static __u16 product;
struct ftdi_private {
+ struct kref kref;
ftdi_chip_type_t chip_type;
/* type of device, either SIO or FT8U232AM */
int baud_base; /* baud base clock for divisor setting */
int force_rtscts; /* if non-zero, force RTS-CTS to always
be enabled */
+ unsigned int latency; /* latency setting in use */
spinlock_t tx_lock; /* spinlock for transmit state */
unsigned long tx_bytes;
unsigned long tx_outstanding_bytes;
{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
+ { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
static int ftdi_sio_port_remove(struct usb_serial_port *port);
static int ftdi_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void ftdi_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void ftdi_close(struct usb_serial_port *port);
+static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int ftdi_write_room(struct tty_struct *tty);
.port_remove = ftdi_sio_port_remove,
.open = ftdi_open,
.close = ftdi_close,
+ .dtr_rts = ftdi_dtr_rts,
.throttle = ftdi_throttle,
.unthrottle = ftdi_unthrottle,
.write = ftdi_write,
return rv;
}
+static int write_latency_timer(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_device *udev = port->serial->dev;
+ char buf[1];
+ int rv = 0;
+ int l = priv->latency;
+
+ if (priv->flags & ASYNC_LOW_LATENCY)
+ l = 1;
+
+ dbg("%s: setting latency timer = %i", __func__, l);
+ rv = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+ l, priv->interface,
+ buf, 0, WDR_TIMEOUT);
+
+ if (rv < 0)
+ dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
+ return rv;
+}
+
+static int read_latency_timer(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_device *udev = port->serial->dev;
+ unsigned short latency = 0;
+ int rv = 0;
+
+
+ dbg("%s", __func__);
+
+ rv = usb_control_msg(udev,
+ usb_rcvctrlpipe(udev, 0),
+ FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
+ FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
+ 0, priv->interface,
+ (char *) &latency, 1, WDR_TIMEOUT);
+
+ if (rv < 0) {
+ dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
+ return -EIO;
+ }
+ return latency;
+}
static int get_serial_info(struct usb_serial_port *port,
struct serial_struct __user *retinfo)
priv->custom_divisor = new_serial.custom_divisor;
tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ write_latency_timer(port);
check_and_exit:
if ((old_priv.flags & ASYNC_SPD_MASK) !=
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct usb_device *udev = port->serial->dev;
- unsigned short latency = 0;
- int rv = 0;
-
-
- dbg("%s", __func__);
-
- rv = usb_control_msg(udev,
- usb_rcvctrlpipe(udev, 0),
- FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
- FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
- 0, priv->interface,
- (char *) &latency, 1, WDR_TIMEOUT);
-
- if (rv < 0) {
- dev_err(dev, "Unable to read latency timer: %i\n", rv);
- return -EIO;
- }
- return sprintf(buf, "%i\n", latency);
+ if (priv->flags & ASYNC_LOW_LATENCY)
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "%i\n", priv->latency);
}
+
/* Write a new value of the latency timer, in units of milliseconds. */
static ssize_t store_latency_timer(struct device *dev,
struct device_attribute *attr, const char *valbuf,
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct usb_device *udev = port->serial->dev;
- char buf[1];
int v = simple_strtoul(valbuf, NULL, 10);
int rv = 0;
- dbg("%s: setting latency timer = %i", __func__, v);
-
- rv = usb_control_msg(udev,
- usb_sndctrlpipe(udev, 0),
- FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
- FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
- v, priv->interface,
- buf, 0, WDR_TIMEOUT);
-
- if (rv < 0) {
- dev_err(dev, "Unable to write latency timer: %i\n", rv);
+ priv->latency = v;
+ rv = write_latency_timer(port);
+ if (rv < 0)
return -EIO;
- }
-
return count;
}
return -ENOMEM;
}
+ kref_init(&priv->kref);
spin_lock_init(&priv->rx_lock);
spin_lock_init(&priv->tx_lock);
init_waitqueue_head(&priv->delta_msr_wait);
usb_set_serial_port_data(port, priv);
ftdi_determine_type(port);
+ read_latency_timer(port);
create_sysfs_attrs(port);
return 0;
}
dbg("%s", __func__);
}
+static void ftdi_sio_priv_release(struct kref *k)
+{
+ struct ftdi_private *priv = container_of(k, struct ftdi_private, kref);
+
+ kfree(priv);
+}
+
static int ftdi_sio_port_remove(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
remove_sysfs_attrs(port);
- /* all open ports are closed at this point
- * (by usbserial.c:__serial_close, which calls ftdi_close)
- */
-
- if (priv) {
- usb_set_serial_port_data(port, NULL);
- kfree(priv);
- }
+ kref_put(&priv->kref, ftdi_sio_priv_release);
return 0;
}
if (tty)
tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ write_latency_timer(port);
+
/* No error checking for this (will get errors later anyway) */
/* See ftdi_sio.h for description of what is reset */
usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
dev_err(&port->dev,
"%s - failed submitting read urb, error %d\n",
__func__, result);
-
+ else
+ kref_get(&priv->kref);
return result;
} /* ftdi_open */
+static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ char buf[1];
+
+ mutex_lock(&port->serial->disc_mutex);
+ if (!port->serial->disconnected) {
+ /* Disable flow control */
+ if (!on && usb_control_msg(port->serial->dev,
+ usb_sndctrlpipe(port->serial->dev, 0),
+ FTDI_SIO_SET_FLOW_CTRL_REQUEST,
+ FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
+ 0, priv->interface, buf, 0,
+ WDR_TIMEOUT) < 0) {
+ dev_err(&port->dev, "error from flowcontrol urb\n");
+ }
+ /* drop RTS and DTR */
+ if (on)
+ set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+ else
+ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+ }
+ mutex_unlock(&port->serial->disc_mutex);
+}
/*
* usbserial:__serial_close only calls ftdi_close if the point is open
*
*/
-static void ftdi_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void ftdi_close(struct usb_serial_port *port)
{ /* ftdi_close */
- unsigned int c_cflag = tty->termios->c_cflag;
struct ftdi_private *priv = usb_get_serial_port_data(port);
- char buf[1];
dbg("%s", __func__);
- mutex_lock(&port->serial->disc_mutex);
- if (c_cflag & HUPCL && !port->serial->disconnected) {
- /* Disable flow control */
- if (usb_control_msg(port->serial->dev,
- usb_sndctrlpipe(port->serial->dev, 0),
- FTDI_SIO_SET_FLOW_CTRL_REQUEST,
- FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
- 0, priv->interface, buf, 0,
- WDR_TIMEOUT) < 0) {
- dev_err(&port->dev, "error from flowcontrol urb\n");
- }
-
- /* drop RTS and DTR */
- clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
- } /* Note change no line if hupcl is off */
- mutex_unlock(&port->serial->disc_mutex);
/* cancel any scheduled reading */
- cancel_delayed_work(&priv->rx_work);
- flush_scheduled_work();
+ cancel_delayed_work_sync(&priv->rx_work);
/* shutdown our bulk read */
usb_kill_urb(port->read_urb);
+ kref_put(&priv->kref, ftdi_sio_priv_release);
} /* ftdi_close */
projects / linux-beck.git / blobdiff