_STATE * MAX_SYNC_MSG)
-
-//Messages for the DLS state machine
-#define DLS_IDLE 0
-#define MAX_DLS_STATE 1
-
-#define DLS_MACHINE_BASE 0
-#define MT2_MLME_DLS_REQ 0
-#define MT2_PEER_DLS_REQ 1
-#define MT2_PEER_DLS_RSP 2
-#define MT2_MLME_DLS_TEAR_DOWN 3
-#define MT2_PEER_DLS_TEAR_DOWN 4
-#define MAX_DLS_MSG 5
-
-#define DLS_FUNC_SIZE (MAX_DLS_STATE * MAX_DLS_MSG)
-
-//
-// STA's WPA-PSK State machine: states, events, total function #
-//
-#define WPA_PSK_IDLE 0
-#define MAX_WPA_PSK_STATE 1
-
-#define WPA_MACHINE_BASE 0
-#define MT2_EAPPacket 0
-#define MT2_EAPOLStart 1
-#define MT2_EAPOLLogoff 2
-#define MT2_EAPOLKey 3
-#define MT2_EAPOLASFAlert 4
-#define MAX_WPA_PSK_MSG 5
-
-#define WPA_PSK_FUNC_SIZE (MAX_WPA_PSK_STATE * MAX_WPA_PSK_MSG)
-
-//
-// STA's CISCO-AIRONET State machine: states, events, total function #
-//
-#define AIRONET_IDLE 0
-#define AIRONET_SCANNING 1
-#define MAX_AIRONET_STATE 2
-
-#define AIRONET_MACHINE_BASE 0
-#define MT2_AIRONET_MSG 0
-#define MT2_AIRONET_SCAN_REQ 1
-#define MT2_AIRONET_SCAN_DONE 2
-#define MAX_AIRONET_MSG 3
-
-#define AIRONET_FUNC_SIZE (MAX_AIRONET_STATE * MAX_AIRONET_MSG)
-
-//
-// AP's CONTROL/CONNECT state machine: states, events, total function #
-//
-#define AP_CNTL_FUNC_SIZE 1
-
-//
-// AP's ASSOC state machine: states, events, total function #
-//
-#define AP_ASSOC_IDLE 0
-#define AP_MAX_ASSOC_STATE 1
-
-#define AP_ASSOC_MACHINE_BASE 0
-#define APMT2_MLME_DISASSOC_REQ 0
-#define APMT2_PEER_DISASSOC_REQ 1
-#define APMT2_PEER_ASSOC_REQ 2
-#define APMT2_PEER_REASSOC_REQ 3
-#define APMT2_CLS3ERR 4
-#define AP_MAX_ASSOC_MSG 5
-
-#define AP_ASSOC_FUNC_SIZE (AP_MAX_ASSOC_STATE * AP_MAX_ASSOC_MSG)
-
-//
-// AP's AUTHENTICATION state machine: states, events, total function #
-//
-#define AP_AUTH_REQ_IDLE 0
-#define AP_MAX_AUTH_STATE 1
-
-#define AP_AUTH_MACHINE_BASE 0
-#define APMT2_MLME_DEAUTH_REQ 0
-#define APMT2_CLS2ERR 1
-#define AP_MAX_AUTH_MSG 2
-
-#define AP_AUTH_FUNC_SIZE (AP_MAX_AUTH_STATE * AP_MAX_AUTH_MSG)
-
-//
-// AP's AUTH-RSP state machine: states, events, total function #
-//
-#define AP_AUTH_RSP_IDLE 0
-#define AP_MAX_AUTH_RSP_STATE 1
-
-#define AP_AUTH_RSP_MACHINE_BASE 0
-#define APMT2_AUTH_CHALLENGE_TIMEOUT 0
-#define APMT2_PEER_AUTH_ODD 1
-#define APMT2_PEER_DEAUTH 2
-#define AP_MAX_AUTH_RSP_MSG 3
-
-#define AP_AUTH_RSP_FUNC_SIZE (AP_MAX_AUTH_RSP_STATE * AP_MAX_AUTH_RSP_MSG)
-
-//
-// AP's SYNC state machine: states, events, total function #
-//
-#define AP_SYNC_IDLE 0
-#define AP_SCAN_LISTEN 1
-#define AP_MAX_SYNC_STATE 2
-
-#define AP_SYNC_MACHINE_BASE 0
-#define APMT2_PEER_PROBE_REQ 0
-#define APMT2_PEER_BEACON 1
-#define APMT2_MLME_SCAN_REQ 2
-#define APMT2_PEER_PROBE_RSP 3
-#define APMT2_SCAN_TIMEOUT 4
-#define APMT2_MLME_SCAN_CNCL 5
-#define AP_MAX_SYNC_MSG 6
-
-#define AP_SYNC_FUNC_SIZE (AP_MAX_SYNC_STATE * AP_MAX_SYNC_MSG)
-
-//
-// AP's WPA state machine: states, events, total function #
-//
-#define AP_WPA_PTK 0
-#define AP_MAX_WPA_PTK_STATE 1
-
-#define AP_WPA_MACHINE_BASE 0
-#define APMT2_EAPPacket 0
-#define APMT2_EAPOLStart 1
-#define APMT2_EAPOLLogoff 2
-#define APMT2_EAPOLKey 3
-#define APMT2_EAPOLASFAlert 4
-#define AP_MAX_WPA_MSG 5
-
-#define AP_WPA_FUNC_SIZE (AP_MAX_WPA_PTK_STATE * AP_MAX_WPA_MSG)
-
-// =============================================================================
-
-// value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header
-#define BTYPE_MGMT 0
-#define BTYPE_CNTL 1
-#define BTYPE_DATA 2
-
-// value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
-#define SUBTYPE_ASSOC_REQ 0
-#define SUBTYPE_ASSOC_RSP 1
-#define SUBTYPE_REASSOC_REQ 2
-#define SUBTYPE_REASSOC_RSP 3
-#define SUBTYPE_PROBE_REQ 4
-#define SUBTYPE_PROBE_RSP 5
-#define SUBTYPE_BEACON 8
-#define SUBTYPE_ATIM 9
-#define SUBTYPE_DISASSOC 10
-#define SUBTYPE_AUTH 11
-#define SUBTYPE_DEAUTH 12
-#define SUBTYPE_ACTION 13
-#define SUBTYPE_ACTION_NO_ACK 14
-
-// value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
-#define SUBTYPE_WRAPPER 7
-#define SUBTYPE_BLOCK_ACK_REQ 8
-#define SUBTYPE_BLOCK_ACK 9
-#define SUBTYPE_PS_POLL 10
-#define SUBTYPE_RTS 11
-#define SUBTYPE_CTS 12
-#define SUBTYPE_ACK 13
-#define SUBTYPE_CFEND 14
-#define SUBTYPE_CFEND_CFACK 15
-
-// value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
-#define SUBTYPE_DATA 0
-#define SUBTYPE_DATA_CFACK 1
-#define SUBTYPE_DATA_CFPOLL 2
-#define SUBTYPE_DATA_CFACK_CFPOLL 3
-#define SUBTYPE_NULL_FUNC 4
-#define SUBTYPE_CFACK 5
-#define SUBTYPE_CFPOLL 6
-#define SUBTYPE_CFACK_CFPOLL 7
-#define SUBTYPE_QDATA 8
-#define SUBTYPE_QDATA_CFACK 9
-#define SUBTYPE_QDATA_CFPOLL 10
-#define SUBTYPE_QDATA_CFACK_CFPOLL 11
-#define SUBTYPE_QOS_NULL 12
-#define SUBTYPE_QOS_CFACK 13
-#define SUBTYPE_QOS_CFPOLL 14
-#define SUBTYPE_QOS_CFACK_CFPOLL 15
-
-// ACK policy of QOS Control field bit 6:5
-#define NORMAL_ACK 0x00 // b6:5 = 00
-#define NO_ACK 0x20 // b6:5 = 01
-#define NO_EXPLICIT_ACK 0x40 // b6:5 = 10
-#define BLOCK_ACK 0x60 // b6:5 = 11
-
-//
-// rtmp_data.c use these definition
-//
-#define LENGTH_802_11 24
-#define LENGTH_802_11_AND_H 30
-#define LENGTH_802_11_CRC_H 34
-#define LENGTH_802_11_CRC 28
-#define LENGTH_802_11_WITH_ADDR4 30
-#define LENGTH_802_3 14
-#define LENGTH_802_3_TYPE 2
-#define LENGTH_802_1_H 8
-#define LENGTH_EAPOL_H 4
-#define LENGTH_WMMQOS_H 2
-#define LENGTH_CRC 4
-#define MAX_SEQ_NUMBER 0x0fff
-#define LENGTH_802_3_NO_TYPE 12
-#define LENGTH_802_1Q 4 /* VLAN related */
-
-// STA_CSR4.field.TxResult
-#define TX_RESULT_SUCCESS 0
-#define TX_RESULT_ZERO_LENGTH 1
-#define TX_RESULT_UNDER_RUN 2
-#define TX_RESULT_OHY_ERROR 4
-#define TX_RESULT_RETRY_FAIL 6
-
-// All PHY rate summary in TXD
-// Preamble MODE in TxD
-#define MODE_CCK 0
-#define MODE_OFDM 1
-#ifdef DOT11_N_SUPPORT
-#define MODE_HTMIX 2
-#define MODE_HTGREENFIELD 3
-#endif // DOT11_N_SUPPORT //
-// MCS for CCK. BW.SGI.STBC are reserved
-#define MCS_LONGP_RATE_1 0 // long preamble CCK 1Mbps
-#define MCS_LONGP_RATE_2 1 // long preamble CCK 1Mbps
-#define MCS_LONGP_RATE_5_5 2
-#define MCS_LONGP_RATE_11 3
-#define MCS_SHORTP_RATE_1 4 // long preamble CCK 1Mbps. short is forbidden in 1Mbps
-#define MCS_SHORTP_RATE_2 5 // short preamble CCK 2Mbps
-#define MCS_SHORTP_RATE_5_5 6
-#define MCS_SHORTP_RATE_11 7
-// To send duplicate legacy OFDM. set BW=BW_40. SGI.STBC are reserved
-#define MCS_RATE_6 0 // legacy OFDM
-#define MCS_RATE_9 1 // OFDM
-#define MCS_RATE_12 2 // OFDM
-#define MCS_RATE_18 3 // OFDM
-#define MCS_RATE_24 4 // OFDM
-#define MCS_RATE_36 5 // OFDM
-#define MCS_RATE_48 6 // OFDM
-#define MCS_RATE_54 7 // OFDM
-// HT
-#define MCS_0 0 // 1S
-#define MCS_1 1
-#define MCS_2 2
-#define MCS_3 3
-#define MCS_4 4
-#define MCS_5 5
-#define MCS_6 6
-#define MCS_7 7
-#define MCS_8 8 // 2S
-#define MCS_9 9
-#define MCS_10 10
-#define MCS_11 11
-#define MCS_12 12
-#define MCS_13 13
-#define MCS_14 14
-#define MCS_15 15
-#define MCS_16 16 // 3*3
-#define MCS_17 17
-#define MCS_18 18
-#define MCS_19 19
-#define MCS_20 20
-#define MCS_21 21
-#define MCS_22 22
-#define MCS_23 23
-#define MCS_32 32
-#define MCS_AUTO 33
-
-#ifdef DOT11_N_SUPPORT
-// OID_HTPHYMODE
-// MODE
-#define HTMODE_MM 0
-#define HTMODE_GF 1
-#endif // DOT11_N_SUPPORT //
-
-// Fixed Tx MODE - HT, CCK or OFDM
-#define FIXED_TXMODE_HT 0
-#define FIXED_TXMODE_CCK 1
-#define FIXED_TXMODE_OFDM 2
-// BW
-#define BW_20 BAND_WIDTH_20
-#define BW_40 BAND_WIDTH_40
-#define BW_BOTH BAND_WIDTH_BOTH
-#define BW_10 BAND_WIDTH_10 // 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.
-
-#ifdef DOT11_N_SUPPORT
-// SHORTGI
-#define GI_400 GAP_INTERVAL_400 // only support in HT mode
-#define GI_BOTH GAP_INTERVAL_BOTH
-#endif // DOT11_N_SUPPORT //
-#define GI_800 GAP_INTERVAL_800
-// STBC
-#define STBC_NONE 0
-#ifdef DOT11_N_SUPPORT
-#define STBC_USE 1 // limited use in rt2860b phy
-#define RXSTBC_ONE 1 // rx support of one spatial stream
-#define RXSTBC_TWO 2 // rx support of 1 and 2 spatial stream
-#define RXSTBC_THR 3 // rx support of 1~3 spatial stream
-// MCS FEEDBACK
-#define MCSFBK_NONE 0 // not support mcs feedback /
-#define MCSFBK_RSV 1 // reserved
-#define MCSFBK_UNSOLICIT 2 // only support unsolict mcs feedback
-#define MCSFBK_MRQ 3 // response to both MRQ and unsolict mcs feedback
-
-// MIMO power safe
-#define MMPS_STATIC 0
-#define MMPS_DYNAMIC 1
-#define MMPS_RSV 2
-#define MMPS_ENABLE 3
-
-
-// A-MSDU size
-#define AMSDU_0 0
-#define AMSDU_1 1
-
-#endif // DOT11_N_SUPPORT //
-
-// MCS use 7 bits
-#define TXRATEMIMO 0x80
-#define TXRATEMCS 0x7F
-#define TXRATEOFDM 0x7F
-#define RATE_1 0
-#define RATE_2 1
-#define RATE_5_5 2
-#define RATE_11 3
-#define RATE_6 4 // OFDM
-#define RATE_9 5 // OFDM
-#define RATE_12 6 // OFDM
-#define RATE_18 7 // OFDM
-#define RATE_24 8 // OFDM
-#define RATE_36 9 // OFDM
-#define RATE_48 10 // OFDM
-#define RATE_54 11 // OFDM
-#define RATE_FIRST_OFDM_RATE RATE_6
-#define RATE_LAST_OFDM_RATE RATE_54
-#define RATE_6_5 12 // HT mix
-#define RATE_13 13 // HT mix
-#define RATE_19_5 14 // HT mix
-#define RATE_26 15 // HT mix
-#define RATE_39 16 // HT mix
-#define RATE_52 17 // HT mix
-#define RATE_58_5 18 // HT mix
-#define RATE_65 19 // HT mix
-#define RATE_78 20 // HT mix
-#define RATE_104 21 // HT mix
-#define RATE_117 22 // HT mix
-#define RATE_130 23 // HT mix
-//#define RATE_AUTO_SWITCH 255 // for StaCfg.FixedTxRate only
-#define HTRATE_0 12
-#define RATE_FIRST_MM_RATE HTRATE_0
-#define RATE_FIRST_HT_RATE HTRATE_0
-#define RATE_LAST_HT_RATE HTRATE_0
-
-// pTxWI->txop
-#define IFS_HTTXOP 0 // The txop will be handles by ASIC.
-#define IFS_PIFS 1
-#define IFS_SIFS 2
-#define IFS_BACKOFF 3
-
-// pTxD->RetryMode
-#define LONG_RETRY 1
-#define SHORT_RETRY 0
-
-// Country Region definition
-#define REGION_MINIMUM_BG_BAND 0
-#define REGION_0_BG_BAND 0 // 1-11
-#define REGION_1_BG_BAND 1 // 1-13
-#define REGION_2_BG_BAND 2 // 10-11
-#define REGION_3_BG_BAND 3 // 10-13
-#define REGION_4_BG_BAND 4 // 14
-#define REGION_5_BG_BAND 5 // 1-14
-#define REGION_6_BG_BAND 6 // 3-9
-#define REGION_7_BG_BAND 7 // 5-13
-#define REGION_31_BG_BAND 31 // 5-13
-#define REGION_MAXIMUM_BG_BAND 7
-
-#define REGION_MINIMUM_A_BAND 0
-#define REGION_0_A_BAND 0 // 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
-#define REGION_1_A_BAND 1 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
-#define REGION_2_A_BAND 2 // 36, 40, 44, 48, 52, 56, 60, 64
-#define REGION_3_A_BAND 3 // 52, 56, 60, 64, 149, 153, 157, 161
-#define REGION_4_A_BAND 4 // 149, 153, 157, 161, 165
-#define REGION_5_A_BAND 5 // 149, 153, 157, 161
-#define REGION_6_A_BAND 6 // 36, 40, 44, 48
-#define REGION_7_A_BAND 7 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
-#define REGION_8_A_BAND 8 // 52, 56, 60, 64
-#define REGION_9_A_BAND 9 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165
-#define REGION_10_A_BAND 10 // 36, 40, 44, 48, 149, 153, 157, 161, 165
-#define REGION_11_A_BAND 11 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161
-#define REGION_MAXIMUM_A_BAND 11
-
-// pTxD->CipherAlg
-#define CIPHER_NONE 0
-#define CIPHER_WEP64 1
-#define CIPHER_WEP128 2
-#define CIPHER_TKIP 3
-#define CIPHER_AES 4
-#define CIPHER_CKIP64 5
-#define CIPHER_CKIP128 6
-#define CIPHER_TKIP_NO_MIC 7 // MIC appended by driver: not a valid value in hardware key table
-#define CIPHER_SMS4 8
-
-// value domain of pAd->RfIcType
-#define RFIC_2820 1 // 2.4G 2T3R
-#define RFIC_2850 2 // 2.4G/5G 2T3R
-#define RFIC_2720 3 // 2.4G 1T2R
-#define RFIC_2750 4 // 2.4G/5G 1T2R
-#define RFIC_3020 5 // 2.4G 1T1R
-#define RFIC_2020 6 // 2.4G B/G
-
-// LED Status.
-#define LED_LINK_DOWN 0
-#define LED_LINK_UP 1
-#define LED_RADIO_OFF 2
-#define LED_RADIO_ON 3
-#define LED_HALT 4
-#define LED_WPS 5
-#define LED_ON_SITE_SURVEY 6
-#define LED_POWER_UP 7
-
-// value domain of pAd->LedCntl.LedMode and E2PROM
-#define LED_MODE_DEFAULT 0
-#define LED_MODE_TWO_LED 1
-#define LED_MODE_SIGNAL_STREGTH 8 // EEPROM define =8
-
-// RC4 init value, used fro WEP & TKIP
-#define PPPINITFCS32 0xffffffff /* Initial FCS value */
-
-// value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition
-#define WPA_802_1X_PORT_SECURED 1
-#define WPA_802_1X_PORT_NOT_SECURED 2
-
-#define PAIRWISE_KEY 1
-#define GROUP_KEY 2
-
-//definition of DRS
-#define MAX_STEP_OF_TX_RATE_SWITCH 32
-
-
-// pre-allocated free NDIS PACKET/BUFFER poll for internal usage
-#define MAX_NUM_OF_FREE_NDIS_PACKET 128
-
-//Block ACK
-#define MAX_TX_REORDERBUF 64
-#define MAX_RX_REORDERBUF 64
-#define DEFAULT_TX_TIMEOUT 30
-#define DEFAULT_RX_TIMEOUT 30
-
-// definition of Recipient or Originator
-#define I_RECIPIENT TRUE
-#define I_ORIGINATOR FALSE
-
-#define DEFAULT_BBP_TX_POWER 0
-#define DEFAULT_RF_TX_POWER 5
-
-#define MAX_INI_BUFFER_SIZE 4096
-#define MAX_PARAM_BUFFER_SIZE (2048) // enough for ACL (18*64)
- //18 : the length of Mac address acceptable format "01:02:03:04:05:06;")
- //64 : MAX_NUM_OF_ACL_LIST
-// definition of pAd->OpMode
-#define OPMODE_STA 0
-#define OPMODE_AP 1
-//#define OPMODE_L3_BRG 2 // as AP and STA at the same time
-
-#ifdef RT_BIG_ENDIAN
-#define DIR_READ 0
-#define DIR_WRITE 1
-#define TYPE_TXD 0
-#define TYPE_RXD 1
-#define TYPE_TXINFO 0
-#define TYPE_RXINFO 1
-#define TYPE_TXWI 0
-#define TYPE_RXWI 1
-#endif
-
-// ========================= AP rtmp_def.h ===========================
-// value domain for pAd->EventTab.Log[].Event
-#define EVENT_RESET_ACCESS_POINT 0 // Log = "hh:mm:ss Restart Access Point"
-#define EVENT_ASSOCIATED 1 // Log = "hh:mm:ss STA 00:01:02:03:04:05 associated"
-#define EVENT_DISASSOCIATED 2 // Log = "hh:mm:ss STA 00:01:02:03:04:05 left this BSS"
-#define EVENT_AGED_OUT 3 // Log = "hh:mm:ss STA 00:01:02:03:04:05 was aged-out and removed from this BSS"
-#define EVENT_COUNTER_M 4
-#define EVENT_INVALID_PSK 5
-#define EVENT_MAX_EVENT_TYPE 6
-// ==== end of AP rtmp_def.h ============
-
-// definition RSSI Number
-#define RSSI_0 0
-#define RSSI_1 1
-#define RSSI_2 2
-
-// definition of radar detection
-#define RD_NORMAL_MODE 0 // Not found radar signal
-#define RD_SWITCHING_MODE 1 // Found radar signal, and doing channel switch
-#define RD_SILENCE_MODE 2 // After channel switch, need to be silence a while to ensure radar not found
-
-//Driver defined cid for mapping status and command.
-#define SLEEPCID 0x11
-#define WAKECID 0x22
-#define QUERYPOWERCID 0x33
-#define OWNERMCU 0x1
-#define OWNERCPU 0x0
-
-// MBSSID definition
-#define ENTRY_NOT_FOUND 0xFF
-
-
-/* After Linux 2.6.9,
- * VLAN module use Private (from user) interface flags (netdevice->priv_flags).
- * #define IFF_802_1Q_VLAN 0x1 -- 802.1Q VLAN device. in if.h
- * ref to ip_sabotage_out() [ out->priv_flags & IFF_802_1Q_VLAN ] in br_netfilter.c
- *
- * For this reason, we MUST use EVEN value in priv_flags
- */
-#define INT_MAIN 0x0100
-#define INT_MBSSID 0x0200
-#define INT_WDS 0x0300
-#define INT_APCLI 0x0400
-#define INT_MESH 0x0500
-
-// Use bitmap to allow coexist of ATE_TXFRAME and ATE_RXFRAME(i.e.,to support LoopBack mode)
-#ifdef RALINK_ATE
-#define ATE_START 0x00 // Start ATE
-#define ATE_STOP 0x80 // Stop ATE
-#define ATE_TXCONT 0x05 // Continuous Transmit
-#define ATE_TXCARR 0x09 // Transmit Carrier
-#define ATE_TXCARRSUPP 0x11 // Transmit Carrier Suppression
-#define ATE_TXFRAME 0x01 // Transmit Frames
-#define ATE_RXFRAME 0x02 // Receive Frames
-#ifdef RALINK_28xx_QA
-#define ATE_TXSTOP 0xe2 // Stop Transmition(i.e., TXCONT, TXCARR, TXCARRSUPP, and TXFRAME)
-#define ATE_RXSTOP 0xfd // Stop receiving Frames
-#define BBP22_TXFRAME 0x00 // Transmit Frames
-#define BBP22_TXCONT_OR_CARRSUPP 0x80 // Continuous Transmit or Carrier Suppression
-#define BBP22_TXCARR 0xc1 // Transmit Carrier
-#define BBP24_TXCONT 0x00 // Continuous Transmit
-#define BBP24_CARRSUPP 0x01 // Carrier Suppression
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-// WEP Key TYPE
-#define WEP_HEXADECIMAL_TYPE 0
-#define WEP_ASCII_TYPE 1
-
-
-
-// WIRELESS EVENTS definition
-/* Max number of char in custom event, refer to wireless_tools.28/wireless.20.h */
-#define IW_CUSTOM_MAX_LEN 255 /* In bytes */
-
-// For system event - start
-#define IW_SYS_EVENT_FLAG_START 0x0200
-#define IW_ASSOC_EVENT_FLAG 0x0200
-#define IW_DISASSOC_EVENT_FLAG 0x0201
-#define IW_DEAUTH_EVENT_FLAG 0x0202
-#define IW_AGEOUT_EVENT_FLAG 0x0203
-#define IW_COUNTER_MEASURES_EVENT_FLAG 0x0204
-#define IW_REPLAY_COUNTER_DIFF_EVENT_FLAG 0x0205
-#define IW_RSNIE_DIFF_EVENT_FLAG 0x0206
-#define IW_MIC_DIFF_EVENT_FLAG 0x0207
-#define IW_ICV_ERROR_EVENT_FLAG 0x0208
-#define IW_MIC_ERROR_EVENT_FLAG 0x0209
-#define IW_GROUP_HS_TIMEOUT_EVENT_FLAG 0x020A
-#define IW_PAIRWISE_HS_TIMEOUT_EVENT_FLAG 0x020B
-#define IW_RSNIE_SANITY_FAIL_EVENT_FLAG 0x020C
-#define IW_SET_KEY_DONE_WPA1_EVENT_FLAG 0x020D
-#define IW_SET_KEY_DONE_WPA2_EVENT_FLAG 0x020E
-#define IW_STA_LINKUP_EVENT_FLAG 0x020F
-#define IW_STA_LINKDOWN_EVENT_FLAG 0x0210
-#define IW_SCAN_COMPLETED_EVENT_FLAG 0x0211
-#define IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG 0x0212
-// if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END
-#define IW_SYS_EVENT_FLAG_END 0x0212
-#define IW_SYS_EVENT_TYPE_NUM (IW_SYS_EVENT_FLAG_END - IW_SYS_EVENT_FLAG_START + 1)
-// For system event - end
-
-// For spoof attack event - start
-#define IW_SPOOF_EVENT_FLAG_START 0x0300
-#define IW_CONFLICT_SSID_EVENT_FLAG 0x0300
-#define IW_SPOOF_ASSOC_RESP_EVENT_FLAG 0x0301
-#define IW_SPOOF_REASSOC_RESP_EVENT_FLAG 0x0302
-#define IW_SPOOF_PROBE_RESP_EVENT_FLAG 0x0303
-#define IW_SPOOF_BEACON_EVENT_FLAG 0x0304
-#define IW_SPOOF_DISASSOC_EVENT_FLAG 0x0305
-#define IW_SPOOF_AUTH_EVENT_FLAG 0x0306
-#define IW_SPOOF_DEAUTH_EVENT_FLAG 0x0307
-#define IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG 0x0308
-#define IW_REPLAY_ATTACK_EVENT_FLAG 0x0309
-// if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END
-#define IW_SPOOF_EVENT_FLAG_END 0x0309
-#define IW_SPOOF_EVENT_TYPE_NUM (IW_SPOOF_EVENT_FLAG_END - IW_SPOOF_EVENT_FLAG_START + 1)
-// For spoof attack event - end
-
-// For flooding attack event - start
-#define IW_FLOOD_EVENT_FLAG_START 0x0400
-#define IW_FLOOD_AUTH_EVENT_FLAG 0x0400
-#define IW_FLOOD_ASSOC_REQ_EVENT_FLAG 0x0401
-#define IW_FLOOD_REASSOC_REQ_EVENT_FLAG 0x0402
-#define IW_FLOOD_PROBE_REQ_EVENT_FLAG 0x0403
-#define IW_FLOOD_DISASSOC_EVENT_FLAG 0x0404
-#define IW_FLOOD_DEAUTH_EVENT_FLAG 0x0405
-#define IW_FLOOD_EAP_REQ_EVENT_FLAG 0x0406
-// if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END
-#define IW_FLOOD_EVENT_FLAG_END 0x0406
-#define IW_FLOOD_EVENT_TYPE_NUM (IW_FLOOD_EVENT_FLAG_END - IW_FLOOD_EVENT_FLAG_START + 1)
-// For flooding attack - end
-
-// End - WIRELESS EVENTS definition
-
-#ifdef CONFIG_STA_SUPPORT
-// definition for DLS, kathy
-#define MAX_NUM_OF_INIT_DLS_ENTRY 1
-#define MAX_NUM_OF_DLS_ENTRY MAX_NUMBER_OF_DLS_ENTRY
-
-//Block ACK , rt2860, kathy
-#define MAX_TX_REORDERBUF 64
-#define MAX_RX_REORDERBUF 64
-#define DEFAULT_TX_TIMEOUT 30
-#define DEFAULT_RX_TIMEOUT 30
-#ifndef CONFIG_AP_SUPPORT
-#define MAX_BARECI_SESSION 8
-#endif
-
-#ifndef IW_ESSID_MAX_SIZE
-/* Maximum size of the ESSID and pAd->nickname strings */
-#define IW_ESSID_MAX_SIZE 32
-#endif
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef MCAST_RATE_SPECIFIC
-#define MCAST_DISABLE 0
-#define MCAST_CCK 1
-#define MCAST_OFDM 2
-#define MCAST_HTMIX 3
-#endif // MCAST_RATE_SPECIFIC //
-
-// For AsicRadioOff/AsicRadioOn function
-#define DOT11POWERSAVE 0
-#define GUIRADIO_OFF 1
-#define RTMP_HALT 2
-#define GUI_IDLE_POWER_SAVE 3
-// --
-
-
-// definition for WpaSupport flag
-#define WPA_SUPPLICANT_DISABLE 0
-#define WPA_SUPPLICANT_ENABLE 1
-#define WPA_SUPPLICANT_ENABLE_WITH_WEB_UI 2
-
-// Endian byte swapping codes
-#define SWAP16(x) \
- ((UINT16)( \
- (((UINT16)(x) & (UINT16) 0x00ffU) << 8) | \
- (((UINT16)(x) & (UINT16) 0xff00U) >> 8) ))
-
-#define SWAP32(x) \
- ((UINT32)( \
- (((UINT32)(x) & (UINT32) 0x000000ffUL) << 24) | \
- (((UINT32)(x) & (UINT32) 0x0000ff00UL) << 8) | \
- (((UINT32)(x) & (UINT32) 0x00ff0000UL) >> 8) | \
- (((UINT32)(x) & (UINT32) 0xff000000UL) >> 24) ))
-
-#define SWAP64(x) \
- ((UINT64)( \
- (UINT64)(((UINT64)(x) & (UINT64) 0x00000000000000ffULL) << 56) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x000000000000ff00ULL) << 40) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x0000000000ff0000ULL) << 24) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x00000000ff000000ULL) << 8) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x000000ff00000000ULL) >> 8) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x0000ff0000000000ULL) >> 24) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x00ff000000000000ULL) >> 40) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0xff00000000000000ULL) >> 56) ))
-
-#ifdef RT_BIG_ENDIAN
-
-#define cpu2le64(x) SWAP64((x))
-#define le2cpu64(x) SWAP64((x))
-#define cpu2le32(x) SWAP32((x))
-#define le2cpu32(x) SWAP32((x))
-#define cpu2le16(x) SWAP16((x))
-#define le2cpu16(x) SWAP16((x))
-#define cpu2be64(x) ((UINT64)(x))
-#define be2cpu64(x) ((UINT64)(x))
-#define cpu2be32(x) ((UINT32)(x))
-#define be2cpu32(x) ((UINT32)(x))
-#define cpu2be16(x) ((UINT16)(x))
-#define be2cpu16(x) ((UINT16)(x))
-
-#else // Little_Endian
-
-#define cpu2le64(x) ((UINT64)(x))
-#define le2cpu64(x) ((UINT64)(x))
-#define cpu2le32(x) ((UINT32)(x))
-#define le2cpu32(x) ((UINT32)(x))
-#define cpu2le16(x) ((UINT16)(x))
-#define le2cpu16(x) ((UINT16)(x))
-#define cpu2be64(x) SWAP64((x))
-#define be2cpu64(x) SWAP64((x))
-#define cpu2be32(x) SWAP32((x))
-#define be2cpu32(x) SWAP32((x))
-#define cpu2be16(x) SWAP16((x))
-#define be2cpu16(x) SWAP16((x))
-
-#endif // RT_BIG_ENDIAN
-
-#endif // __RTMP_DEF_H__
-
-
+#include "../rt2860/rtmp_def.h"