#include <linux/circ_buf.h>
#include <linux/mutex.h>
#include <asm/uaccess.h>
-#include <asm/semaphore.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
.description = "TI USB 3410 1 port adapter",
.usb_driver = &ti_usb_driver,
.id_table = ti_id_table_3410,
- .num_interrupt_in = 1,
- .num_bulk_in = 1,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = 1,
.num_ports = 1,
.attach = ti_startup,
}
}
- ti_set_termios(port, NULL);
+ ti_set_termios(port, port->tty->termios);
dbg("%s - sending TI_OPEN_PORT", __FUNCTION__);
status = ti_command_out_sync(tdev, TI_OPEN_PORT,
usb_clear_halt(dev, port->write_urb->pipe);
usb_clear_halt(dev, port->read_urb->pipe);
- ti_set_termios(port, NULL);
+ ti_set_termios(port, port->tty->termios);
dbg("%s - sending TI_OPEN_PORT (2)", __FUNCTION__);
status = ti_command_out_sync(tdev, TI_OPEN_PORT,
dbg("%s - port %d", __FUNCTION__, port->number);
- if (!tty || !tty->termios) {
- dbg("%s - no tty or termios", __FUNCTION__);
- return;
- }
-
cflag = tty->termios->c_cflag;
iflag = tty->termios->c_iflag;
- if (old_termios && cflag == old_termios->c_cflag
- && iflag == old_termios->c_iflag) {
- dbg("%s - nothing to change", __FUNCTION__);
- return;
- }
-
- dbg("%s - clfag %08x, iflag %08x", __FUNCTION__, cflag, iflag);
-
- if (old_termios)
- dbg("%s - old clfag %08x, old iflag %08x", __FUNCTION__, old_termios->c_cflag, old_termios->c_iflag);
+ dbg("%s - cflag %08x, iflag %08x", __FUNCTION__, cflag, iflag);
+ dbg("%s - old clfag %08x, old iflag %08x", __FUNCTION__, old_termios->c_cflag, old_termios->c_iflag);
if (tport == NULL)
return;
break;
}
+ /* CMSPAR isn't supported by this driver */
+ tty->termios->c_cflag &= ~CMSPAR;
+
if (cflag & PARENB) {
if (cflag & PARODD) {
config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING;
}
baud = tty_get_baud_rate(tty);
- if (!baud) baud = 9600;
+ if (!baud)
+ baud = 9600;
if (tport->tp_tdev->td_is_3410)
config->wBaudRate = (__u16)((923077 + baud/2) / baud);
else
config->wBaudRate = (__u16)((461538 + baud/2) / baud);
+ /* FIXME: Should calculate resulting baud here and report it back */
+ if ((cflag & CBAUD) != B0)
+ tty_encode_baud_rate(tty, baud, baud);
+
dbg("%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d",
__FUNCTION__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode);
struct ti_device *tdev = tport->tp_tdev;
struct usb_serial_port *port = tport->tp_port;
wait_queue_t wait;
- unsigned long flags;
dbg("%s - port %d", __FUNCTION__, port->number);
- spin_lock_irqsave(&tport->tp_lock, flags);
+ spin_lock_irq(&tport->tp_lock);
/* wait for data to drain from the buffer */
tdev->td_urb_error = 0;
if (ti_buf_data_avail(tport->tp_write_buf) == 0
|| timeout == 0 || signal_pending(current)
|| tdev->td_urb_error
- || !usb_get_intfdata(port->serial->interface)) /* disconnect */
+ || port->serial->disconnected) /* disconnect */
break;
- spin_unlock_irqrestore(&tport->tp_lock, flags);
+ spin_unlock_irq(&tport->tp_lock);
timeout = schedule_timeout(timeout);
- spin_lock_irqsave(&tport->tp_lock, flags);
+ spin_lock_irq(&tport->tp_lock);
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&tport->tp_write_wait, &wait);
if (flush)
ti_buf_clear(tport->tp_write_buf);
- spin_unlock_irqrestore(&tport->tp_lock, flags);
+ spin_unlock_irq(&tport->tp_lock);
+ mutex_lock(&port->serial->disc_mutex);
/* wait for data to drain from the device */
/* wait for empty tx register, plus 20 ms */
timeout += jiffies;
tport->tp_lsr &= ~TI_LSR_TX_EMPTY;
while ((long)(jiffies - timeout) < 0 && !signal_pending(current)
&& !(tport->tp_lsr&TI_LSR_TX_EMPTY) && !tdev->td_urb_error
- && usb_get_intfdata(port->serial->interface)) { /* not disconnected */
+ && !port->serial->disconnected) {
if (ti_get_lsr(tport))
break;
+ mutex_unlock(&port->serial->disc_mutex);
msleep_interruptible(20);
+ mutex_lock(&port->serial->disc_mutex);
}
+ mutex_unlock(&port->serial->disc_mutex);
}