csr |= (MUSB_TXCSR_DMAENAB |
MUSB_TXCSR_MODE);
/* against programming guide */
- } else
- csr |= (MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAENAB
+ } else {
+ csr |= (MUSB_TXCSR_DMAENAB
| MUSB_TXCSR_DMAMODE
| MUSB_TXCSR_MODE);
-
+ if (!musb_ep->hb_mult)
+ csr |= MUSB_TXCSR_AUTOSET;
+ }
csr &= ~MUSB_TXCSR_P_UNDERRUN;
+
musb_writew(epio, MUSB_TXCSR, csr);
}
}
epnum, csr, musb_ep->dma->actual_len, request);
}
- if (is_dma || request->actual == request->length) {
- /*
- * First, maybe a terminating short packet. Some DMA
- * engines might handle this by themselves.
- */
- if ((request->zero && request->length
- && request->length % musb_ep->packet_sz == 0)
+ /*
+ * First, maybe a terminating short packet. Some DMA
+ * engines might handle this by themselves.
+ */
+ if ((request->zero && request->length
+ && (request->length % musb_ep->packet_sz == 0)
+ && (request->actual == request->length))
#ifdef CONFIG_USB_INVENTRA_DMA
- || (is_dma && (!dma->desired_mode ||
- (request->actual &
- (musb_ep->packet_sz - 1))))
+ || (is_dma && (!dma->desired_mode ||
+ (request->actual &
+ (musb_ep->packet_sz - 1))))
#endif
- ) {
- /*
- * On DMA completion, FIFO may not be
- * available yet...
- */
- if (csr & MUSB_TXCSR_TXPKTRDY)
- return;
+ ) {
+ /*
+ * On DMA completion, FIFO may not be
+ * available yet...
+ */
+ if (csr & MUSB_TXCSR_TXPKTRDY)
+ return;
- DBG(4, "sending zero pkt\n");
- musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_MODE
- | MUSB_TXCSR_TXPKTRDY);
- request->zero = 0;
- }
+ DBG(4, "sending zero pkt\n");
+ musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_MODE
+ | MUSB_TXCSR_TXPKTRDY);
+ request->zero = 0;
+ }
- if (request->actual == request->length) {
- musb_g_giveback(musb_ep, request, 0);
- request = musb_ep->desc ? next_request(musb_ep) : NULL;
- if (!request) {
- DBG(4, "%s idle now\n",
- musb_ep->end_point.name);
- return;
- }
+ if (request->actual == request->length) {
+ musb_g_giveback(musb_ep, request, 0);
+ request = musb_ep->desc ? next_request(musb_ep) : NULL;
+ if (!request) {
+ DBG(4, "%s idle now\n",
+ musb_ep->end_point.name);
+ return;
}
}
*/
csr |= MUSB_RXCSR_DMAENAB;
- csr |= MUSB_RXCSR_AUTOCLEAR;
+ if (!musb_ep->hb_mult &&
+ musb_ep->hw_ep->rx_double_buffered)
+ csr |= MUSB_RXCSR_AUTOCLEAR;
#ifdef USE_MODE1
/* csr |= MUSB_RXCSR_DMAMODE; */
musb_writew(epio, MUSB_RXCSR, csr);
DBG(3, "%s iso overrun on %p\n", musb_ep->name, request);
- if (request && request->status == -EINPROGRESS)
+ if (request->status == -EINPROGRESS)
request->status = -EOVERFLOW;
}
if (csr & MUSB_RXCSR_INCOMPRX) {
return;
}
- /* analyze request if the ep is hot */
- if (request)
- rxstate(musb, to_musb_request(request));
- else
- DBG(3, "packet waiting for %s%s request\n",
- musb_ep->desc ? "" : "inactive ",
- musb_ep->end_point.name);
- return;
+ /* Analyze request */
+ rxstate(musb, to_musb_request(request));
}
/* ------------------------------------------------------------ */
/* REVISIT this rules out high bandwidth periodic transfers */
tmp = le16_to_cpu(desc->wMaxPacketSize);
- if (tmp & ~0x07ff)
- goto fail;
- musb_ep->packet_sz = tmp;
+ if (tmp & ~0x07ff) {
+ int ok;
+
+ if (usb_endpoint_dir_in(desc))
+ ok = musb->hb_iso_tx;
+ else
+ ok = musb->hb_iso_rx;
+
+ if (!ok) {
+ DBG(4, "%s: not support ISO high bandwidth\n", __func__);
+ goto fail;
+ }
+ musb_ep->hb_mult = (tmp >> 11) & 3;
+ } else {
+ musb_ep->hb_mult = 0;
+ }
+
+ musb_ep->packet_sz = tmp & 0x7ff;
+ tmp = musb_ep->packet_sz * (musb_ep->hb_mult + 1);
/* enable the interrupts for the endpoint, set the endpoint
* packet size (or fail), set the mode, clear the fifo
musb_ep->is_in = 1;
if (!musb_ep->is_in)
goto fail;
- if (tmp > hw_ep->max_packet_sz_tx)
+
+ if (tmp > hw_ep->max_packet_sz_tx) {
+ DBG(4, "%s: packet size beyond hw fifo size\n", __func__);
goto fail;
+ }
int_txe |= (1 << epnum);
musb_writew(mbase, MUSB_INTRTXE, int_txe);
if (musb->hwvers < MUSB_HWVERS_2000)
musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
else
- musb_writew(regs, MUSB_TXMAXP, tmp);
+ musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
if (musb_readw(regs, MUSB_TXCSR)
musb_ep->is_in = 0;
if (musb_ep->is_in)
goto fail;
- if (tmp > hw_ep->max_packet_sz_rx)
+
+ if (tmp > hw_ep->max_packet_sz_rx) {
+ DBG(4, "%s: packet size beyond hw fifo size\n", __func__);
goto fail;
+ }
int_rxe |= (1 << epnum);
musb_writew(mbase, MUSB_INTRRXE, int_rxe);
if (musb->hwvers < MUSB_HWVERS_2000)
musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_rx);
else
- musb_writew(regs, MUSB_RXMAXP, tmp);
+ musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
/* force shared fifo to OUT-only mode */
if (hw_ep->is_shared_fifo) {
* -ENOMEM no memeory to perform the operation
*
* @param driver the gadget driver
+ * @param bind the driver's bind function
* @return <0 if error, 0 if everything is fine
*/
-int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+ int (*bind)(struct usb_gadget *))
{
int retval;
unsigned long flags;
if (!driver
|| driver->speed != USB_SPEED_HIGH
- || !driver->bind
- || !driver->setup)
+ || !bind || !driver->setup)
return -EINVAL;
/* driver must be initialized to support peripheral mode */
spin_unlock_irqrestore(&musb->lock, flags);
if (retval == 0) {
- retval = driver->bind(&musb->g);
+ retval = bind(&musb->g);
if (retval != 0) {
DBG(3, "bind to driver %s failed --> %d\n",
driver->driver.name, retval);
return retval;
}
-EXPORT_SYMBOL(usb_gadget_register_driver);
+EXPORT_SYMBOL(usb_gadget_probe_driver);
static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
{