USB: more serial drivers writing after disconnect

[karo-tx-linux.git] / drivers / usb / serial / cp2101.c

diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index da16b5157816b691df56ab8a692c3b812cc86bde..f3ca66017a031ba81db256216b905b4cf3989efa 100644 (file)
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -55,9 +55,11 @@ static int debug;
 static struct usb_device_id id_table [] = {
        { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
        { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
+       { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
        { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
        { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
        { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
+       { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
        { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
        { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
        { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
@@ -75,8 +77,13 @@ static struct usb_device_id id_table [] = {
        { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
        { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
        { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+       { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
+       { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
+       { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
+       { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
        { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
        { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
+       { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
        { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
        { } /* Terminating Entry */
 };
@@ -341,7 +348,10 @@ static void cp2101_close (struct usb_serial_port *port, struct file * filp)
        usb_kill_urb(port->write_urb);
        usb_kill_urb(port->read_urb);
 
-       cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
+       mutex_lock(&port->serial->disc_mutex);
+       if (!port->serial->disconnected)
+               cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
+       mutex_unlock(&port->serial->disc_mutex);
 }
 
 /*