*/
#ifndef CONFIG_FORCE_HARD_FLOAT
-double __floatsidf(int i) { return i; }
-unsigned int __fixunsdfsi(double d) { return d; }
-double __adddf3(double a, double b) { return a+b; }
-double __addsf3(float a, float b) { return a+b; }
-double __subdf3(double a, double b) { return a-b; }
-double __extendsfdf2(float a) {return a; }
+double __floatsidf(int i)
+{
+ return i;
+}
+
+unsigned int __fixunsdfsi(double d)
+{
+ return d;
+}
+
+double __adddf3(double a, double b)
+{
+ return a+b;
+}
+
+double __addsf3(float a, float b)
+{
+ return a+b;
+}
+
+double __subdf3(double a, double b)
+{
+ return a-b;
+}
+
+double __extendsfdf2(float a)
+{
+ return a;
+}
#endif
#undef LOOP_TEST
#include "r819xU_phyreg.h"
#include "r819xU_cmdpkt.h"
#include "r8192U_dm.h"
-//#include "r8192xU_phyreg.h"
#include <linux/usb.h>
#include <linux/slab.h>
#include <linux/proc_fs.h>
#include "dot11d.h"
//set here to open your trace code. //WB
-u32 rt_global_debug_component = \
- // COMP_INIT |
-// COMP_DBG |
- // COMP_EPROM |
-// COMP_PHY |
- // COMP_RF |
-// COMP_FIRMWARE |
-// COMP_CH |
- // COMP_POWER_TRACKING |
-// COMP_RATE |
- // COMP_TXAGC |
- // COMP_TRACE |
- COMP_DOWN |
- // COMP_RECV |
- // COMP_SWBW |
+u32 rt_global_debug_component = COMP_DOWN |
COMP_SEC |
- // COMP_RESET |
- // COMP_SEND |
- // COMP_EVENTS |
COMP_ERR; //always open err flags on
#define TOTAL_CAM_ENTRY 32
module_param(ifname, charp, S_IRUGO|S_IWUSR);
-//module_param(hwseqnum,int, S_IRUGO|S_IWUSR);
module_param(hwwep, int, S_IRUGO|S_IWUSR);
module_param(channels, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ifname, " Net interface name, wlan%d=default");
-//MODULE_PARM_DESC(hwseqnum," Try to use hardware 802.11 header sequence numbers. Zero=default");
MODULE_PARM_DESC(hwwep, " Try to use hardware security support. ");
MODULE_PARM_DESC(channels, " Channel bitmask for specific locales. NYI");
static int rtl8192_usb_probe(struct usb_interface *intf,
- const struct usb_device_id *id);
+ const struct usb_device_id *id);
static void rtl8192_usb_disconnect(struct usb_interface *intf);
{
int i, max_chan = -1, min_chan = -1;
struct ieee80211_device *ieee = priv->ieee80211;
- switch (channel_plan)
- {
+ switch (channel_plan) {
case COUNTRY_CODE_FCC:
case COUNTRY_CODE_IC:
case COUNTRY_CODE_ETSI:
case COUNTRY_CODE_MKK1:
case COUNTRY_CODE_ISRAEL:
case COUNTRY_CODE_TELEC:
- case COUNTRY_CODE_MIC:
+ case COUNTRY_CODE_MIC:
Dot11d_Init(ieee);
ieee->bGlobalDomain = false;
//actually 8225 & 8256 rf chips only support B,G,24N mode
if ((priv->rf_chip == RF_8225) || (priv->rf_chip == RF_8256)) {
min_chan = 1;
max_chan = 14;
- }
- else {
+ } else {
RT_TRACE(COMP_ERR, "unknown rf chip, can't set channel map in function:%s()\n", __func__);
}
if (ChannelPlan[channel_plan].Len != 0) {
Dot11d_Reset(ieee);
ieee->bGlobalDomain = true;
break;
-
+
default:
break;
}
}
-#define rx_hal_is_cck_rate(_pdrvinfo)\
- (_pdrvinfo->RxRate == DESC90_RATE1M ||\
- _pdrvinfo->RxRate == DESC90_RATE2M ||\
- _pdrvinfo->RxRate == DESC90_RATE5_5M ||\
- _pdrvinfo->RxRate == DESC90_RATE11M) &&\
- !_pdrvinfo->RxHT\
void CamResetAllEntry(struct net_device *dev)
//2004/02/11 In static WEP, OID_ADD_KEY or OID_ADD_WEP are set before STA associate to AP.
// However, ResetKey is called on OID_802_11_INFRASTRUCTURE_MODE and MlmeAssociateRequest
// In this condition, Cam can not be reset because upper layer will not set this static key again.
- //if(Adapter->EncAlgorithm == WEP_Encryption)
- // return;
-//debug
- //DbgPrint("========================================\n");
- //DbgPrint(" Call ResetAllEntry \n");
- //DbgPrint("========================================\n\n");
ulcommand |= BIT31|BIT30;
write_nic_dword(dev, RWCAM, ulcommand);
u32 read_cam(struct net_device *dev, u8 addr)
{
+ u32 data;
+
write_nic_dword(dev, RWCAM, 0x80000000|(addr&0xff));
- return read_nic_dword(dev, 0xa8);
+ read_nic_dword(dev, 0xa8, &data);
+ return data;
}
void write_nic_byte_E(struct net_device *dev, int indx, u8 data)
struct usb_device *udev = priv->udev;
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
- indx|0xfe00, 0, &data, 1, HZ / 2);
+ RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
+ indx|0xfe00, 0, &data, 1, HZ / 2);
if (status < 0)
- {
- printk("write_nic_byte_E TimeOut! status:%d\n", status);
- }
+ netdev_err(dev, "write_nic_byte_E TimeOut! status: %d\n", status);
}
-u8 read_nic_byte_E(struct net_device *dev, int indx)
+int read_nic_byte_E(struct net_device *dev, int indx, u8 *data)
{
int status;
- u8 data;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
struct usb_device *udev = priv->udev;
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
- RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
- indx|0xfe00, 0, &data, 1, HZ / 2);
+ RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
+ indx|0xfe00, 0, data, 1, HZ / 2);
- if (status < 0)
- {
- printk("read_nic_byte_E TimeOut! status:%d\n", status);
+ if (status < 0) {
+ netdev_err(dev, "%s failure status: %d\n", __func__, status);
+ return status;
}
- return data;
+ return 0;
}
//as 92U has extend page from 4 to 16, so modify functions below.
void write_nic_byte(struct net_device *dev, int indx, u8 data)
struct usb_device *udev = priv->udev;
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
- (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 1, HZ / 2);
+ RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
+ (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 1, HZ / 2);
if (status < 0)
- {
- printk("write_nic_byte TimeOut! status:%d\n", status);
- }
+ netdev_err(dev, "write_nic_byte TimeOut! status: %d\n", status);
}
struct usb_device *udev = priv->udev;
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
- (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 2, HZ / 2);
+ RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
+ (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 2, HZ / 2);
if (status < 0)
- {
- printk("write_nic_word TimeOut! status:%d\n", status);
- }
+ netdev_err(dev, "write_nic_word TimeOut! status: %d\n", status);
}
struct usb_device *udev = priv->udev;
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
- (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 4, HZ / 2);
+ RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
+ (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 4, HZ / 2);
if (status < 0)
- {
- printk("write_nic_dword TimeOut! status:%d\n", status);
- }
+ netdev_err(dev, "write_nic_dword TimeOut! status: %d\n", status);
}
-u8 read_nic_byte(struct net_device *dev, int indx)
+int read_nic_byte(struct net_device *dev, int indx, u8 *data)
{
- u8 data;
int status;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
struct usb_device *udev = priv->udev;
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
- RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
- (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 1, HZ / 2);
+ RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
+ (indx&0xff)|0xff00, (indx>>8)&0x0f, data, 1, HZ / 2);
- if (status < 0)
- {
- printk("read_nic_byte TimeOut! status:%d\n", status);
+ if (status < 0) {
+ netdev_err(dev, "%s failure status: %d\n", __func__, status);
+ return status;
}
- return data;
+ return 0;
}
-u16 read_nic_word(struct net_device *dev, int indx)
+int read_nic_word(struct net_device *dev, int indx, u16 *data)
{
- u16 data;
int status;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
struct usb_device *udev = priv->udev;
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
- RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
- (indx&0xff)|0xff00, (indx>>8)&0x0f,
- &data, 2, HZ / 2);
+ RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
+ (indx&0xff)|0xff00, (indx>>8)&0x0f,
+ data, 2, HZ / 2);
- if (status < 0)
- printk("read_nic_word TimeOut! status:%d\n", status);
+ if (status < 0) {
+ netdev_err(dev, "%s failure status: %d\n", __func__, status);
+ return status;
+ }
- return data;
+ return 0;
}
-u16 read_nic_word_E(struct net_device *dev, int indx)
+int read_nic_word_E(struct net_device *dev, int indx, u16 *data)
{
- u16 data;
int status;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
struct usb_device *udev = priv->udev;
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
- RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
- indx|0xfe00, 0, &data, 2, HZ / 2);
+ RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
+ indx|0xfe00, 0, data, 2, HZ / 2);
- if (status < 0)
- printk("read_nic_word TimeOut! status:%d\n", status);
+ if (status < 0) {
+ netdev_err(dev, "%s failure status: %d\n", __func__, status);
+ return status;
+ }
- return data;
+ return 0;
}
-u32 read_nic_dword(struct net_device *dev, int indx)
+int read_nic_dword(struct net_device *dev, int indx, u32 *data)
{
- u32 data;
int status;
- /* int result; */
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
struct usb_device *udev = priv->udev;
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
- RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
- (indx&0xff)|0xff00, (indx>>8)&0x0f,
- &data, 4, HZ / 2);
- /* if(0 != result) {
- * printk(KERN_WARNING "read size of data = %d\, date = %d\n",
- * result, data);
- * }
- */
+ RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
+ (indx&0xff)|0xff00, (indx>>8)&0x0f,
+ data, 4, HZ / 2);
- if (status < 0)
- printk("read_nic_dword TimeOut! status:%d\n", status);
+ if (status < 0) {
+ netdev_err(dev, "%s failure status: %d\n", __func__, status);
+ return status;
+ }
- return data;
+ return 0;
}
/* u8 read_phy_cck(struct net_device *dev, u8 adr); */
static struct net_device_stats *rtl8192_stats(struct net_device *dev);
void rtl8192_commit(struct net_device *dev);
-/* void rtl8192_restart(struct net_device *dev); */
void rtl8192_restart(struct work_struct *work);
-/* void rtl8192_rq_tx_ack(struct work_struct *work); */
void watch_dog_timer_callback(unsigned long data);
/****************************************************************************
{
struct net_device *dev = m->private;
int i, n, max = 0xff;
+ u8 byte_rd;
seq_puts(m, "\n####################page 0##################\n ");
for (n = 0; n <= max;) {
- //printk( "\nD: %2x> ", n);
seq_printf(m, "\nD: %2x > ", n);
- for (i = 0; i < 16 && n <= max; i++, n++)
- seq_printf(m, "%2x ", read_nic_byte(dev, 0x000|n));
-
- // printk("%2x ",read_nic_byte(dev,n));
+ for (i = 0; i < 16 && n <= max; i++, n++) {
+ read_nic_byte(dev, 0x000|n, &byte_rd);
+ seq_printf(m, "%2x ", byte_rd);
+ }
}
seq_puts(m, "\n####################page 1##################\n ");
for (n = 0; n <= max;) {
- //printk( "\nD: %2x> ", n);
seq_printf(m, "\nD: %2x > ", n);
- for (i = 0; i < 16 && n <= max; i++, n++)
- seq_printf(m, "%2x ", read_nic_byte(dev, 0x100|n));
-
- // printk("%2x ",read_nic_byte(dev,n));
+ for (i = 0; i < 16 && n <= max; i++, n++) {
+ read_nic_byte(dev, 0x100|n, &byte_rd);
+ seq_printf(m, "%2x ", byte_rd);
+ }
}
seq_puts(m, "\n####################page 3##################\n ");
for (n = 0; n <= max;) {
- //printk( "\nD: %2x> ", n);
seq_printf(m, "\nD: %2x > ", n);
- for (i = 0; i < 16 && n <= max; i++, n++)
- seq_printf(m, "%2x ", read_nic_byte(dev, 0x300|n));
-
- // printk("%2x ",read_nic_byte(dev,n));
+ for (i = 0; i < 16 && n <= max; i++, n++) {
+ read_nic_byte(dev, 0x300|n, &byte_rd);
+ seq_printf(m, "%2x ", byte_rd);
+ }
}
seq_putc(m, '\n');
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
seq_printf(m,
- "TX VI priority ok int: %lu\n"
- "TX VI priority error int: %lu\n"
- "TX VO priority ok int: %lu\n"
- "TX VO priority error int: %lu\n"
- "TX BE priority ok int: %lu\n"
- "TX BE priority error int: %lu\n"
- "TX BK priority ok int: %lu\n"
- "TX BK priority error int: %lu\n"
- "TX MANAGE priority ok int: %lu\n"
- "TX MANAGE priority error int: %lu\n"
- "TX BEACON priority ok int: %lu\n"
- "TX BEACON priority error int: %lu\n"
-// "TX high priority ok int: %lu\n"
-// "TX high priority failed error int: %lu\n"
- "TX queue resume: %lu\n"
- "TX queue stopped?: %d\n"
- "TX fifo overflow: %lu\n"
-// "TX beacon: %lu\n"
- "TX VI queue: %d\n"
- "TX VO queue: %d\n"
- "TX BE queue: %d\n"
- "TX BK queue: %d\n"
-// "TX HW queue: %d\n"
- "TX VI dropped: %lu\n"
- "TX VO dropped: %lu\n"
- "TX BE dropped: %lu\n"
- "TX BK dropped: %lu\n"
- "TX total data packets %lu\n",
-// "TX beacon aborted: %lu\n",
- priv->stats.txviokint,
- priv->stats.txvierr,
- priv->stats.txvookint,
- priv->stats.txvoerr,
- priv->stats.txbeokint,
- priv->stats.txbeerr,
- priv->stats.txbkokint,
- priv->stats.txbkerr,
- priv->stats.txmanageokint,
- priv->stats.txmanageerr,
- priv->stats.txbeaconokint,
- priv->stats.txbeaconerr,
-// priv->stats.txhpokint,
-// priv->stats.txhperr,
- priv->stats.txresumed,
- netif_queue_stopped(dev),
- priv->stats.txoverflow,
-// priv->stats.txbeacon,
- atomic_read(&(priv->tx_pending[VI_PRIORITY])),
- atomic_read(&(priv->tx_pending[VO_PRIORITY])),
- atomic_read(&(priv->tx_pending[BE_PRIORITY])),
- atomic_read(&(priv->tx_pending[BK_PRIORITY])),
-// read_nic_byte(dev, TXFIFOCOUNT),
- priv->stats.txvidrop,
- priv->stats.txvodrop,
- priv->stats.txbedrop,
- priv->stats.txbkdrop,
- priv->stats.txdatapkt
-// priv->stats.txbeaconerr
+ "TX VI priority ok int: %lu\n"
+ "TX VI priority error int: %lu\n"
+ "TX VO priority ok int: %lu\n"
+ "TX VO priority error int: %lu\n"
+ "TX BE priority ok int: %lu\n"
+ "TX BE priority error int: %lu\n"
+ "TX BK priority ok int: %lu\n"
+ "TX BK priority error int: %lu\n"
+ "TX MANAGE priority ok int: %lu\n"
+ "TX MANAGE priority error int: %lu\n"
+ "TX BEACON priority ok int: %lu\n"
+ "TX BEACON priority error int: %lu\n"
+ "TX queue resume: %lu\n"
+ "TX queue stopped?: %d\n"
+ "TX fifo overflow: %lu\n"
+ "TX VI queue: %d\n"
+ "TX VO queue: %d\n"
+ "TX BE queue: %d\n"
+ "TX BK queue: %d\n"
+ "TX VI dropped: %lu\n"
+ "TX VO dropped: %lu\n"
+ "TX BE dropped: %lu\n"
+ "TX BK dropped: %lu\n"
+ "TX total data packets %lu\n",
+ priv->stats.txviokint,
+ priv->stats.txvierr,
+ priv->stats.txvookint,
+ priv->stats.txvoerr,
+ priv->stats.txbeokint,
+ priv->stats.txbeerr,
+ priv->stats.txbkokint,
+ priv->stats.txbkerr,
+ priv->stats.txmanageokint,
+ priv->stats.txmanageerr,
+ priv->stats.txbeaconokint,
+ priv->stats.txbeaconerr,
+ priv->stats.txresumed,
+ netif_queue_stopped(dev),
+ priv->stats.txoverflow,
+ atomic_read(&(priv->tx_pending[VI_PRIORITY])),
+ atomic_read(&(priv->tx_pending[VO_PRIORITY])),
+ atomic_read(&(priv->tx_pending[BE_PRIORITY])),
+ atomic_read(&(priv->tx_pending[BK_PRIORITY])),
+ priv->stats.txvidrop,
+ priv->stats.txvodrop,
+ priv->stats.txbedrop,
+ priv->stats.txbkdrop,
+ priv->stats.txdatapkt
);
return 0;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
seq_printf(m,
- "RX packets: %lu\n"
- "RX urb status error: %lu\n"
- "RX invalid urb error: %lu\n",
- priv->stats.rxoktotal,
- priv->stats.rxstaterr,
- priv->stats.rxurberr);
+ "RX packets: %lu\n"
+ "RX urb status error: %lu\n"
+ "RX invalid urb error: %lu\n",
+ priv->stats.rxoktotal,
+ priv->stats.rxstaterr,
+ priv->stats.rxurberr);
return 0;
}
-----------------------------MISC STUFF-------------------------
*****************************************************************************/
-/* this is only for debugging */
-void print_buffer(u32 *buffer, int len)
-{
- int i;
- u8 *buf = (u8 *)buffer;
-
- printk("ASCII BUFFER DUMP (len: %x):\n", len);
-
- for (i = 0; i < len; i++)
- printk("%c", buf[i]);
-
- printk("\nBINARY BUFFER DUMP (len: %x):\n", len);
-
- for (i = 0; i < len; i++)
- printk("%x", buf[i]);
-
- printk("\n");
-}
-
-//short check_nic_enough_desc(struct net_device *dev, priority_t priority)
short check_nic_enough_desc(struct net_device *dev, int queue_index)
{
struct r8192_priv *priv = ieee80211_priv(dev);
void tx_timeout(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- //rtl8192_commit(dev);
schedule_work(&priv->reset_wq);
- //DMESG("TXTIMEOUT");
}
RT_TRACE(COMP_EPROM, "EEPROM addr %x : %x", i, eprom_read(dev, i));
}
-/* this is only for debug */
-void rtl8192_dump_reg(struct net_device *dev)
-{
- int i;
- int n;
- int max = 0x1ff;
-
- RT_TRACE(COMP_PHY, "Dumping NIC register map");
-
- for (n = 0; n <= max;)
- {
- printk("\nD: %2x> ", n);
- for (i = 0; i < 16 && n <= max; i++, n++)
- printk("%2x ", read_nic_byte(dev, n));
- }
- printk("\n");
-}
/****************************************************************************
------------------------------HW STUFF---------------------------
void rtl8192_set_mode(struct net_device *dev, int mode)
{
u8 ecmd;
- ecmd = read_nic_byte(dev, EPROM_CMD);
+ read_nic_byte(dev, EPROM_CMD, &ecmd);
ecmd = ecmd & ~EPROM_CMD_OPERATING_MODE_MASK;
ecmd = ecmd | (mode<<EPROM_CMD_OPERATING_MODE_SHIFT);
- ecmd = ecmd & ~(1<<EPROM_CS_SHIFT);
- ecmd = ecmd & ~(1<<EPROM_CK_SHIFT);
+ ecmd = ecmd & ~EPROM_CS_BIT;
+ ecmd = ecmd & ~EPROM_CK_BIT;
write_nic_byte(dev, EPROM_CMD, ecmd);
}
struct r8192_priv *priv = ieee80211_priv(dev);
u8 msr;
- msr = read_nic_byte(dev, MSR);
+ read_nic_byte(dev, MSR, &msr);
msr &= ~MSR_LINK_MASK;
/* do not change in link_state != WLAN_LINK_ASSOCIATED.
* this is intentional and make sense for ad-hoc and
* master (see the create BSS/IBSS func)
*/
- if (priv->ieee80211->state == IEEE80211_LINKED){
+ if (priv->ieee80211->state == IEEE80211_LINKED) {
if (priv->ieee80211->iw_mode == IW_MODE_INFRA)
msr |= (MSR_LINK_MANAGED<<MSR_LINK_SHIFT);
else if (priv->ieee80211->iw_mode == IW_MODE_MASTER)
msr |= (MSR_LINK_MASTER<<MSR_LINK_SHIFT);
- } else
+ } else {
msr |= (MSR_LINK_NONE<<MSR_LINK_SHIFT);
+ }
write_nic_byte(dev, MSR, msr);
}
void rtl8192_set_chan(struct net_device *dev, short ch)
{
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-// u32 tx;
RT_TRACE(COMP_CH, "=====>%s()====ch:%d\n", __func__, ch);
priv->chan = ch;
/* this hack should avoid frame TX during channel setting*/
-
-// tx = read_nic_dword(dev,TX_CONF);
-// tx &= ~TX_LOOPBACK_MASK;
-
#ifndef LOOP_TEST
-// write_nic_dword(dev,TX_CONF, tx |( TX_LOOPBACK_MAC<<TX_LOOPBACK_SHIFT));
-
//need to implement rf set channel here WB
if (priv->rf_set_chan)
- priv->rf_set_chan(dev, priv->chan);
+ priv->rf_set_chan(dev, priv->chan);
mdelay(10);
-// write_nic_dword(dev,TX_CONF,tx | (TX_LOOPBACK_NONE<<TX_LOOPBACK_SHIFT));
#endif
}
static void rtl8192_rx_isr(struct urb *urb);
-//static void rtl8192_rx_isr(struct urb *rx_urb);
u32 get_rxpacket_shiftbytes_819xusb(struct ieee80211_rx_stats *pstats)
{
else
#endif
return (sizeof(rx_desc_819x_usb) + pstats->RxDrvInfoSize
- + pstats->RxBufShift);
+ + pstats->RxBufShift);
}
static int rtl8192_rx_initiate(struct net_device *dev)
kfree_skb(skb);
break;
}
-// printk("nomal packet IN request!\n");
usb_fill_bulk_urb(entry, priv->udev,
usb_rcvbulkpipe(priv->udev, 3), skb_tail_pointer(skb),
RX_URB_SIZE, rtl8192_rx_isr, skb);
/* command packet rx procedure */
while (skb_queue_len(&priv->rx_queue) < MAX_RX_URB + 3) {
-// printk("command packet IN request!\n");
skb = __dev_alloc_skb(RX_URB_SIZE, GFP_KERNEL);
if (!skb)
break;
info = (struct rtl8192_rx_info *) skb->cb;
info->urb = entry;
info->dev = dev;
- info->out_pipe = 9; //denote rx cmd packet queue
+ info->out_pipe = 9; //denote rx cmd packet queue
skb_queue_tail(&priv->rx_queue, skb);
usb_submit_urb(entry, GFP_KERNEL);
}
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
u32 rxconf;
- rxconf = read_nic_dword(dev, RCR);
+ read_nic_dword(dev, RCR, &rxconf);
rxconf = rxconf & ~MAC_FILTER_MASK;
rxconf = rxconf | RCR_AMF;
rxconf = rxconf | RCR_ADF;
rxconf = rxconf | RCR_AB;
rxconf = rxconf | RCR_AM;
- //rxconf = rxconf | RCR_ACF;
- if (dev->flags & IFF_PROMISC) {DMESG("NIC in promisc mode"); }
+ if (dev->flags & IFF_PROMISC)
+ DMESG("NIC in promisc mode");
- if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || \
- dev->flags & IFF_PROMISC){
+ if (priv->ieee80211->iw_mode == IW_MODE_MONITOR ||
+ dev->flags & IFF_PROMISC) {
rxconf = rxconf | RCR_AAP;
- } /*else if(priv->ieee80211->iw_mode == IW_MODE_MASTER){
- rxconf = rxconf | (1<<ACCEPT_ALLMAC_FRAME_SHIFT);
- rxconf = rxconf | (1<<RX_CHECK_BSSID_SHIFT);
- }*/else{
+ } else {
rxconf = rxconf | RCR_APM;
rxconf = rxconf | RCR_CBSSID;
}
- if (priv->ieee80211->iw_mode == IW_MODE_MONITOR){
+ if (priv->ieee80211->iw_mode == IW_MODE_MONITOR) {
rxconf = rxconf | RCR_AICV;
rxconf = rxconf | RCR_APWRMGT;
}
rxconf = rxconf & ~MAX_RX_DMA_MASK;
rxconf = rxconf | ((u32)7<<RCR_MXDMA_OFFSET);
-// rxconf = rxconf | (1<<RX_AUTORESETPHY_SHIFT);
rxconf = rxconf | RCR_ONLYERLPKT;
-// rxconf = rxconf &~ RCR_CS_MASK;
-// rxconf = rxconf | (1<<RCR_CS_SHIFT);
-
write_nic_dword(dev, RCR, rxconf);
-
- #ifdef DEBUG_RX
- DMESG("rxconf: %x %x", rxconf, read_nic_dword(dev, RCR));
- #endif
}
//wait to be removed
void rtl8192_rx_enable(struct net_device *dev)
{
- //u8 cmd;
-
- //struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-
rtl8192_rx_initiate(dev);
-
-// rtl8192_set_rxconf(dev);
}
struct sk_buff *skb;
struct rtl8192_rx_info *info;
- cmd = read_nic_byte(dev, CMDR);
- write_nic_byte(dev, CMDR, cmd & \
- ~(CR_TE|CR_RE));
+ read_nic_byte(dev, CMDR, &cmd);
+ write_nic_byte(dev, CMDR, cmd & ~(CR_TE|CR_RE));
force_pci_posting(dev);
mdelay(10);
kfree_skb(skb);
}
- if (skb_queue_len(&priv->skb_queue)) {
- printk(KERN_WARNING "skb_queue not empty\n");
- }
+ if (skb_queue_len(&priv->skb_queue))
+ netdev_warn(dev, "skb_queue not empty\n");
skb_queue_purge(&priv->skb_queue);
return;
inline u16 ieeerate2rtlrate(int rate)
{
- switch (rate){
+ switch (rate) {
case 10:
- return 0;
+ return 0;
case 20:
- return 1;
+ return 1;
case 55:
- return 2;
+ return 2;
case 110:
- return 3;
+ return 3;
case 60:
- return 4;
+ return 4;
case 90:
- return 5;
+ return 5;
case 120:
- return 6;
+ return 6;
case 180:
- return 7;
+ return 7;
case 240:
- return 8;
+ return 8;
case 360:
- return 9;
+ return 9;
case 480:
- return 10;
+ return 10;
case 540:
- return 11;
+ return 11;
default:
- return 3;
+ return 3;
}
}
priv->stats.rxstaterr++;
priv->ieee80211->stats.rx_errors++;
usb_free_urb(urb);
- // printk("%s():rx status err\n",__FUNCTION__);
return;
}
skb_unlink(skb, &priv->rx_queue);
skb = dev_alloc_skb(RX_URB_SIZE);
if (unlikely(!skb)) {
usb_free_urb(urb);
- printk("%s():can,t alloc skb\n", __func__);
+ netdev_err(dev, "%s(): can't alloc skb\n", __func__);
/* TODO check rx queue length and refill *somewhere* */
return;
}
usb_fill_bulk_urb(urb, priv->udev,
- usb_rcvbulkpipe(priv->udev, out_pipe), skb_tail_pointer(skb),
- RX_URB_SIZE, rtl8192_rx_isr, skb);
+ usb_rcvbulkpipe(priv->udev, out_pipe), skb_tail_pointer(skb),
+ RX_URB_SIZE, rtl8192_rx_isr, skb);
info = (struct rtl8192_rx_info *) skb->cb;
info->urb = urb;
skb_queue_tail(&priv->rx_queue, skb);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err && err != EPERM)
- printk("can not submit rxurb, err is %x,URB status is %x\n", err, urb->status);
+ netdev_err(dev, "can not submit rxurb, err is %x, URB status is %x\n", err, urb->status);
}
-u32
-rtl819xusb_rx_command_packet(
- struct net_device *dev,
- struct ieee80211_rx_stats *pstats
- )
+u32 rtl819xusb_rx_command_packet(struct net_device *dev,
+ struct ieee80211_rx_stats *pstats)
{
u32 status;
- //RT_TRACE(COMP_RECV, DBG_TRACE, ("---> RxCommandPacketHandle819xUsb()\n"));
-
status = cmpk_message_handle_rx(dev, pstats);
if (status)
- {
DMESG("rxcommandpackethandle819xusb: It is a command packet\n");
- }
- else
- {
- //RT_TRACE(COMP_RECV, DBG_TRACE, ("RxCommandPacketHandle819xUsb: It is not a command packet\n"));
- }
- //RT_TRACE(COMP_RECV, DBG_TRACE, ("<--- RxCommandPacketHandle819xUsb()\n"));
return status;
}
u8 queue_index = tcb_desc->queue_index;
/* shall not be referred by command packet */
- assert(queue_index != TXCMD_QUEUE);
+ RTL8192U_ASSERT(queue_index != TXCMD_QUEUE);
spin_lock_irqsave(&priv->tx_lock, flags);
memcpy((unsigned char *)(skb->cb), &dev, sizeof(dev));
-// tcb_desc->RATRIndex = 7;
-// tcb_desc->bTxDisableRateFallBack = 1;
-// tcb_desc->bTxUseDriverAssingedRate = 1;
tcb_desc->bTxEnableFwCalcDur = 1;
skb_push(skb, priv->ieee80211->tx_headroom);
ret = rtl8192_tx(dev, skb);
- //priv->ieee80211->stats.tx_bytes+=(skb->len - priv->ieee80211->tx_headroom);
- //priv->ieee80211->stats.tx_packets++;
-
spin_unlock_irqrestore(&priv->tx_lock, flags);
-// return ret;
return;
}
u16 DrvAggr_PaddingAdd(struct net_device *dev, struct sk_buff *skb)
{
u16 PaddingNum = 256 - ((skb->len + TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES) % 256);
- return (PaddingNum&0xff);
+ return PaddingNum & 0xff;
}
u8 MRateToHwRate8190Pci(u8 rate);
memset(agg_skb->data, 0, agg_skb->len);
skb_reserve(agg_skb, ieee->tx_headroom);
-// RT_DEBUG_DATA(COMP_SEND, skb->cb, sizeof(skb->cb));
/* reserve info for first subframe Tx descriptor to be set in the tx function */
skb = pSendList->tx_agg_frames[0];
tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
tcb_desc->drv_agg_enable = 1;
tcb_desc->pkt_size = skb->len;
tcb_desc->DrvAggrNum = pSendList->nr_drv_agg_frames;
- printk("DrvAggNum = %d\n", tcb_desc->DrvAggrNum);
-// RT_DEBUG_DATA(COMP_SEND, skb->cb, sizeof(skb->cb));
-// printk("========>skb->data ======> \n");
-// RT_DEBUG_DATA(COMP_SEND, skb->data, skb->len);
+ netdev_dbg(dev, "DrvAggNum = %d\n", tcb_desc->DrvAggrNum);
memcpy(agg_skb->cb, skb->cb, sizeof(skb->cb));
memcpy(skb_put(agg_skb, skb->len), skb->data, skb->len);
memset(tx_fwinfo, 0, sizeof(tx_fwinfo_819x_usb));
/* DWORD 0 */
- tx_fwinfo->TxHT = (tcb_desc->data_rate&0x80)?1:0;
+ tx_fwinfo->TxHT = (tcb_desc->data_rate&0x80) ? 1 : 0;
tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate);
tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur;
tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc);
}
/* Protection mode related */
- tx_fwinfo->RtsEnable = (tcb_desc->bRTSEnable)?1:0;
- tx_fwinfo->CtsEnable = (tcb_desc->bCTSEnable)?1:0;
- tx_fwinfo->RtsSTBC = (tcb_desc->bRTSSTBC)?1:0;
- tx_fwinfo->RtsHT = (tcb_desc->rts_rate&0x80)?1:0;
+ tx_fwinfo->RtsEnable = (tcb_desc->bRTSEnable) ? 1 : 0;
+ tx_fwinfo->CtsEnable = (tcb_desc->bCTSEnable) ? 1 : 0;
+ tx_fwinfo->RtsSTBC = (tcb_desc->bRTSSTBC) ? 1 : 0;
+ tx_fwinfo->RtsHT = (tcb_desc->rts_rate&0x80) ? 1 : 0;
tx_fwinfo->RtsRate = MRateToHwRate8190Pci((u8)tcb_desc->rts_rate);
- tx_fwinfo->RtsSubcarrier = (tx_fwinfo->RtsHT == 0)?(tcb_desc->RTSSC):0;
- tx_fwinfo->RtsBandwidth = (tx_fwinfo->RtsHT == 1)?((tcb_desc->bRTSBW)?1:0):0;
- tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT == 0)?(tcb_desc->bRTSUseShortPreamble?1:0):\
- (tcb_desc->bRTSUseShortGI?1:0);
+ tx_fwinfo->RtsSubcarrier = (tx_fwinfo->RtsHT == 0) ? (tcb_desc->RTSSC) : 0;
+ tx_fwinfo->RtsBandwidth = (tx_fwinfo->RtsHT == 1) ? ((tcb_desc->bRTSBW) ? 1 : 0) : 0;
+ tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT == 0) ? (tcb_desc->bRTSUseShortPreamble ? 1 : 0) :
+ (tcb_desc->bRTSUseShortGI ? 1 : 0);
/* Set Bandwidth and sub-channel settings. */
- if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
- {
+ if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40) {
if (tcb_desc->bPacketBW) {
tx_fwinfo->TxBandwidth = 1;
tx_fwinfo->TxSubCarrier = 0; //By SD3's Jerry suggestion, use duplicated mode
/* Fill Tx descriptor */
memset(tx_agg_desc, 0, sizeof(tx_desc_819x_usb_aggr_subframe));
/* DWORD 0 */
- //tx_agg_desc->LINIP = 0;
- //tx_agg_desc->CmdInit = 1;
tx_agg_desc->Offset = sizeof(tx_fwinfo_819x_usb) + 8;
/* already raw data, need not to subtract header length */
tx_agg_desc->PktSize = skb->len & 0xffff;
/*DWORD 1*/
tx_agg_desc->SecCAMID = 0;
tx_agg_desc->RATid = tcb_desc->RATRIndex;
- {
- //MPDUOverhead = 0;
- tx_agg_desc->NoEnc = 1;
- }
+ tx_agg_desc->NoEnc = 1;
tx_agg_desc->SecType = 0x0;
if (tcb_desc->bHwSec) {
- switch (priv->ieee80211->pairwise_key_type)
- {
- case KEY_TYPE_WEP40:
- case KEY_TYPE_WEP104:
- tx_agg_desc->SecType = 0x1;
- tx_agg_desc->NoEnc = 0;
- break;
- case KEY_TYPE_TKIP:
- tx_agg_desc->SecType = 0x2;
- tx_agg_desc->NoEnc = 0;
- break;
- case KEY_TYPE_CCMP:
- tx_agg_desc->SecType = 0x3;
- tx_agg_desc->NoEnc = 0;
- break;
- case KEY_TYPE_NA:
- tx_agg_desc->SecType = 0x0;
- tx_agg_desc->NoEnc = 1;
- break;
+ switch (priv->ieee80211->pairwise_key_type) {
+ case KEY_TYPE_WEP40:
+ case KEY_TYPE_WEP104:
+ tx_agg_desc->SecType = 0x1;
+ tx_agg_desc->NoEnc = 0;
+ break;
+ case KEY_TYPE_TKIP:
+ tx_agg_desc->SecType = 0x2;
+ tx_agg_desc->NoEnc = 0;
+ break;
+ case KEY_TYPE_CCMP:
+ tx_agg_desc->SecType = 0x3;
+ tx_agg_desc->NoEnc = 0;
+ break;
+ case KEY_TYPE_NA:
+ tx_agg_desc->SecType = 0x0;
+ tx_agg_desc->NoEnc = 1;
+ break;
}
}
//DWORD 2
/* According windows driver, it seems that there no need to fill this field */
- //tx_agg_desc->TxBufferSize= (u32)(skb->len - USB_HWDESC_HEADER_LEN);
/* to fill next packet */
skb_put(agg_skb, TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES);
memcpy(skb_put(agg_skb, skb->len), skb->data, skb->len);
}
- for (i = 0; i < pSendList->nr_drv_agg_frames; i++) {
+ for (i = 0; i < pSendList->nr_drv_agg_frames; i++)
dev_kfree_skb_any(pSendList->tx_agg_frames[i]);
- }
return agg_skb;
}
If no proper TCB is found to do aggregation, SendList will only contain the input TCB.
*/
u8 DrvAggr_GetAggregatibleList(struct net_device *dev, struct sk_buff *skb,
- struct ieee80211_drv_agg_txb *pSendList)
+ struct ieee80211_drv_agg_txb *pSendList)
{
struct ieee80211_device *ieee = netdev_priv(dev);
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
do {
pSendList->tx_agg_frames[pSendList->nr_drv_agg_frames++] = skb;
- if (pSendList->nr_drv_agg_frames >= nMaxAggrNum) {
+ if (pSendList->nr_drv_agg_frames >= nMaxAggrNum)
break;
- }
} while ((skb = skb_dequeue(&ieee->skb_drv_aggQ[QueueID])));
struct r8192_priv *priv = NULL;
cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
u8 queue_index = tcb_desc->queue_index;
-// bool bToSend0Byte;
-// u16 BufLen = skb->len;
memcpy(&dev, (struct net_device *)(skb->cb), sizeof(struct net_device *));
priv = ieee80211_priv(dev);
if (tcb_desc->queue_index != TXCMD_QUEUE) {
if (tx_urb->status == 0) {
dev->trans_start = jiffies;
- // Act as station mode, destination shall be unicast address.
- //priv->ieee80211->stats.tx_bytes+=(skb->len - priv->ieee80211->tx_headroom);
- //priv->ieee80211->stats.tx_packets++;
priv->stats.txoktotal++;
priv->ieee80211->LinkDetectInfo.NumTxOkInPeriod++;
priv->stats.txbytesunicast += (skb->len - priv->ieee80211->tx_headroom);
} else {
priv->ieee80211->stats.tx_errors++;
- //priv->stats.txmanageerr++;
/* TODO */
}
}
atomic_dec(&priv->tx_pending[queue_index]);
}
- {
- //
- // Handle HW Beacon:
- // We had transfer our beacon frame to host controller at this moment.
- //
- //
- // Caution:
- // Handling the wait queue of command packets.
- // For Tx command packets, we must not do TCB fragment because it is not handled right now.
- // We must cut the packets to match the size of TX_CMD_PKT before we send it.
- //
+ //
+ // Handle HW Beacon:
+ // We had transfer our beacon frame to host controller at this moment.
+ //
+ //
+ // Caution:
+ // Handling the wait queue of command packets.
+ // For Tx command packets, we must not do TCB fragment because it is not handled right now.
+ // We must cut the packets to match the size of TX_CMD_PKT before we send it.
+ //
- /* Handle MPDU in wait queue. */
- if (queue_index != BEACON_QUEUE) {
- /* Don't send data frame during scanning.*/
- if ((skb_queue_len(&priv->ieee80211->skb_waitQ[queue_index]) != 0)&&\
- (!(priv->ieee80211->queue_stop))) {
- if (NULL != (skb = skb_dequeue(&(priv->ieee80211->skb_waitQ[queue_index]))))
- priv->ieee80211->softmac_hard_start_xmit(skb, dev);
+ /* Handle MPDU in wait queue. */
+ if (queue_index != BEACON_QUEUE) {
+ /* Don't send data frame during scanning.*/
+ if ((skb_queue_len(&priv->ieee80211->skb_waitQ[queue_index]) != 0) &&
+ (!(priv->ieee80211->queue_stop))) {
+ if (NULL != (skb = skb_dequeue(&(priv->ieee80211->skb_waitQ[queue_index]))))
+ priv->ieee80211->softmac_hard_start_xmit(skb, dev);
- return; //modified by david to avoid further processing AMSDU
- }
+ return; //modified by david to avoid further processing AMSDU
+ }
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- else if ((skb_queue_len(&priv->ieee80211->skb_drv_aggQ[queue_index]) != 0)&&\
- (!(priv->ieee80211->queue_stop))) {
- // Tx Driver Aggregation process
- /* The driver will aggregation the packets according to the following stats
- * 1. check whether there's tx irq available, for it's a completion return
- * function, it should contain enough tx irq;
- * 2. check packet type;
- * 3. initialize sendlist, check whether the to-be send packet no greater than 1
- * 4. aggregates the packets, and fill firmware info and tx desc into it, etc.
- * 5. check whether the packet could be sent, otherwise just insert into wait head
- * */
- skb = skb_dequeue(&priv->ieee80211->skb_drv_aggQ[queue_index]);
- if (!check_nic_enough_desc(dev, queue_index)) {
- skb_queue_head(&(priv->ieee80211->skb_drv_aggQ[queue_index]), skb);
- return;
- }
+ else if ((skb_queue_len(&priv->ieee80211->skb_drv_aggQ[queue_index]) != 0) &&
+ (!(priv->ieee80211->queue_stop))) {
+ // Tx Driver Aggregation process
+ /* The driver will aggregation the packets according to the following stats
+ * 1. check whether there's tx irq available, for it's a completion return
+ * function, it should contain enough tx irq;
+ * 2. check packet type;
+ * 3. initialize sendlist, check whether the to-be send packet no greater than 1
+ * 4. aggregates the packets, and fill firmware info and tx desc into it, etc.
+ * 5. check whether the packet could be sent, otherwise just insert into wait head
+ * */
+ skb = skb_dequeue(&priv->ieee80211->skb_drv_aggQ[queue_index]);
+ if (!check_nic_enough_desc(dev, queue_index)) {
+ skb_queue_head(&(priv->ieee80211->skb_drv_aggQ[queue_index]), skb);
+ return;
+ }
+
+ /*TODO*/
+ {
+ struct ieee80211_drv_agg_txb SendList;
+
+ memset(&SendList, 0, sizeof(struct ieee80211_drv_agg_txb));
+ if (DrvAggr_GetAggregatibleList(dev, skb, &SendList) > 1) {
+ skb = DrvAggr_Aggregation(dev, &SendList);
- {
- /*TODO*/
- /*
- u8* pHeader = skb->data;
-
- if(IsMgntQosData(pHeader) ||
- IsMgntQData_Ack(pHeader) ||
- IsMgntQData_Poll(pHeader) ||
- IsMgntQData_Poll_Ack(pHeader)
- )
- */
- {
- struct ieee80211_drv_agg_txb SendList;
-
- memset(&SendList, 0, sizeof(struct ieee80211_drv_agg_txb));
- if (DrvAggr_GetAggregatibleList(dev, skb, &SendList) > 1) {
- skb = DrvAggr_Aggregation(dev, &SendList);
-
- }
- }
- priv->ieee80211->softmac_hard_start_xmit(skb, dev);
}
}
-#endif
+ priv->ieee80211->softmac_hard_start_xmit(skb, dev);
}
+#endif
}
}
u8 msr, msrm, msr2;
struct r8192_priv *priv = ieee80211_priv(dev);
- msr = read_nic_byte(dev, MSR);
+ read_nic_byte(dev, MSR, &msr);
msrm = msr & MSR_LINK_MASK;
msr2 = msr & ~MSR_LINK_MASK;
- if (NIC_8192U == priv->card_8192) {
+ if (NIC_8192U == priv->card_8192)
usb_kill_urb(priv->rx_urb[MAX_RX_URB]);
- }
if ((msrm == (MSR_LINK_ADHOC<<MSR_LINK_SHIFT) ||
- (msrm == (MSR_LINK_MASTER<<MSR_LINK_SHIFT)))){
+ (msrm == (MSR_LINK_MASTER<<MSR_LINK_SHIFT)))) {
write_nic_byte(dev, MSR, msr2 | MSR_LINK_NONE);
write_nic_byte(dev, MSR, msr);
}
void rtl8192_config_rate(struct net_device *dev, u16 *rate_config)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
- struct ieee80211_network *net;
- u8 i = 0, basic_rate = 0;
- net = & priv->ieee80211->current_network;
-
- for (i = 0; i < net->rates_len; i++)
- {
- basic_rate = net->rates[i]&0x7f;
- switch (basic_rate)
- {
- case MGN_1M: *rate_config |= RRSR_1M; break;
- case MGN_2M: *rate_config |= RRSR_2M; break;
- case MGN_5_5M: *rate_config |= RRSR_5_5M; break;
- case MGN_11M: *rate_config |= RRSR_11M; break;
- case MGN_6M: *rate_config |= RRSR_6M; break;
- case MGN_9M: *rate_config |= RRSR_9M; break;
- case MGN_12M: *rate_config |= RRSR_12M; break;
- case MGN_18M: *rate_config |= RRSR_18M; break;
- case MGN_24M: *rate_config |= RRSR_24M; break;
- case MGN_36M: *rate_config |= RRSR_36M; break;
- case MGN_48M: *rate_config |= RRSR_48M; break;
- case MGN_54M: *rate_config |= RRSR_54M; break;
- }
- }
- for (i = 0; i < net->rates_ex_len; i++)
- {
- basic_rate = net->rates_ex[i]&0x7f;
- switch (basic_rate)
- {
- case MGN_1M: *rate_config |= RRSR_1M; break;
- case MGN_2M: *rate_config |= RRSR_2M; break;
- case MGN_5_5M: *rate_config |= RRSR_5_5M; break;
- case MGN_11M: *rate_config |= RRSR_11M; break;
- case MGN_6M: *rate_config |= RRSR_6M; break;
- case MGN_9M: *rate_config |= RRSR_9M; break;
- case MGN_12M: *rate_config |= RRSR_12M; break;
- case MGN_18M: *rate_config |= RRSR_18M; break;
- case MGN_24M: *rate_config |= RRSR_24M; break;
- case MGN_36M: *rate_config |= RRSR_36M; break;
- case MGN_48M: *rate_config |= RRSR_48M; break;
- case MGN_54M: *rate_config |= RRSR_54M; break;
- }
- }
+ struct r8192_priv *priv = ieee80211_priv(dev);
+ struct ieee80211_network *net;
+ u8 i = 0, basic_rate = 0;
+ net = &priv->ieee80211->current_network;
+
+ for (i = 0; i < net->rates_len; i++) {
+ basic_rate = net->rates[i]&0x7f;
+ switch (basic_rate) {
+ case MGN_1M: *rate_config |= RRSR_1M; break;
+ case MGN_2M: *rate_config |= RRSR_2M; break;
+ case MGN_5_5M: *rate_config |= RRSR_5_5M; break;
+ case MGN_11M: *rate_config |= RRSR_11M; break;
+ case MGN_6M: *rate_config |= RRSR_6M; break;
+ case MGN_9M: *rate_config |= RRSR_9M; break;
+ case MGN_12M: *rate_config |= RRSR_12M; break;
+ case MGN_18M: *rate_config |= RRSR_18M; break;
+ case MGN_24M: *rate_config |= RRSR_24M; break;
+ case MGN_36M: *rate_config |= RRSR_36M; break;
+ case MGN_48M: *rate_config |= RRSR_48M; break;
+ case MGN_54M: *rate_config |= RRSR_54M; break;
+ }
+ }
+ for (i = 0; i < net->rates_ex_len; i++) {
+ basic_rate = net->rates_ex[i]&0x7f;
+ switch (basic_rate) {
+ case MGN_1M: *rate_config |= RRSR_1M; break;
+ case MGN_2M: *rate_config |= RRSR_2M; break;
+ case MGN_5_5M: *rate_config |= RRSR_5_5M; break;
+ case MGN_11M: *rate_config |= RRSR_11M; break;
+ case MGN_6M: *rate_config |= RRSR_6M; break;
+ case MGN_9M: *rate_config |= RRSR_9M; break;
+ case MGN_12M: *rate_config |= RRSR_12M; break;
+ case MGN_18M: *rate_config |= RRSR_18M; break;
+ case MGN_24M: *rate_config |= RRSR_24M; break;
+ case MGN_36M: *rate_config |= RRSR_36M; break;
+ case MGN_48M: *rate_config |= RRSR_48M; break;
+ case MGN_54M: *rate_config |= RRSR_54M; break;
+ }
+ }
}
tmp |= BRSR_AckShortPmb;
write_nic_dword(dev, RRSR, tmp);
- if (net->mode & (IEEE_G|IEEE_N_24G))
- {
+ if (net->mode & (IEEE_G|IEEE_N_24G)) {
u8 slot_time = 0;
- if ((cap & WLAN_CAPABILITY_SHORT_SLOT)&&(!priv->ieee80211->pHTInfo->bCurrentRT2RTLongSlotTime))
- {//short slot time
+ if ((cap & WLAN_CAPABILITY_SHORT_SLOT) && (!priv->ieee80211->pHTInfo->bCurrentRT2RTLongSlotTime)) //short slot time
slot_time = SHORT_SLOT_TIME;
- }
else //long slot time
slot_time = NON_SHORT_SLOT_TIME;
priv->slot_time = slot_time;
struct ieee80211_network *net;
u16 BcnTimeCfg = 0, BcnCW = 6, BcnIFS = 0xf;
u16 rate_config = 0;
- net = & priv->ieee80211->current_network;
+ net = &priv->ieee80211->current_network;
rtl8192_config_rate(dev, &rate_config);
priv->basic_rate = rate_config &= 0x15f;
write_nic_dword(dev, BSSIDR, ((u32 *)net->bssid)[0]);
write_nic_word(dev, BSSIDR+4, ((u16 *)net->bssid)[2]);
- //for(i=0;i<ETH_ALEN;i++)
- // write_nic_byte(dev,BSSID+i,net->bssid[i]);
rtl8192_update_msr(dev);
-// rtl8192_update_cap(dev, net->capability);
- if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
- {
- write_nic_word(dev, ATIMWND, 2);
- write_nic_word(dev, BCN_DMATIME, 1023);
- write_nic_word(dev, BCN_INTERVAL, net->beacon_interval);
-// write_nic_word(dev, BcnIntTime, 100);
- write_nic_word(dev, BCN_DRV_EARLY_INT, 1);
- write_nic_byte(dev, BCN_ERR_THRESH, 100);
+ if (priv->ieee80211->iw_mode == IW_MODE_ADHOC) {
+ write_nic_word(dev, ATIMWND, 2);
+ write_nic_word(dev, BCN_DMATIME, 1023);
+ write_nic_word(dev, BCN_INTERVAL, net->beacon_interval);
+ write_nic_word(dev, BCN_DRV_EARLY_INT, 1);
+ write_nic_byte(dev, BCN_ERR_THRESH, 100);
BcnTimeCfg |= (BcnCW<<BCN_TCFG_CW_SHIFT);
- // TODO: BcnIFS may required to be changed on ASIC
+ // TODO: BcnIFS may required to be changed on ASIC
BcnTimeCfg |= BcnIFS<<BCN_TCFG_IFS;
- write_nic_word(dev, BCN_TCFG, BcnTimeCfg);
+ write_nic_word(dev, BCN_TCFG, BcnTimeCfg);
}
u16 N_DBPSOfRate(u16 DataRate);
-u16 ComputeTxTime(
- u16 FrameLength,
- u16 DataRate,
- u8 bManagementFrame,
- u8 bShortPreamble
-)
+u16 ComputeTxTime(u16 FrameLength, u16 DataRate, u8 bManagementFrame,
+ u8 bShortPreamble)
{
u16 FrameTime;
u16 N_DBPS;
u16 Ceiling;
- if (rtl8192_IsWirelessBMode(DataRate))
- {
- if (bManagementFrame || !bShortPreamble || DataRate == 10)
- { // long preamble
+ if (rtl8192_IsWirelessBMode(DataRate)) {
+ if (bManagementFrame || !bShortPreamble || DataRate == 10) // long preamble
FrameTime = (u16)(144+48+(FrameLength*8/(DataRate/10)));
- }
- else
- { // Short preamble
+ else // Short preamble
FrameTime = (u16)(72+24+(FrameLength*8/(DataRate/10)));
- }
if ((FrameLength*8 % (DataRate/10)) != 0) //Get the Ceilling
- FrameTime ++;
+ FrameTime++;
} else { //802.11g DSSS-OFDM PLCP length field calculation.
N_DBPS = N_DBPSOfRate(DataRate);
Ceiling = (16 + 8*FrameLength + 6) / N_DBPS
- + (((16 + 8*FrameLength + 6) % N_DBPS) ? 1 : 0);
+ + (((16 + 8*FrameLength + 6) % N_DBPS) ? 1 : 0);
FrameTime = (u16)(16 + 4 + 4*Ceiling + 6);
}
return FrameTime;
u16 N_DBPSOfRate(u16 DataRate)
{
- u16 N_DBPS = 24;
+ u16 N_DBPS = 24;
- switch (DataRate)
- {
- case 60:
- N_DBPS = 24;
- break;
+ switch (DataRate) {
+ case 60:
+ N_DBPS = 24;
+ break;
- case 90:
- N_DBPS = 36;
- break;
+ case 90:
+ N_DBPS = 36;
+ break;
- case 120:
- N_DBPS = 48;
- break;
+ case 120:
+ N_DBPS = 48;
+ break;
- case 180:
- N_DBPS = 72;
- break;
+ case 180:
+ N_DBPS = 72;
+ break;
- case 240:
- N_DBPS = 96;
- break;
+ case 240:
+ N_DBPS = 96;
+ break;
- case 360:
- N_DBPS = 144;
- break;
+ case 360:
+ N_DBPS = 144;
+ break;
- case 480:
- N_DBPS = 192;
- break;
+ case 480:
+ N_DBPS = 192;
+ break;
- case 540:
- N_DBPS = 216;
- break;
+ case 540:
+ N_DBPS = 216;
+ break;
- default:
- break;
- }
+ default:
+ break;
+ }
- return N_DBPS;
+ return N_DBPS;
}
void rtl819xU_cmd_isr(struct urb *tx_cmd_urb, struct pt_regs *regs)
usb_free_urb(tx_cmd_urb);
}
-unsigned int txqueue2outpipe(struct r8192_priv *priv, unsigned int tx_queue) {
-
- if (tx_queue >= 9)
- {
+unsigned int txqueue2outpipe(struct r8192_priv *priv, unsigned int tx_queue)
+{
+ if (tx_queue >= 9) {
RT_TRACE(COMP_ERR, "%s():Unknown queue ID!!!\n", __func__);
return 0x04;
}
short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- //u8 *tx;
int status;
struct urb *tx_urb;
- //int urb_buf_len;
unsigned int idx_pipe;
tx_desc_cmd_819x_usb *pdesc = (tx_desc_cmd_819x_usb *)skb->data;
cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
u8 queue_index = tcb_desc->queue_index;
- //printk("\n %s::queue_index = %d\n",__FUNCTION__, queue_index);
atomic_inc(&priv->tx_pending[queue_index]);
tx_urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (!tx_urb){
+ if (!tx_urb) {
dev_kfree_skb(skb);
return -ENOMEM;
}
printk("%8x ", tx[i]);
printk("\n");
#endif
- usb_fill_bulk_urb(tx_urb, priv->udev, usb_sndbulkpipe(priv->udev, idx_pipe), \
- skb->data, skb->len, rtl8192_tx_isr, skb);
+ usb_fill_bulk_urb(tx_urb, priv->udev, usb_sndbulkpipe(priv->udev, idx_pipe),
+ skb->data, skb->len, rtl8192_tx_isr, skb);
status = usb_submit_urb(tx_urb, GFP_ATOMIC);
- if (!status){
+ if (!status) {
return 0;
- } else{
- DMESGE("Error TX CMD URB, error %d",
- status);
+ } else {
+ DMESGE("Error TX CMD URB, error %d", status);
return -1;
}
}
switch (QueueID) {
case BE_QUEUE:
- QueueSelect = QSLT_BE; //or QSelect = pTcb->priority;
+ QueueSelect = QSLT_BE;
break;
case BK_QUEUE:
- QueueSelect = QSLT_BK; //or QSelect = pTcb->priority;
+ QueueSelect = QSLT_BK;
break;
case VO_QUEUE:
- QueueSelect = QSLT_VO; //or QSelect = pTcb->priority;
+ QueueSelect = QSLT_VO;
break;
case VI_QUEUE:
- QueueSelect = QSLT_VI; //or QSelect = pTcb->priority;
+ QueueSelect = QSLT_VI;
break;
case MGNT_QUEUE:
QueueSelect = QSLT_MGNT;
// TODO: 2006.10.30 mark other queue selection until we verify it is OK
// TODO: Remove Assertions
-//#if (RTL819X_FPGA_VER & RTL819X_FPGA_GUANGAN_070502)
case TXCMD_QUEUE:
QueueSelect = QSLT_CMD;
break;
-//#endif
case HIGH_QUEUE:
QueueSelect = QSLT_HIGH;
break;
{
u8 tmp_Short;
- tmp_Short = (TxHT == 1)?((tcb_desc->bUseShortGI)?1:0):((tcb_desc->bUseShortPreamble)?1:0);
+ tmp_Short = (TxHT == 1) ? ((tcb_desc->bUseShortGI) ? 1 : 0) : ((tcb_desc->bUseShortPreamble) ? 1 : 0);
if (TxHT == 1 && TxRate != DESC90_RATEMCS15)
tmp_Short = 0;
int pend;
int status;
struct urb *tx_urb = NULL, *tx_urb_zero = NULL;
- //int urb_len;
unsigned int idx_pipe;
-// RT_DEBUG_DATA(COMP_SEND, tcb_desc, sizeof(cb_desc));
-// printk("=============> %s\n", __FUNCTION__);
pend = atomic_read(&priv->tx_pending[tcb_desc->queue_index]);
/* we are locked here so the two atomic_read and inc are executed
* without interleaves
* !!! For debug purpose
*/
- if (pend > MAX_TX_URB){
- printk("To discard skb packet!\n");
+ if (pend > MAX_TX_URB) {
+ netdev_dbg(dev, "To discard skb packet!\n");
dev_kfree_skb_any(skb);
return -1;
}
tx_urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (!tx_urb){
+ if (!tx_urb) {
dev_kfree_skb_any(skb);
return -ENOMEM;
}
/* Fill Tx firmware info */
memset(tx_fwinfo, 0, sizeof(tx_fwinfo_819x_usb));
/* DWORD 0 */
- tx_fwinfo->TxHT = (tcb_desc->data_rate&0x80)?1:0;
+ tx_fwinfo->TxHT = (tcb_desc->data_rate&0x80) ? 1 : 0;
tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate);
tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur;
tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc);
}
/* Protection mode related */
- tx_fwinfo->RtsEnable = (tcb_desc->bRTSEnable)?1:0;
- tx_fwinfo->CtsEnable = (tcb_desc->bCTSEnable)?1:0;
- tx_fwinfo->RtsSTBC = (tcb_desc->bRTSSTBC)?1:0;
- tx_fwinfo->RtsHT = (tcb_desc->rts_rate&0x80)?1:0;
+ tx_fwinfo->RtsEnable = (tcb_desc->bRTSEnable) ? 1 : 0;
+ tx_fwinfo->CtsEnable = (tcb_desc->bCTSEnable) ? 1 : 0;
+ tx_fwinfo->RtsSTBC = (tcb_desc->bRTSSTBC) ? 1 : 0;
+ tx_fwinfo->RtsHT = (tcb_desc->rts_rate&0x80) ? 1 : 0;
tx_fwinfo->RtsRate = MRateToHwRate8190Pci((u8)tcb_desc->rts_rate);
- tx_fwinfo->RtsSubcarrier = (tx_fwinfo->RtsHT == 0)?(tcb_desc->RTSSC):0;
- tx_fwinfo->RtsBandwidth = (tx_fwinfo->RtsHT == 1)?((tcb_desc->bRTSBW)?1:0):0;
- tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT == 0)?(tcb_desc->bRTSUseShortPreamble?1:0):\
- (tcb_desc->bRTSUseShortGI?1:0);
+ tx_fwinfo->RtsSubcarrier = (tx_fwinfo->RtsHT == 0) ? (tcb_desc->RTSSC) : 0;
+ tx_fwinfo->RtsBandwidth = (tx_fwinfo->RtsHT == 1) ? ((tcb_desc->bRTSBW) ? 1 : 0) : 0;
+ tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT == 0) ? (tcb_desc->bRTSUseShortPreamble ? 1 : 0) :
+ (tcb_desc->bRTSUseShortGI ? 1 : 0);
/* Set Bandwidth and sub-channel settings. */
- if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
- {
+ if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40) {
if (tcb_desc->bPacketBW) {
tx_fwinfo->TxBandwidth = 1;
tx_fwinfo->TxSubCarrier = 0; //By SD3's Jerry suggestion, use duplicated mode
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
if (tcb_desc->drv_agg_enable)
- {
tx_fwinfo->Tx_INFO_RSVD = (tcb_desc->DrvAggrNum & 0x1f) << 1;
- }
#endif
/* Fill Tx descriptor */
memset(tx_desc, 0, sizeof(tx_desc_819x_usb));
tx_desc->Offset = sizeof(tx_fwinfo_819x_usb) + 8;
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- if (tcb_desc->drv_agg_enable) {
+ if (tcb_desc->drv_agg_enable)
tx_desc->PktSize = tcb_desc->pkt_size;
- } else
+ else
#endif
{
tx_desc->PktSize = (skb->len - TX_PACKET_SHIFT_BYTES) & 0xffff;
/*DWORD 1*/
tx_desc->SecCAMID = 0;
tx_desc->RATid = tcb_desc->RATRIndex;
- {
- //MPDUOverhead = 0;
- tx_desc->NoEnc = 1;
- }
+ tx_desc->NoEnc = 1;
tx_desc->SecType = 0x0;
- if (tcb_desc->bHwSec)
- {
- switch (priv->ieee80211->pairwise_key_type)
- {
- case KEY_TYPE_WEP40:
- case KEY_TYPE_WEP104:
- tx_desc->SecType = 0x1;
- tx_desc->NoEnc = 0;
- break;
- case KEY_TYPE_TKIP:
- tx_desc->SecType = 0x2;
- tx_desc->NoEnc = 0;
- break;
- case KEY_TYPE_CCMP:
- tx_desc->SecType = 0x3;
- tx_desc->NoEnc = 0;
- break;
- case KEY_TYPE_NA:
- tx_desc->SecType = 0x0;
- tx_desc->NoEnc = 1;
- break;
- }
- }
+ if (tcb_desc->bHwSec) {
+ switch (priv->ieee80211->pairwise_key_type) {
+ case KEY_TYPE_WEP40:
+ case KEY_TYPE_WEP104:
+ tx_desc->SecType = 0x1;
+ tx_desc->NoEnc = 0;
+ break;
+ case KEY_TYPE_TKIP:
+ tx_desc->SecType = 0x2;
+ tx_desc->NoEnc = 0;
+ break;
+ case KEY_TYPE_CCMP:
+ tx_desc->SecType = 0x3;
+ tx_desc->NoEnc = 0;
+ break;
+ case KEY_TYPE_NA:
+ tx_desc->SecType = 0x0;
+ tx_desc->NoEnc = 1;
+ break;
+ }
+ }
tx_desc->QueueSelect = MapHwQueueToFirmwareQueue(tcb_desc->queue_index);
tx_desc->TxFWInfoSize = sizeof(tx_fwinfo_819x_usb);
idx_pipe = 0x5;
#endif
- //RT_DEBUG_DATA(COMP_SEND,tx_fwinfo,sizeof(tx_fwinfo_819x_usb));
- //RT_DEBUG_DATA(COMP_SEND,tx_desc,sizeof(tx_desc_819x_usb));
-
/* To submit bulk urb */
usb_fill_bulk_urb(tx_urb, udev,
- usb_sndbulkpipe(udev, idx_pipe), skb->data,
- skb->len, rtl8192_tx_isr, skb);
+ usb_sndbulkpipe(udev, idx_pipe), skb->data,
+ skb->len, rtl8192_tx_isr, skb);
status = usb_submit_urb(tx_urb, GFP_ATOMIC);
- if (!status){
-//we need to send 0 byte packet whenever 512N bytes/64N(HIGN SPEED/NORMAL SPEED) bytes packet has been transmitted. Otherwise, it will be halt to wait for another packet. WB. 2008.08.27
+ if (!status) {
+ //we need to send 0 byte packet whenever 512N bytes/64N(HIGN SPEED/NORMAL SPEED) bytes packet has been transmitted. Otherwise, it will be halt to wait for another packet. WB. 2008.08.27
bool bSend0Byte = false;
u8 zero = 0;
- if (udev->speed == USB_SPEED_HIGH)
- {
+ if (udev->speed == USB_SPEED_HIGH) {
if (skb->len > 0 && skb->len % 512 == 0)
bSend0Byte = true;
- }
- else
- {
+ } else {
if (skb->len > 0 && skb->len % 64 == 0)
bSend0Byte = true;
}
- if (bSend0Byte)
- {
+ if (bSend0Byte) {
tx_urb_zero = usb_alloc_urb(0, GFP_ATOMIC);
- if (!tx_urb_zero){
+ if (!tx_urb_zero) {
RT_TRACE(COMP_ERR, "can't alloc urb for zero byte\n");
return -ENOMEM;
}
usb_fill_bulk_urb(tx_urb_zero, udev,
- usb_sndbulkpipe(udev, idx_pipe), &zero,
- 0, tx_zero_isr, dev);
+ usb_sndbulkpipe(udev, idx_pipe), &zero,
+ 0, tx_zero_isr, dev);
status = usb_submit_urb(tx_urb_zero, GFP_ATOMIC);
- if (status){
- RT_TRACE(COMP_ERR, "Error TX URB for zero byte %d, error %d", atomic_read(&priv->tx_pending[tcb_desc->queue_index]), status);
- return -1;
+ if (status) {
+ RT_TRACE(COMP_ERR, "Error TX URB for zero byte %d, error %d", atomic_read(&priv->tx_pending[tcb_desc->queue_index]), status);
+ return -1;
}
}
dev->trans_start = jiffies;
return 0;
} else {
RT_TRACE(COMP_ERR, "Error TX URB %d, error %d", atomic_read(&priv->tx_pending[tcb_desc->queue_index]),
- status);
+ status);
return -1;
}
}
struct r8192_priv *priv = ieee80211_priv(dev);
priv->rx_urb = kmalloc(sizeof(struct urb *) * (MAX_RX_URB+1),
- GFP_KERNEL);
+ GFP_KERNEL);
if (priv->rx_urb == NULL)
return -ENOMEM;
#ifndef JACKSON_NEW_RX
- for (i = 0; i < (MAX_RX_URB+1); i++){
+ for (i = 0; i < (MAX_RX_URB+1); i++) {
priv->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
#endif
#ifdef THOMAS_BEACON
-{
- long align = 0;
- void *oldaddr, *newaddr;
-
- priv->rx_urb[16] = usb_alloc_urb(0, GFP_KERNEL);
- priv->oldaddr = kmalloc(16, GFP_KERNEL);
- oldaddr = priv->oldaddr;
- align = ((long)oldaddr) & 3;
- if (align) {
- newaddr = oldaddr + 4 - align;
- priv->rx_urb[16]->transfer_buffer_length = 16 - 4 + align;
- } else {
- newaddr = oldaddr;
- priv->rx_urb[16]->transfer_buffer_length = 16;
+ {
+ long align = 0;
+ void *oldaddr, *newaddr;
+
+ priv->rx_urb[16] = usb_alloc_urb(0, GFP_KERNEL);
+ priv->oldaddr = kmalloc(16, GFP_KERNEL);
+ oldaddr = priv->oldaddr;
+ align = ((long)oldaddr) & 3;
+ if (align) {
+ newaddr = oldaddr + 4 - align;
+ priv->rx_urb[16]->transfer_buffer_length = 16 - 4 + align;
+ } else {
+ newaddr = oldaddr;
+ priv->rx_urb[16]->transfer_buffer_length = 16;
+ }
+ priv->rx_urb[16]->transfer_buffer = newaddr;
}
- priv->rx_urb[16]->transfer_buffer = newaddr;
-}
#endif
memset(priv->rx_urb, 0, sizeof(struct urb *) * MAX_RX_URB);
return -ENOMEM;
}
- printk("End of initendpoints\n");
+ netdev_dbg(dev, "End of initendpoints\n");
return 0;
}
int i;
struct r8192_priv *priv = ieee80211_priv(dev);
- if (priv->rx_urb){
- for (i = 0; i < (MAX_RX_URB+1); i++){
+ if (priv->rx_urb) {
+ for (i = 0; i < (MAX_RX_URB+1); i++) {
usb_kill_urb(priv->rx_urb[i]);
usb_free_urb(priv->rx_urb[i]);
}
#ifndef JACKSON_NEW_RX
- if (priv->rx_urb){
- for (i = 0; i < (MAX_RX_URB+1); i++){
+ if (priv->rx_urb) {
+ for (i = 0; i < (MAX_RX_URB+1); i++) {
usb_kill_urb(priv->rx_urb[i]);
kfree(priv->rx_urb[i]->transfer_buffer);
usb_free_urb(priv->rx_urb[i]);
extern void rtl8192_update_ratr_table(struct net_device *dev);
void rtl8192_link_change(struct net_device *dev)
{
-// int i;
-
struct r8192_priv *priv = ieee80211_priv(dev);
struct ieee80211_device *ieee = priv->ieee80211;
- //write_nic_word(dev, BCN_INTR_ITV, net->beacon_interval);
- if (ieee->state == IEEE80211_LINKED)
- {
+ if (ieee->state == IEEE80211_LINKED) {
rtl8192_net_update(dev);
rtl8192_update_ratr_table(dev);
//add this as in pure N mode, wep encryption will use software way, but there is no chance to set this as wep will not set group key in wext. WB.2008.07.08
if ((KEY_TYPE_WEP40 == ieee->pairwise_key_type) || (KEY_TYPE_WEP104 == ieee->pairwise_key_type))
- EnableHWSecurityConfig8192(dev);
+ EnableHWSecurityConfig8192(dev);
}
/*update timing params*/
-// RT_TRACE(COMP_CH, "========>%s(), chan:%d\n", __FUNCTION__, priv->chan);
-// rtl8192_set_chan(dev, priv->chan);
- if (ieee->iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC)
- {
+ if (ieee->iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC) {
u32 reg = 0;
- reg = read_nic_dword(dev, RCR);
+ read_nic_dword(dev, RCR, ®);
if (priv->ieee80211->state == IEEE80211_LINKED)
priv->ReceiveConfig = reg |= RCR_CBSSID;
else
priv->ReceiveConfig = reg &= ~RCR_CBSSID;
write_nic_dword(dev, RCR, reg);
}
-
-// rtl8192_set_rxconf(dev);
}
static struct ieee80211_qos_parameters def_qos_parameters = {
struct net_device *dev = priv->ieee80211->dev;
struct ieee80211_qos_parameters *qos_parameters = &priv->ieee80211->current_network.qos_data.parameters;
u8 mode = priv->ieee80211->current_network.mode;
- //u32 size = sizeof(struct ieee80211_qos_parameters);
u8 u1bAIFS;
u32 u4bAcParam;
int i;
if (priv == NULL)
return;
- mutex_lock(&priv->mutex);
+ mutex_lock(&priv->mutex);
if (priv->ieee80211->state != IEEE80211_LINKED)
goto success;
RT_TRACE(COMP_QOS, "qos active process with associate response received\n");
/* update the ac parameter to related registers */
for (i = 0; i < QOS_QUEUE_NUM; i++) {
//Mode G/A: slotTimeTimer = 9; Mode B: 20
- u1bAIFS = qos_parameters->aifs[i] * ((mode&(IEEE_G|IEEE_N_24G)) ?9:20) + aSifsTime;
+ u1bAIFS = qos_parameters->aifs[i] * ((mode&(IEEE_G|IEEE_N_24G)) ? 9 : 20) + aSifsTime;
u4bAcParam = ((((u32)(qos_parameters->tx_op_limit[i]))<< AC_PARAM_TXOP_LIMIT_OFFSET)|
- (((u32)(qos_parameters->cw_max[i]))<< AC_PARAM_ECW_MAX_OFFSET)|
- (((u32)(qos_parameters->cw_min[i]))<< AC_PARAM_ECW_MIN_OFFSET)|
- ((u32)u1bAIFS << AC_PARAM_AIFS_OFFSET));
+ (((u32)(qos_parameters->cw_max[i]))<< AC_PARAM_ECW_MAX_OFFSET)|
+ (((u32)(qos_parameters->cw_min[i]))<< AC_PARAM_ECW_MIN_OFFSET)|
+ ((u32)u1bAIFS << AC_PARAM_AIFS_OFFSET));
write_nic_dword(dev, WDCAPARA_ADD[i], u4bAcParam);
- //write_nic_dword(dev, WDCAPARA_ADD[i], 0x005e4332);
}
success:
- mutex_unlock(&priv->mutex);
+ mutex_unlock(&priv->mutex);
}
static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv,
- int active_network,
- struct ieee80211_network *network)
+ int active_network,
+ struct ieee80211_network *network)
{
int ret = 0;
u32 size = sizeof(struct ieee80211_qos_parameters);
if (network->flags & NETWORK_HAS_QOS_MASK) {
if (active_network &&
- (network->flags & NETWORK_HAS_QOS_PARAMETERS))
+ (network->flags & NETWORK_HAS_QOS_PARAMETERS))
network->qos_data.active = network->qos_data.supported;
if ((network->qos_data.active == 1) && (active_network == 1) &&
- (network->flags & NETWORK_HAS_QOS_PARAMETERS) &&
- (network->qos_data.old_param_count !=
- network->qos_data.param_count)) {
+ (network->flags & NETWORK_HAS_QOS_PARAMETERS) &&
+ (network->qos_data.old_param_count !=
+ network->qos_data.param_count)) {
network->qos_data.old_param_count =
network->qos_data.param_count;
queue_work(priv->priv_wq, &priv->qos_activate);
RT_TRACE(COMP_QOS, "QoS parameters change call "
- "qos_activate\n");
+ "qos_activate\n");
}
} else {
- memcpy(&priv->ieee80211->current_network.qos_data.parameters,\
+ memcpy(&priv->ieee80211->current_network.qos_data.parameters,
&def_qos_parameters, size);
if ((network->qos_data.active == 1) && (active_network == 1)) {
/* handle and manage frame from beacon and probe response */
static int rtl8192_handle_beacon(struct net_device *dev,
- struct ieee80211_beacon *beacon,
- struct ieee80211_network *network)
+ struct ieee80211_beacon *beacon,
+ struct ieee80211_network *network)
{
struct r8192_priv *priv = ieee80211_priv(dev);
* setting
*/
static int rtl8192_qos_association_resp(struct r8192_priv *priv,
- struct ieee80211_network *network)
+ struct ieee80211_network *network)
{
int ret = 0;
unsigned long flags;
spin_lock_irqsave(&priv->ieee80211->lock, flags);
if (network->flags & NETWORK_HAS_QOS_PARAMETERS) {
- memcpy(&priv->ieee80211->current_network.qos_data.parameters,\
- &network->qos_data.parameters,\
- sizeof(struct ieee80211_qos_parameters));
+ memcpy(&priv->ieee80211->current_network.qos_data.parameters,
+ &network->qos_data.parameters,
+ sizeof(struct ieee80211_qos_parameters));
priv->ieee80211->current_network.qos_data.active = 1;
- {
- set_qos_param = 1;
- /* update qos parameter for current network */
- priv->ieee80211->current_network.qos_data.old_param_count = \
- priv->ieee80211->current_network.qos_data.param_count;
- priv->ieee80211->current_network.qos_data.param_count = \
- network->qos_data.param_count;
- }
+ set_qos_param = 1;
+ /* update qos parameter for current network */
+ priv->ieee80211->current_network.qos_data.old_param_count =
+ priv->ieee80211->current_network.qos_data.param_count;
+ priv->ieee80211->current_network.qos_data.param_count =
+ network->qos_data.param_count;
} else {
- memcpy(&priv->ieee80211->current_network.qos_data.parameters,\
+ memcpy(&priv->ieee80211->current_network.qos_data.parameters,
&def_qos_parameters, size);
priv->ieee80211->current_network.qos_data.active = 0;
priv->ieee80211->current_network.qos_data.supported = 0;
static int rtl8192_handle_assoc_response(struct net_device *dev,
- struct ieee80211_assoc_response_frame *resp,
- struct ieee80211_network *network)
+ struct ieee80211_assoc_response_frame *resp,
+ struct ieee80211_network *network)
{
struct r8192_priv *priv = ieee80211_priv(dev);
rtl8192_qos_association_resp(priv, network);
void rtl8192_update_ratr_table(struct net_device *dev)
- // POCTET_STRING posLegacyRate,
- // u8* pMcsRate)
- // PRT_WLAN_STA pEntry)
{
struct r8192_priv *priv = ieee80211_priv(dev);
struct ieee80211_device *ieee = priv->ieee80211;
u8 *pMcsRate = ieee->dot11HTOperationalRateSet;
- //struct ieee80211_network *net = &ieee->current_network;
u32 ratr_value = 0;
u8 rate_index = 0;
rtl8192_config_rate(dev, (u16 *)(&ratr_value));
ratr_value |= (*(u16 *)(pMcsRate)) << 12;
-// switch (net->mode)
- switch (ieee->mode)
- {
- case IEEE_A:
- ratr_value &= 0x00000FF0;
- break;
- case IEEE_B:
- ratr_value &= 0x0000000F;
- break;
- case IEEE_G:
- ratr_value &= 0x00000FF7;
- break;
- case IEEE_N_24G:
- case IEEE_N_5G:
- if (ieee->pHTInfo->PeerMimoPs == 0) //MIMO_PS_STATIC
- ratr_value &= 0x0007F007;
- else{
- if (priv->rf_type == RF_1T2R)
- ratr_value &= 0x000FF007;
- else
- ratr_value &= 0x0F81F007;
- }
- break;
- default:
- break;
+ switch (ieee->mode) {
+ case IEEE_A:
+ ratr_value &= 0x00000FF0;
+ break;
+ case IEEE_B:
+ ratr_value &= 0x0000000F;
+ break;
+ case IEEE_G:
+ ratr_value &= 0x00000FF7;
+ break;
+ case IEEE_N_24G:
+ case IEEE_N_5G:
+ if (ieee->pHTInfo->PeerMimoPs == 0) {//MIMO_PS_STATIC
+ ratr_value &= 0x0007F007;
+ } else {
+ if (priv->rf_type == RF_1T2R)
+ ratr_value &= 0x000FF007;
+ else
+ ratr_value &= 0x0F81F007;
+ }
+ break;
+ default:
+ break;
}
ratr_value &= 0x0FFFFFFF;
- if (ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI40MHz){
+ if (ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI40MHz)
ratr_value |= 0x80000000;
- } else if (!ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI20MHz){
+ else if (!ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI20MHz)
ratr_value |= 0x80000000;
- }
write_nic_dword(dev, RATR0+rate_index*4, ratr_value);
write_nic_byte(dev, UFWP, 1);
}
if (encrypt && (wpa_ie_len == 0)) {
/* wep encryption, no N mode setting */
return false;
-// } else if((wpa_ie_len != 0)&&(memcmp(&(ieee->wpa_ie[14]),ccmp_ie,4))) {
} else if ((wpa_ie_len != 0)) {
/* parse pairwise key type */
- //if((pairwisekey = WEP40)||(pairwisekey = WEP104)||(pairwisekey = TKIP))
if (((ieee->wpa_ie[0] == 0xdd) && (!memcmp(&(ieee->wpa_ie[14]), ccmp_ie, 4))) || ((ieee->wpa_ie[0] == 0x30) && (!memcmp(&ieee->wpa_ie[10], ccmp_rsn_ie, 4))))
return true;
else
struct ieee80211_device *ieee = priv->ieee80211;
//we do not consider set support rate for ABG mode, only HT MCS rate is set here.
if (ieee->mode == WIRELESS_MODE_N_24G || ieee->mode == WIRELESS_MODE_N_5G)
- {
memcpy(ieee->Regdot11HTOperationalRateSet, ieee->RegHTSuppRateSet, 16);
- //RT_DEBUG_DATA(COMP_INIT, ieee->RegHTSuppRateSet, 16);
- //RT_DEBUG_DATA(COMP_INIT, ieee->Regdot11HTOperationalRateSet, 16);
- }
else
memset(ieee->Regdot11HTOperationalRateSet, 0, 16);
return;
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 ret = 0;
- switch (priv->rf_chip)
- {
- case RF_8225:
- case RF_8256:
- case RF_PSEUDO_11N:
- ret = (WIRELESS_MODE_N_24G|WIRELESS_MODE_G|WIRELESS_MODE_B);
- break;
- case RF_8258:
- ret = (WIRELESS_MODE_A|WIRELESS_MODE_N_5G);
- break;
- default:
- ret = WIRELESS_MODE_B;
- break;
+ switch (priv->rf_chip) {
+ case RF_8225:
+ case RF_8256:
+ case RF_PSEUDO_11N:
+ ret = (WIRELESS_MODE_N_24G|WIRELESS_MODE_G|WIRELESS_MODE_B);
+ break;
+ case RF_8258:
+ ret = (WIRELESS_MODE_A|WIRELESS_MODE_N_5G);
+ break;
+ default:
+ ret = WIRELESS_MODE_B;
+ break;
}
return ret;
}
struct r8192_priv *priv = ieee80211_priv(dev);
u8 bSupportMode = rtl8192_getSupportedWireleeMode(dev);
- if ((wireless_mode == WIRELESS_MODE_AUTO) || ((wireless_mode&bSupportMode) == 0))
- {
- if (bSupportMode & WIRELESS_MODE_N_24G)
- {
+ if ((wireless_mode == WIRELESS_MODE_AUTO) || ((wireless_mode&bSupportMode) == 0)) {
+ if (bSupportMode & WIRELESS_MODE_N_24G) {
wireless_mode = WIRELESS_MODE_N_24G;
- }
- else if (bSupportMode & WIRELESS_MODE_N_5G)
- {
+ } else if (bSupportMode & WIRELESS_MODE_N_5G) {
wireless_mode = WIRELESS_MODE_N_5G;
- }
- else if ((bSupportMode & WIRELESS_MODE_A))
- {
+ } else if ((bSupportMode & WIRELESS_MODE_A)) {
wireless_mode = WIRELESS_MODE_A;
- }
- else if ((bSupportMode & WIRELESS_MODE_G))
- {
+ } else if ((bSupportMode & WIRELESS_MODE_G)) {
wireless_mode = WIRELESS_MODE_G;
- }
- else if ((bSupportMode & WIRELESS_MODE_B))
- {
+ } else if ((bSupportMode & WIRELESS_MODE_B)) {
wireless_mode = WIRELESS_MODE_B;
- }
- else{
+ } else {
RT_TRACE(COMP_ERR, "%s(), No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n", __func__, bSupportMode);
wireless_mode = WIRELESS_MODE_B;
}
priv->ieee80211->rts = DEFAULT_RTS_THRESHOLD;
priv->ieee80211->rate = 110; //11 mbps
priv->ieee80211->short_slot = 1;
- priv->promisc = (dev->flags & IFF_PROMISC) ? 1:0;
+ priv->promisc = (dev->flags & IFF_PROMISC) ? 1 : 0;
priv->CckPwEnl = 6;
//for silent reset
priv->IrpPendingCount = 1;
priv->ieee80211->softmac_features = IEEE_SOFTMAC_SCAN |
IEEE_SOFTMAC_ASSOCIATE | IEEE_SOFTMAC_PROBERQ |
IEEE_SOFTMAC_PROBERS | IEEE_SOFTMAC_TX_QUEUE |
- IEEE_SOFTMAC_BEACONS;//added by amy 080604 //| //IEEE_SOFTMAC_SINGLE_QUEUE;
+ IEEE_SOFTMAC_BEACONS;//added by amy 080604
priv->ieee80211->active_scan = 1;
priv->ieee80211->modulation = IEEE80211_CCK_MODULATION | IEEE80211_OFDM_MODULATION;
priv->ieee80211->host_encrypt = 1;
priv->ieee80211->host_decrypt = 1;
- priv->ieee80211->start_send_beacons = NULL;//rtl819xusb_beacon_tx;//-by amy 080604
- priv->ieee80211->stop_send_beacons = NULL;//rtl8192_beacon_stop;//-by amy 080604
+ priv->ieee80211->start_send_beacons = NULL; //-by amy 080604
+ priv->ieee80211->stop_send_beacons = NULL; //-by amy 080604
priv->ieee80211->softmac_hard_start_xmit = rtl8192_hard_start_xmit;
priv->ieee80211->set_chan = rtl8192_set_chan;
priv->ieee80211->link_change = rtl8192_link_change;
priv->ieee80211->qos_support = 1;
//added by WB
-// priv->ieee80211->SwChnlByTimerHandler = rtl8192_phy_SwChnl;
priv->ieee80211->SetBWModeHandler = rtl8192_SetBWMode;
priv->ieee80211->handle_assoc_response = rtl8192_handle_assoc_response;
priv->ieee80211->handle_beacon = rtl8192_handle_beacon;
priv->ieee80211->InitialGainHandler = InitialGain819xUsb;
priv->card_type = USB;
#ifdef TO_DO_LIST
- if (Adapter->bInHctTest)
- {
+ if (Adapter->bInHctTest) {
pHalData->ShortRetryLimit = 7;
pHalData->LongRetryLimit = 7;
}
#endif
- {
- priv->ShortRetryLimit = 0x30;
- priv->LongRetryLimit = 0x30;
- }
+ priv->ShortRetryLimit = 0x30;
+ priv->LongRetryLimit = 0x30;
priv->EarlyRxThreshold = 7;
priv->enable_gpio0 = 0;
priv->TransmitConfig =
- // TCR_DurProcMode | //for RTL8185B, duration setting by HW
- //? TCR_DISReqQsize |
(TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)| // Max DMA Burst Size per Tx DMA Burst, 7: reserved.
(priv->ShortRetryLimit<<TCR_SRL_OFFSET)| // Short retry limit
(priv->LongRetryLimit<<TCR_LRL_OFFSET) | // Long retry limit
- (false ? TCR_SAT: 0); // FALSE: HW provides PLCP length and LENGEXT, TRUE: SW provides them
+ (false ? TCR_SAT : 0); // FALSE: HW provides PLCP length and LENGEXT, TRUE: SW provides them
#ifdef TO_DO_LIST
if (Adapter->bInHctTest)
pHalData->ReceiveConfig = pHalData->CSMethod |
- RCR_AMF | RCR_ADF | //RCR_AAP | //accept management/data
+ RCR_AMF | RCR_ADF | //accept management/data
//guangan200710
RCR_ACF | //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko.
RCR_AB | RCR_AM | RCR_APM | //accept BC/MC/UC
RCR_AICV | RCR_ACRC32 | //accept ICV/CRC error packet
((u32)7<<RCR_MXDMA_OFFSET) | // Max DMA Burst Size per Rx DMA Burst, 7: unlimited.
(pHalData->EarlyRxThreshold<<RCR_FIFO_OFFSET) | // Rx FIFO Threshold, 7: No Rx threshold.
- (pHalData->EarlyRxThreshold == 7 ? RCR_OnlyErlPkt:0);
+ (pHalData->EarlyRxThreshold == 7 ? RCR_OnlyErlPkt : 0);
else
#endif
RCR_AMF | RCR_ADF | //accept management/data
RCR_ACF | //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko.
RCR_AB | RCR_AM | RCR_APM | //accept BC/MC/UC
- //RCR_AICV | RCR_ACRC32 | //accept ICV/CRC error packet
((u32)7<<RCR_MXDMA_OFFSET)| // Max DMA Burst Size per Rx DMA Burst, 7: unlimited.
(priv->EarlyRxThreshold<<RX_FIFO_THRESHOLD_SHIFT) | // Rx FIFO Threshold, 7: No Rx threshold.
- (priv->EarlyRxThreshold == 7 ? RCR_ONLYERLPKT:0);
+ (priv->EarlyRxThreshold == 7 ? RCR_ONLYERLPKT : 0);
priv->AcmControl = 0;
priv->pFirmware = kzalloc(sizeof(rt_firmware), GFP_KERNEL);
skb_queue_head_init(&priv->skb_queue);
/* Tx related queue */
- for (i = 0; i < MAX_QUEUE_SIZE; i++) {
- skb_queue_head_init(&priv->ieee80211->skb_waitQ [i]);
- }
- for (i = 0; i < MAX_QUEUE_SIZE; i++) {
- skb_queue_head_init(&priv->ieee80211->skb_aggQ [i]);
- }
- for (i = 0; i < MAX_QUEUE_SIZE; i++) {
- skb_queue_head_init(&priv->ieee80211->skb_drv_aggQ [i]);
- }
+ for (i = 0; i < MAX_QUEUE_SIZE; i++)
+ skb_queue_head_init(&priv->ieee80211->skb_waitQ[i]);
+ for (i = 0; i < MAX_QUEUE_SIZE; i++)
+ skb_queue_head_init(&priv->ieee80211->skb_aggQ[i]);
+ for (i = 0; i < MAX_QUEUE_SIZE; i++)
+ skb_queue_head_init(&priv->ieee80211->skb_drv_aggQ[i]);
priv->rf_set_chan = rtl8192_phy_SwChnl;
}
{
spin_lock_init(&priv->tx_lock);
spin_lock_init(&priv->irq_lock);//added by thomas
- //spin_lock_init(&priv->rf_lock);
sema_init(&priv->wx_sem, 1);
sema_init(&priv->rf_sem, 1);
mutex_init(&priv->mutex);
INIT_WORK(&priv->reset_wq, rtl8192_restart);
- //INIT_DELAYED_WORK(&priv->watch_dog_wq, hal_dm_watchdog);
INIT_DELAYED_WORK(&priv->watch_dog_wq, rtl819x_watchdog_wqcallback);
INIT_DELAYED_WORK(&priv->txpower_tracking_wq, dm_txpower_trackingcallback);
-// INIT_DELAYED_WORK(&priv->gpio_change_rf_wq, dm_gpio_change_rf_callback);
INIT_DELAYED_WORK(&priv->rfpath_check_wq, dm_rf_pathcheck_workitemcallback);
INIT_DELAYED_WORK(&priv->update_beacon_wq, rtl8192_update_beacon);
INIT_DELAYED_WORK(&priv->initialgain_operate_wq, InitialGainOperateWorkItemCallBack);
- //INIT_WORK(&priv->SwChnlWorkItem, rtl8192_SwChnl_WorkItem);
- //INIT_WORK(&priv->SetBWModeWorkItem, rtl8192_SetBWModeWorkItem);
INIT_WORK(&priv->qos_activate, rtl8192_qos_activate);
tasklet_init(&priv->irq_rx_tasklet,
- (void(*)(unsigned long))rtl8192_irq_rx_tasklet,
- (unsigned long)priv);
+ (void(*)(unsigned long))rtl8192_irq_rx_tasklet,
+ (unsigned long)priv);
}
static void rtl8192_get_eeprom_size(struct net_device *dev)
u16 curCR = 0;
struct r8192_priv *priv = ieee80211_priv(dev);
RT_TRACE(COMP_EPROM, "===========>%s()\n", __func__);
- curCR = read_nic_word_E(dev, EPROM_CMD);
+ read_nic_word_E(dev, EPROM_CMD, &curCR);
RT_TRACE(COMP_EPROM, "read from Reg EPROM_CMD(%x):%x\n", EPROM_CMD, curCR);
//whether need I consider BIT5?
priv->epromtype = (curCR & Cmd9346CR_9356SEL) ? EPROM_93c56 : EPROM_93c46;
u8 bLoad_From_EEPOM = false;
struct r8192_priv *priv = ieee80211_priv(dev);
u16 tmpValue = 0;
+ int i;
RT_TRACE(COMP_EPROM, "===========>%s()\n", __func__);
wEPROM_ID = eprom_read(dev, 0); //first read EEPROM ID out;
RT_TRACE(COMP_EPROM, "EEPROM ID is 0x%x\n", wEPROM_ID);
- if (wEPROM_ID != RTL8190_EEPROM_ID)
- {
+ if (wEPROM_ID != RTL8190_EEPROM_ID) {
RT_TRACE(COMP_ERR, "EEPROM ID is invalid(is 0x%x(should be 0x%x)\n", wEPROM_ID, RTL8190_EEPROM_ID);
- }
- else
+ } else {
bLoad_From_EEPOM = true;
+ }
- if (bLoad_From_EEPOM)
- {
+ if (bLoad_From_EEPOM) {
tmpValue = eprom_read(dev, (EEPROM_VID>>1));
priv->eeprom_vid = endian_swap(&tmpValue);
priv->eeprom_pid = eprom_read(dev, (EEPROM_PID>>1));
priv->eeprom_ChannelPlan = ((tmpValue&0xff00)>>8);
priv->btxpowerdata_readfromEEPORM = true;
priv->eeprom_CustomerID = eprom_read(dev, (EEPROM_Customer_ID>>1)) >>8;
- }
- else
- {
+ } else {
priv->eeprom_vid = 0;
priv->eeprom_pid = 0;
priv->card_8192_version = VERSION_819xU_B;
RT_TRACE(COMP_EPROM, "vid:0x%4x, pid:0x%4x, CustomID:0x%2x, ChanPlan:0x%x\n", priv->eeprom_vid, priv->eeprom_pid, priv->eeprom_CustomerID, priv->eeprom_ChannelPlan);
//set channelplan from eeprom
priv->ChannelPlan = priv->eeprom_ChannelPlan;
- if (bLoad_From_EEPOM)
- {
+ if (bLoad_From_EEPOM) {
int i;
- for (i = 0; i < 6; i += 2)
- {
+ for (i = 0; i < 6; i += 2) {
u16 tmp = 0;
tmp = eprom_read(dev, (u16)((EEPROM_NODE_ADDRESS_BYTE_0 + i)>>1));
*(u16 *)(&dev->dev_addr[i]) = tmp;
}
- }
- else
- {
+ } else {
memcpy(dev->dev_addr, bMac_Tmp_Addr, 6);
//should I set IDR0 here?
}
priv->rf_type = RTL819X_DEFAULT_RF_TYPE; //default 1T2R
priv->rf_chip = RF_8256;
- if (priv->card_8192_version == (u8)VERSION_819xU_A)
- {
+ if (priv->card_8192_version == (u8)VERSION_819xU_A) {
//read Tx power gain offset of legacy OFDM to HT rate
if (bLoad_From_EEPOM)
priv->EEPROMTxPowerDiff = (eprom_read(dev, (EEPROM_TxPowerDiff>>1))&0xff00) >> 8;
else
priv->EEPROM_Def_Ver = 1;
RT_TRACE(COMP_EPROM, "EEPROM_DEF_VER:%d\n", priv->EEPROM_Def_Ver);
- if (priv->EEPROM_Def_Ver == 0) //old eeprom definition
- {
+ if (priv->EEPROM_Def_Ver == 0) { //old eeprom definition
int i;
if (bLoad_From_EEPOM)
priv->EEPROMTxPowerLevelCCK = (eprom_read(dev, (EEPROM_TxPwIndex_CCK>>1))&0xff) >> 8;
else
priv->EEPROMTxPowerLevelCCK = 0x10;
RT_TRACE(COMP_EPROM, "CCK Tx Power Levl: 0x%02x\n", priv->EEPROMTxPowerLevelCCK);
- for (i = 0; i < 3; i++)
- {
- if (bLoad_From_EEPOM)
- {
+ for (i = 0; i < 3; i++) {
+ if (bLoad_From_EEPOM) {
tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G+i)>>1);
if (((EEPROM_TxPwIndex_OFDM_24G+i) % 2) == 0)
tmpValue = tmpValue & 0x00ff;
else
tmpValue = (tmpValue & 0xff00) >> 8;
- }
- else
+ } else {
tmpValue = 0x10;
+ }
priv->EEPROMTxPowerLevelOFDM24G[i] = (u8) tmpValue;
RT_TRACE(COMP_EPROM, "OFDM 2.4G Tx Power Level, Index %d = 0x%02x\n", i, priv->EEPROMTxPowerLevelCCK);
}
- }//end if EEPROM_DEF_VER == 0
- else if (priv->EEPROM_Def_Ver == 1)
- {
- if (bLoad_From_EEPOM)
- {
+ } else if (priv->EEPROM_Def_Ver == 1) {
+ if (bLoad_From_EEPOM) {
tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_CCK_V1>>1));
tmpValue = (tmpValue & 0xff00) >> 8;
- }
- else
+ } else {
tmpValue = 0x10;
+ }
priv->EEPROMTxPowerLevelCCK_V1[0] = (u8)tmpValue;
if (bLoad_From_EEPOM)
//update HAL variables
//
- {
- int i;
- for (i = 0; i < 14; i++)
- {
+ for (i = 0; i < 14; i++) {
+ if (i <= 3)
+ priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[0];
+ else if (i >= 4 && i <= 9)
+ priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[1];
+ else
+ priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[2];
+ }
+
+ for (i = 0; i < 14; i++) {
+ if (priv->EEPROM_Def_Ver == 0) {
if (i <= 3)
- priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[0];
+ priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelOFDM24G[0] + (priv->EEPROMTxPowerLevelCCK - priv->EEPROMTxPowerLevelOFDM24G[1]);
else if (i >= 4 && i <= 9)
- priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[1];
+ priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK;
else
- priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[2];
- }
-
- for (i = 0; i < 14; i++)
- {
- if (priv->EEPROM_Def_Ver == 0)
- {
- if (i <= 3)
- priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelOFDM24G[0] + (priv->EEPROMTxPowerLevelCCK - priv->EEPROMTxPowerLevelOFDM24G[1]);
- else if (i >= 4 && i <= 9)
- priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK;
- else
- priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelOFDM24G[2] + (priv->EEPROMTxPowerLevelCCK - priv->EEPROMTxPowerLevelOFDM24G[1]);
- }
- else if (priv->EEPROM_Def_Ver == 1)
- {
- if (i <= 3)
- priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[0];
- else if (i >= 4 && i <= 9)
- priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[1];
- else
- priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[2];
- }
+ priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelOFDM24G[2] + (priv->EEPROMTxPowerLevelCCK - priv->EEPROMTxPowerLevelOFDM24G[1]);
+ } else if (priv->EEPROM_Def_Ver == 1) {
+ if (i <= 3)
+ priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[0];
+ else if (i >= 4 && i <= 9)
+ priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[1];
+ else
+ priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[2];
}
- }//end update HAL variables
+ }
priv->TxPowerDiff = priv->EEPROMPwDiff;
-// Antenna B gain offset to antenna A, bit0~3
+ // Antenna B gain offset to antenna A, bit0~3
priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf);
// Antenna C gain offset to antenna A, bit4~7
priv->AntennaTxPwDiff[1] = ((priv->EEPROMTxPowerDiff & 0xf0)>>4);
priv->ThermalMeter[0] = priv->EEPROMThermalMeter;
}//end if VersionID == VERSION_819xU_A
-//added by vivi, for dlink led, 20080416
- switch (priv->eeprom_CustomerID)
- {
- case EEPROM_CID_RUNTOP:
- priv->CustomerID = RT_CID_819x_RUNTOP;
- break;
+ //added by vivi, for dlink led, 20080416
+ switch (priv->eeprom_CustomerID) {
+ case EEPROM_CID_RUNTOP:
+ priv->CustomerID = RT_CID_819x_RUNTOP;
+ break;
- case EEPROM_CID_DLINK:
- priv->CustomerID = RT_CID_DLINK;
- break;
+ case EEPROM_CID_DLINK:
+ priv->CustomerID = RT_CID_DLINK;
+ break;
- default:
- priv->CustomerID = RT_CID_DEFAULT;
- break;
+ default:
+ priv->CustomerID = RT_CID_DEFAULT;
+ break;
}
- switch (priv->CustomerID)
- {
- case RT_CID_819x_RUNTOP:
- priv->LedStrategy = SW_LED_MODE2;
- break;
+ switch (priv->CustomerID) {
+ case RT_CID_819x_RUNTOP:
+ priv->LedStrategy = SW_LED_MODE2;
+ break;
- case RT_CID_DLINK:
- priv->LedStrategy = SW_LED_MODE4;
- break;
+ case RT_CID_DLINK:
+ priv->LedStrategy = SW_LED_MODE4;
+ break;
- default:
- priv->LedStrategy = SW_LED_MODE0;
- break;
+ default:
+ priv->LedStrategy = SW_LED_MODE0;
+ break;
}
- if (priv->rf_type == RF_1T2R)
- {
+ if (priv->rf_type == RF_1T2R) {
RT_TRACE(COMP_EPROM, "\n1T2R config\n");
- }
- else
- {
+ } else {
RT_TRACE(COMP_EPROM, "\n2T4R config\n");
}
short rtl8192_get_channel_map(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- if (priv->ChannelPlan > COUNTRY_CODE_GLOBAL_DOMAIN){
- printk("rtl8180_init:Error channel plan! Set to default.\n");
+ if (priv->ChannelPlan > COUNTRY_CODE_GLOBAL_DOMAIN) {
+ netdev_err(dev, "rtl8180_init: Error channel plan! Set to default.\n");
priv->ChannelPlan = 0;
}
RT_TRACE(COMP_INIT, "Channel plan is %d\n", priv->ChannelPlan);
int i = 0;
u8 queuetopipe[] = {3, 2, 1, 0, 4, 8, 7, 6, 5};
memcpy(priv->txqueue_to_outpipemap, queuetopipe, 9);
-/* for(i=0;i<9;i++)
- printk("%d ",priv->txqueue_to_outpipemap[i]);
- printk("\n");*/
}
#else
{
u8 queuetopipe[] = {3, 2, 1, 0, 4, 4, 0, 4, 4};
memcpy(priv->txqueue_to_outpipemap, queuetopipe, 9);
-/* for(i=0;i<9;i++)
- printk("%d ",priv->txqueue_to_outpipemap[i]);
- printk("\n");*/
}
#endif
rtl8192_init_priv_variable(dev);
init_timer(&priv->watch_dog_timer);
priv->watch_dog_timer.data = (unsigned long)dev;
priv->watch_dog_timer.function = watch_dog_timer_callback;
- if (rtl8192_usb_initendpoints(dev) != 0){
+ if (rtl8192_usb_initendpoints(dev) != 0) {
DMESG("Endopoints initialization failed");
return -ENOMEM;
}
- //rtl8192_adapter_start(dev);
#ifdef DEBUG_EPROM
dump_eprom(dev);
#endif
u32 regRATR = 0, regRRSR = 0;
u8 regBwOpMode = 0, regTmp = 0;
struct r8192_priv *priv = ieee80211_priv(dev);
+ u32 ratr_value = 0;
-// Set RRSR, RATR, and BW_OPMODE registers
+ // Set RRSR, RATR, and BW_OPMODE registers
//
- switch (priv->ieee80211->mode)
- {
+ switch (priv->ieee80211->mode) {
case WIRELESS_MODE_B:
regBwOpMode = BW_OPMODE_20MHZ;
regRATR = RATE_ALL_CCK;
break;
case WIRELESS_MODE_AUTO:
#ifdef TO_DO_LIST
- if (Adapter->bInHctTest)
- {
- regBwOpMode = BW_OPMODE_20MHZ;
- regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
- regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+ if (Adapter->bInHctTest) {
+ regBwOpMode = BW_OPMODE_20MHZ;
+ regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+ regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
}
else
#endif
{
- regBwOpMode = BW_OPMODE_20MHZ;
- regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
- regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+ regBwOpMode = BW_OPMODE_20MHZ;
+ regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
+ regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
}
break;
case WIRELESS_MODE_N_24G:
// It support CCK rate by default.
// CCK rate will be filtered out only when associated AP does not support it.
regBwOpMode = BW_OPMODE_20MHZ;
- regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
- regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+ regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
+ regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
break;
case WIRELESS_MODE_N_5G:
regBwOpMode = BW_OPMODE_5G;
}
write_nic_byte(dev, BW_OPMODE, regBwOpMode);
- {
- u32 ratr_value = 0;
- ratr_value = regRATR;
- if (priv->rf_type == RF_1T2R)
- {
- ratr_value &= ~(RATE_ALL_OFDM_2SS);
- }
- write_nic_dword(dev, RATR0, ratr_value);
- write_nic_byte(dev, UFWP, 1);
- }
- regTmp = read_nic_byte(dev, 0x313);
+ ratr_value = regRATR;
+ if (priv->rf_type == RF_1T2R)
+ ratr_value &= ~(RATE_ALL_OFDM_2SS);
+ write_nic_dword(dev, RATR0, ratr_value);
+ write_nic_byte(dev, UFWP, 1);
+ read_nic_byte(dev, 0x313, ®Tmp);
regRRSR = ((regTmp) << 24) | (regRRSR & 0x00ffffff);
write_nic_dword(dev, RRSR, regRRSR);
// Set Retry Limit here
//
write_nic_word(dev, RETRY_LIMIT,
- priv->ShortRetryLimit << RETRY_LIMIT_SHORT_SHIFT | \
- priv->LongRetryLimit << RETRY_LIMIT_LONG_SHIFT);
+ priv->ShortRetryLimit << RETRY_LIMIT_SHORT_SHIFT |
+ priv->LongRetryLimit << RETRY_LIMIT_LONG_SHIFT);
// Set Contention Window here
// Set Tx AGC
struct r8192_priv *priv = ieee80211_priv(dev);
u32 dwRegRead = 0;
bool init_status = true;
+ u8 SECR_value = 0x0;
+ u8 tmp;
RT_TRACE(COMP_INIT, "====>%s()\n", __func__);
priv->Rf_Mode = RF_OP_By_SW_3wire;
//for ASIC power on sequence
write_nic_byte_E(dev, 0x5e, 0x80);
write_nic_byte(dev, 0x17, 0x37);
mdelay(10);
-//#ifdef TO_DO_LIST
priv->pFirmware->firmware_status = FW_STATUS_0_INIT;
//config CPUReset Register
//Firmware Reset or not?
- dwRegRead = read_nic_dword(dev, CPU_GEN);
+ read_nic_dword(dev, CPU_GEN, &dwRegRead);
if (priv->pFirmware->firmware_status == FW_STATUS_0_INIT)
dwRegRead |= CPU_GEN_SYSTEM_RESET; //do nothing here?
else if (priv->pFirmware->firmware_status == FW_STATUS_5_READY)
RT_TRACE(COMP_ERR, "ERROR in %s(): undefined firmware state(%d)\n", __func__, priv->pFirmware->firmware_status);
write_nic_dword(dev, CPU_GEN, dwRegRead);
- //mdelay(30);
//config BB.
rtl8192_BBConfig(dev);
//Loopback mode or not
priv->LoopbackMode = RTL819xU_NO_LOOPBACK;
-// priv->LoopbackMode = RTL819xU_MAC_LOOPBACK;
- dwRegRead = read_nic_dword(dev, CPU_GEN);
+ read_nic_dword(dev, CPU_GEN, &dwRegRead);
if (priv->LoopbackMode == RTL819xU_NO_LOOPBACK)
dwRegRead = ((dwRegRead & CPU_GEN_NO_LOOPBACK_MSK) | CPU_GEN_NO_LOOPBACK_SET);
else if (priv->LoopbackMode == RTL819xU_MAC_LOOPBACK)
udelay(500);
//xiong add for new bitfile:usb suspend reset pin set to 1. //do we need?
- write_nic_byte_E(dev, 0x5f, (read_nic_byte_E(dev, 0x5f)|0x20));
+ read_nic_byte_E(dev, 0x5f, &tmp);
+ write_nic_byte_E(dev, 0x5f, tmp|0x20);
//Set Hardware
rtl8192_hwconfig(dev);
write_nic_dword(dev, RCR, priv->ReceiveConfig);
//Initialize Number of Reserved Pages in Firmware Queue
- write_nic_dword(dev, RQPN1, NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT |\
- NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT | \
- NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT | \
- NUM_OF_PAGE_IN_FW_QUEUE_VO <<RSVD_FW_QUEUE_PAGE_VO_SHIFT);
- write_nic_dword(dev, RQPN2, NUM_OF_PAGE_IN_FW_QUEUE_MGNT << RSVD_FW_QUEUE_PAGE_MGNT_SHIFT |\
- NUM_OF_PAGE_IN_FW_QUEUE_CMD << RSVD_FW_QUEUE_PAGE_CMD_SHIFT);
- write_nic_dword(dev, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW| \
- NUM_OF_PAGE_IN_FW_QUEUE_BCN<<RSVD_FW_QUEUE_PAGE_BCN_SHIFT
-// | NUM_OF_PAGE_IN_FW_QUEUE_PUB<<RSVD_FW_QUEUE_PAGE_PUB_SHIFT
- );
+ write_nic_dword(dev, RQPN1, NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT |
+ NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT |
+ NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT |
+ NUM_OF_PAGE_IN_FW_QUEUE_VO <<RSVD_FW_QUEUE_PAGE_VO_SHIFT);
+ write_nic_dword(dev, RQPN2, NUM_OF_PAGE_IN_FW_QUEUE_MGNT << RSVD_FW_QUEUE_PAGE_MGNT_SHIFT |
+ NUM_OF_PAGE_IN_FW_QUEUE_CMD << RSVD_FW_QUEUE_PAGE_CMD_SHIFT);
+ write_nic_dword(dev, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW|
+ NUM_OF_PAGE_IN_FW_QUEUE_BCN<<RSVD_FW_QUEUE_PAGE_BCN_SHIFT);
write_nic_dword(dev, RATR0+4*7, (RATE_ALL_OFDM_AG | RATE_ALL_CCK));
//Set AckTimeout
// TODO: (it value is only for FPGA version). need to be changed!!2006.12.18, by Emily
write_nic_byte(dev, ACK_TIMEOUT, 0x30);
-// RT_TRACE(COMP_INIT, "%s():priv->ResetProgress is %d\n", __FUNCTION__,priv->ResetProgress);
if (priv->ResetProgress == RESET_TYPE_NORESET)
- rtl8192_SetWirelessMode(dev, priv->ieee80211->mode);
- if (priv->ResetProgress == RESET_TYPE_NORESET){
- CamResetAllEntry(dev);
- {
- u8 SECR_value = 0x0;
+ rtl8192_SetWirelessMode(dev, priv->ieee80211->mode);
+ if (priv->ResetProgress == RESET_TYPE_NORESET) {
+ CamResetAllEntry(dev);
SECR_value |= SCR_TxEncEnable;
SECR_value |= SCR_RxDecEnable;
SECR_value |= SCR_NoSKMC;
write_nic_byte(dev, SECR, SECR_value);
}
- }
//Beacon related
write_nic_word(dev, ATIMWND, 2);
write_nic_word(dev, BCN_INTERVAL, 100);
- {
#define DEFAULT_EDCA 0x005e4332
+ {
int i;
for (i = 0; i < QOS_QUEUE_NUM; i++)
- write_nic_dword(dev, WDCAPARA_ADD[i], DEFAULT_EDCA);
+ write_nic_dword(dev, WDCAPARA_ADD[i], DEFAULT_EDCA);
}
#ifdef USB_RX_AGGREGATION_SUPPORT
//3 For usb rx firmware aggregation control
- if (priv->ResetProgress == RESET_TYPE_NORESET)
- {
+ if (priv->ResetProgress == RESET_TYPE_NORESET) {
u32 ulValue;
PRT_HIGH_THROUGHPUT pHTInfo = priv->ieee80211->pHTInfo;
ulValue = (pHTInfo->UsbRxFwAggrEn<<24) | (pHTInfo->UsbRxFwAggrPageNum<<16) |
- (pHTInfo->UsbRxFwAggrPacketNum<<8) | (pHTInfo->UsbRxFwAggrTimeout);
+ (pHTInfo->UsbRxFwAggrPacketNum<<8) | (pHTInfo->UsbRxFwAggrTimeout);
/*
* If usb rx firmware aggregation is enabled,
* when anyone of three threshold conditions above is reached,
rtl8192_phy_configmac(dev);
- if (priv->card_8192_version == (u8) VERSION_819xU_A)
- {
+ if (priv->card_8192_version == (u8) VERSION_819xU_A) {
rtl8192_phy_getTxPower(dev);
rtl8192_phy_setTxPower(dev, priv->chan);
}
//Firmware download
init_status = init_firmware(dev);
- if (!init_status)
- {
+ if (!init_status) {
RT_TRACE(COMP_ERR, "ERR!!! %s(): Firmware download is failed\n", __func__);
return init_status;
}
RT_TRACE(COMP_INIT, "%s():after firmware download\n", __func__);
//
#ifdef TO_DO_LIST
-if (Adapter->ResetProgress == RESET_TYPE_NORESET)
- {
- if (pMgntInfo->RegRfOff == TRUE)
- { // User disable RF via registry.
+ if (Adapter->ResetProgress == RESET_TYPE_NORESET) {
+ if (pMgntInfo->RegRfOff == TRUE) { // User disable RF via registry.
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
// Those actions will be discard in MgntActSet_RF_State because of the same state
for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
- }
- else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS)
- { // H/W or S/W RF OFF before sleep.
+ } else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) { // H/W or S/W RF OFF before sleep.
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RfOffReason(%d) ----------\n", pMgntInfo->RfOffReason));
MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
- }
- else
- {
+ } else {
pHalData->eRFPowerState = eRfOn;
pMgntInfo->RfOffReason = 0;
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): RF is on ----------\n"));
}
- }
- else
- {
- if (pHalData->eRFPowerState == eRfOff)
- {
+ } else {
+ if (pHalData->eRFPowerState == eRfOff) {
MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
// Those actions will be discard in MgntActSet_RF_State because of the same state
for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
}
#endif
//config RF.
- if (priv->ResetProgress == RESET_TYPE_NORESET){
- rtl8192_phy_RFConfig(dev);
- RT_TRACE(COMP_INIT, "%s():after phy RF config\n", __func__);
+ if (priv->ResetProgress == RESET_TYPE_NORESET) {
+ rtl8192_phy_RFConfig(dev);
+ RT_TRACE(COMP_INIT, "%s():after phy RF config\n", __func__);
}
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn, 0x1);
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bOFDMEn, 0x1);
- if (priv->ResetProgress == RESET_TYPE_NORESET)
- {
+ if (priv->ResetProgress == RESET_TYPE_NORESET) {
//if D or C cut
- u8 tmpvalue = read_nic_byte(dev, 0x301);
- if (tmpvalue == 0x03)
- {
+ u8 tmpvalue;
+ read_nic_byte(dev, 0x301, &tmpvalue);
+ if (tmpvalue == 0x03) {
priv->bDcut = TRUE;
RT_TRACE(COMP_POWER_TRACKING, "D-cut\n");
- }
- else
- {
+ } else {
priv->bDcut = FALSE;
RT_TRACE(COMP_POWER_TRACKING, "C-cut\n");
}
dm_initialize_txpower_tracking(dev);
- if (priv->bDcut == TRUE)
- {
+ if (priv->bDcut == TRUE) {
u32 i, TempCCk;
u32 tmpRegA = rtl8192_QueryBBReg(dev, rOFDM0_XATxIQImbalance, bMaskDWord);
- // u32 tmpRegC= rtl8192_QueryBBReg(dev,rOFDM0_XCTxIQImbalance,bMaskDWord);
- for (i = 0; i < TxBBGainTableLength; i++)
- {
- if (tmpRegA == priv->txbbgain_table[i].txbbgain_value)
- {
+ for (i = 0; i < TxBBGainTableLength; i++) {
+ if (tmpRegA == priv->txbbgain_table[i].txbbgain_value) {
priv->rfa_txpowertrackingindex = (u8)i;
priv->rfa_txpowertrackingindex_real = (u8)i;
priv->rfa_txpowertracking_default = priv->rfa_txpowertrackingindex;
TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2);
- for (i = 0; i < CCKTxBBGainTableLength; i++)
- {
+ for (i = 0; i < CCKTxBBGainTableLength; i++) {
- if (TempCCk == priv->cck_txbbgain_table[i].ccktxbb_valuearray[0])
- {
+ if (TempCCk == priv->cck_txbbgain_table[i].ccktxbb_valuearray[0]) {
priv->cck_present_attentuation_20Mdefault = (u8) i;
break;
}
priv->cck_present_attentuation_difference = 0;
priv->cck_present_attentuation = priv->cck_present_attentuation_20Mdefault;
- // pMgntInfo->bTXPowerTracking = FALSE;//TEMPLY DISABLE
}
}
write_nic_byte(dev, 0x87, 0x0);
return &priv->ieee80211->stats;
}
-bool
-HalTxCheckStuck819xUsb(
- struct net_device *dev
- )
+bool HalTxCheckStuck819xUsb(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- u16 RegTxCounter = read_nic_word(dev, 0x128);
+ u16 RegTxCounter;
bool bStuck = FALSE;
+ read_nic_word(dev, 0x128, &RegTxCounter);
RT_TRACE(COMP_RESET, "%s():RegTxCounter is %d,TxCounter is %d\n", __func__, RegTxCounter, priv->TxCounter);
if (priv->TxCounter == RegTxCounter)
bStuck = TRUE;
* <Assumption: RT_TX_SPINLOCK is acquired.>
* First added: 2006.11.19 by emily
*/
-RESET_TYPE
-TxCheckStuck(struct net_device *dev)
+RESET_TYPE TxCheckStuck(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 QueueID;
-// PRT_TCB pTcb;
-// u8 ResetThreshold;
bool bCheckFwTxCnt = false;
- //unsigned long flags;
//
// Decide such threshold according to current power save mode
//
-// RT_TRACE(COMP_RESET, " ==> TxCheckStuck()\n");
-// PlatformAcquireSpinLock(Adapter, RT_TX_SPINLOCK);
-// spin_lock_irqsave(&priv->ieee80211->lock,flags);
- for (QueueID = 0; QueueID <= BEACON_QUEUE; QueueID ++)
- {
- if (QueueID == TXCMD_QUEUE)
- continue;
+ for (QueueID = 0; QueueID <= BEACON_QUEUE; QueueID++) {
+ if (QueueID == TXCMD_QUEUE)
+ continue;
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- if ((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_drv_aggQ[QueueID]) == 0))
+ if ((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_drv_aggQ[QueueID]) == 0))
#else
- if ((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0))
+ if ((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0))
#endif
continue;
- bCheckFwTxCnt = true;
- }
-// PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK);
-// spin_unlock_irqrestore(&priv->ieee80211->lock,flags);
-// RT_TRACE(COMP_RESET,"bCheckFwTxCnt is %d\n",bCheckFwTxCnt);
- if (bCheckFwTxCnt)
- {
- if (HalTxCheckStuck819xUsb(dev))
- {
+ bCheckFwTxCnt = true;
+ }
+ if (bCheckFwTxCnt) {
+ if (HalTxCheckStuck819xUsb(dev)) {
RT_TRACE(COMP_RESET, "TxCheckStuck(): Fw indicates no Tx condition! \n");
return RESET_TYPE_SILENT;
}
return RESET_TYPE_NORESET;
}
-bool
-HalRxCheckStuck819xUsb(struct net_device *dev)
+bool HalRxCheckStuck819xUsb(struct net_device *dev)
{
- u16 RegRxCounter = read_nic_word(dev, 0x130);
+ u16 RegRxCounter;
struct r8192_priv *priv = ieee80211_priv(dev);
bool bStuck = FALSE;
static u8 rx_chk_cnt;
+ read_nic_word(dev, 0x130, &RegRxCounter);
RT_TRACE(COMP_RESET, "%s(): RegRxCounter is %d,RxCounter is %d\n", __func__, RegRxCounter, priv->RxCounter);
// If rssi is small, we should check rx for long time because of bad rx.
// or maybe it will continuous silent reset every 2 seconds.
rx_chk_cnt++;
- if (priv->undecorated_smoothed_pwdb >= (RateAdaptiveTH_High+5))
- {
+ if (priv->undecorated_smoothed_pwdb >= (RateAdaptiveTH_High+5)) {
rx_chk_cnt = 0; //high rssi, check rx stuck right now.
- }
- else if (priv->undecorated_smoothed_pwdb < (RateAdaptiveTH_High+5) &&
- ((priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb >= RateAdaptiveTH_Low_40M) ||
- (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb >= RateAdaptiveTH_Low_20M)))
- {
+ } else if (priv->undecorated_smoothed_pwdb < (RateAdaptiveTH_High+5) &&
+ ((priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20 && priv->undecorated_smoothed_pwdb >= RateAdaptiveTH_Low_40M) ||
+ (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 && priv->undecorated_smoothed_pwdb >= RateAdaptiveTH_Low_20M))) {
if (rx_chk_cnt < 2)
- {
return bStuck;
- }
else
- {
rx_chk_cnt = 0;
- }
- }
- else if (((priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb < RateAdaptiveTH_Low_40M) ||
- (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb < RateAdaptiveTH_Low_20M)) &&
- priv->undecorated_smoothed_pwdb >= VeryLowRSSI)
- {
+ } else if (((priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20 && priv->undecorated_smoothed_pwdb < RateAdaptiveTH_Low_40M) ||
+ (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 && priv->undecorated_smoothed_pwdb < RateAdaptiveTH_Low_20M)) &&
+ priv->undecorated_smoothed_pwdb >= VeryLowRSSI) {
if (rx_chk_cnt < 4)
- {
- //DbgPrint("RSSI < %d && RSSI >= %d, no check this time \n", RateAdaptiveTH_Low, VeryLowRSSI);
return bStuck;
- }
else
- {
rx_chk_cnt = 0;
- //DbgPrint("RSSI < %d && RSSI >= %d, check this time \n", RateAdaptiveTH_Low, VeryLowRSSI);
- }
- }
- else
- {
+ } else {
if (rx_chk_cnt < 8)
- {
- //DbgPrint("RSSI <= %d, no check this time \n", VeryLowRSSI);
return bStuck;
- }
else
- {
rx_chk_cnt = 0;
- //DbgPrint("RSSI <= %d, check this time \n", VeryLowRSSI);
- }
}
if (priv->RxCounter == RegRxCounter)
return bStuck;
}
-RESET_TYPE
-RxCheckStuck(struct net_device *dev)
+RESET_TYPE RxCheckStuck(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- //int i;
bool bRxCheck = FALSE;
-// RT_TRACE(COMP_RESET," ==> RxCheckStuck()\n");
- //PlatformAcquireSpinLock(Adapter, RT_RX_SPINLOCK);
-
- if (priv->IrpPendingCount > 1)
+ if (priv->IrpPendingCount > 1)
bRxCheck = TRUE;
- //PlatformReleaseSpinLock(Adapter, RT_RX_SPINLOCK);
-// RT_TRACE(COMP_RESET,"bRxCheck is %d \n",bRxCheck);
- if (bRxCheck)
- {
- if (HalRxCheckStuck819xUsb(dev))
- {
+ if (bRxCheck) {
+ if (HalRxCheckStuck819xUsb(dev)) {
RT_TRACE(COMP_RESET, "RxStuck Condition\n");
return RESET_TYPE_SILENT;
}
*
* 8185 and 8185b does not implement this function. This is added by Emily at 2006.11.24
*/
-RESET_TYPE
-rtl819x_ifcheck_resetornot(struct net_device *dev)
+RESET_TYPE rtl819x_ifcheck_resetornot(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
RESET_TYPE TxResetType = RESET_TYPE_NORESET;
TxResetType = TxCheckStuck(dev);
if (rfState != eRfOff ||
- /*ADAPTER_TEST_STATUS_FLAG(Adapter, ADAPTER_STATUS_FW_DOWNLOAD_FAILURE)) &&*/
- (priv->ieee80211->iw_mode != IW_MODE_ADHOC))
- {
+ (priv->ieee80211->iw_mode != IW_MODE_ADHOC)) {
// If driver is in the status of firmware download failure , driver skips RF initialization and RF is
// in turned off state. Driver should check whether Rx stuck and do silent reset. And
// if driver is in firmware download failure status, driver should initialize RF in the following
// set, STA cannot hear any packet at all. Emily, 2008.04.12
RxResetType = RxCheckStuck(dev);
}
- if (TxResetType == RESET_TYPE_NORMAL || RxResetType == RESET_TYPE_NORMAL)
+ if (TxResetType == RESET_TYPE_NORMAL || RxResetType == RESET_TYPE_NORMAL) {
return RESET_TYPE_NORMAL;
- else if (TxResetType == RESET_TYPE_SILENT || RxResetType == RESET_TYPE_SILENT){
+ } else if (TxResetType == RESET_TYPE_SILENT || RxResetType == RESET_TYPE_SILENT) {
RT_TRACE(COMP_RESET, "%s():silent reset\n", __func__);
return RESET_TYPE_SILENT;
- }
- else
+ } else {
return RESET_TYPE_NORESET;
+ }
}
-void
-CamRestoreAllEntry(struct net_device *dev)
+void CamRestoreAllEntry(struct net_device *dev)
{
u8 EntryId = 0;
struct r8192_priv *priv = ieee80211_priv(dev);
{0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
{0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
{0x00, 0x00, 0x00, 0x00, 0x00, 0x03} };
- static u8 CAM_CONST_BROAD[] =
- {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+ static u8 CAM_CONST_BROAD[] = {
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
RT_TRACE(COMP_SEC, "CamRestoreAllEntry: \n");
- if ((priv->ieee80211->pairwise_key_type == KEY_TYPE_WEP40)||
- (priv->ieee80211->pairwise_key_type == KEY_TYPE_WEP104))
- {
+ if ((priv->ieee80211->pairwise_key_type == KEY_TYPE_WEP40) ||
+ (priv->ieee80211->pairwise_key_type == KEY_TYPE_WEP104)) {
- for (EntryId = 0; EntryId < 4; EntryId++)
- {
- {
- MacAddr = CAM_CONST_ADDR[EntryId];
- setKey(dev,
- EntryId,
- EntryId,
- priv->ieee80211->pairwise_key_type,
- MacAddr,
- 0,
- NULL);
- }
+ for (EntryId = 0; EntryId < 4; EntryId++) {
+ MacAddr = CAM_CONST_ADDR[EntryId];
+ setKey(dev, EntryId, EntryId,
+ priv->ieee80211->pairwise_key_type,
+ MacAddr, 0, NULL);
}
- }
- else if (priv->ieee80211->pairwise_key_type == KEY_TYPE_TKIP)
- {
+ } else if (priv->ieee80211->pairwise_key_type == KEY_TYPE_TKIP) {
- {
- if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
- setKey(dev,
- 4,
- 0,
- priv->ieee80211->pairwise_key_type,
- (u8 *)dev->dev_addr,
- 0,
- NULL);
- else
- setKey(dev,
- 4,
- 0,
- priv->ieee80211->pairwise_key_type,
- MacAddr,
- 0,
- NULL);
- }
- }
- else if (priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP)
- {
+ if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
+ setKey(dev, 4, 0, priv->ieee80211->pairwise_key_type,
+ (u8 *)dev->dev_addr, 0, NULL);
+ else
+ setKey(dev, 4, 0, priv->ieee80211->pairwise_key_type,
+ MacAddr, 0, NULL);
+ } else if (priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP) {
- {
- if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
- setKey(dev,
- 4,
- 0,
- priv->ieee80211->pairwise_key_type,
- (u8 *)dev->dev_addr,
- 0,
- NULL);
- else
- setKey(dev,
- 4,
- 0,
- priv->ieee80211->pairwise_key_type,
- MacAddr,
- 0,
- NULL);
- }
+ if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
+ setKey(dev, 4, 0, priv->ieee80211->pairwise_key_type,
+ (u8 *)dev->dev_addr, 0, NULL);
+ else
+ setKey(dev, 4, 0, priv->ieee80211->pairwise_key_type,
+ MacAddr, 0, NULL);
}
- if (priv->ieee80211->group_key_type == KEY_TYPE_TKIP)
- {
+ if (priv->ieee80211->group_key_type == KEY_TYPE_TKIP) {
MacAddr = CAM_CONST_BROAD;
- for (EntryId = 1; EntryId < 4; EntryId++)
- {
- {
- setKey(dev,
- EntryId,
- EntryId,
- priv->ieee80211->group_key_type,
- MacAddr,
- 0,
- NULL);
- }
+ for (EntryId = 1; EntryId < 4; EntryId++) {
+ setKey(dev, EntryId, EntryId,
+ priv->ieee80211->group_key_type,
+ MacAddr, 0, NULL);
}
if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
- setKey(dev,
- 0,
- 0,
- priv->ieee80211->group_key_type,
- CAM_CONST_ADDR[0],
- 0,
- NULL);
- }
- else if (priv->ieee80211->group_key_type == KEY_TYPE_CCMP)
- {
+ setKey(dev, 0, 0, priv->ieee80211->group_key_type,
+ CAM_CONST_ADDR[0], 0, NULL);
+ } else if (priv->ieee80211->group_key_type == KEY_TYPE_CCMP) {
MacAddr = CAM_CONST_BROAD;
- for (EntryId = 1; EntryId < 4; EntryId++)
- {
- {
- setKey(dev,
- EntryId ,
- EntryId,
- priv->ieee80211->group_key_type,
- MacAddr,
- 0,
- NULL);
- }
+ for (EntryId = 1; EntryId < 4; EntryId++) {
+ setKey(dev, EntryId, EntryId,
+ priv->ieee80211->group_key_type,
+ MacAddr, 0, NULL);
}
if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
- setKey(dev,
- 0,
- 0,
- priv->ieee80211->group_key_type,
- CAM_CONST_ADDR[0],
- 0,
- NULL);
+ setKey(dev, 0, 0, priv->ieee80211->group_key_type,
+ CAM_CONST_ADDR[0], 0, NULL);
}
}
//////////////////////////////////////////////////////////////
// The method checking Tx/Rx stuck of this function is supported by FW,
// which reports Tx and Rx counter to register 0x128 and 0x130.
//////////////////////////////////////////////////////////////
-void
-rtl819x_ifsilentreset(struct net_device *dev)
+void rtl819x_ifsilentreset(struct net_device *dev)
{
- //OCTET_STRING asocpdu;
struct r8192_priv *priv = ieee80211_priv(dev);
u8 reset_times = 0;
int reset_status = 0;
// 2007.07.20. If we need to check CCK stop, please uncomment this line.
//bStuck = Adapter->HalFunc.CheckHWStopHandler(Adapter);
- if (priv->ResetProgress == RESET_TYPE_NORESET)
- {
+ if (priv->ResetProgress == RESET_TYPE_NORESET) {
RESET_START:
RT_TRACE(COMP_RESET, "=========>Reset progress!! \n");
// Set the variable for reset.
priv->ResetProgress = RESET_TYPE_SILENT;
-// rtl8192_close(dev);
down(&priv->wx_sem);
- if (priv->up == 0)
- {
+ if (priv->up == 0) {
RT_TRACE(COMP_ERR, "%s():the driver is not up! return\n", __func__);
up(&priv->wx_sem);
return;
}
priv->up = 0;
RT_TRACE(COMP_RESET, "%s():======>start to down the driver\n", __func__);
-// if(!netif_queue_stopped(dev))
-// netif_stop_queue(dev);
rtl8192_rtx_disable(dev);
rtl8192_cancel_deferred_work(priv);
del_timer_sync(&priv->watch_dog_timer);
ieee->sync_scan_hurryup = 1;
- if (ieee->state == IEEE80211_LINKED)
- {
+ if (ieee->state == IEEE80211_LINKED) {
down(&ieee->wx_sem);
- printk("ieee->state is IEEE80211_LINKED\n");
+ netdev_dbg(dev, "ieee->state is IEEE80211_LINKED\n");
ieee80211_stop_send_beacons(priv->ieee80211);
del_timer_sync(&ieee->associate_timer);
cancel_delayed_work(&ieee->associate_retry_wq);
ieee80211_stop_scan(ieee);
netif_carrier_off(dev);
up(&ieee->wx_sem);
+ } else {
+ netdev_dbg(dev, "ieee->state is NOT LINKED\n");
+ ieee80211_softmac_stop_protocol(priv->ieee80211);
}
- else{
- printk("ieee->state is NOT LINKED\n");
- ieee80211_softmac_stop_protocol(priv->ieee80211); }
up(&priv->wx_sem);
RT_TRACE(COMP_RESET, "%s():<==========down process is finished\n", __func__);
- //rtl8192_irq_disable(dev);
RT_TRACE(COMP_RESET, "%s():===========>start up the driver\n", __func__);
reset_status = _rtl8192_up(dev);
RT_TRACE(COMP_RESET, "%s():<===========up process is finished\n", __func__);
- if (reset_status == -EAGAIN)
- {
- if (reset_times < 3)
- {
+ if (reset_status == -EAGAIN) {
+ if (reset_times < 3) {
reset_times++;
goto RESET_START;
- }
- else
- {
+ } else {
RT_TRACE(COMP_ERR, " ERR!!! %s(): Reset Failed!!\n", __func__);
}
}
ieee->is_silent_reset = 1;
EnableHWSecurityConfig8192(dev);
- if (ieee->state == IEEE80211_LINKED && ieee->iw_mode == IW_MODE_INFRA)
- {
+ if (ieee->state == IEEE80211_LINKED && ieee->iw_mode == IW_MODE_INFRA) {
ieee->set_chan(ieee->dev, ieee->current_network.channel);
queue_work(ieee->wq, &ieee->associate_complete_wq);
- }
- else if (ieee->state == IEEE80211_LINKED && ieee->iw_mode == IW_MODE_ADHOC)
- {
+ } else if (ieee->state == IEEE80211_LINKED && ieee->iw_mode == IW_MODE_ADHOC) {
ieee->set_chan(ieee->dev, ieee->current_network.channel);
ieee->link_change(ieee->dev);
- // notify_wx_assoc_event(ieee);
-
ieee80211_start_send_beacons(ieee);
if (ieee->data_hard_resume)
}
}
-void CAM_read_entry(
- struct net_device *dev,
- u32 iIndex
-)
+void CAM_read_entry(struct net_device *dev, u32 iIndex)
{
u32 target_command = 0;
- u32 target_content = 0;
- u8 entry_i = 0;
- u32 ulStatus;
+ u32 target_content = 0;
+ u8 entry_i = 0;
+ u32 ulStatus;
s32 i = 100;
-// printk("=======>start read CAM\n");
- for (entry_i = 0; entry_i < CAM_CONTENT_COUNT; entry_i++)
- {
- // polling bit, and No Write enable, and address
+ for (entry_i = 0; entry_i < CAM_CONTENT_COUNT; entry_i++) {
+ // polling bit, and No Write enable, and address
target_command = entry_i+CAM_CONTENT_COUNT*iIndex;
target_command = target_command | BIT31;
- //Check polling bit is clear
-// mdelay(1);
- while ((i--) >= 0)
- {
- ulStatus = read_nic_dword(dev, RWCAM);
- if (ulStatus & BIT31){
+ //Check polling bit is clear
+ while ((i--) >= 0) {
+ read_nic_dword(dev, RWCAM, &ulStatus);
+ if (ulStatus & BIT31)
continue;
- }
- else{
+ else
break;
- }
}
write_nic_dword(dev, RWCAM, target_command);
RT_TRACE(COMP_SEC, "CAM_read_entry(): WRITE A0: %x \n", target_command);
- // printk("CAM_read_entry(): WRITE A0: %lx \n",target_command);
- target_content = read_nic_dword(dev, RCAMO);
+ read_nic_dword(dev, RCAMO, &target_content);
RT_TRACE(COMP_SEC, "CAM_read_entry(): WRITE A8: %x \n", target_content);
- // printk("CAM_read_entry(): WRITE A8: %lx \n",target_content);
}
printk("\n");
}
-void rtl819x_update_rxcounts(
- struct r8192_priv *priv,
- u32 *TotalRxBcnNum,
- u32 *TotalRxDataNum
-)
+void rtl819x_update_rxcounts(struct r8192_priv *priv, u32 *TotalRxBcnNum,
+ u32 *TotalRxDataNum)
{
u16 SlotIndex;
u8 i;
SlotIndex = (priv->ieee80211->LinkDetectInfo.SlotIndex++)%(priv->ieee80211->LinkDetectInfo.SlotNum);
priv->ieee80211->LinkDetectInfo.RxBcnNum[SlotIndex] = priv->ieee80211->LinkDetectInfo.NumRecvBcnInPeriod;
priv->ieee80211->LinkDetectInfo.RxDataNum[SlotIndex] = priv->ieee80211->LinkDetectInfo.NumRecvDataInPeriod;
- for (i = 0; i < priv->ieee80211->LinkDetectInfo.SlotNum; i++){
+ for (i = 0; i < priv->ieee80211->LinkDetectInfo.SlotNum; i++) {
*TotalRxBcnNum += priv->ieee80211->LinkDetectInfo.RxBcnNum[i];
*TotalRxDataNum += priv->ieee80211->LinkDetectInfo.RxDataNum[i];
}
}
-extern void rtl819x_watchdog_wqcallback(struct work_struct *work)
+extern void rtl819x_watchdog_wqcallback(struct work_struct *work)
{
struct delayed_work *dwork = container_of(work, struct delayed_work, work);
- struct r8192_priv *priv = container_of(dwork, struct r8192_priv, watch_dog_wq);
- struct net_device *dev = priv->ieee80211->dev;
+ struct r8192_priv *priv = container_of(dwork, struct r8192_priv, watch_dog_wq);
+ struct net_device *dev = priv->ieee80211->dev;
struct ieee80211_device *ieee = priv->ieee80211;
RESET_TYPE ResetType = RESET_TYPE_NORESET;
static u8 check_reset_cnt;
bool bBusyTraffic = false;
+ u32 TotalRxBcnNum = 0;
+ u32 TotalRxDataNum = 0;
if (!priv->up)
return;
hal_dm_watchdog(dev);
- {//to get busy traffic condition
- if (ieee->state == IEEE80211_LINKED)
- {
- if (ieee->LinkDetectInfo.NumRxOkInPeriod > 666 ||
- ieee->LinkDetectInfo.NumTxOkInPeriod > 666 ) {
- bBusyTraffic = true;
- }
- ieee->LinkDetectInfo.NumRxOkInPeriod = 0;
- ieee->LinkDetectInfo.NumTxOkInPeriod = 0;
- ieee->LinkDetectInfo.bBusyTraffic = bBusyTraffic;
+ //to get busy traffic condition
+ if (ieee->state == IEEE80211_LINKED) {
+ if (ieee->LinkDetectInfo.NumRxOkInPeriod > 666 ||
+ ieee->LinkDetectInfo.NumTxOkInPeriod > 666 ) {
+ bBusyTraffic = true;
}
+ ieee->LinkDetectInfo.NumRxOkInPeriod = 0;
+ ieee->LinkDetectInfo.NumTxOkInPeriod = 0;
+ ieee->LinkDetectInfo.bBusyTraffic = bBusyTraffic;
}
//added by amy for AP roaming
- {
- if (priv->ieee80211->state == IEEE80211_LINKED && priv->ieee80211->iw_mode == IW_MODE_INFRA)
- {
- u32 TotalRxBcnNum = 0;
- u32 TotalRxDataNum = 0;
+ if (priv->ieee80211->state == IEEE80211_LINKED && priv->ieee80211->iw_mode == IW_MODE_INFRA) {
- rtl819x_update_rxcounts(priv, &TotalRxBcnNum, &TotalRxDataNum);
- if ((TotalRxBcnNum+TotalRxDataNum) == 0)
- {
- #ifdef TODO
- if (rfState == eRfOff)
- RT_TRACE(COMP_ERR, "========>%s()\n", __func__);
- #endif
- printk("===>%s(): AP is power off,connect another one\n", __func__);
- // Dot11d_Reset(dev);
- priv->ieee80211->state = IEEE80211_ASSOCIATING;
- notify_wx_assoc_event(priv->ieee80211);
- RemovePeerTS(priv->ieee80211, priv->ieee80211->current_network.bssid);
- priv->ieee80211->link_change(dev);
- queue_work(priv->ieee80211->wq, &priv->ieee80211->associate_procedure_wq);
+ rtl819x_update_rxcounts(priv, &TotalRxBcnNum, &TotalRxDataNum);
+ if ((TotalRxBcnNum+TotalRxDataNum) == 0) {
+#ifdef TODO
+ if (rfState == eRfOff)
+ RT_TRACE(COMP_ERR, "========>%s()\n", __func__);
+#endif
+ netdev_dbg(dev, "===>%s(): AP is power off, connect another one\n", __func__);
+ priv->ieee80211->state = IEEE80211_ASSOCIATING;
+ notify_wx_assoc_event(priv->ieee80211);
+ RemovePeerTS(priv->ieee80211, priv->ieee80211->current_network.bssid);
+ priv->ieee80211->link_change(dev);
+ queue_work(priv->ieee80211->wq, &priv->ieee80211->associate_procedure_wq);
- }
}
- priv->ieee80211->LinkDetectInfo.NumRecvBcnInPeriod = 0;
- priv->ieee80211->LinkDetectInfo.NumRecvDataInPeriod = 0;
}
-// CAM_read_entry(dev,4);
+ priv->ieee80211->LinkDetectInfo.NumRecvBcnInPeriod = 0;
+ priv->ieee80211->LinkDetectInfo.NumRecvDataInPeriod = 0;
//check if reset the driver
- if (check_reset_cnt++ >= 3)
- {
+ if (check_reset_cnt++ >= 3) {
ResetType = rtl819x_ifcheck_resetornot(dev);
check_reset_cnt = 3;
- //DbgPrint("Start to check silent reset\n");
}
- // RT_TRACE(COMP_RESET,"%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n",__FUNCTION__,priv->force_reset,priv->ResetProgress,priv->bForcedSilentReset,priv->bDisableNormalResetCheck,ResetType);
if ((priv->force_reset) || (priv->ResetProgress == RESET_TYPE_NORESET &&
- (priv->bForcedSilentReset ||
- (!priv->bDisableNormalResetCheck && ResetType == RESET_TYPE_SILENT)))) // This is control by OID set in Pomelo
- {
+ (priv->bForcedSilentReset ||
+ (!priv->bDisableNormalResetCheck && ResetType == RESET_TYPE_SILENT)))) { // This is control by OID set in Pomelo
RT_TRACE(COMP_RESET, "%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n", __func__, priv->force_reset, priv->ResetProgress, priv->bForcedSilentReset, priv->bDisableNormalResetCheck, ResetType);
rtl819x_ifsilentreset(dev);
}
void watch_dog_timer_callback(unsigned long data)
{
struct r8192_priv *priv = ieee80211_priv((struct net_device *) data);
- //printk("===============>watch_dog timer\n");
queue_delayed_work(priv->priv_wq, &priv->watch_dog_wq, 0);
mod_timer(&priv->watch_dog_timer, jiffies + MSECS(IEEE80211_WATCH_DOG_TIME));
}
int _rtl8192_up(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- //int i;
int init_status = 0;
priv->up = 1;
priv->ieee80211->ieee_up = 1;
RT_TRACE(COMP_INIT, "Bringing up iface");
init_status = rtl8192_adapter_start(dev);
- if (!init_status)
- {
+ if (!init_status) {
RT_TRACE(COMP_ERR, "ERR!!! %s(): initialization failed!\n", __func__);
priv->up = priv->ieee80211->ieee_up = 0;
return -EAGAIN;
}
RT_TRACE(COMP_INIT, "start adapter finished\n");
rtl8192_rx_enable(dev);
-// rtl8192_tx_enable(dev);
if (priv->ieee80211->state != IEEE80211_LINKED)
- ieee80211_softmac_start_protocol(priv->ieee80211);
+ ieee80211_softmac_start_protocol(priv->ieee80211);
ieee80211_reset_queue(priv->ieee80211);
watch_dog_timer_callback((unsigned long) dev);
if (!netif_queue_stopped(dev))
priv->up = 0;
priv->ieee80211->ieee_up = 0;
RT_TRACE(COMP_DOWN, "==========>%s()\n", __func__);
-/* FIXME */
+ /* FIXME */
if (!netif_queue_stopped(dev))
netif_stop_queue(dev);
rtl8192_rtx_disable(dev);
- //rtl8192_irq_disable(dev);
- /* Tx related queue release */
- for (i = 0; i < MAX_QUEUE_SIZE; i++) {
- skb_queue_purge(&priv->ieee80211->skb_waitQ [i]);
- }
- for (i = 0; i < MAX_QUEUE_SIZE; i++) {
- skb_queue_purge(&priv->ieee80211->skb_aggQ [i]);
- }
+ /* Tx related queue release */
+ for (i = 0; i < MAX_QUEUE_SIZE; i++)
+ skb_queue_purge(&priv->ieee80211->skb_waitQ[i]);
+ for (i = 0; i < MAX_QUEUE_SIZE; i++)
+ skb_queue_purge(&priv->ieee80211->skb_aggQ[i]);
- for (i = 0; i < MAX_QUEUE_SIZE; i++) {
- skb_queue_purge(&priv->ieee80211->skb_drv_aggQ [i]);
- }
+ for (i = 0; i < MAX_QUEUE_SIZE; i++)
+ skb_queue_purge(&priv->ieee80211->skb_drv_aggQ[i]);
//as cancel_delayed_work will del work->timer, so if work is not defined as struct delayed_work, it will corrupt
-// flush_scheduled_work();
rtl8192_cancel_deferred_work(priv);
deinit_hal_dm(dev);
del_timer_sync(&priv->watch_dog_timer);
memset(&priv->ieee80211->current_network, 0, offsetof(struct ieee80211_network, list));
RT_TRACE(COMP_DOWN, "<==========%s()\n", __func__);
- return 0;
+ return 0;
}
{
struct r8192_priv *priv = ieee80211_priv(dev);
int reset_status = 0;
- //u8 reset_times = 0;
if (priv->up == 0) return;
priv->up = 0;
rtl8192_cancel_deferred_work(priv);
del_timer_sync(&priv->watch_dog_timer);
- //cancel_delayed_work(&priv->SwChnlWorkItem);
ieee80211_softmac_stop_protocol(priv->ieee80211);
- //rtl8192_irq_disable(dev);
rtl8192_rtx_disable(dev);
reset_status = _rtl8192_up(dev);
}
-/*
-void rtl8192_restart(struct net_device *dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
-*/
void rtl8192_restart(struct work_struct *work)
{
struct r8192_priv *priv = container_of(work, struct r8192_priv, reset_wq);
struct r8192_priv *priv = ieee80211_priv(dev);
short promisc;
- //down(&priv->wx_sem);
-
/* FIXME FIXME */
- promisc = (dev->flags & IFF_PROMISC) ? 1:0;
+ promisc = (dev->flags & IFF_PROMISC) ? 1 : 0;
if (promisc != priv->promisc)
- // rtl8192_commit(dev);
-
- priv->promisc = promisc;
- //schedule_work(&priv->reset_wq);
- //up(&priv->wx_sem);
+ priv->promisc = promisc;
}
u32 key[4];
u8 broadcast_addr[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
struct iw_point *p = &wrq->u.data;
- struct ieee_param *ipw = NULL;//(struct ieee_param *)wrq->u.data.pointer;
+ struct ieee_param *ipw = NULL;
down(&priv->wx_sem);
- if (p->length < sizeof(struct ieee_param) || !p->pointer){
- ret = -EINVAL;
- goto out;
+ if (p->length < sizeof(struct ieee_param) || !p->pointer) {
+ ret = -EINVAL;
+ goto out;
}
- ipw = kmalloc(p->length, GFP_KERNEL);
- if (ipw == NULL){
- ret = -ENOMEM;
- goto out;
- }
- if (copy_from_user(ipw, p->pointer, p->length)) {
+ ipw = kmalloc(p->length, GFP_KERNEL);
+ if (ipw == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ if (copy_from_user(ipw, p->pointer, p->length)) {
kfree(ipw);
- ret = -EFAULT;
- goto out;
+ ret = -EFAULT;
+ goto out;
}
switch (cmd) {
case RTL_IOCTL_WPA_SUPPLICANT:
- //parse here for HW security
- if (ipw->cmd == IEEE_CMD_SET_ENCRYPTION)
- {
- if (ipw->u.crypt.set_tx)
- {
- if (strcmp(ipw->u.crypt.alg, "CCMP") == 0)
+ //parse here for HW security
+ if (ipw->cmd == IEEE_CMD_SET_ENCRYPTION) {
+ if (ipw->u.crypt.set_tx) {
+ if (strcmp(ipw->u.crypt.alg, "CCMP") == 0) {
ieee->pairwise_key_type = KEY_TYPE_CCMP;
- else if (strcmp(ipw->u.crypt.alg, "TKIP") == 0)
+ } else if (strcmp(ipw->u.crypt.alg, "TKIP") == 0) {
ieee->pairwise_key_type = KEY_TYPE_TKIP;
- else if (strcmp(ipw->u.crypt.alg, "WEP") == 0)
- {
+ } else if (strcmp(ipw->u.crypt.alg, "WEP") == 0) {
if (ipw->u.crypt.key_len == 13)
ieee->pairwise_key_type = KEY_TYPE_WEP104;
else if (ipw->u.crypt.key_len == 5)
ieee->pairwise_key_type = KEY_TYPE_WEP40;
- }
- else
+ } else {
ieee->pairwise_key_type = KEY_TYPE_NA;
+ }
- if (ieee->pairwise_key_type)
- {
+ if (ieee->pairwise_key_type) {
memcpy((u8 *)key, ipw->u.crypt.key, 16);
EnableHWSecurityConfig8192(dev);
- //we fill both index entry and 4th entry for pairwise key as in IPW interface, adhoc will only get here, so we need index entry for its default key serching!
- //added by WB.
+ //we fill both index entry and 4th entry for pairwise key as in IPW interface, adhoc will only get here, so we need index entry for its default key serching!
+ //added by WB.
setKey(dev, 4, ipw->u.crypt.idx, ieee->pairwise_key_type, (u8 *)ieee->ap_mac_addr, 0, key);
if (ieee->auth_mode != 2)
- setKey(dev, ipw->u.crypt.idx, ipw->u.crypt.idx, ieee->pairwise_key_type, (u8 *)ieee->ap_mac_addr, 0, key);
+ setKey(dev, ipw->u.crypt.idx, ipw->u.crypt.idx, ieee->pairwise_key_type, (u8 *)ieee->ap_mac_addr, 0, key);
}
- }
- else //if (ipw->u.crypt.idx) //group key use idx > 0
- {
+ } else {
memcpy((u8 *)key, ipw->u.crypt.key, 16);
- if (strcmp(ipw->u.crypt.alg, "CCMP") == 0)
+ if (strcmp(ipw->u.crypt.alg, "CCMP") == 0) {
ieee->group_key_type = KEY_TYPE_CCMP;
- else if (strcmp(ipw->u.crypt.alg, "TKIP") == 0)
+ } else if (strcmp(ipw->u.crypt.alg, "TKIP") == 0) {
ieee->group_key_type = KEY_TYPE_TKIP;
- else if (strcmp(ipw->u.crypt.alg, "WEP") == 0)
- {
+ } else if (strcmp(ipw->u.crypt.alg, "WEP") == 0) {
if (ipw->u.crypt.key_len == 13)
ieee->group_key_type = KEY_TYPE_WEP104;
else if (ipw->u.crypt.key_len == 5)
ieee->group_key_type = KEY_TYPE_WEP40;
- }
- else
+ } else {
ieee->group_key_type = KEY_TYPE_NA;
+ }
- if (ieee->group_key_type)
- {
- setKey(dev,
- ipw->u.crypt.idx,
- ipw->u.crypt.idx, //KeyIndex
- ieee->group_key_type, //KeyType
- broadcast_addr, //MacAddr
- 0, //DefaultKey
- key); //KeyContent
+ if (ieee->group_key_type) {
+ setKey(dev, ipw->u.crypt.idx,
+ ipw->u.crypt.idx, //KeyIndex
+ ieee->group_key_type, //KeyType
+ broadcast_addr, //MacAddr
+ 0, //DefaultKey
+ key); //KeyContent
}
}
}
#ifdef JOHN_HWSEC_DEBUG
//john's test 0711
printk("@@ wrq->u pointer = ");
- for (i = 0; i < wrq->u.data.length; i++){
+ for (i = 0; i < wrq->u.data.length; i++) {
if (i%10 == 0) printk("\n");
printk("%8x|", ((u32 *)wrq->u.data.pointer)[i]);
}
bool bcheck = false;
u8 rfpath;
u32 nspatial_stream, tmp_val;
- //u8 i;
static u32 slide_rssi_index, slide_rssi_statistics;
static u32 slide_evm_index, slide_evm_statistics;
static u32 last_rssi, last_evm;
//
// Check whether we should take the previous packet into accounting
//
- if (!pprevious_stats->bIsAMPDU)
- {
+ if (!pprevious_stats->bIsAMPDU) {
// if previous packet is not aggregated packet
bcheck = true;
}
- if (slide_rssi_statistics++ >= PHY_RSSI_SLID_WIN_MAX)
- {
+ if (slide_rssi_statistics++ >= PHY_RSSI_SLID_WIN_MAX) {
slide_rssi_statistics = PHY_RSSI_SLID_WIN_MAX;
last_rssi = priv->stats.slide_signal_strength[slide_rssi_index];
priv->stats.slide_rssi_total -= last_rssi;
//
// If the previous packet does not match the criteria, neglect it
//
- if (!pprevious_stats->bPacketMatchBSSID)
- {
+ if (!pprevious_stats->bPacketMatchBSSID) {
if (!pprevious_stats->bToSelfBA)
return;
}
// <2> Showed on UI for engineering
// hardware does not provide rssi information for each rf path in CCK
- if (!pprevious_stats->bIsCCK && (pprevious_stats->bPacketToSelf || pprevious_stats->bToSelfBA))
- {
- for (rfpath = RF90_PATH_A; rfpath < priv->NumTotalRFPath; rfpath++)
- {
- if (!rtl8192_phy_CheckIsLegalRFPath(priv->ieee80211->dev, rfpath))
- continue;
+ if (!pprevious_stats->bIsCCK && (pprevious_stats->bPacketToSelf || pprevious_stats->bToSelfBA)) {
+ for (rfpath = RF90_PATH_A; rfpath < priv->NumTotalRFPath; rfpath++) {
+ if (!rtl8192_phy_CheckIsLegalRFPath(priv->ieee80211->dev, rfpath))
+ continue;
//Fixed by Jacken 2008-03-20
if (priv->stats.rx_rssi_percentage[rfpath] == 0)
- {
priv->stats.rx_rssi_percentage[rfpath] = pprevious_stats->RxMIMOSignalStrength[rfpath];
- //DbgPrint("MIMO RSSI initialize \n");
- }
- if (pprevious_stats->RxMIMOSignalStrength[rfpath] > priv->stats.rx_rssi_percentage[rfpath])
- {
+ if (pprevious_stats->RxMIMOSignalStrength[rfpath] > priv->stats.rx_rssi_percentage[rfpath]) {
priv->stats.rx_rssi_percentage[rfpath] =
((priv->stats.rx_rssi_percentage[rfpath]*(Rx_Smooth_Factor-1)) +
- (pprevious_stats->RxMIMOSignalStrength[rfpath])) /(Rx_Smooth_Factor);
+ (pprevious_stats->RxMIMOSignalStrength[rfpath])) /(Rx_Smooth_Factor);
priv->stats.rx_rssi_percentage[rfpath] = priv->stats.rx_rssi_percentage[rfpath] + 1;
- }
- else
- {
+ } else {
priv->stats.rx_rssi_percentage[rfpath] =
((priv->stats.rx_rssi_percentage[rfpath]*(Rx_Smooth_Factor-1)) +
- (pprevious_stats->RxMIMOSignalStrength[rfpath])) /(Rx_Smooth_Factor);
+ (pprevious_stats->RxMIMOSignalStrength[rfpath])) /(Rx_Smooth_Factor);
}
RT_TRACE(COMP_DBG, "priv->stats.rx_rssi_percentage[rfPath] = %d \n", priv->stats.rx_rssi_percentage[rfpath]);
}
// Check PWDB.
//
RT_TRACE(COMP_RXDESC, "Smooth %s PWDB = %d\n",
- pprevious_stats->bIsCCK? "CCK": "OFDM",
- pprevious_stats->RxPWDBAll);
+ pprevious_stats->bIsCCK ? "CCK" : "OFDM",
+ pprevious_stats->RxPWDBAll);
- if (pprevious_stats->bPacketBeacon)
- {
-/* record the beacon pwdb to the sliding window. */
- if (slide_beacon_adc_pwdb_statistics++ >= PHY_Beacon_RSSI_SLID_WIN_MAX)
- {
+ if (pprevious_stats->bPacketBeacon) {
+ /* record the beacon pwdb to the sliding window. */
+ if (slide_beacon_adc_pwdb_statistics++ >= PHY_Beacon_RSSI_SLID_WIN_MAX) {
slide_beacon_adc_pwdb_statistics = PHY_Beacon_RSSI_SLID_WIN_MAX;
last_beacon_adc_pwdb = priv->stats.Slide_Beacon_pwdb[slide_beacon_adc_pwdb_index];
priv->stats.Slide_Beacon_Total -= last_beacon_adc_pwdb;
- //DbgPrint("slide_beacon_adc_pwdb_index = %d, last_beacon_adc_pwdb = %d, Adapter->RxStats.Slide_Beacon_Total = %d\n",
- // slide_beacon_adc_pwdb_index, last_beacon_adc_pwdb, Adapter->RxStats.Slide_Beacon_Total);
}
priv->stats.Slide_Beacon_Total += pprevious_stats->RxPWDBAll;
priv->stats.Slide_Beacon_pwdb[slide_beacon_adc_pwdb_index] = pprevious_stats->RxPWDBAll;
- //DbgPrint("slide_beacon_adc_pwdb_index = %d, pPreviousRfd->Status.RxPWDBAll = %d\n", slide_beacon_adc_pwdb_index, pPreviousRfd->Status.RxPWDBAll);
slide_beacon_adc_pwdb_index++;
if (slide_beacon_adc_pwdb_index >= PHY_Beacon_RSSI_SLID_WIN_MAX)
slide_beacon_adc_pwdb_index = 0;
}
RT_TRACE(COMP_RXDESC, "Smooth %s PWDB = %d\n",
- pprevious_stats->bIsCCK? "CCK": "OFDM",
- pprevious_stats->RxPWDBAll);
+ pprevious_stats->bIsCCK ? "CCK" : "OFDM",
+ pprevious_stats->RxPWDBAll);
- if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA)
- {
+ if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA) {
if (priv->undecorated_smoothed_pwdb < 0) // initialize
- {
priv->undecorated_smoothed_pwdb = pprevious_stats->RxPWDBAll;
- //DbgPrint("First pwdb initialize \n");
- }
- if (pprevious_stats->RxPWDBAll > (u32)priv->undecorated_smoothed_pwdb)
- {
+ if (pprevious_stats->RxPWDBAll > (u32)priv->undecorated_smoothed_pwdb) {
priv->undecorated_smoothed_pwdb =
- (((priv->undecorated_smoothed_pwdb)*(Rx_Smooth_Factor-1)) +
- (pprevious_stats->RxPWDBAll)) /(Rx_Smooth_Factor);
+ (((priv->undecorated_smoothed_pwdb)*(Rx_Smooth_Factor-1)) +
+ (pprevious_stats->RxPWDBAll)) /(Rx_Smooth_Factor);
priv->undecorated_smoothed_pwdb = priv->undecorated_smoothed_pwdb + 1;
- }
- else
- {
+ } else {
priv->undecorated_smoothed_pwdb =
- (((priv->undecorated_smoothed_pwdb)*(Rx_Smooth_Factor-1)) +
- (pprevious_stats->RxPWDBAll)) /(Rx_Smooth_Factor);
+ (((priv->undecorated_smoothed_pwdb)*(Rx_Smooth_Factor-1)) +
+ (pprevious_stats->RxPWDBAll)) /(Rx_Smooth_Factor);
}
}
// Check EVM
//
/* record the general EVM to the sliding window. */
- if (pprevious_stats->SignalQuality == 0)
- {
- }
- else
- {
- if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA){
- if (slide_evm_statistics++ >= PHY_RSSI_SLID_WIN_MAX){
+ if (pprevious_stats->SignalQuality) {
+ if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA) {
+ if (slide_evm_statistics++ >= PHY_RSSI_SLID_WIN_MAX) {
slide_evm_statistics = PHY_RSSI_SLID_WIN_MAX;
last_evm = priv->stats.slide_evm[slide_evm_index];
priv->stats.slide_evm_total -= last_evm;
}
// <2> Showed on UI for engineering
- if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA)
- {
- for (nspatial_stream = 0; nspatial_stream < 2; nspatial_stream++) // 2 spatial stream
- {
- if (pprevious_stats->RxMIMOSignalQuality[nspatial_stream] != -1)
- {
+ if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA) {
+ for (nspatial_stream = 0; nspatial_stream < 2; nspatial_stream++) { // 2 spatial stream
+ if (pprevious_stats->RxMIMOSignalQuality[nspatial_stream] != -1) {
if (priv->stats.rx_evm_percentage[nspatial_stream] == 0) // initialize
- {
priv->stats.rx_evm_percentage[nspatial_stream] = pprevious_stats->RxMIMOSignalQuality[nspatial_stream];
- }
priv->stats.rx_evm_percentage[nspatial_stream] =
((priv->stats.rx_evm_percentage[nspatial_stream]* (Rx_Smooth_Factor-1)) +
- (pprevious_stats->RxMIMOSignalQuality[nspatial_stream]* 1)) / (Rx_Smooth_Factor);
+ (pprevious_stats->RxMIMOSignalQuality[nspatial_stream]* 1)) / (Rx_Smooth_Factor);
}
}
}
* 05/26/2008 amy Create Version 0 porting from windows code.
*
*---------------------------------------------------------------------------*/
-static u8 rtl819x_query_rxpwrpercentage(
- char antpower
- )
+static u8 rtl819x_query_rxpwrpercentage(char antpower)
{
if ((antpower <= -100) || (antpower >= 20))
- {
return 0;
- }
else if (antpower >= 0)
- {
return 100;
- }
else
- {
- return (100+antpower);
- }
+ return 100 + antpower;
} /* QueryRxPwrPercentage */
-static u8
-rtl819x_evm_dbtopercentage(
- char value
- )
+static u8 rtl819x_evm_dbtopercentage(char value)
{
- char ret_val;
+ char ret_val;
- ret_val = value;
+ ret_val = value;
- if (ret_val >= 0)
- ret_val = 0;
- if (ret_val <= -33)
- ret_val = -33;
- ret_val = 0 - ret_val;
- ret_val *= 3;
+ if (ret_val >= 0)
+ ret_val = 0;
+ if (ret_val <= -33)
+ ret_val = -33;
+ ret_val = 0 - ret_val;
+ ret_val *= 3;
if (ret_val == 99)
ret_val = 100;
- return(ret_val);
+ return ret_val;
}
//
// Description:
// We want good-looking for signal strength/quality
// 2007/7/19 01:09, by cosa.
//
-long
-rtl819x_signal_scale_mapping(
- long currsig
- )
+long rtl819x_signal_scale_mapping(long currsig)
{
long retsig;
// Step 1. Scale mapping.
if (currsig >= 61 && currsig <= 100)
- {
retsig = 90 + ((currsig - 60) / 4);
- }
else if (currsig >= 41 && currsig <= 60)
- {
retsig = 78 + ((currsig - 40) / 2);
- }
else if (currsig >= 31 && currsig <= 40)
- {
retsig = 66 + (currsig - 30);
- }
else if (currsig >= 21 && currsig <= 30)
- {
retsig = 54 + (currsig - 20);
- }
else if (currsig >= 5 && currsig <= 20)
- {
retsig = 42 + (((currsig - 5) * 2) / 3);
- }
else if (currsig == 4)
- {
retsig = 36;
- }
else if (currsig == 3)
- {
retsig = 27;
- }
else if (currsig == 2)
- {
retsig = 18;
- }
else if (currsig == 1)
- {
retsig = 9;
- }
else
- {
retsig = currsig;
- }
return retsig;
}
-static void rtl8192_query_rxphystatus(
- struct r8192_priv *priv,
- struct ieee80211_rx_stats *pstats,
- rx_drvinfo_819x_usb *pdrvinfo,
- struct ieee80211_rx_stats *precord_stats,
- bool bpacket_match_bssid,
- bool bpacket_toself,
- bool bPacketBeacon,
- bool bToSelfBA
- )
+static inline bool rx_hal_is_cck_rate(struct rx_drvinfo_819x_usb *pdrvinfo)
+{
+ if (pdrvinfo->RxHT)
+ return false;
+
+ switch (pdrvinfo->RxRate) {
+ case DESC90_RATE1M:
+ case DESC90_RATE2M:
+ case DESC90_RATE5_5M:
+ case DESC90_RATE11M:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static void rtl8192_query_rxphystatus(struct r8192_priv *priv,
+ struct ieee80211_rx_stats *pstats,
+ rx_drvinfo_819x_usb *pdrvinfo,
+ struct ieee80211_rx_stats *precord_stats,
+ bool bpacket_match_bssid,
+ bool bpacket_toself,
+ bool bPacketBeacon,
+ bool bToSelfBA)
{
- //PRT_RFD_STATUS pRtRfdStatus = &(pRfd->Status);
phy_sts_ofdm_819xusb_t *pofdm_buf;
phy_sts_cck_819xusb_t *pcck_buf;
phy_ofdm_rx_status_rxsc_sgien_exintfflag *prxsc;
u8 *prxpkt;
u8 i, max_spatial_stream, tmp_rxsnr, tmp_rxevm, rxsc_sgien_exflg;
char rx_pwr[4], rx_pwr_all = 0;
- //long rx_avg_pwr = 0;
char rx_snrX, rx_evmX;
u8 evm, pwdb_all;
- u32 RSSI, total_rssi = 0;//, total_evm=0;
-// long signal_strength_index = 0;
+ u32 RSSI, total_rssi = 0;
u8 is_cck_rate = 0;
u8 rf_rx_num = 0;
+ u8 sq;
priv->stats.numqry_phystatus++;
memset(precord_stats, 0, sizeof(struct ieee80211_rx_stats));
pstats->bPacketMatchBSSID = precord_stats->bPacketMatchBSSID = bpacket_match_bssid;
pstats->bPacketToSelf = precord_stats->bPacketToSelf = bpacket_toself;
- pstats->bIsCCK = precord_stats->bIsCCK = is_cck_rate;//RX_HAL_IS_CCK_RATE(pDrvInfo);
+ pstats->bIsCCK = precord_stats->bIsCCK = is_cck_rate;
pstats->bPacketBeacon = precord_stats->bPacketBeacon = bPacketBeacon;
pstats->bToSelfBA = precord_stats->bToSelfBA = bToSelfBA;
precord_stats->RxMIMOSignalQuality[0] = -1;
precord_stats->RxMIMOSignalQuality[1] = -1;
- if (is_cck_rate)
- {
+ if (is_cck_rate) {
//
// (1)Hardware does not provide RSSI for CCK
//
//
// (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
//
- u8 report;//, cck_agc_rpt;
+ u8 report;
priv->stats.numqry_phystatusCCK++;
- if (!priv->bCckHighPower)
- {
+ if (!priv->bCckHighPower) {
report = pcck_buf->cck_agc_rpt & 0xc0;
report = report>>6;
- switch (report)
- {
+ switch (report) {
//Fixed by Jacken from Bryant 2008-03-20
//Original value is -38 , -26 , -14 , -2
//Fixed value is -35 , -23 , -11 , 6
- case 0x3:
- rx_pwr_all = -35 - (pcck_buf->cck_agc_rpt & 0x3e);
- break;
- case 0x2:
- rx_pwr_all = -23 - (pcck_buf->cck_agc_rpt & 0x3e);
- break;
- case 0x1:
- rx_pwr_all = -11 - (pcck_buf->cck_agc_rpt & 0x3e);
- break;
- case 0x0:
- rx_pwr_all = 6 - (pcck_buf->cck_agc_rpt & 0x3e);
- break;
+ case 0x3:
+ rx_pwr_all = -35 - (pcck_buf->cck_agc_rpt & 0x3e);
+ break;
+ case 0x2:
+ rx_pwr_all = -23 - (pcck_buf->cck_agc_rpt & 0x3e);
+ break;
+ case 0x1:
+ rx_pwr_all = -11 - (pcck_buf->cck_agc_rpt & 0x3e);
+ break;
+ case 0x0:
+ rx_pwr_all = 6 - (pcck_buf->cck_agc_rpt & 0x3e);
+ break;
}
- }
- else
- {
+ } else {
report = pcck_buf->cck_agc_rpt & 0x60;
report = report>>5;
- switch (report)
- {
- case 0x3:
- rx_pwr_all = -35 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
- break;
- case 0x2:
- rx_pwr_all = -23 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
- break;
- case 0x1:
- rx_pwr_all = -11 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
- break;
- case 0x0:
- rx_pwr_all = 6 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
- break;
+ switch (report) {
+ case 0x3:
+ rx_pwr_all = -35 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
+ break;
+ case 0x2:
+ rx_pwr_all = -23 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
+ break;
+ case 0x1:
+ rx_pwr_all = -11 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
+ break;
+ case 0x0:
+ rx_pwr_all = 6 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
+ break;
}
}
//
// (3) Get Signal Quality (EVM)
//
- //if(bpacket_match_bssid)
- {
- u8 sq;
- if (pstats->RxPWDBAll > 40)
- {
- sq = 100;
- } else
- {
- sq = pcck_buf->sq_rpt;
+ if (pstats->RxPWDBAll > 40) {
+ sq = 100;
+ } else {
+ sq = pcck_buf->sq_rpt;
- if (pcck_buf->sq_rpt > 64)
- sq = 0;
- else if (pcck_buf->sq_rpt < 20)
- sq = 100;
- else
- sq = ((64-sq) * 100) / 44;
- }
- pstats->SignalQuality = precord_stats->SignalQuality = sq;
- pstats->RxMIMOSignalQuality[0] = precord_stats->RxMIMOSignalQuality[0] = sq;
- pstats->RxMIMOSignalQuality[1] = precord_stats->RxMIMOSignalQuality[1] = -1;
+ if (pcck_buf->sq_rpt > 64)
+ sq = 0;
+ else if (pcck_buf->sq_rpt < 20)
+ sq = 100;
+ else
+ sq = ((64-sq) * 100) / 44;
}
- }
- else
- {
+ pstats->SignalQuality = precord_stats->SignalQuality = sq;
+ pstats->RxMIMOSignalQuality[0] = precord_stats->RxMIMOSignalQuality[0] = sq;
+ pstats->RxMIMOSignalQuality[1] = precord_stats->RxMIMOSignalQuality[1] = -1;
+
+ } else {
priv->stats.numqry_phystatusHT++;
//
// (1)Get RSSI for HT rate
//
- for (i = RF90_PATH_A; i < priv->NumTotalRFPath; i++)
- {
+ for (i = RF90_PATH_A; i < priv->NumTotalRFPath; i++) {
// 2008/01/30 MH we will judge RF RX path now.
if (priv->brfpath_rxenable[i])
rf_rx_num++;
else
continue;
- if (!rtl8192_phy_CheckIsLegalRFPath(priv->ieee80211->dev, i))
+ if (!rtl8192_phy_CheckIsLegalRFPath(priv->ieee80211->dev, i))
continue;
//Fixed by Jacken from Bryant 2008-03-20
//Get Rx snr value in DB
tmp_rxsnr = pofdm_buf->rxsnr_X[i];
rx_snrX = (char)(tmp_rxsnr);
- //rx_snrX >>= 1;
rx_snrX /= 2;
priv->stats.rxSNRdB[i] = (long)rx_snrX;
total_rssi += RSSI;
/* Record Signal Strength for next packet */
- //if(bpacket_match_bssid)
- {
- pstats->RxMIMOSignalStrength[i] = (u8) RSSI;
- precord_stats->RxMIMOSignalStrength[i] = (u8) RSSI;
- }
+ pstats->RxMIMOSignalStrength[i] = (u8) RSSI;
+ precord_stats->RxMIMOSignalStrength[i] = (u8) RSSI;
}
// (3)EVM of HT rate
//
if (pdrvinfo->RxHT && pdrvinfo->RxRate >= DESC90_RATEMCS8 &&
- pdrvinfo->RxRate <= DESC90_RATEMCS15)
+ pdrvinfo->RxRate <= DESC90_RATEMCS15)
max_spatial_stream = 2; //both spatial stream make sense
else
max_spatial_stream = 1; //only spatial stream 1 makes sense
- for (i = 0; i < max_spatial_stream; i++)
- {
+ for (i = 0; i < max_spatial_stream; i++) {
tmp_rxevm = pofdm_buf->rxevm_X[i];
rx_evmX = (char)(tmp_rxevm);
rx_evmX /= 2; //dbm
evm = rtl819x_evm_dbtopercentage(rx_evmX);
- //if(bpacket_match_bssid)
- {
- if (i == 0) // Fill value in RFD, Get the first spatial stream only
- pstats->SignalQuality = precord_stats->SignalQuality = (u8)(evm & 0xff);
- pstats->RxMIMOSignalQuality[i] = precord_stats->RxMIMOSignalQuality[i] = (u8)(evm & 0xff);
- }
+ if (i == 0) // Fill value in RFD, Get the first spatial stream only
+ pstats->SignalQuality = precord_stats->SignalQuality = (u8)(evm & 0xff);
+ pstats->RxMIMOSignalQuality[i] = precord_stats->RxMIMOSignalQuality[i] = (u8)(evm & 0xff);
}
//UI BSS List signal strength(in percentage), make it good looking, from 0~100.
//It is assigned to the BSS List in GetValueFromBeaconOrProbeRsp().
- if (is_cck_rate)
- {
- pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)pwdb_all));//PWDB_ALL;
-
- }
- else
- {
- //pRfd->Status.SignalStrength = pRecordRfd->Status.SignalStrength = (u8)(SignalScaleMapping(total_rssi/=RF90_PATH_MAX));//(u8)(total_rssi/=RF90_PATH_MAX);
+ if (is_cck_rate) {
+ pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)pwdb_all));
+ } else {
// We can judge RX path number now.
if (rf_rx_num != 0)
pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)(total_rssi /= rf_rx_num)));
}
} /* QueryRxPhyStatus8190Pci */
-void
-rtl8192_record_rxdesc_forlateruse(
- struct ieee80211_rx_stats *psrc_stats,
- struct ieee80211_rx_stats *ptarget_stats
-)
+void rtl8192_record_rxdesc_forlateruse(struct ieee80211_rx_stats *psrc_stats,
+ struct ieee80211_rx_stats *ptarget_stats)
{
ptarget_stats->bIsAMPDU = psrc_stats->bIsAMPDU;
ptarget_stats->bFirstMPDU = psrc_stats->bFirstMPDU;
bool bPacketBeacon = FALSE, bToSelfBA = FALSE;
static struct ieee80211_rx_stats previous_stats;
struct ieee80211_hdr_3addr *hdr;//by amy
- u16 fc, type;
+ u16 fc, type;
// Get Signal Quality for only RX data queue (but not command queue)
u8 *tmp_buf;
- //u16 tmp_buf_len = 0;
u8 *praddr;
/* Get MAC frame start address. */
- tmp_buf = (u8 *)skb->data;// + get_rxpacket_shiftbytes_819xusb(pstats);
+ tmp_buf = (u8 *)skb->data;
hdr = (struct ieee80211_hdr_3addr *)tmp_buf;
fc = le16_to_cpu(hdr->frame_ctl);
/* Check if the received packet is acceptable. */
bpacket_match_bssid = ((IEEE80211_FTYPE_CTL != type) &&
- (eqMacAddr(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS)? hdr->addr2 : hdr->addr3))
- && (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV));
+ (eqMacAddr(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS) ? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS) ? hdr->addr2 : hdr->addr3))
+ && (!pstats->bHwError) && (!pstats->bCRC) && (!pstats->bICV));
bpacket_toself = bpacket_match_bssid & (eqMacAddr(praddr, priv->ieee80211->dev->dev_addr));
- if (WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BEACON)
- {
- bPacketBeacon = true;
- //DbgPrint("Beacon 2, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf);
- }
- if (WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BLOCKACK)
- {
- if ((eqMacAddr(praddr, dev->dev_addr)))
- bToSelfBA = true;
- //DbgPrint("BlockAck, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf);
- }
+ if (WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BEACON)
+ bPacketBeacon = true;
+ if (WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BLOCKACK) {
+ if ((eqMacAddr(praddr, dev->dev_addr)))
+ bToSelfBA = true;
+ }
if (bpacket_match_bssid)
- {
priv->stats.numpacket_matchbssid++;
- }
- if (bpacket_toself){
+ if (bpacket_toself)
priv->stats.numpacket_toself++;
- }
//
// Process PHY information for previous packet (RSSI/PWDB/EVM)
//
* Return:
* None
*/
-void
-UpdateReceivedRateHistogramStatistics8190(
- struct net_device *dev,
- struct ieee80211_rx_stats *stats
- )
+void UpdateReceivedRateHistogramStatistics8190(struct net_device *dev,
+ struct ieee80211_rx_stats *stats)
{
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
u32 rcvType = 1; //0: Total, 1:OK, 2:CRC, 3:ICV
if (stats->bCRC)
- rcvType = 2;
+ rcvType = 2;
else if (stats->bICV)
- rcvType = 3;
+ rcvType = 3;
if (stats->bShortPreamble)
- preamble_guardinterval = 1;// short
+ preamble_guardinterval = 1;// short
else
- preamble_guardinterval = 0;// long
+ preamble_guardinterval = 0;// long
- switch (stats->rate)
- {
+ switch (stats->rate) {
//
// CCK rate
//
- case MGN_1M: rateIndex = 0; break;
- case MGN_2M: rateIndex = 1; break;
- case MGN_5_5M: rateIndex = 2; break;
- case MGN_11M: rateIndex = 3; break;
+ case MGN_1M: rateIndex = 0; break;
+ case MGN_2M: rateIndex = 1; break;
+ case MGN_5_5M: rateIndex = 2; break;
+ case MGN_11M: rateIndex = 3; break;
//
// Legacy OFDM rate
//
- case MGN_6M: rateIndex = 4; break;
- case MGN_9M: rateIndex = 5; break;
- case MGN_12M: rateIndex = 6; break;
- case MGN_18M: rateIndex = 7; break;
- case MGN_24M: rateIndex = 8; break;
- case MGN_36M: rateIndex = 9; break;
- case MGN_48M: rateIndex = 10; break;
- case MGN_54M: rateIndex = 11; break;
+ case MGN_6M: rateIndex = 4; break;
+ case MGN_9M: rateIndex = 5; break;
+ case MGN_12M: rateIndex = 6; break;
+ case MGN_18M: rateIndex = 7; break;
+ case MGN_24M: rateIndex = 8; break;
+ case MGN_36M: rateIndex = 9; break;
+ case MGN_48M: rateIndex = 10; break;
+ case MGN_54M: rateIndex = 11; break;
//
// 11n High throughput rate
//
- case MGN_MCS0: rateIndex = 12; break;
- case MGN_MCS1: rateIndex = 13; break;
- case MGN_MCS2: rateIndex = 14; break;
- case MGN_MCS3: rateIndex = 15; break;
- case MGN_MCS4: rateIndex = 16; break;
- case MGN_MCS5: rateIndex = 17; break;
- case MGN_MCS6: rateIndex = 18; break;
- case MGN_MCS7: rateIndex = 19; break;
- case MGN_MCS8: rateIndex = 20; break;
- case MGN_MCS9: rateIndex = 21; break;
- case MGN_MCS10: rateIndex = 22; break;
- case MGN_MCS11: rateIndex = 23; break;
- case MGN_MCS12: rateIndex = 24; break;
- case MGN_MCS13: rateIndex = 25; break;
- case MGN_MCS14: rateIndex = 26; break;
- case MGN_MCS15: rateIndex = 27; break;
- default: rateIndex = 28; break;
- }
- priv->stats.received_preamble_GI[preamble_guardinterval][rateIndex]++;
- priv->stats.received_rate_histogram[0][rateIndex]++; //total
- priv->stats.received_rate_histogram[rcvType][rateIndex]++;
+ case MGN_MCS0: rateIndex = 12; break;
+ case MGN_MCS1: rateIndex = 13; break;
+ case MGN_MCS2: rateIndex = 14; break;
+ case MGN_MCS3: rateIndex = 15; break;
+ case MGN_MCS4: rateIndex = 16; break;
+ case MGN_MCS5: rateIndex = 17; break;
+ case MGN_MCS6: rateIndex = 18; break;
+ case MGN_MCS7: rateIndex = 19; break;
+ case MGN_MCS8: rateIndex = 20; break;
+ case MGN_MCS9: rateIndex = 21; break;
+ case MGN_MCS10: rateIndex = 22; break;
+ case MGN_MCS11: rateIndex = 23; break;
+ case MGN_MCS12: rateIndex = 24; break;
+ case MGN_MCS13: rateIndex = 25; break;
+ case MGN_MCS14: rateIndex = 26; break;
+ case MGN_MCS15: rateIndex = 27; break;
+ default: rateIndex = 28; break;
+ }
+ priv->stats.received_preamble_GI[preamble_guardinterval][rateIndex]++;
+ priv->stats.received_rate_histogram[0][rateIndex]++; //total
+ priv->stats.received_rate_histogram[rcvType][rateIndex]++;
}
rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
struct net_device *dev = info->dev;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- //rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data;
rx_drvinfo_819x_usb *driver_info = NULL;
//
//Get Rx Descriptor Information
//
#ifdef USB_RX_AGGREGATION_SUPPORT
- if (bIsRxAggrSubframe)
- {
+ if (bIsRxAggrSubframe) {
rx_desc_819x_usb_aggr_subframe *desc = (rx_desc_819x_usb_aggr_subframe *)skb->data;
stats->Length = desc->Length;
stats->RxDrvInfoSize = desc->RxDrvInfoSize;
stats->Length = desc->Length;
stats->RxDrvInfoSize = desc->RxDrvInfoSize;
- stats->RxBufShift = 0;//desc->Shift&0x03;
+ stats->RxBufShift = 0;
stats->bICV = desc->ICV;
stats->bCRC = desc->CRC32;
stats->bHwError = stats->bCRC|stats->bICV;
}
if ((priv->ieee80211->pHTInfo->bCurrentHTSupport == true) && (priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP))
- {
stats->bHwError = false;
- }
else
- {
stats->bHwError = stats->bCRC|stats->bICV;
- }
if (stats->Length < 24 || stats->Length > MAX_8192U_RX_SIZE)
stats->bHwError |= 1;
// TODO: Need to verify it on FGPA platform
//Driver info are written to the RxBuffer following rx desc
if (stats->RxDrvInfoSize != 0) {
- driver_info = (rx_drvinfo_819x_usb *)(skb->data + sizeof(rx_desc_819x_usb) + \
- stats->RxBufShift);
+ driver_info = (rx_drvinfo_819x_usb *)(skb->data + sizeof(rx_desc_819x_usb) +
+ stats->RxBufShift);
/* unit: 0.5M */
/* TODO */
- if (!stats->bHwError){
+ if (!stats->bHwError) {
u8 ret_rate;
ret_rate = HwRateToMRate90(driver_info->RxHT, driver_info->RxRate);
- if (ret_rate == 0xff)
- {
+ if (ret_rate == 0xff) {
// Abnormal Case: Receive CRC OK packet with Rx descriptor indicating non supported rate.
// Special Error Handling here, 2008.05.16, by Emily
stats->bHwError = 1;
stats->rate = MGN_1M; //Set 1M rate by default
- } else
- {
+ } else {
stats->rate = ret_rate;
}
- }
- else
+ } else {
stats->rate = 0x02;
+ }
stats->bShortPreamble = driver_info->SPLCP;
stats->bFirstMPDU = (driver_info->PartAggr == 1) && (driver_info->FirstAGGR == 1);
stats->TimeStampLow = driver_info->TSFL;
// xiong mask it, 070514
- //pRfd->Status.TimeStampHigh = PlatformEFIORead4Byte(Adapter, TSFR+4);
- // stats->TimeStampHigh = read_nic_dword(dev, TSFR+4);
UpdateRxPktTimeStamp8190(dev, stats);
//
if (driver_info->FirstAGGR == 1 || driver_info->PartAggr == 1)
RT_TRACE(COMP_RXDESC, "driver_info->FirstAGGR = %d, driver_info->PartAggr = %d\n",
- driver_info->FirstAGGR, driver_info->PartAggr);
+ driver_info->FirstAGGR, driver_info->PartAggr);
}
#ifdef USB_RX_AGGREGATION_SUPPORT
/* for the rx aggregated sub frame, the redundant space truly contained in the packet */
- if (bIsRxAggrSubframe) {
+ if (bIsRxAggrSubframe)
skb_pull(skb, 8);
- }
#endif
/* for debug 2008.5.29 */
else
#endif
return (sizeof(rx_desc_819x_usb) + Status->RxDrvInfoSize
- + Status->RxBufShift);
+ + Status->RxBufShift);
}
void rtl8192_rx_nomal(struct sk_buff *skb)
.signal = 0,
.noise = -98,
.rate = 0,
- // .mac_time = jiffies,
.freq = IEEE80211_24GHZ_BAND,
};
u32 rx_pkt_len = 0;
#ifdef USB_RX_AGGREGATION_SUPPORT
if (TempByte & BIT0) {
agg_skb = skb;
- //TotalLength = agg_skb->len - 4; /*sCrcLng*/
TotalLength = stats.Length - 4; /*sCrcLng*/
- //RT_TRACE(COMP_RECV, "%s:first aggregated packet!Length=%d\n",__FUNCTION__,TotalLength);
/* though the head pointer has passed this position */
TempDWord = *(u32 *)(agg_skb->data - 4);
PacketLength = (u16)(TempDWord & 0x3FFF); /*sCrcLng*/
unicast_packet = false;
if (is_broadcast_ether_addr(ieee80211_hdr->addr1)) {
//TODO
- } else if (is_multicast_ether_addr(ieee80211_hdr->addr1)){
+ } else if (is_multicast_ether_addr(ieee80211_hdr->addr1)) {
//TODO
} else {
/* unicast packet */
dev_kfree_skb_any(skb);
} else {
priv->stats.rxoktotal++;
- if (unicast_packet) {
+ if (unicast_packet)
priv->stats.rxbytesunicast += rx_pkt_len;
- }
}
#ifdef USB_RX_AGGREGATION_SUPPORT
testing = 1;
- // (PipeIndex == 0) && (TempByte & BIT0) => TotalLength > 0.
if (TotalLength > 0) {
PacketOccupiedLendth = PacketLength + (PacketShiftBytes + 8);
if ((PacketOccupiedLendth & 0xFF) != 0)
while (agg_skb->len >= GetRxPacketShiftBytes819xUsb(&stats, true)) {
u8 tmpCRC = 0, tmpICV = 0;
- //RT_TRACE(COMP_RECV,"%s:aggred pkt,total_len = %d\n",__FUNCTION__,agg_skb->len);
RxDescr = (rx_desc_819x_usb_aggr_subframe *)(agg_skb->data);
tmpCRC = RxDescr->CRC32;
tmpICV = RxDescr->ICV;
query_rxdesc_status(agg_skb, &stats, true);
PacketLength = stats.Length;
- if (PacketLength > agg_skb->len) {
+ if (PacketLength > agg_skb->len)
break;
- }
/* Process the MPDU received */
skb = dev_alloc_skb(PacketLength);
memcpy(skb_put(skb, PacketLength), agg_skb->data, PacketLength);
unicast_packet = false;
if (is_broadcast_ether_addr(ieee80211_hdr->addr1)) {
//TODO
- } else if (is_multicast_ether_addr(ieee80211_hdr->addr1)){
+ } else if (is_multicast_ether_addr(ieee80211_hdr->addr1)) {
//TODO
} else {
/* unicast packet */
dev_kfree_skb_any(skb);
} else {
priv->stats.rxoktotal++;
- if (unicast_packet) {
+ if (unicast_packet)
priv->stats.rxbytesunicast += rx_pkt_len;
- }
}
/* should trim the packet which has been copied to target skb */
skb_pull(agg_skb, PacketLength);
#endif
} else {
priv->stats.rxurberr++;
- printk("actual_length:%d\n", skb->len);
+ netdev_dbg(dev, "actual_length: %d\n", skb->len);
dev_kfree_skb_any(skb);
}
}
-void
-rtl819xusb_process_received_packet(
- struct net_device *dev,
- struct ieee80211_rx_stats *pstats
- )
+void rtl819xusb_process_received_packet(struct net_device *dev,
+ struct ieee80211_rx_stats *pstats)
{
-// bool bfreerfd=false, bqueued=false;
u8 *frame;
u16 frame_len = 0;
struct r8192_priv *priv = ieee80211_priv(dev);
-// u8 index = 0;
-// u8 TID = 0;
- //u16 seqnum = 0;
- //PRX_TS_RECORD pts = NULL;
// Get shifted bytes of Starting address of 802.11 header. 2006.09.28, by Emily
//porting by amy 080508
if (!Adapter->bInHctTest)
CountRxErrStatistics(Adapter, pRfd);
#endif
- {
- #ifdef ENABLE_PS //by amy for adding ps function in future
- RT_RF_POWER_STATE rtState;
- // When RF is off, we should not count the packet for hw/sw synchronize
- // reason, ie. there may be a duration while sw switch is changed and hw
- // switch is being changed. 2006.12.04, by shien chang.
- Adapter->HalFunc.GetHwRegHandler(Adapter, HW_VAR_RF_STATE, (u8 *)(&rtState));
- if (rtState == eRfOff)
- {
- return;
- }
- #endif
+#ifdef ENABLE_PS //by amy for adding ps function in future
+ RT_RF_POWER_STATE rtState;
+ // When RF is off, we should not count the packet for hw/sw synchronize
+ // reason, ie. there may be a duration while sw switch is changed and hw
+ // switch is being changed. 2006.12.04, by shien chang.
+ Adapter->HalFunc.GetHwRegHandler(Adapter, HW_VAR_RF_STATE, (u8 *)(&rtState));
+ if (rtState == eRfOff)
+ return;
+#endif
priv->stats.rxframgment++;
- }
#ifdef TODO
RmMonitorSignalStrength(Adapter, pRfd);
#endif
/* 2007/01/16 MH Add RX command packet handle here. */
/* 2007/03/01 MH We have to release RFD and return if rx pkt is cmd pkt. */
if (rtl819xusb_rx_command_packet(dev, pstats))
- {
return;
- }
#ifdef SW_CRC_CHECK
SwCrcCheck();
void query_rx_cmdpkt_desc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats)
{
-// rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
-// struct net_device *dev=info->dev;
-// struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data;
-// rx_drvinfo_819x_usb *driver_info;
//
//Get Rx Descriptor Information
{
struct rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
struct net_device *dev = info->dev;
- //int ret;
-// struct urb *rx_urb = info->urb;
/* TODO */
struct ieee80211_rx_stats stats = {
.signal = 0,
.noise = -98,
.rate = 0,
- // .mac_time = jiffies,
.freq = IEEE80211_24GHZ_BAND,
};
- if ((skb->len >= (20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE))
- {
+ if ((skb->len >= (20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE)) {
query_rx_cmdpkt_desc_status(skb, &stats);
// this is to be done by amy 080508 prfd->queue_id = 1;
switch (info->out_pipe) {
/* Nomal packet pipe */
case 3:
- //RT_TRACE(COMP_RECV, "normal in-pipe index(%d)\n",info->out_pipe);
priv->IrpPendingCount--;
rtl8192_rx_nomal(skb);
break;
- /* Command packet pipe */
+ /* Command packet pipe */
case 9:
- RT_TRACE(COMP_RECV, "command in-pipe index(%d)\n",\
- info->out_pipe);
+ RT_TRACE(COMP_RECV, "command in-pipe index(%d)\n",
+ info->out_pipe);
rtl8192_rx_cmd(skb);
break;
default: /* should never get here! */
- RT_TRACE(COMP_ERR, "Unknown in-pipe index(%d)\n",\
- info->out_pipe);
+ RT_TRACE(COMP_ERR, "Unknown in-pipe index(%d)\n",
+ info->out_pipe);
dev_kfree_skb(skb);
break;
*****************************************************************************/
static int rtl8192_usb_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
+ const struct usb_device_id *id)
{
-// unsigned long ioaddr = 0;
struct net_device *dev = NULL;
struct r8192_priv *priv = NULL;
struct usb_device *udev = interface_to_usbdev(intf);
dev->netdev_ops = &rtl8192_netdev_ops;
- //DMESG("Oops: i'm coming\n");
#if WIRELESS_EXT >= 12
#if WIRELESS_EXT < 17
dev->get_wireless_stats = r8192_get_wireless_stats;
dev->watchdog_timeo = HZ*3; //modified by john, 0805
- if (dev_alloc_name(dev, ifname) < 0){
+ if (dev_alloc_name(dev, ifname) < 0) {
RT_TRACE(COMP_INIT, "Oops: devname already taken! Trying wlan%%d...\n");
ifname = "wlan%d";
dev_alloc_name(dev, ifname);
}
RT_TRACE(COMP_INIT, "Driver probe completed1\n");
- if (rtl8192_init(dev) != 0){
+ if (rtl8192_init(dev) != 0) {
RT_TRACE(COMP_ERR, "Initialization failed");
ret = -ENODEV;
goto fail;
cancel_delayed_work(&priv->watch_dog_wq);
cancel_delayed_work(&priv->update_beacon_wq);
cancel_work_sync(&priv->qos_activate);
- //cancel_work_sync(&priv->SetBWModeWorkItem);
- //cancel_work_sync(&priv->SwChnlWorkItem);
-
}
struct net_device *dev = usb_get_intfdata(intf);
struct r8192_priv *priv = ieee80211_priv(dev);
- if (dev){
+ if (dev) {
unregister_netdev(dev);
RT_TRACE(COMP_DOWN, "=============>wlan driver to be removed\n");
rtl8192_proc_remove_one(dev);
- rtl8192_down(dev);
+ rtl8192_down(dev);
kfree(priv->pFirmware);
priv->pFirmware = NULL;
- // priv->rf_close(dev);
-// rtl8192_SetRFPowerState(dev, eRfOff);
rtl8192_usb_deleteendpoints(dev);
destroy_workqueue(priv->priv_wq);
- //rtl8192_irq_disable(dev);
- //rtl8192_reset(dev);
mdelay(10);
}
#ifdef CONFIG_IEEE80211_DEBUG
ret = ieee80211_debug_init();
if (ret) {
- printk(KERN_ERR "ieee80211_debug_init() failed %d\n", ret);
+ pr_err("ieee80211_debug_init() failed %d\n", ret);
return ret;
}
#endif
ret = ieee80211_crypto_init();
if (ret) {
- printk(KERN_ERR "ieee80211_crypto_init() failed %d\n", ret);
+ pr_err("ieee80211_crypto_init() failed %d\n", ret);
return ret;
}
ret = ieee80211_crypto_tkip_init();
if (ret) {
- printk(KERN_ERR "ieee80211_crypto_tkip_init() failed %d\n",
- ret);
+ pr_err("ieee80211_crypto_tkip_init() failed %d\n", ret);
return ret;
}
ret = ieee80211_crypto_ccmp_init();
if (ret) {
- printk(KERN_ERR "ieee80211_crypto_ccmp_init() failed %d\n",
- ret);
+ pr_err("ieee80211_crypto_ccmp_init() failed %d\n", ret);
return ret;
}
ret = ieee80211_crypto_wep_init();
if (ret) {
- printk(KERN_ERR "ieee80211_crypto_wep_init() failed %d\n", ret);
+ pr_err("ieee80211_crypto_wep_init() failed %d\n", ret);
return ret;
}
- printk(KERN_INFO "\nLinux kernel driver for RTL8192 based WLAN cards\n");
- printk(KERN_INFO "Copyright (c) 2007-2008, Realsil Wlan\n");
+ pr_info("\nLinux kernel driver for RTL8192 based WLAN cards\n");
+ pr_info("Copyright (c) 2007-2008, Realsil Wlan\n");
RT_TRACE(COMP_INIT, "Initializing module");
RT_TRACE(COMP_INIT, "Wireless extensions version %d", WIRELESS_EXT);
rtl8192_proc_module_init();
usb_deregister(&rtl8192_usb_driver);
RT_TRACE(COMP_DOWN, "Exiting");
-// rtl8192_proc_module_remove();
}
{
u8 SECR_value = 0x0;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- struct ieee80211_device *ieee = priv->ieee80211;
+ struct ieee80211_device *ieee = priv->ieee80211;
SECR_value = SCR_TxEncEnable | SCR_RxDecEnable;
- if (((KEY_TYPE_WEP40 == ieee->pairwise_key_type) || (KEY_TYPE_WEP104 == ieee->pairwise_key_type)) && (priv->ieee80211->auth_mode != 2))
- {
+ if (((KEY_TYPE_WEP40 == ieee->pairwise_key_type) || (KEY_TYPE_WEP104 == ieee->pairwise_key_type)) && (priv->ieee80211->auth_mode != 2)) {
SECR_value |= SCR_RxUseDK;
SECR_value |= SCR_TxUseDK;
- }
- else if ((ieee->iw_mode == IW_MODE_ADHOC) && (ieee->pairwise_key_type & (KEY_TYPE_CCMP | KEY_TYPE_TKIP)))
- {
+ } else if ((ieee->iw_mode == IW_MODE_ADHOC) && (ieee->pairwise_key_type & (KEY_TYPE_CCMP | KEY_TYPE_TKIP))) {
SECR_value |= SCR_RxUseDK;
SECR_value |= SCR_TxUseDK;
}
//add HWSec active enable here.
-//default using hwsec. when peer AP is in N mode only and pairwise_key_type is none_aes(which HT_IOT_ACT_PURE_N_MODE indicates it), use software security. when peer AP is in b,g,n mode mixed and pairwise_key_type is none_aes, use g mode hw security. WB on 2008.7.4
+ //default using hwsec. when peer AP is in N mode only and pairwise_key_type is none_aes(which HT_IOT_ACT_PURE_N_MODE indicates it), use software security. when peer AP is in b,g,n mode mixed and pairwise_key_type is none_aes, use g mode hw security. WB on 2008.7.4
ieee->hwsec_active = 1;
- if ((ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE) || !hwwep)//!ieee->hwsec_support) //add hwsec_support flag to totol control hw_sec on/off
- {
+ if ((ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE) || !hwwep) { //add hwsec_support flag to totol control hw_sec on/off
ieee->hwsec_active = 0;
SECR_value &= ~SCR_RxDecEnable;
}
- RT_TRACE(COMP_SEC, "%s:, hwsec:%d, pairwise_key:%d, SECR_value:%x\n", __func__, \
- ieee->hwsec_active, ieee->pairwise_key_type, SECR_value);
- {
- write_nic_byte(dev, SECR, SECR_value);//SECR_value | SCR_UseDK );
- }
+ RT_TRACE(COMP_SEC, "%s:, hwsec:%d, pairwise_key:%d, SECR_value:%x\n", __func__,
+ ieee->hwsec_active, ieee->pairwise_key_type, SECR_value);
+ write_nic_byte(dev, SECR, SECR_value);
}
-void setKey(struct net_device *dev,
- u8 EntryNo,
- u8 KeyIndex,
- u16 KeyType,
- u8 *MacAddr,
- u8 DefaultKey,
- u32 *KeyContent)
+void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType,
+ u8 *MacAddr, u8 DefaultKey, u32 *KeyContent)
{
u32 TargetCommand = 0;
u32 TargetContent = 0;
usConfig |= BIT15 | (KeyType<<2);
else
usConfig |= BIT15 | (KeyType<<2) | KeyIndex;
-// usConfig |= BIT15 | (KeyType<<2) | (DefaultKey<<5) | KeyIndex;
- for (i = 0; i < CAM_CONTENT_COUNT; i++){
+ for (i = 0; i < CAM_CONTENT_COUNT; i++) {
TargetCommand = i+CAM_CONTENT_COUNT*EntryNo;
TargetCommand |= BIT31|BIT16;
- if (i == 0){//MAC|Config
+ if (i == 0) { //MAC|Config
TargetContent = (u32)(*(MacAddr+0)) << 16|
(u32)(*(MacAddr+1)) << 24|
(u32)usConfig;
write_nic_dword(dev, WCAMI, TargetContent);
write_nic_dword(dev, RWCAM, TargetCommand);
- // printk("setkey cam =%8x\n", read_cam(dev, i+6*EntryNo));
- }
- else if (i == 1){//MAC
+ } else if (i == 1) { //MAC
TargetContent = (u32)(*(MacAddr+2)) |
(u32)(*(MacAddr+3)) << 8|
(u32)(*(MacAddr+4)) << 16|
(u32)(*(MacAddr+5)) << 24;
write_nic_dword(dev, WCAMI, TargetContent);
write_nic_dword(dev, RWCAM, TargetCommand);
- }
- else {
+ } else {
//Key Material
- if (KeyContent != NULL){
- write_nic_dword(dev, WCAMI, (u32)(*(KeyContent+i-2)));
- write_nic_dword(dev, RWCAM, TargetCommand);
+ if (KeyContent != NULL) {
+ write_nic_dword(dev, WCAMI, (u32)(*(KeyContent+i-2)));
+ write_nic_dword(dev, RWCAM, TargetCommand);
+ }
}
}
- }
}
projects / karo-tx-linux.git / blobdiff