#ifdef CONFIG_FB_S3C_DEBUG_REGWRITE
#undef writel
#define writel(v, r) do { \
- printk(KERN_DEBUG "%s: %08x => %p\n", __func__, (unsigned int)v, r); \
+ pr_debug("%s: %08x => %p\n", __func__, (unsigned int)v, r); \
__raw_writel(v, r); \
} while (0)
#endif /* FB_S3C_DEBUG_REGWRITE */
result = (unsigned int)tmp / 1000;
dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
- pixclk, clk, result, clk / result);
+ pixclk, clk, result, result ? clk / result : clk);
return result;
}
u32 alpha = 0;
u32 data;
u32 pagewidth;
- int clkdiv;
dev_dbg(sfb->dev, "setting framebuffer parameters\n");
/* disable the window whilst we update it */
writel(0, regs + WINCON(win_no));
- /* use platform specified window as the basis for the lcd timings */
-
- if (win_no == sfb->pdata->default_win) {
- clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock);
-
- data = sfb->pdata->vidcon0;
- data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR);
-
- if (clkdiv > 1)
- data |= VIDCON0_CLKVAL_F(clkdiv-1) | VIDCON0_CLKDIR;
- else
- data &= ~VIDCON0_CLKDIR; /* 1:1 clock */
-
- /* write the timing data to the panel */
-
- if (sfb->variant.is_2443)
- data |= (1 << 5);
-
- writel(data, regs + VIDCON0);
-
+ if (!sfb->output_on)
s3c_fb_enable(sfb, 1);
- data = VIDTCON0_VBPD(var->upper_margin - 1) |
- VIDTCON0_VFPD(var->lower_margin - 1) |
- VIDTCON0_VSPW(var->vsync_len - 1);
-
- writel(data, regs + sfb->variant.vidtcon);
-
- data = VIDTCON1_HBPD(var->left_margin - 1) |
- VIDTCON1_HFPD(var->right_margin - 1) |
- VIDTCON1_HSPW(var->hsync_len - 1);
-
- /* VIDTCON1 */
- writel(data, regs + sfb->variant.vidtcon + 4);
-
- data = VIDTCON2_LINEVAL(var->yres - 1) |
- VIDTCON2_HOZVAL(var->xres - 1) |
- VIDTCON2_LINEVAL_E(var->yres - 1) |
- VIDTCON2_HOZVAL_E(var->xres - 1);
- writel(data, regs + sfb->variant.vidtcon + 8);
- }
-
/* write the buffer address */
/* start and end registers stride is 8 */
struct s3c_fb *sfb = win->parent;
unsigned int index = win->index;
u32 wincon;
+ u32 output_on = sfb->output_on;
dev_dbg(sfb->dev, "blank mode %d\n", blank_mode);
shadow_protect_win(win, 1);
writel(wincon, sfb->regs + sfb->variant.wincon + (index * 4));
- shadow_protect_win(win, 0);
/* Check the enabled state to see if we need to be running the
* main LCD interface, as if there are no active windows then
* it is highly likely that we also do not need to output
* anything.
*/
-
- /* We could do something like the following code, but the current
- * system of using framebuffer events means that we cannot make
- * the distinction between just window 0 being inactive and all
- * the windows being down.
- *
- * s3c_fb_enable(sfb, sfb->enabled ? 1 : 0);
- */
-
- /* we're stuck with this until we can do something about overriding
- * the power control using the blanking event for a single fb.
- */
- if (index == sfb->pdata->default_win) {
- shadow_protect_win(win, 1);
- s3c_fb_enable(sfb, blank_mode != FB_BLANK_POWERDOWN ? 1 : 0);
- shadow_protect_win(win, 0);
- }
+ s3c_fb_enable(sfb, sfb->enabled ? 1 : 0);
+ shadow_protect_win(win, 0);
pm_runtime_put_sync(sfb->dev);
- return 0;
+ return output_on == sfb->output_on;
}
/**
*
* Calculate the pixel clock when none has been given through platform data.
*/
-static void __devinit s3c_fb_missing_pixclock(struct fb_videomode *mode)
+static void s3c_fb_missing_pixclock(struct fb_videomode *mode)
{
u64 pixclk = 1000000000000ULL;
u32 div;
dev_dbg(sfb->dev, "allocating memory for display\n");
- real_size = windata->win_mode.xres * windata->win_mode.yres;
+ real_size = windata->xres * windata->yres;
virt_size = windata->virtual_x * windata->virtual_y;
dev_dbg(sfb->dev, "real_size=%u (%u.%u), virt_size=%u (%u.%u)\n",
- real_size, windata->win_mode.xres, windata->win_mode.yres,
+ real_size, windata->xres, windata->yres,
virt_size, windata->virtual_x, windata->virtual_y);
size = (real_size > virt_size) ? real_size : virt_size;
struct s3c_fb_win **res)
{
struct fb_var_screeninfo *var;
- struct fb_videomode *initmode;
+ struct fb_videomode initmode;
struct s3c_fb_pd_win *windata;
struct s3c_fb_win *win;
struct fb_info *fbinfo;
}
windata = sfb->pdata->win[win_no];
- initmode = &windata->win_mode;
+ initmode = *sfb->pdata->vtiming;
WARN_ON(windata->max_bpp == 0);
- WARN_ON(windata->win_mode.xres == 0);
- WARN_ON(windata->win_mode.yres == 0);
+ WARN_ON(windata->xres == 0);
+ WARN_ON(windata->yres == 0);
win = fbinfo->par;
*res = win;
}
/* setup the initial video mode from the window */
- fb_videomode_to_var(&fbinfo->var, initmode);
+ initmode.xres = windata->xres;
+ initmode.yres = windata->yres;
+ fb_videomode_to_var(&fbinfo->var, &initmode);
fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
fbinfo->fix.accel = FB_ACCEL_NONE;
return 0;
}
+/**
+ * s3c_fb_set_rgb_timing() - set video timing for rgb interface.
+ * @sfb: The base resources for the hardware.
+ *
+ * Set horizontal and vertical lcd rgb interface timing.
+ */
+static void s3c_fb_set_rgb_timing(struct s3c_fb *sfb)
+{
+ struct fb_videomode *vmode = sfb->pdata->vtiming;
+ void __iomem *regs = sfb->regs;
+ int clkdiv;
+ u32 data;
+
+ if (!vmode->pixclock)
+ s3c_fb_missing_pixclock(vmode);
+
+ clkdiv = s3c_fb_calc_pixclk(sfb, vmode->pixclock);
+
+ data = sfb->pdata->vidcon0;
+ data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR);
+
+ if (clkdiv > 1)
+ data |= VIDCON0_CLKVAL_F(clkdiv-1) | VIDCON0_CLKDIR;
+ else
+ data &= ~VIDCON0_CLKDIR; /* 1:1 clock */
+
+ if (sfb->variant.is_2443)
+ data |= (1 << 5);
+ writel(data, regs + VIDCON0);
+
+ data = VIDTCON0_VBPD(vmode->upper_margin - 1) |
+ VIDTCON0_VFPD(vmode->lower_margin - 1) |
+ VIDTCON0_VSPW(vmode->vsync_len - 1);
+ writel(data, regs + sfb->variant.vidtcon);
+
+ data = VIDTCON1_HBPD(vmode->left_margin - 1) |
+ VIDTCON1_HFPD(vmode->right_margin - 1) |
+ VIDTCON1_HSPW(vmode->hsync_len - 1);
+ writel(data, regs + sfb->variant.vidtcon + 4);
+
+ data = VIDTCON2_LINEVAL(vmode->yres - 1) |
+ VIDTCON2_HOZVAL(vmode->xres - 1) |
+ VIDTCON2_LINEVAL_E(vmode->yres - 1) |
+ VIDTCON2_HOZVAL_E(vmode->xres - 1);
+ writel(data, regs + sfb->variant.vidtcon + 8);
+}
+
/**
* s3c_fb_clear_win() - clear hardware window registers.
* @sfb: The base resources for the hardware.
writel(0, regs + VIDOSD_A(win, sfb->variant));
writel(0, regs + VIDOSD_B(win, sfb->variant));
writel(0, regs + VIDOSD_C(win, sfb->variant));
- reg = readl(regs + SHADOWCON);
- writel(reg & ~SHADOWCON_WINx_PROTECT(win), regs + SHADOWCON);
+
+ if (sfb->variant.has_shadowcon) {
+ reg = readl(sfb->regs + SHADOWCON);
+ reg &= ~(SHADOWCON_WINx_PROTECT(win) |
+ SHADOWCON_CHx_ENABLE(win) |
+ SHADOWCON_CHx_LOCAL_ENABLE(win));
+ writel(reg, sfb->regs + SHADOWCON);
+ }
}
static int __devinit s3c_fb_probe(struct platform_device *pdev)
writel(0xffffff, regs + WKEYCON1);
}
+ s3c_fb_set_rgb_timing(sfb);
+
/* we have the register setup, start allocating framebuffers */
for (win = 0; win < fbdrv->variant.nr_windows; win++) {
if (!pd->win[win])
continue;
- if (!pd->win[win]->win_mode.pixclock)
- s3c_fb_missing_pixclock(&pd->win[win]->win_mode);
-
ret = s3c_fb_probe_win(sfb, win, fbdrv->win[win],
&sfb->windows[win]);
if (ret < 0) {
struct s3c_fb_win *win;
int win_no;
+ pm_runtime_get_sync(sfb->dev);
+
for (win_no = S3C_FB_MAX_WIN - 1; win_no >= 0; win_no--) {
win = sfb->windows[win_no];
if (!win)
clk_disable(sfb->lcd_clk);
clk_disable(sfb->bus_clk);
+
+ pm_runtime_put_sync(sfb->dev);
+
return 0;
}
int win_no;
u32 reg;
+ pm_runtime_get_sync(sfb->dev);
+
clk_enable(sfb->bus_clk);
if (!sfb->variant.has_clksel)
shadow_protect_win(win, 0);
}
+ s3c_fb_set_rgb_timing(sfb);
+
/* restore framebuffers */
for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) {
win = sfb->windows[win_no];
s3c_fb_set_par(win->fbinfo);
}
+ pm_runtime_put_sync(sfb->dev);
+
return 0;
}
#endif
projects / karo-tx-linux.git / blobdiff