#include "pci-quirks.h"
static void ohci_dump (struct ohci_hcd *ohci, int verbose);
-static int ohci_init (struct ohci_hcd *ohci);
static void ohci_stop (struct usb_hcd *hcd);
-#if defined(CONFIG_PM) || defined(CONFIG_PCI)
-static int ohci_restart (struct ohci_hcd *ohci);
-#endif
-
-#ifdef CONFIG_PCI
-static void sb800_prefetch(struct ohci_hcd *ohci, int on);
-#else
-static inline void sb800_prefetch(struct ohci_hcd *ohci, int on)
-{
- return;
-}
-#endif
-
-
#include "ohci-hub.c"
#include "ohci-dbg.c"
#include "ohci-mem.c"
urb->start_frame = frame;
}
} else if (ed->type == PIPE_ISOCHRONOUS) {
- u16 next = ohci_frame_no(ohci) + 2;
+ u16 next = ohci_frame_no(ohci) + 1;
u16 frame = ed->last_iso + ed->interval;
/* Behind the scheduling threshold? */
if (unlikely(tick_before(frame, next))) {
/* USB_ISO_ASAP: Round up to the first available slot */
- if (urb->transfer_flags & URB_ISO_ASAP)
+ if (urb->transfer_flags & URB_ISO_ASAP) {
frame += (next - frame + ed->interval - 1) &
-ed->interval;
* Not ASAP: Use the next slot in the stream. If
* the entire URB falls before the threshold, fail.
*/
- else if (tick_before(frame + ed->interval *
+ } else {
+ if (tick_before(frame + ed->interval *
(urb->number_of_packets - 1), next)) {
- retval = -EXDEV;
- usb_hcd_unlink_urb_from_ep(hcd, urb);
- goto fail;
- }
+ retval = -EXDEV;
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ goto fail;
+ }
- /*
- * Some OHCI hardware doesn't handle late TDs
- * correctly. After retiring them it proceeds to
- * the next ED instead of the next TD. Therefore
- * we have to omit the late TDs entirely.
- */
- urb_priv->td_cnt = DIV_ROUND_UP(next - frame,
- ed->interval);
+ /*
+ * Some OHCI hardware doesn't handle late TDs
+ * correctly. After retiring them it proceeds
+ * to the next ED instead of the next TD.
+ * Therefore we have to omit the late TDs
+ * entirely.
+ */
+ urb_priv->td_cnt = DIV_ROUND_UP(
+ (u16) (next - frame),
+ ed->interval);
+ }
}
urb->start_frame = frame;
}
return 0;
}
+/* ohci_setup routine for generic controller initialization */
+
+int ohci_setup(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+ ohci_hcd_init(ohci);
+
+ return ohci_init(ohci);
+}
+EXPORT_SYMBOL_GPL(ohci_setup);
+
+/* ohci_start routine for generic controller start of all OHCI bus glue */
+static int ohci_start(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int ret;
+
+ ret = ohci_run(ohci);
+ if (ret < 0) {
+ ohci_err(ohci, "can't start\n");
+ ohci_stop(hcd);
+ }
+ return ret;
+}
+
/*-------------------------------------------------------------------------*/
/* an interrupt happens */
#if defined(CONFIG_PM) || defined(CONFIG_PCI)
/* must not be called from interrupt context */
-static int ohci_restart (struct ohci_hcd *ohci)
+int ohci_restart(struct ohci_hcd *ohci)
{
int temp;
int i;
struct urb_priv *priv;
+ ohci_init(ohci);
spin_lock_irq(&ohci->lock);
ohci->rh_state = OHCI_RH_HALTED;
ohci_dbg(ohci, "restart complete\n");
return 0;
}
+EXPORT_SYMBOL_GPL(ohci_restart);
#endif
#ifdef CONFIG_PM
-static int __maybe_unused ohci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+int ohci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
unsigned long flags;
return 0;
}
+EXPORT_SYMBOL_GPL(ohci_suspend);
-static int __maybe_unused ohci_resume(struct usb_hcd *hcd, bool hibernated)
+int ohci_resume(struct usb_hcd *hcd, bool hibernated)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int port;
return 0;
}
+EXPORT_SYMBOL_GPL(ohci_resume);
#endif
/*-------------------------------------------------------------------------*/
+/*
+ * Generic structure: This gets copied for platform drivers so that
+ * individual entries can be overridden as needed.
+ */
+
+static const struct hc_driver ohci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "OHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ohci_irq,
+ .flags = HCD_MEMORY | HCD_USB11,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ohci_setup,
+ .start = ohci_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ohci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
+};
+
+void ohci_init_driver(struct hc_driver *drv,
+ const struct ohci_driver_overrides *over)
+{
+ /* Copy the generic table to drv and then apply the overrides */
+ *drv = ohci_hc_driver;
+
+ drv->product_desc = over->product_desc;
+ drv->hcd_priv_size += over->extra_priv_size;
+ if (over->reset)
+ drv->reset = over->reset;
+}
+EXPORT_SYMBOL_GPL(ohci_init_driver);
+
+/*-------------------------------------------------------------------------*/
+
MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE ("GPL");
-#ifdef CONFIG_PCI
-#include "ohci-pci.c"
-#define PCI_DRIVER ohci_pci_driver
-#endif
-
#if defined(CONFIG_ARCH_SA1100) && defined(CONFIG_SA1111)
#include "ohci-sa1111.c"
#define SA1111_DRIVER ohci_hcd_sa1111_driver
#define PLATFORM_DRIVER ohci_hcd_tilegx_driver
#endif
-#ifdef CONFIG_USB_OHCI_HCD_PLATFORM
-#include "ohci-platform.c"
-#define PLATFORM_DRIVER ohci_platform_driver
-#endif
-
-#if !defined(PCI_DRIVER) && \
- !defined(PLATFORM_DRIVER) && \
- !defined(OMAP1_PLATFORM_DRIVER) && \
- !defined(OMAP3_PLATFORM_DRIVER) && \
- !defined(OF_PLATFORM_DRIVER) && \
- !defined(SA1111_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && \
- !defined(SM501_OHCI_DRIVER) && \
- !defined(TMIO_OHCI_DRIVER) && \
- !defined(S3C2410_PLATFORM_DRIVER) && \
- !defined(EXYNOS_PLATFORM_DRIVER) && \
- !defined(EP93XX_PLATFORM_DRIVER) && \
- !defined(AT91_PLATFORM_DRIVER) && \
- !defined(NXP_PLATFORM_DRIVER) && \
- !defined(DAVINCI_PLATFORM_DRIVER) && \
- !defined(SPEAR_PLATFORM_DRIVER)
-#error "missing bus glue for ohci-hcd"
-#endif
-
static int __init ohci_hcd_mod_init(void)
{
int retval = 0;
goto error_sa1111;
#endif
-#ifdef PCI_DRIVER
- retval = pci_register_driver(&PCI_DRIVER);
- if (retval < 0)
- goto error_pci;
-#endif
-
#ifdef SM501_OHCI_DRIVER
retval = platform_driver_register(&SM501_OHCI_DRIVER);
if (retval < 0)
platform_driver_unregister(&SM501_OHCI_DRIVER);
error_sm501:
#endif
-#ifdef PCI_DRIVER
- pci_unregister_driver(&PCI_DRIVER);
- error_pci:
-#endif
#ifdef SA1111_DRIVER
sa1111_driver_unregister(&SA1111_DRIVER);
error_sa1111:
#ifdef SM501_OHCI_DRIVER
platform_driver_unregister(&SM501_OHCI_DRIVER);
#endif
-#ifdef PCI_DRIVER
- pci_unregister_driver(&PCI_DRIVER);
-#endif
#ifdef SA1111_DRIVER
sa1111_driver_unregister(&SA1111_DRIVER);
#endif
projects / karo-tx-linux.git / blobdiff