}
}
+/**
+ * dwc2_hcd_connect() - Handles connect of the HCD
+ *
+ * @hsotg: Pointer to struct dwc2_hsotg
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+void dwc2_hcd_connect(struct dwc2_hsotg *hsotg)
+{
+ if (hsotg->lx_state != DWC2_L0)
+ usb_hcd_resume_root_hub(hsotg->priv);
+
+ hsotg->flags.b.port_connect_status_change = 1;
+ hsotg->flags.b.port_connect_status = 1;
+}
+
/**
* dwc2_hcd_disconnect() - Handles disconnect of the HCD
*
* @hsotg: Pointer to struct dwc2_hsotg
+ * @force: If true, we won't try to reconnect even if we see device connected.
*
* Must be called with interrupt disabled and spinlock held
*/
-void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg)
+void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force)
{
u32 intr;
+ u32 hprt0;
/* Set status flags for the hub driver */
hsotg->flags.b.port_connect_status_change = 1;
dwc2_hcd_cleanup_channels(hsotg);
dwc2_host_disconnect(hsotg);
+
+ /*
+ * Add an extra check here to see if we're actually connected but
+ * we don't have a detection interrupt pending. This can happen if:
+ * 1. hardware sees connect
+ * 2. hardware sees disconnect
+ * 3. hardware sees connect
+ * 4. dwc2_port_intr() - clears connect interrupt
+ * 5. dwc2_handle_common_intr() - calls here
+ *
+ * Without the extra check here we will end calling disconnect
+ * and won't get any future interrupts to handle the connect.
+ */
+ if (!force) {
+ hprt0 = dwc2_readl(hsotg->regs + HPRT0);
+ if (!(hprt0 & HPRT0_CONNDET) && (hprt0 & HPRT0_CONNSTS))
+ dwc2_hcd_connect(hsotg);
+ }
}
/**
*/
chan->multi_count = dwc2_hb_mult(qh->maxp);
- if (hsotg->core_params->dma_desc_enable > 0)
+ if (hsotg->core_params->dma_desc_enable > 0) {
chan->desc_list_addr = qh->desc_list_dma;
+ chan->desc_list_sz = qh->desc_list_sz;
+ }
dwc2_hc_init(hsotg, chan);
chan->qh = qh;
dev_err(hsotg->dev,
"Connection id status change timed out\n");
hsotg->op_state = OTG_STATE_B_PERIPHERAL;
- dwc2_core_init(hsotg, false, -1);
+ dwc2_core_init(hsotg, false);
dwc2_enable_global_interrupts(hsotg);
spin_lock_irqsave(&hsotg->lock, flags);
dwc2_hsotg_core_init_disconnected(hsotg, false);
hsotg->op_state = OTG_STATE_A_HOST;
/* Initialize the Core for Host mode */
- dwc2_core_init(hsotg, false, -1);
+ dwc2_core_init(hsotg, false);
dwc2_enable_global_interrupts(hsotg);
dwc2_hcd_start(hsotg);
}
port_status |= USB_PORT_STAT_TEST;
/* USB_PORT_FEAT_INDICATOR unsupported always 0 */
+ if (hsotg->core_params->dma_desc_fs_enable) {
+ /*
+ * Enable descriptor DMA only if a full speed
+ * device is connected.
+ */
+ if (hsotg->new_connection &&
+ ((port_status &
+ (USB_PORT_STAT_CONNECTION |
+ USB_PORT_STAT_HIGH_SPEED |
+ USB_PORT_STAT_LOW_SPEED)) ==
+ USB_PORT_STAT_CONNECTION)) {
+ u32 hcfg;
+
+ dev_info(hsotg->dev, "Enabling descriptor DMA mode\n");
+ hsotg->core_params->dma_desc_enable = 1;
+ hcfg = dwc2_readl(hsotg->regs + HCFG);
+ hcfg |= HCFG_DESCDMA;
+ dwc2_writel(hcfg, hsotg->regs + HCFG);
+ hsotg->new_connection = false;
+ }
+ }
+
dev_vdbg(hsotg->dev, "port_status=%08x\n", port_status);
*(__le32 *)buf = cpu_to_le32(port_status);
break;
{
struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
reset_work.work);
+ unsigned long flags;
u32 hprt0;
dev_dbg(hsotg->dev, "USB RESET function called\n");
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+
hprt0 = dwc2_read_hprt0(hsotg);
hprt0 &= ~HPRT0_RST;
dwc2_writel(hprt0, hsotg->regs + HPRT0);
hsotg->flags.b.port_reset_change = 1;
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
}
/*
spin_lock_irqsave(&hsotg->lock, flags);
/* Ensure hcd is disconnected */
- dwc2_hcd_disconnect(hsotg);
+ dwc2_hcd_disconnect(hsotg, true);
dwc2_hcd_stop(hsotg);
hsotg->lx_state = DWC2_L3;
hcd->state = HC_STATE_HALT;
dwc2_disable_global_interrupts(hsotg);
/* Initialize the DWC_otg core, and select the Phy type */
- retval = dwc2_core_init(hsotg, true, irq);
+ retval = dwc2_core_init(hsotg, true);
if (retval)
goto error2;
if (!hsotg->status_buf)
goto error3;
+ /*
+ * Create kmem caches to handle descriptor buffers in descriptor
+ * DMA mode.
+ * Alignment must be set to 512 bytes.
+ */
+ if (hsotg->core_params->dma_desc_enable ||
+ hsotg->core_params->dma_desc_fs_enable) {
+ hsotg->desc_gen_cache = kmem_cache_create("dwc2-gen-desc",
+ sizeof(struct dwc2_hcd_dma_desc) *
+ MAX_DMA_DESC_NUM_GENERIC, 512, SLAB_CACHE_DMA,
+ NULL);
+ if (!hsotg->desc_gen_cache) {
+ dev_err(hsotg->dev,
+ "unable to create dwc2 generic desc cache\n");
+
+ /*
+ * Disable descriptor dma mode since it will not be
+ * usable.
+ */
+ hsotg->core_params->dma_desc_enable = 0;
+ hsotg->core_params->dma_desc_fs_enable = 0;
+ }
+
+ hsotg->desc_hsisoc_cache = kmem_cache_create("dwc2-hsisoc-desc",
+ sizeof(struct dwc2_hcd_dma_desc) *
+ MAX_DMA_DESC_NUM_HS_ISOC, 512, 0, NULL);
+ if (!hsotg->desc_hsisoc_cache) {
+ dev_err(hsotg->dev,
+ "unable to create dwc2 hs isoc desc cache\n");
+
+ kmem_cache_destroy(hsotg->desc_gen_cache);
+
+ /*
+ * Disable descriptor dma mode since it will not be
+ * usable.
+ */
+ hsotg->core_params->dma_desc_enable = 0;
+ hsotg->core_params->dma_desc_fs_enable = 0;
+ }
+ }
+
hsotg->otg_port = 1;
hsotg->frame_list = NULL;
hsotg->frame_list_dma = 0;
*/
retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (retval < 0)
- goto error3;
+ goto error4;
device_wakeup_enable(hcd->self.controller);
return 0;
+error4:
+ kmem_cache_destroy(hsotg->desc_gen_cache);
+ kmem_cache_destroy(hsotg->desc_hsisoc_cache);
error3:
dwc2_hcd_release(hsotg);
error2:
usb_remove_hcd(hcd);
hsotg->priv = NULL;
+
+ kmem_cache_destroy(hsotg->desc_gen_cache);
+ kmem_cache_destroy(hsotg->desc_hsisoc_cache);
+
dwc2_hcd_release(hsotg);
usb_put_hcd(hcd);
projects / karo-tx-linux.git / blobdiff