]> git.karo-electronics.de Git - karo-tx-linux.git/blobdiff - drivers/usb/musb/musb_dsps.c
usb: musb: dsps: remove the hardcoded phy pieces
[karo-tx-linux.git] / drivers / usb / musb / musb_dsps.c
index e7a2cd1c6630a5aed3aee481a06ecd36cd390444..74333321cb628c15f89b684b72cfc84c60bb46de 100644 (file)
@@ -120,49 +120,8 @@ struct dsps_glue {
        const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
        struct timer_list timer[2];     /* otg_workaround timer */
        unsigned long last_timer[2];    /* last timer data for each instance */
-       u32 __iomem *usb_ctrl[2];
 };
 
-#define        DSPS_AM33XX_CONTROL_MODULE_PHYS_0       0x44e10620
-#define        DSPS_AM33XX_CONTROL_MODULE_PHYS_1       0x44e10628
-
-static const resource_size_t dsps_control_module_phys[] = {
-       DSPS_AM33XX_CONTROL_MODULE_PHYS_0,
-       DSPS_AM33XX_CONTROL_MODULE_PHYS_1,
-};
-
-#define USBPHY_CM_PWRDN                (1 << 0)
-#define USBPHY_OTG_PWRDN       (1 << 1)
-#define USBPHY_OTGVDET_EN      (1 << 19)
-#define USBPHY_OTGSESSEND_EN   (1 << 20)
-
-/**
- * musb_dsps_phy_control - phy on/off
- * @glue: struct dsps_glue *
- * @id: musb instance
- * @on: flag for phy to be switched on or off
- *
- * This is to enable the PHY using usb_ctrl register in system control
- * module space.
- *
- * XXX: This function will be removed once we have a seperate driver for
- * control module
- */
-static void musb_dsps_phy_control(struct dsps_glue *glue, u8 id, u8 on)
-{
-       u32 usbphycfg;
-
-       usbphycfg = readl(glue->usb_ctrl[id]);
-
-       if (on) {
-               usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN);
-               usbphycfg |= USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN;
-       } else {
-               usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
-       }
-
-       writel(usbphycfg, glue->usb_ctrl[id]);
-}
 /**
  * dsps_musb_enable - enable interrupts
  */
@@ -407,8 +366,7 @@ static int dsps_musb_init(struct musb *musb)
        musb->mregs += wrp->musb_core_offset;
 
        /* NOP driver needs change if supporting dual instance */
-       usb_nop_xceiv_register();
-       musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+       musb->xceiv = devm_usb_get_phy_by_phandle(glue->dev, "phys", 0);
        if (IS_ERR_OR_NULL(musb->xceiv))
                return -EPROBE_DEFER;
 
@@ -426,9 +384,6 @@ static int dsps_musb_init(struct musb *musb)
        /* Reset the musb */
        dsps_writel(reg_base, wrp->control, (1 << wrp->reset));
 
-       /* Start the on-chip PHY and its PLL. */
-       musb_dsps_phy_control(glue, pdev->id, 1);
-
        musb->isr = dsps_interrupt;
 
        /* reset the otgdisable bit, needed for host mode to work */
@@ -438,8 +393,6 @@ static int dsps_musb_init(struct musb *musb)
 
        return 0;
 err0:
-       usb_put_phy(musb->xceiv);
-       usb_nop_xceiv_unregister();
        return status;
 }
 
@@ -451,14 +404,7 @@ static int dsps_musb_exit(struct musb *musb)
 
        del_timer_sync(&glue->timer[pdev->id]);
 
-       /* Shutdown the on-chip PHY and its PLL. */
-       musb_dsps_phy_control(glue, pdev->id, 0);
        usb_phy_shutdown(musb->xceiv);
-
-       /* NOP driver needs change if supporting dual instance */
-       usb_put_phy(musb->xceiv);
-       usb_nop_xceiv_unregister();
-
        return 0;
 }
 
@@ -487,16 +433,6 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
        char res_name[11];
        int ret;
 
-       resources[0].start = dsps_control_module_phys[id];
-       resources[0].end = resources[0].start + SZ_4 - 1;
-       resources[0].flags = IORESOURCE_MEM;
-
-       glue->usb_ctrl[id] = devm_ioremap_resource(&pdev->dev, resources);
-       if (IS_ERR(glue->usb_ctrl[id])) {
-               ret = PTR_ERR(glue->usb_ctrl[id]);
-               goto err0;
-       }
-
        /* first resource is for usbss, so start index from 1 */
        res = platform_get_resource(pdev, IORESOURCE_MEM, id + 1);
        if (!res) {
@@ -680,36 +616,6 @@ static int dsps_remove(struct platform_device *pdev)
        return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int dsps_suspend(struct device *dev)
-{
-       struct platform_device *pdev = to_platform_device(dev->parent);
-       struct dsps_glue *glue = platform_get_drvdata(pdev);
-       const struct dsps_musb_wrapper *wrp = glue->wrp;
-       int i;
-
-       for (i = 0; i < wrp->instances; i++)
-               musb_dsps_phy_control(glue, i, 0);
-
-       return 0;
-}
-
-static int dsps_resume(struct device *dev)
-{
-       struct platform_device *pdev = to_platform_device(dev->parent);
-       struct dsps_glue *glue = platform_get_drvdata(pdev);
-       const struct dsps_musb_wrapper *wrp = glue->wrp;
-       int i;
-
-       for (i = 0; i < wrp->instances; i++)
-               musb_dsps_phy_control(glue, i, 1);
-
-       return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume);
-
 static const struct dsps_musb_wrapper am33xx_driver_data = {
        .revision               = 0x00,
        .control                = 0x14,
@@ -752,7 +658,6 @@ static struct platform_driver dsps_usbss_driver = {
        .remove         = dsps_remove,
        .driver         = {
                .name   = "musb-dsps",
-               .pm     = &dsps_pm_ops,
                .of_match_table = of_match_ptr(musb_dsps_of_match),
        },
 };