* USA.
*/
-#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
#include "usbip_common.h"
#include "vhci.h"
-#define DRIVER_VERSION "1.0"
#define DRIVER_AUTHOR "Takahiro Hirofuchi"
-#define DRIVER_DESC "Virtual Host Controller Interface Driver for USB/IP"
-#define DRIVER_LICENCE "GPL"
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENCE);
-
-
+#define DRIVER_DESC "USB/IP 'Virtual' Host Controller (VHCI) Driver"
/*
* TODO
* - clean up everything
*/
-
/* See usb gadget dummy hcd */
-
static int vhci_hub_status(struct usb_hcd *hcd, char *buff);
static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
- u16 wIndex, char *buff, u16 wLength);
+ u16 wIndex, char *buff, u16 wLength);
static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
- gfp_t mem_flags);
+ gfp_t mem_flags);
static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
static int vhci_start(struct usb_hcd *vhci_hcd);
static void vhci_stop(struct usb_hcd *hcd);
struct vhci_hcd *the_controller;
-static const char *bit_desc[] = {
+static const char * const bit_desc[] = {
"CONNECTION", /*0*/
"ENABLE", /*1*/
"SUSPEND", /*2*/
"OVER_CURRENT", /*3*/
"RESET", /*4*/
- "R5", /*5*/
- "R6", /*6*/
- "R7", /*7*/
+ "R5", /*5*/
+ "R6", /*6*/
+ "R7", /*7*/
"POWER", /*8*/
"LOWSPEED", /*9*/
"HIGHSPEED", /*10*/
"PORT_TEST", /*11*/
"INDICATOR", /*12*/
- "R13", /*13*/
- "R14", /*14*/
- "R15", /*15*/
+ "R13", /*13*/
+ "R14", /*14*/
+ "R15", /*15*/
"C_CONNECTION", /*16*/
"C_ENABLE", /*17*/
"C_SUSPEND", /*18*/
"C_OVER_CURRENT", /*19*/
"C_RESET", /*20*/
- "R21", /*21*/
- "R22", /*22*/
- "R23", /*23*/
- "R24", /*24*/
- "R25", /*25*/
- "R26", /*26*/
- "R27", /*27*/
- "R28", /*28*/
- "R29", /*29*/
- "R30", /*30*/
- "R31", /*31*/
+ "R21", /*21*/
+ "R22", /*22*/
+ "R23", /*23*/
+ "R24", /*24*/
+ "R25", /*25*/
+ "R26", /*26*/
+ "R27", /*27*/
+ "R28", /*28*/
+ "R29", /*29*/
+ "R30", /*30*/
+ "R31", /*31*/
};
-
static void dump_port_status(u32 status)
{
int i = 0;
- printk(KERN_DEBUG "status %08x:", status);
+ pr_debug("status %08x:", status);
for (i = 0; i < 32; i++) {
if (status & (1 << i))
- printk(" %s", bit_desc[i]);
+ pr_debug(" %s", bit_desc[i]);
}
-
- printk("\n");
+ pr_debug("\n");
}
-
-
void rh_port_connect(int rhport, enum usb_device_speed speed)
{
unsigned long flags;
the_controller->port_status[rhport] |=
(1 << USB_PORT_FEAT_C_CONNECTION);
-
/* not yet complete the disconnection
* spin_lock(&vdev->ud.lock);
* vdev->ud.status = VHC_ST_DISCONNECT;
* spin_unlock(&vdev->ud.lock); */
spin_unlock_irqrestore(&the_controller->lock, flags);
-
usb_hcd_poll_rh_status(vhci_to_hcd(the_controller));
}
-
-
-/*----------------------------------------------------------------------*/
-
-#define PORT_C_MASK \
- ((USB_PORT_STAT_C_CONNECTION \
- | USB_PORT_STAT_C_ENABLE \
- | USB_PORT_STAT_C_SUSPEND \
- | USB_PORT_STAT_C_OVERCURRENT \
+#define PORT_C_MASK \
+ ((USB_PORT_STAT_C_CONNECTION \
+ | USB_PORT_STAT_C_ENABLE \
+ | USB_PORT_STAT_C_SUSPEND \
+ | USB_PORT_STAT_C_OVERCURRENT \
| USB_PORT_STAT_C_RESET) << 16)
/*
int rhport;
int changed = 0;
-
*event_bits = 0;
vhci = hcd_to_vhci(hcd);
}
}
- usbip_uinfo("changed %d\n", changed);
+ pr_info("changed %d\n", changed);
if (hcd->state == HC_STATE_SUSPENDED)
usb_hcd_resume_root_hub(hcd);
* wIndex shows the port number and begins from 1.
*/
usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue,
- wIndex);
+ wIndex);
if (wIndex > VHCI_NPORTS)
- printk(KERN_ERR "%s: invalid port number %d\n", __func__,
- wIndex);
+ pr_err("invalid port number %d\n", wIndex);
rhport = ((__u8)(wIndex & 0x00ff)) - 1;
dum = hcd_to_vhci(hcd);
break;
case USB_PORT_FEAT_POWER:
usbip_dbg_vhci_rh(" ClearPortFeature: "
- "USB_PORT_FEAT_POWER\n");
+ "USB_PORT_FEAT_POWER\n");
dum->port_status[rhport] = 0;
/* dum->address = 0; */
/* dum->hdev = 0; */
break;
case USB_PORT_FEAT_C_RESET:
usbip_dbg_vhci_rh(" ClearPortFeature: "
- "USB_PORT_FEAT_C_RESET\n");
+ "USB_PORT_FEAT_C_RESET\n");
switch (dum->vdev[rhport].speed) {
case USB_SPEED_HIGH:
dum->port_status[rhport] |=
- USB_PORT_STAT_HIGH_SPEED;
+ USB_PORT_STAT_HIGH_SPEED;
break;
case USB_SPEED_LOW:
dum->port_status[rhport] |=
- USB_PORT_STAT_LOW_SPEED;
+ USB_PORT_STAT_LOW_SPEED;
break;
default:
break;
}
default:
usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
- wValue);
+ wValue);
dum->port_status[rhport] &= ~(1 << wValue);
+ break;
}
break;
case GetHubDescriptor:
case GetPortStatus:
usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex);
if (wIndex > VHCI_NPORTS || wIndex < 1) {
- printk(KERN_ERR "%s: invalid port number %d\n",
- __func__, wIndex);
+ pr_err("invalid port number %d\n", wIndex);
retval = -EPIPE;
}
* complete it!!
* */
if (dum->resuming && time_after(jiffies, dum->re_timeout)) {
- printk(KERN_ERR "%s: not yet\n", __func__);
dum->port_status[rhport] |=
(1 << USB_PORT_FEAT_C_SUSPEND);
dum->port_status[rhport] &=
}
if ((dum->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) !=
- 0 && time_after(jiffies, dum->re_timeout)) {
+ 0 && time_after(jiffies, dum->re_timeout)) {
dum->port_status[rhport] |=
- (1 << USB_PORT_FEAT_C_RESET);
+ (1 << USB_PORT_FEAT_C_RESET);
dum->port_status[rhport] &=
- ~(1 << USB_PORT_FEAT_RESET);
+ ~(1 << USB_PORT_FEAT_RESET);
dum->re_timeout = 0;
if (dum->vdev[rhport].ud.status ==
- VDEV_ST_NOTASSIGNED) {
+ VDEV_ST_NOTASSIGNED) {
usbip_dbg_vhci_rh(" enable rhport %d "
- "(status %u)\n",
- rhport,
- dum->vdev[rhport].ud.status);
+ "(status %u)\n",
+ rhport,
+ dum->vdev[rhport].ud.status);
dum->port_status[rhport] |=
- USB_PORT_STAT_ENABLE;
+ USB_PORT_STAT_ENABLE;
}
#if 0
if (dum->driver) {
-
dum->port_status[rhport] |=
- USB_PORT_STAT_ENABLE;
+ USB_PORT_STAT_ENABLE;
/* give it the best speed we agree on */
dum->gadget.speed = dum->driver->speed;
dum->gadget.ep0->maxpacket = 64;
switch (dum->gadget.speed) {
case USB_SPEED_HIGH:
dum->port_status[rhport] |=
- USB_PORT_STAT_HIGH_SPEED;
+ USB_PORT_STAT_HIGH_SPEED;
break;
case USB_SPEED_LOW:
dum->gadget.ep0->maxpacket = 8;
dum->port_status[rhport] |=
- USB_PORT_STAT_LOW_SPEED;
+ USB_PORT_STAT_LOW_SPEED;
break;
default:
dum->gadget.speed = USB_SPEED_FULL;
}
}
#endif
-
}
((u16 *) buf)[0] = cpu_to_le16(dum->port_status[rhport]);
- ((u16 *) buf)[1] =
- cpu_to_le16(dum->port_status[rhport] >> 16);
+ ((u16 *) buf)[1] = cpu_to_le16(dum->port_status[rhport] >> 16);
usbip_dbg_vhci_rh(" GetPortStatus bye %x %x\n", ((u16 *)buf)[0],
- ((u16 *)buf)[1]);
+ ((u16 *)buf)[1]);
break;
case SetHubFeature:
usbip_dbg_vhci_rh(" SetHubFeature\n");
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
usbip_dbg_vhci_rh(" SetPortFeature: "
- "USB_PORT_FEAT_SUSPEND\n");
- printk(KERN_ERR "%s: not yet\n", __func__);
+ "USB_PORT_FEAT_SUSPEND\n");
#if 0
dum->port_status[rhport] |=
- (1 << USB_PORT_FEAT_SUSPEND);
+ (1 << USB_PORT_FEAT_SUSPEND);
if (dum->driver->suspend) {
spin_unlock(&dum->lock);
dum->driver->suspend(&dum->gadget);
break;
case USB_PORT_FEAT_RESET:
usbip_dbg_vhci_rh(" SetPortFeature: "
- "USB_PORT_FEAT_RESET\n");
+ "USB_PORT_FEAT_RESET\n");
/* if it's already running, disconnect first */
if (dum->port_status[rhport] & USB_PORT_STAT_ENABLE) {
dum->port_status[rhport] &=
- ~(USB_PORT_STAT_ENABLE |
- USB_PORT_STAT_LOW_SPEED |
- USB_PORT_STAT_HIGH_SPEED);
+ ~(USB_PORT_STAT_ENABLE |
+ USB_PORT_STAT_LOW_SPEED |
+ USB_PORT_STAT_HIGH_SPEED);
#if 0
if (dum->driver) {
dev_dbg(hardware, "disconnect\n");
/* FALLTHROUGH */
default:
usbip_dbg_vhci_rh(" SetPortFeature: default %d\n",
- wValue);
+ wValue);
dum->port_status[rhport] |= (1 << wValue);
+ break;
}
break;
default:
- printk(KERN_ERR "%s: default: no such request\n", __func__);
+ pr_err("default: no such request\n");
/* dev_dbg (hardware,
* "hub control req%04x v%04x i%04x l%d\n",
* typeReq, wValue, wIndex, wLength); */
}
if (usbip_dbg_flag_vhci_rh) {
- printk(KERN_DEBUG "port %d\n", rhport);
+ pr_debug("port %d\n", rhport);
dump_port_status(prev_port_status[rhport]);
dump_port_status(dum->port_status[rhport]);
}
return retval;
}
-
-
-/*----------------------------------------------------------------------*/
-
static struct vhci_device *get_vdev(struct usb_device *udev)
{
int i;
unsigned long flag;
if (!vdev) {
- err("could not get virtual device");
+ pr_err("could not get virtual device");
/* BUG(); */
return;
}
priv->seqnum = atomic_inc_return(&the_controller->seqnum);
if (priv->seqnum == 0xffff)
- usbip_uinfo("seqnum max\n");
+ dev_info(&urb->dev->dev, "seqnum max\n");
priv->vdev = vdev;
priv->urb = urb;
urb->hcpriv = (void *) priv;
-
list_add_tail(&priv->list, &vdev->priv_tx);
wake_up(&vdev->waitq_tx);
struct vhci_device *vdev;
usbip_dbg_vhci_hc("enter, usb_hcd %p urb %p mem_flags %d\n",
- hcd, urb, mem_flags);
+ hcd, urb, mem_flags);
/* patch to usb_sg_init() is in 2.5.60 */
BUG_ON(!urb->transfer_buffer && urb->transfer_buffer_length);
/* refuse enqueue for dead connection */
spin_lock(&vdev->ud.lock);
- if (vdev->ud.status == VDEV_ST_NULL || vdev->ud.status == VDEV_ST_ERROR) {
- usbip_uerr("enqueue for inactive port %d\n", vdev->rhport);
+ if (vdev->ud.status == VDEV_ST_NULL ||
+ vdev->ud.status == VDEV_ST_ERROR) {
+ dev_err(dev, "enqueue for inactive port %d\n", vdev->rhport);
spin_unlock(&vdev->ud.lock);
spin_unlock_irqrestore(&the_controller->lock, flags);
return -ENODEV;
* 2. Set_Address request to DevAddr(0) EndPoint(0)
*
*/
-
if (usb_pipedevice(urb->pipe) == 0) {
__u8 type = usb_pipetype(urb->pipe);
struct usb_ctrlrequest *ctrlreq =
- (struct usb_ctrlrequest *) urb->setup_packet;
+ (struct usb_ctrlrequest *) urb->setup_packet;
if (type != PIPE_CONTROL || !ctrlreq) {
dev_err(dev, "invalid request to devnum 0\n");
case USB_REQ_GET_DESCRIPTOR:
if (ctrlreq->wValue == (USB_DT_DEVICE << 8))
usbip_dbg_vhci_hc("Not yet?: "
- "Get_Descriptor to device 0 "
- "(get max pipe size)\n");
+ "Get_Descriptor to device 0 "
+ "(get max pipe size)\n");
if (vdev->udev)
usb_put_dev(vdev->udev);
out:
vhci_tx_urb(urb);
-
spin_unlock_irqrestore(&the_controller->lock, flags);
return 0;
struct vhci_priv *priv;
struct vhci_device *vdev;
- usbip_uinfo("vhci_hcd: dequeue a urb %p\n", urb);
-
+ pr_info("dequeue a urb %p\n", urb);
spin_lock_irqsave(&the_controller->lock, flags);
spin_lock_irqsave(&vdev->priv_lock, flags2);
- usbip_uinfo("vhci_hcd: device %p seems to be disconnected\n",
- vdev);
+ pr_info("device %p seems to be disconnected\n", vdev);
list_del(&priv->list);
kfree(priv);
urb->hcpriv = NULL;
* vhci_rx will receive RET_UNLINK and give back the URB.
* Otherwise, we give back it here.
*/
- usbip_uinfo("vhci_hcd: vhci_urb_dequeue() gives back urb %p\n",
- urb);
+ pr_info("gives back urb %p\n", urb);
usb_hcd_unlink_urb_from_ep(hcd, urb);
spin_unlock_irqrestore(&the_controller->lock, flags);
usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb,
- urb->status);
+ urb->status);
spin_lock_irqsave(&the_controller->lock, flags);
} else {
/* setup CMD_UNLINK pdu */
unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC);
if (!unlink) {
- usbip_uerr("malloc vhci_unlink\n");
+ pr_err("malloc vhci_unlink\n");
spin_unlock_irqrestore(&vdev->priv_lock, flags2);
spin_unlock_irqrestore(&the_controller->lock, flags);
usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
unlink->seqnum = atomic_inc_return(&the_controller->seqnum);
if (unlink->seqnum == 0xffff)
- usbip_uinfo("seqnum max\n");
+ pr_info("seqnum max\n");
unlink->unlink_seqnum = priv->seqnum;
- usbip_uinfo("vhci_hcd: device %p seems to be still connected\n",
- vdev);
+ pr_info("device %p seems to be still connected\n", vdev);
/* send cmd_unlink and try to cancel the pending URB in the
* peer */
spin_lock(&vdev->priv_lock);
list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) {
- usbip_uinfo("unlink cleanup tx %lu\n", unlink->unlink_seqnum);
+ pr_info("unlink cleanup tx %lu\n", unlink->unlink_seqnum);
list_del(&unlink->list);
kfree(unlink);
}
struct urb *urb;
/* give back URB of unanswered unlink request */
- usbip_uinfo("unlink cleanup rx %lu\n", unlink->unlink_seqnum);
+ pr_info("unlink cleanup rx %lu\n", unlink->unlink_seqnum);
urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum);
if (!urb) {
- usbip_uinfo("the urb (seqnum %lu) was already given back\n",
- unlink->unlink_seqnum);
+ pr_info("the urb (seqnum %lu) was already given back\n",
+ unlink->unlink_seqnum);
list_del(&unlink->list);
kfree(unlink);
continue;
usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb);
spin_unlock(&the_controller->lock);
- usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status);
+ usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb,
+ urb->status);
list_del(&unlink->list);
kfree(unlink);
/* need this? see stub_dev.c */
if (ud->tcp_socket) {
- usbip_udbg("shutdown tcp_socket %p\n", ud->tcp_socket);
+ pr_debug("shutdown tcp_socket %p\n", ud->tcp_socket);
kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR);
}
if (vdev->ud.tcp_tx)
kthread_stop(vdev->ud.tcp_tx);
- usbip_uinfo("stop threads\n");
+ pr_info("stop threads\n");
/* active connection is closed */
if (vdev->ud.tcp_socket != NULL) {
sock_release(vdev->ud.tcp_socket);
vdev->ud.tcp_socket = NULL;
}
- usbip_uinfo("release socket\n");
+ pr_info("release socket\n");
vhci_device_unlink_cleanup(vdev);
*/
rh_port_disconnect(vdev->rhport);
- usbip_uinfo("disconnect device\n");
+ pr_info("disconnect device\n");
}
vdev->udev = NULL;
ud->tcp_socket = NULL;
-
ud->status = VDEV_ST_NULL;
spin_unlock(&ud->lock);
static void vhci_device_unusable(struct usbip_device *ud)
{
spin_lock(&ud->lock);
-
ud->status = VDEV_ST_ERROR;
-
spin_unlock(&ud->lock);
}
usbip_start_eh(&vdev->ud);
}
-
-/*----------------------------------------------------------------------*/
-
static int vhci_start(struct usb_hcd *hcd)
{
struct vhci_hcd *vhci = hcd_to_vhci(hcd);
usbip_dbg_vhci_hc("enter vhci_start\n");
-
/* initialize private data of usb_hcd */
for (rhport = 0; rhport < VHCI_NPORTS; rhport++) {
atomic_set(&vhci->seqnum, 0);
spin_lock_init(&vhci->lock);
-
-
hcd->power_budget = 0; /* no limit */
hcd->state = HC_STATE_RUNNING;
hcd->uses_new_polling = 1;
-
/* vhci_hcd is now ready to be controlled through sysfs */
err = sysfs_create_group(&vhci_dev(vhci)->kobj, &dev_attr_group);
if (err) {
- usbip_uerr("create sysfs files\n");
+ pr_err("create sysfs files\n");
return err;
}
usbip_dbg_vhci_hc("stop VHCI controller\n");
-
/* 1. remove the userland interface of vhci_hcd */
sysfs_remove_group(&vhci_dev(vhci)->kobj, &dev_attr_group);
usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED);
usbip_stop_eh(&vdev->ud);
}
-
-
- usbip_uinfo("vhci_stop done\n");
}
-/*----------------------------------------------------------------------*/
-
static int vhci_get_frame_number(struct usb_hcd *hcd)
{
- usbip_uerr("Not yet implemented\n");
+ pr_err("Not yet implemented\n");
return 0;
}
-
#ifdef CONFIG_PM
/* FIXME: suspend/resume */
#define vhci_bus_resume NULL
#endif
-
-
static struct hc_driver vhci_hc_driver = {
.description = driver_name,
.product_desc = driver_desc,
struct usb_hcd *hcd;
int ret;
- usbip_uinfo("proving...\n");
-
usbip_dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id);
/* will be removed */
*/
hcd = usb_create_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
- usbip_uerr("create hcd failed\n");
+ pr_err("create hcd failed\n");
return -ENOMEM;
}
hcd->has_tt = 1;
*/
ret = usb_add_hcd(hcd, 0, 0);
if (ret != 0) {
- usbip_uerr("usb_add_hcd failed %d\n", ret);
+ pr_err("usb_add_hcd failed %d\n", ret);
usb_put_hcd(hcd);
the_controller = NULL;
return ret;
}
-
usbip_dbg_vhci_hc("bye\n");
return 0;
}
-
static int vhci_hcd_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd;
usb_put_hcd(hcd);
the_controller = NULL;
-
return 0;
}
-
-
#ifdef CONFIG_PM
/* what should happen for USB/IP under suspend/resume? */
int connected = 0;
int ret = 0;
- dev_dbg(&pdev->dev, "%s\n", __func__);
-
hcd = platform_get_drvdata(pdev);
spin_lock(&the_controller->lock);
for (rhport = 0; rhport < VHCI_NPORTS; rhport++)
if (the_controller->port_status[rhport] &
- USB_PORT_STAT_CONNECTION)
+ USB_PORT_STAT_CONNECTION)
connected += 1;
spin_unlock(&the_controller->lock);
if (connected > 0) {
- usbip_uinfo("We have %d active connection%s. Do not suspend.\n",
- connected, (connected == 1 ? "" : "s"));
+ dev_info(&pdev->dev, "We have %d active connection%s. Do not "
+ "suspend.\n", connected, (connected == 1 ? "" : "s"));
ret = -EBUSY;
} else {
- usbip_uinfo("suspend vhci_hcd");
+ dev_info(&pdev->dev, "suspend vhci_hcd");
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
}
#endif
-
static struct platform_driver vhci_driver = {
.probe = vhci_hcd_probe,
.remove = __devexit_p(vhci_hcd_remove),
},
};
-/*----------------------------------------------------------------------*/
-
/*
* The VHCI 'device' is 'virtual'; not a real plug&play hardware.
* We need to add this virtual device as a platform device arbitrarily:
{
int ret;
- usbip_dbg_vhci_hc("enter\n");
if (usb_disabled())
return -ENODEV;
- printk(KERN_INFO KBUILD_MODNAME ": %s, %s\n", driver_name,
- DRIVER_VERSION);
-
ret = platform_driver_register(&vhci_driver);
if (ret < 0)
goto err_driver_register;
if (ret < 0)
goto err_platform_device_register;
- usbip_dbg_vhci_hc("bye\n");
+ pr_info(DRIVER_DESC " v" USBIP_VERSION "\n");
return ret;
- /* error occurred */
err_platform_device_register:
platform_driver_unregister(&vhci_driver);
-
err_driver_register:
- usbip_dbg_vhci_hc("bye\n");
return ret;
}
-module_init(vhci_init);
static void __exit vhci_cleanup(void)
{
- usbip_dbg_vhci_hc("enter\n");
-
platform_device_unregister(&the_pdev);
platform_driver_unregister(&vhci_driver);
-
- usbip_dbg_vhci_hc("bye\n");
}
+
+module_init(vhci_init);
module_exit(vhci_cleanup);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(USBIP_VERSION);
projects / mv-sheeva.git / blobdiff