#include <linux/random.h>
#include <linux/version.h>
#include <asm/io.h>
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
-#include <asm/semaphore.h>
-#endif
-#include "ieee80211.h"
-#ifdef RTL8192SU
+#include "ieee80211/ieee80211.h"
+
#include "r8192S_firmware.h"
-#else
-#include "r819xU_firmware.h"
-#endif
//#define RTL8192U
#define RTL819xU_MODULE_NAME "rtl819xU"
// Rx smooth factor
#define Rx_Smooth_Factor 20
-#if 0 //we need to use RT_TRACE instead DMESG as RT_TRACE will clearly show debug level wb.
-#define DMESG(x,a...) printk(KERN_INFO RTL819xU_MODULE_NAME ": " x "\n", ## a)
-#define DMESGW(x,a...) printk(KERN_WARNING RTL819xU_MODULE_NAME ": WW:" x "\n", ## a)
-#define DMESGE(x,a...) printk(KERN_WARNING RTL819xU_MODULE_NAME ": EE:" x "\n", ## a)
-#else
#define DMESG(x,a...)
#define DMESGW(x,a...)
#define DMESGE(x,a...)
#define COMP_DOWN BIT29 //for rm driver module
#define COMP_RESET BIT30 //for silent reset
#define COMP_ERR BIT31 //for error out, always on
-#endif
#define RTL819x_DEBUG
#ifdef RTL819x_DEBUG
#define OFDM_Table_Length 19
#define CCK_Table_length 12
-#ifdef RTL8192SU
//
//Tx Descriptor for RLT8192SU(Normal mode)
//
u8 RxAGC3;
u8 RxAGC4;
}tx_status_desc_8192s_usb, *ptx_status_desc_8192s_usb;
-#else
-/* for rtl819x */
-typedef struct _tx_desc_819x_usb {
- //DWORD 0
- u16 PktSize;
- u8 Offset;
- u8 Reserved0:3;
- u8 CmdInit:1;
- u8 LastSeg:1;
- u8 FirstSeg:1;
- u8 LINIP:1;
- u8 OWN:1;
-
- //DWORD 1
- u8 TxFWInfoSize;
- u8 RATid:3;
- u8 DISFB:1;
- u8 USERATE:1;
- u8 MOREFRAG:1;
- u8 NoEnc:1;
- u8 PIFS:1;
- u8 QueueSelect:5;
- u8 NoACM:1;
- u8 Reserved1:2;
- u8 SecCAMID:5;
- u8 SecDescAssign:1;
- u8 SecType:2;
-
- //DWORD 2
- u16 TxBufferSize;
- //u16 Reserved2;
- u8 ResvForPaddingLen:7;
- u8 Reserved3:1;
- u8 Reserved4;
-
- //DWORD 3, 4, 5
- u32 Reserved5;
- u32 Reserved6;
- u32 Reserved7;
-}tx_desc_819x_usb, *ptx_desc_819x_usb;
-#endif
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
-typedef struct _tx_desc_819x_usb_aggr_subframe {
- //DWORD 0
- u16 PktSize;
- u8 Offset;
- u8 TxFWInfoSize;
-
- //DWORD 1
- u8 RATid:3;
- u8 DISFB:1;
- u8 USERATE:1;
- u8 MOREFRAG:1;
- u8 NoEnc:1;
- u8 PIFS:1;
- u8 QueueSelect:5;
- u8 NoACM:1;
- u8 Reserved1:2;
- u8 SecCAMID:5;
- u8 SecDescAssign:1;
- u8 SecType:2;
- u8 PacketID:7;
- u8 OWN:1;
-}tx_desc_819x_usb_aggr_subframe, *ptx_desc_819x_usb_aggr_subframe;
-#endif
-#ifdef RTL8192SU
//
//Tx Descriptor for RLT8192SU(Load FW mode)
//
// DWORD 1
u32 Rsvd0;
}tx_h2c_cmd_hdr_8192s_usb, *ptx_h2c_cmd_hdr_8192s_usb;
-#else
-typedef struct _tx_desc_cmd_819x_usb {
- //DWORD 0
- u16 Reserved0;
- u8 Reserved1;
- u8 Reserved2:3;
- u8 CmdInit:1;
- u8 LastSeg:1;
- u8 FirstSeg:1;
- u8 LINIP:1;
- u8 OWN:1;
-
- //DOWRD 1
- //u32 Reserved3;
- u8 TxFWInfoSize;
- u8 Reserved3;
- u8 QueueSelect;
- u8 Reserved4;
-
- //DOWRD 2
- u16 TxBufferSize;
- u16 Reserved5;
-
- //DWORD 3,4,5
- //u32 TxBufferAddr;
- //u32 NextDescAddress;
- u32 Reserved6;
- u32 Reserved7;
- u32 Reserved8;
-}tx_desc_cmd_819x_usb, *ptx_desc_cmd_819x_usb;
-#endif
-#ifdef RTL8192SU
typedef struct _tx_fwinfo_819x_usb{
//DWORD 0
u8 TxRate:7;
u32 Tx_INFO_RSVD:6;
u32 PacketID:13;
}tx_fwinfo_819x_usb, *ptx_fwinfo_819x_usb;
-#else
-typedef struct _tx_fwinfo_819x_usb {
- //DOWRD 0
- u8 TxRate:7;
- u8 CtsEnable:1;
- u8 RtsRate:7;
- u8 RtsEnable:1;
- u8 TxHT:1;
- u8 Short:1; //Short PLCP for CCK, or short GI for 11n MCS
- u8 TxBandwidth:1; // This is used for HT MCS rate only.
- u8 TxSubCarrier:2; // This is used for legacy OFDM rate only.
- u8 STBC:2;
- u8 AllowAggregation:1;
- u8 RtsHT:1; //Interpre RtsRate field as high throughput data rate
- u8 RtsShort:1; //Short PLCP for CCK, or short GI for 11n MCS
- u8 RtsBandwidth:1; // This is used for HT MCS rate only.
- u8 RtsSubcarrier:2; // This is used for legacy OFDM rate only.
- u8 RtsSTBC:2;
- u8 EnableCPUDur:1; //Enable firmware to recalculate and assign packet duration
-
- //DWORD 1
- u32 RxMF:2;
- u32 RxAMD:3;
- u32 TxPerPktInfoFeedback:1;//1 indicate Tx info gathtered by firmware and returned by Rx Cmd
- u32 Reserved1:2;
- u32 TxAGCOffSet:4;
- u32 TxAGCSign:1;
- u32 Tx_INFO_RSVD:6;
- u32 PacketID:13;
- //u32 Reserved;
-}tx_fwinfo_819x_usb, *ptx_fwinfo_819x_usb;
-#endif
typedef struct rtl8192_rx_info {
struct urb *urb;
u8 out_pipe;
}rtl8192_rx_info ;
-#ifdef RTL8192SU
//typedef struct _RX_DESC_STATUS_8192SU{
typedef struct rx_desc_819x_usb{
//DWORD 0
//DWORD 2
u16 Seq:12;
u16 Frag:4;
-#ifdef USB_RX_AGGREGATION_SUPPORT
- u8 UsbAggPktNum;//:8;
-#else
u8 NextPktLen;//:8;
-#endif
u8 Rsvd0:6;
u8 NextIND:1;
u8 Rsvd1:1;
u32 TSFL;
//}RX_DESC_STATUS_8192SU, *PRX_DESC_STATUS_8192SU;
}rx_desc_819x_usb, *prx_desc_819x_usb;
-#else
-typedef struct rx_desc_819x_usb{
- //DOWRD 0
- u16 Length:14;
- u16 CRC32:1;
- u16 ICV:1;
- u8 RxDrvInfoSize;
- u8 Shift:2;
- u8 PHYStatus:1;
- u8 SWDec:1;
- //u8 LastSeg:1;
- //u8 FirstSeg:1;
- //u8 EOR:1;
- //u8 OWN:1;
- u8 Reserved1:4;
-
- //DWORD 1
- u32 Reserved2;
-
- //DWORD 2
- //u32 Reserved3;
-
- //DWORD 3
- //u32 BufferAddress;
-
-}rx_desc_819x_usb, *prx_desc_819x_usb;
-#endif
-#ifdef USB_RX_AGGREGATION_SUPPORT
-typedef struct _rx_desc_819x_usb_aggr_subframe{
- //DOWRD 0
- u16 Length:14;
- u16 CRC32:1;
- u16 ICV:1;
- u8 Offset;
- u8 RxDrvInfoSize;
- //DOWRD 1
- u8 Shift:2;
- u8 PHYStatus:1;
- u8 SWDec:1;
- u8 Reserved1:4;
- u8 Reserved2;
- u16 Reserved3;
- //DWORD 2
- //u4Byte Reserved3;
- //DWORD 3
- //u4Byte BufferAddress;
-}rx_desc_819x_usb_aggr_subframe, *prx_desc_819x_usb_aggr_subframe;
-#endif
-#ifdef RTL8192SU
//
// Driver info are written to the begining of the RxBuffer
//
u8 reserve:4;
}rx_drvinfo_819x_usb, *prx_drvinfo_819x_usb;
-#else
-typedef struct rx_drvinfo_819x_usb{
- //DWORD 0
- u16 Reserved1:12;
- u16 PartAggr:1;
- u16 FirstAGGR:1;
- u16 Reserved2:2;
-
- u8 RxRate:7;
- u8 RxHT:1;
-
- u8 BW:1;
- u8 SPLCP:1;
- u8 Reserved3:2;
- u8 PAM:1;
- u8 Mcast:1;
- u8 Bcast:1;
- u8 Reserved4:1;
-
- //DWORD 1
- u32 TSFL;
-
-}rx_drvinfo_819x_usb, *prx_drvinfo_819x_usb;
-#endif
#define HWSET_MAX_SIZE_92S 128
-#ifdef RTL8192SU
#define MAX_802_11_HEADER_LENGTH 40
#define MAX_PKT_AGG_NUM 256
#define TX_PACKET_SHIFT_BYTES USB_HWDESC_HEADER_LEN
-#else
- #define MAX_802_11_HEADER_LENGTH (40 + MAX_FIRMWARE_INFORMATION_SIZE)
- #define MAX_PKT_AGG_NUM 64
- #define TX_PACKET_SHIFT_BYTES (USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb))
-#endif
#define MAX_DEV_ADDR_SIZE 8 /* support till 64 bit bus width OS */
#define MAX_FIRMWARE_INFORMATION_SIZE 32 /*2006/04/30 by Emily forRTL8190*/
//#define TX_PACKET_SHIFT_BYTES (USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb))
#define MAX_FRAGMENT_COUNT 8
#ifdef RTL8192U
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
-#define MAX_TRANSMIT_BUFFER_SIZE 32000
-#else
#define MAX_TRANSMIT_BUFFER_SIZE 8000
-#endif
#else
#define MAX_TRANSMIT_BUFFER_SIZE (1600+(MAX_802_11_HEADER_LENGTH+ENCRYPTION_MAX_OVERHEAD)*MAX_FRAGMENT_COUNT)
#endif
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
-#define TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES (sizeof(tx_desc_819x_usb_aggr_subframe) + sizeof(tx_fwinfo_819x_usb))
-#endif
#define scrclng 4 // octets for crc32 (FCS, ICV)
typedef enum rf_optype
}RTL8192SUSB_LOOPBACK_E;
//#endif
-
-#if 0
-/* due to rtl8192 firmware */
-typedef enum _desc_packet_type_e{
- DESC_PACKET_TYPE_INIT = 0,
- DESC_PACKET_TYPE_NORMAL = 1,
-}desc_packet_type_e;
-
-typedef enum _firmware_source{
- FW_SOURCE_IMG_FILE = 0,
- FW_SOURCE_HEADER_FILE = 1, //from header file
-}firmware_source_e, *pfirmware_source_e;
-
-typedef enum _firmware_status{
- FW_STATUS_0_INIT = 0,
- FW_STATUS_1_MOVE_BOOT_CODE = 1,
- FW_STATUS_2_MOVE_MAIN_CODE = 2,
- FW_STATUS_3_TURNON_CPU = 3,
- FW_STATUS_4_MOVE_DATA_CODE = 4,
- FW_STATUS_5_READY = 5,
-}firmware_status_e;
-
-typedef struct _rt_firmare_seg_container {
- u16 seg_size;
- u8 *seg_ptr;
-}fw_seg_container, *pfw_seg_container;
-
-#ifdef RTL8192SU
-//--------------------------------------------------------------------------------
-// 8192S Firmware related
-//--------------------------------------------------------------------------------
-typedef struct _RT_8192S_FIRMWARE_PRIV { //8-bytes alignment required
-
- //--- LONG WORD 0 ----
- u32 RegulatoryClass;
- u32 Rfintfs;
-
- //--- LONG WORD 1 ----
- u32 ChipVer;
- u32 HCISel;
-
- //--- LONG WORD 2 ----
- u32 IBKMode;
- u32 Rsvd00;
-
- //--- LONG WORD 3 ----
- u32 Rsvd01;
- u8 Qos_En; // QoS enable
- u8 En40MHz; // 40MHz BW enable
- u8 AMSDU2AMPDU_En; //14181 convert AMSDU to AMPDU, 0: disable
- u8 AMPDU_En; //111n AMPDU/AMSDU enable
-
- //--- LONG WORD 4 ----
- u8 rate_control_offload;//FW offloads, 0: driver handles
- u8 aggregation_offload; // FW offloads, 0: driver handles
- u8 beacon_offload; //FW offloads, 0: driver handles
- u8 MLME_offload; // FW offloads, 0: driver handles
- u8 hwpc_offload; // FW offloads, 0: driver handles
- u8 tcp_checksum_offload; //FW offloads, 0: driver handles
- u8 tcp_offload; //FW offloads, 0: driver handles
- u8 ps_control_offload; //FW offloads, 0: driver handles
-
- //--- LONG WORD 5 ----
- u8 WWLAN_Offload; // FW offloads, 0: driver handles
- u8 MPMode; // normal mode, 0: MP mode;
- u16 Version; //0x8000 ~ 0x8FFF for FPGA version, 0x0000 ~ 0x7FFF for ASIC version,
- u16 Signature; //0x12: 8712, 0x92: 8192S
- u16 Rsvd11;
-
-// u32 rsvd1;
-// u32 wireless_band; //no A-band exists in 8712
-}RT_8192S_FIRMWARE_PRIV, *PRT_8192S_FIRMWARE_PRIV;
-
-typedef struct _RT_8192S_FIRMWARE_HDR {//8-byte alinment required
-
- //--- LONG WORD 0 ----
- u16 Signature;
- u16 Version; //0x8000 ~ 0x8FFF for FPGA version, 0x0000 ~ 0x7FFF for ASIC version,
- u32 DMEMSize; //define the size of boot loader
-
-
- //--- LONG WORD 1 ----
- u32 IMG_IMEM_SIZE; //define the size of FW in IMEM
- u32 IMG_SRAM_SIZE; //define the size of FW in SRAM
-
- //--- LONG WORD 2 ----
- u32 FW_PRIV_SIZE; //define the size of DMEM variable
- u32 Rsvd0;
-
- //--- LONG WORD 3 ----
- u32 Rsvd1;
- u32 Rsvd2;
-
- RT_8192S_FIRMWARE_PRIV FWPriv;
-
-}RT_8192S_FIRMWARE_HDR, *PRT_8192S_FIRMWARE_HDR;
-
-#define RT_8192S_FIRMWARE_HDR_SIZE 80
-
-typedef enum _FIRMWARE_8192S_STATUS{
- FW_STATUS_INIT = 0,
- FW_STATUS_LOAD_IMEM = 1,
- FW_STATUS_LOAD_EMEM = 2,
- FW_STATUS_LOAD_DMEM = 3,
- FW_STATUS_READY = 4,
-}FIRMWARE_8192S_STATUS;
-
-#define RTL8190_MAX_FIRMWARE_CODE_SIZE 64000 //64k
-
-typedef struct _rt_firmware{
- firmware_source_e eFWSource;
- PRT_8192S_FIRMWARE_HDR pFwHeader;
- FIRMWARE_8192S_STATUS FWStatus;
- u8 FwIMEM[64000];
- u8 FwEMEM[64000];
- u32 FwIMEMLen;
- u32 FwEMEMLen;
- u8 szFwTmpBuffer[164000];
- u16 CmdPacketFragThresold;
- //firmware_status_e firmware_status;//in 92u temp FIXLZM
- //u16 cmdpacket_frag_thresold;//in 92u temp FIXLZM
- //u8 firmware_buf[RTL8190_MAX_FIRMWARE_CODE_SIZE];//in 92u temp FIXLZM
- //u16 firmware_buf_size;//in 92u temp FIXLZM
-
-}rt_firmware, *prt_firmware;
-#else
-typedef struct _rt_firmware{
- firmware_status_e firmware_status;
- u16 cmdpacket_frag_thresold;
-#define RTL8190_MAX_FIRMWARE_CODE_SIZE 64000 //64k
-#define MAX_FW_INIT_STEP 3
- u8 firmware_buf[MAX_FW_INIT_STEP][RTL8190_MAX_FIRMWARE_CODE_SIZE];
- u16 firmware_buf_size[MAX_FW_INIT_STEP];
-}rt_firmware, *prt_firmware;
-#endif
-typedef struct _rt_firmware_info_819xUsb{
- u8 sz_info[16];
-}rt_firmware_info_819xUsb, *prt_firmware_info_819xUsb;
-#endif
-
//+by amy 080507
#define MAX_RECEIVE_BUFFER_SIZE 9100 // Add this to 9100 bytes to receive A-MSDU from RT-AP
#define NUM_OF_FIRMWARE_QUEUE 10
#define NUM_OF_PAGES_IN_FW 0x100
-#ifdef USE_ONE_PIPE
-#define NUM_OF_PAGE_IN_FW_QUEUE_BE 0x000
-#define NUM_OF_PAGE_IN_FW_QUEUE_BK 0x000
-#define NUM_OF_PAGE_IN_FW_QUEUE_VI 0x0ff
-#define NUM_OF_PAGE_IN_FW_QUEUE_VO 0x000
-#define NUM_OF_PAGE_IN_FW_QUEUE_HCCA 0
-#define NUM_OF_PAGE_IN_FW_QUEUE_CMD 0x0
-#define NUM_OF_PAGE_IN_FW_QUEUE_MGNT 0x00
-#define NUM_OF_PAGE_IN_FW_QUEUE_HIGH 0
-#define NUM_OF_PAGE_IN_FW_QUEUE_BCN 0x0
-#define NUM_OF_PAGE_IN_FW_QUEUE_PUB 0x00
-#else
#define NUM_OF_PAGE_IN_FW_QUEUE_BE 0x020
#define NUM_OF_PAGE_IN_FW_QUEUE_BK 0x020
#define NUM_OF_PAGE_IN_FW_QUEUE_BCN 0x4
#define NUM_OF_PAGE_IN_FW_QUEUE_PUB 0x18
-#endif
#define APPLIED_RESERVED_QUEUE_IN_FW 0x80000000
#define RSVD_FW_QUEUE_PAGE_BK_SHIFT 0x00
unsigned char buf[0xff];
}rtl_reg_debug;
-
-
-
-
-#if 0
-
-typedef struct tx_pendingbuf
-{
- struct ieee80211_txb *txb;
- short ispending;
- short descfrag;
-} tx_pendigbuf;
-
-#endif
-
typedef struct _rt_9x_tx_rate_history {
u32 cck[4];
u32 ofdm[8];
// spinlock_t irq_th_lock;
spinlock_t tx_lock;
spinlock_t ps_lock;
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16))
- struct semaphore mutex;
-#else
struct mutex mutex;
-#endif
spinlock_t rf_lock; //used to lock rf write operation added by wb
u16 irq_mask;
/* modified by davad for Rx process */
struct sk_buff_head rx_queue;
struct sk_buff_head skb_queue;
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
- struct tq_struct qos_activate;
-#else
+
struct work_struct qos_activate;
-#endif
+
short tx_urb_index;
atomic_t tx_pending[0x10];//UART_PRIORITY+1
u16 rts;
struct ChnlAccessSetting ChannelAccessSetting;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+
struct work_struct reset_wq;
-#else
- struct tq_struct reset_wq;
-#endif
/**********************************************************/
//for rtl819xUsb
u8 Rf_Mode; //add for Firmware RF -R/W switch
prt_firmware pFirmware;
rtl819xUsb_loopback_e LoopbackMode;
- firmware_source_e firmware_source;
bool usb_error;
u16 EEPROMTxPowerDiff;
bool bDmDisableProtect;
bool bIgnoreDiffRateTxPowerOffset;
-#ifdef EEPROM_OLD_FORMAT_SUPPORT
- u8 EEPROMTxPowerLevelCCK24G[14]; // CCK 2.4G channel 1~14
- //u8 EEPROMTxPowerLevelOFDM24G[14]; // OFDM 2.4G channel 1~14
- //u8 EEPROMTxPowerLevelOFDM5G[24]; // OFDM 5G
-#else
// For EEPROM TX Power Index like 8190 series
u8 EEPROMRfACCKChnl1TxPwLevel[3]; //RF-A CCK Tx Power Level at channel 7
u8 EEPROMRfAOfdmChnlTxPwLevel[3];//RF-A CCK Tx Power Level at [0],[1],[2] = channel 1,7,13
u8 RfCckChnlAreaTxPwr[2][3];
u8 RfOfdmChnlAreaTxPwr1T[2][3];
u8 RfOfdmChnlAreaTxPwr2T[2][3];
-#endif
// Add For EEPROM Efuse switch and Efuse Shadow map Setting
bool EepromOrEfuse;
/*PHY related*/
BB_REGISTER_DEFINITION_T PHYRegDef[4]; //Radio A/B/C/D
// Read/write are allow for following hardware information variables
-#ifdef RTL8192SU
u32 MCSTxPowerLevelOriginalOffset[7];//FIXLZM
-#else
- u32 MCSTxPowerLevelOriginalOffset[6];
-#endif
u32 CCKTxPowerLevelOriginalOffset;
u8 TxPowerLevelCCK[14]; // CCK channel 1~14
u8 TxPowerLevelOFDM24G[14]; // OFDM 2.4G channel 1~14
u16 SifsTime;
//define work item by amy 080526
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
struct delayed_work update_beacon_wq;
struct delayed_work watch_dog_wq;
struct delayed_work txpower_tracking_wq;
struct delayed_work rfpath_check_wq;
struct delayed_work gpio_change_rf_wq;
struct delayed_work initialgain_operate_wq;
-#else
- struct work_struct update_beacon_wq;
- struct work_struct watch_dog_wq;
- struct work_struct txpower_tracking_wq;
- struct work_struct rfpath_check_wq;
- struct work_struct gpio_change_rf_wq;
- struct work_struct initialgain_operate_wq;
-#endif
+
struct workqueue_struct *priv_wq;
-#else
- /* used for periodly scan */
- struct tq_struct update_beacon_wq;
- struct tq_struct txpower_tracking_wq;
- struct tq_struct rfpath_check_wq;
- struct tq_struct watch_dog_wq;
- struct tq_struct gpio_change_rf_wq;
- struct tq_struct initialgain_operate_wq;
-#endif
//#ifdef RTL8192SU
//lzm add for 8192S
u32 IntrMask;
//#endif
-#ifdef USB_RX_AGGREGATION_SUPPORT
- bool bCurrentRxAggrEnable;
- bool bForcedUsbRxAggr;
- u32 ForcedUsbRxAggrInfo;
- u32 LastUsbRxAggrInfoSetting;
- u32 RegUsbRxAggrInfo;
-#endif
UART_PRIORITY //0x0F
} priority_t;
-#if 0
-typedef enum{
- NIC_8192U = 1,
- NIC_8190P = 2,
- NIC_8192E = 3,
- NIC_8192SE = 4,
- NIC_8192SU = 5,
- } nic_t;
-#endif
-
-#if 0 //defined in Qos.h
-//typedef u32 AC_CODING;
-#define AC0_BE 0 // ACI: 0x00 // Best Effort
-#define AC1_BK 1 // ACI: 0x01 // Background
-#define AC2_VI 2 // ACI: 0x10 // Video
-#define AC3_VO 3 // ACI: 0x11 // Voice
-#define AC_MAX 4 // Max: define total number; Should not to be used as a real enum.
-
-//
-// ECWmin/ECWmax field.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.13.
-//
-typedef union _ECW{
- u8 charData;
- struct
- {
- u8 ECWmin:4;
- u8 ECWmax:4;
- }f; // Field
-}ECW, *PECW;
-
-//
-// ACI/AIFSN Field.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
-//
-typedef union _ACI_AIFSN{
- u8 charData;
-
- struct
- {
- u8 AIFSN:4;
- u8 ACM:1;
- u8 ACI:2;
- u8 Reserved:1;
- }f; // Field
-}ACI_AIFSN, *PACI_AIFSN;
-
-//
-// AC Parameters Record Format.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
-//
-typedef union _AC_PARAM{
- u32 longData;
- u8 charData[4];
-
- struct
- {
- ACI_AIFSN AciAifsn;
- ECW Ecw;
- u16 TXOPLimit;
- }f; // Field
-}AC_PARAM, *PAC_PARAM;
-
-#endif
#ifdef JOHN_HWSEC
struct ssid_thread {
struct net_device *dev;
};
#endif
-#ifdef RTL8192SU
short rtl8192SU_tx_cmd(struct net_device *dev, struct sk_buff *skb);
short rtl8192SU_tx(struct net_device *dev, struct sk_buff* skb);
bool FirmwareDownload92S(struct net_device *dev);
-#else
-short rtl8192_tx(struct net_device *dev, struct sk_buff* skb);
-bool init_firmware(struct net_device *dev);
-#endif
short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb);
short rtl8192_tx(struct net_device *dev, struct sk_buff* skb);
projects / karo-tx-linux.git / blobdiff