Merge branch 'master' of git://git.denx.de/u-boot-nand-flash

[karo-tx-uboot.git] / drivers / usb / musb / musb_hcd.c

diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index 06be38d1cf96928b043f0b92fedbc8ec4d91bb9c..708fa124a21489f4b9ed46a24fc2dce0ffc4970e 100644 (file)
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -3,25 +3,13 @@
  *
  * Copyright (c) 2008 Texas Instruments
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  *
  * Author: Thomas Abraham t-abraham@ti.com, Texas Instruments
  */
 
 #include <common.h>
+#include <usb.h>
 #include "musb_hcd.h"
 
 /* MSC control transfers */
@@ -279,7 +267,7 @@ static int wait_until_ep0_ready(struct usb_device *dev, u32 bit_mask)
 /*
  * waits until tx ep is ready. Returns 1 when ep is ready and 0 on error.
  */
-static u8 wait_until_txep_ready(struct usb_device *dev, u8 ep)
+static int wait_until_txep_ready(struct usb_device *dev, u8 ep)
 {
        u16 csr;
        int timeout = CONFIG_MUSB_TIMEOUT;
@@ -311,7 +299,7 @@ static u8 wait_until_txep_ready(struct usb_device *dev, u8 ep)
 /*
  * waits until rx ep is ready. Returns 1 when ep is ready and 0 on error.
  */
-static u8 wait_until_rxep_ready(struct usb_device *dev, u8 ep)
+static int wait_until_rxep_ready(struct usb_device *dev, u8 ep)
 {
        u16 csr;
        int timeout = CONFIG_MUSB_TIMEOUT;
@@ -429,8 +417,12 @@ static int ctrlreq_out_data_phase(struct usb_device *dev, u32 len, void *buffer)
 
                /* Set TXPKTRDY bit */
                csr = readw(&musbr->txcsr);
-               writew(csr | MUSB_CSR0_H_DIS_PING | MUSB_CSR0_TXPKTRDY,
-                                       &musbr->txcsr);
+                       
+               csr |= MUSB_CSR0_TXPKTRDY;
+#if !defined(CONFIG_SOC_DM365)
+               csr |= MUSB_CSR0_H_DIS_PING;
+#endif
+               writew(csr, &musbr->txcsr);
                result = wait_until_ep0_ready(dev, MUSB_CSR0_TXPKTRDY);
                if (result < 0)
                        break;
@@ -451,8 +443,10 @@ static int ctrlreq_out_status_phase(struct usb_device *dev)
 
        /* Set the StatusPkt bit */
        csr = readw(&musbr->txcsr);
-       csr |= (MUSB_CSR0_H_DIS_PING | MUSB_CSR0_TXPKTRDY |
-                       MUSB_CSR0_H_STATUSPKT);
+       csr |= (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_H_STATUSPKT);
+#if !defined(CONFIG_SOC_DM365)
+       csr |= MUSB_CSR0_H_DIS_PING;
+#endif
        writew(csr, &musbr->txcsr);
 
        /* Wait until TXPKTRDY bit is cleared */
@@ -469,7 +463,10 @@ static int ctrlreq_in_status_phase(struct usb_device *dev)
        int result;
 
        /* Set the StatusPkt bit and ReqPkt bit */
-       csr = MUSB_CSR0_H_DIS_PING | MUSB_CSR0_H_REQPKT | MUSB_CSR0_H_STATUSPKT;
+       csr = MUSB_CSR0_H_REQPKT | MUSB_CSR0_H_STATUSPKT;
+#if !defined(CONFIG_SOC_DM365)
+       csr |= MUSB_CSR0_H_DIS_PING;
+#endif
        writew(csr, &musbr->txcsr);
        result = wait_until_ep0_ready(dev, MUSB_CSR0_H_REQPKT);
 
@@ -485,8 +482,8 @@ static int ctrlreq_in_status_phase(struct usb_device *dev)
  */
 static u8 get_dev_speed(struct usb_device *dev)
 {
-       return (dev->speed & USB_SPEED_HIGH) ? MUSB_TYPE_SPEED_HIGH :
-               ((dev->speed & USB_SPEED_LOW) ? MUSB_TYPE_SPEED_LOW :
+       return (dev->speed == USB_SPEED_HIGH) ? MUSB_TYPE_SPEED_HIGH :
+               ((dev->speed == USB_SPEED_LOW) ? MUSB_TYPE_SPEED_LOW :
                                                MUSB_TYPE_SPEED_FULL);
 }
 
@@ -1021,7 +1018,7 @@ int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
                        writew(csr | MUSB_TXCSR_TXPKTRDY, &musbr->txcsr);
 
                        /* Wait until the TxPktRdy bit is cleared */
-                       if (!wait_until_txep_ready(dev, MUSB_BULK_EP)) {
+                       if (wait_until_txep_ready(dev, MUSB_BULK_EP) != 1) {
                                readw(&musbr->txcsr);
                                usb_settoggle(dev, ep, dir_out,
                                (csr >> MUSB_TXCSR_H_DATATOGGLE_SHIFT) & 1);
@@ -1056,7 +1053,7 @@ int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
                        writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
 
                        /* Wait until the RxPktRdy bit is set */
-                       if (!wait_until_rxep_ready(dev, MUSB_BULK_EP)) {
+                       if (wait_until_rxep_ready(dev, MUSB_BULK_EP) != 1) {
                                csr = readw(&musbr->rxcsr);
                                usb_settoggle(dev, ep, dir_out,
                                (csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);
@@ -1104,8 +1101,7 @@ int usb_lowlevel_init(int index, void **controller)
 
        /* Configure all the endpoint FIFO's and start usb controller */
        musbr = musb_cfg.regs;
-       musb_configure_ep(&epinfo[0],
-                       sizeof(epinfo) / sizeof(struct musb_epinfo));
+       musb_configure_ep(&epinfo[0], ARRAY_SIZE(epinfo));
        musb_start();
 
        /*
@@ -1230,7 +1226,7 @@ int submit_int_msg(struct usb_device *dev, unsigned long pipe,
                        writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
 
                        /* Wait until the RxPktRdy bit is set */
-                       if (!wait_until_rxep_ready(dev, MUSB_INTR_EP)) {
+                       if (wait_until_rxep_ready(dev, MUSB_INTR_EP) != 1) {
                                csr = readw(&musbr->rxcsr);
                                usb_settoggle(dev, ep, dir_out,
                                (csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);