#include <errno.h>
#include <fdtdec.h>
#include <fdt_support.h>
+#include <i2c.h>
#include <video_fb.h>
#include "videomodes.h"
+#include "hitachi_tx18d42vm_lcd.h"
+#include "ssd2828.h"
+
+#ifdef CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW
+#define PWM_ON 0
+#define PWM_OFF 1
+#else
+#define PWM_ON 1
+#define PWM_OFF 0
+#endif
DECLARE_GLOBAL_DATA_PTR;
GraphicDevice graphic_device;
enum sunxi_monitor monitor;
unsigned int depth;
+ unsigned int fb_size;
} sunxi_display;
#ifdef CONFIG_VIDEO_HDMI
CCM_HDMI_CTRL_PLL3);
/* Set ahb gating to pass */
-#ifdef CONFIG_MACH_SUN6I
+#ifdef CONFIG_SUNXI_GEN_SUN6I
setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI);
#endif
setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI);
clrbits_le32(&hdmi->ctrl, SUNXI_HDMI_CTRL_ENABLE);
clrbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE);
clrbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI);
-#ifdef CONFIG_MACH_SUN6I
+#ifdef CONFIG_SUNXI_GEN_SUN6I
clrbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI);
#endif
clock_set_pll3(0);
#endif /* CONFIG_VIDEO_HDMI */
+#ifdef CONFIG_MACH_SUN4I
+/*
+ * Testing has shown that on sun4i the display backend engine does not have
+ * deep enough fifo-s causing flickering / tearing in full-hd mode due to
+ * fifo underruns. So on sun4i we use the display frontend engine to do the
+ * dma from memory, as the frontend does have deep enough fifo-s.
+ */
+
+static const u32 sun4i_vert_coef[32] = {
+ 0x00004000, 0x000140ff, 0x00033ffe, 0x00043ffd,
+ 0x00063efc, 0xff083dfc, 0x000a3bfb, 0xff0d39fb,
+ 0xff0f37fb, 0xff1136fa, 0xfe1433fb, 0xfe1631fb,
+ 0xfd192ffb, 0xfd1c2cfb, 0xfd1f29fb, 0xfc2127fc,
+ 0xfc2424fc, 0xfc2721fc, 0xfb291ffd, 0xfb2c1cfd,
+ 0xfb2f19fd, 0xfb3116fe, 0xfb3314fe, 0xfa3611ff,
+ 0xfb370fff, 0xfb390dff, 0xfb3b0a00, 0xfc3d08ff,
+ 0xfc3e0600, 0xfd3f0400, 0xfe3f0300, 0xff400100,
+};
+
+static const u32 sun4i_horz_coef[64] = {
+ 0x40000000, 0x00000000, 0x40fe0000, 0x0000ff03,
+ 0x3ffd0000, 0x0000ff05, 0x3ffc0000, 0x0000ff06,
+ 0x3efb0000, 0x0000ff08, 0x3dfb0000, 0x0000ff09,
+ 0x3bfa0000, 0x0000fe0d, 0x39fa0000, 0x0000fe0f,
+ 0x38fa0000, 0x0000fe10, 0x36fa0000, 0x0000fe12,
+ 0x33fa0000, 0x0000fd16, 0x31fa0000, 0x0000fd18,
+ 0x2ffa0000, 0x0000fd1a, 0x2cfa0000, 0x0000fc1e,
+ 0x29fa0000, 0x0000fc21, 0x27fb0000, 0x0000fb23,
+ 0x24fb0000, 0x0000fb26, 0x21fb0000, 0x0000fb29,
+ 0x1ffc0000, 0x0000fa2b, 0x1cfc0000, 0x0000fa2e,
+ 0x19fd0000, 0x0000fa30, 0x16fd0000, 0x0000fa33,
+ 0x14fd0000, 0x0000fa35, 0x11fe0000, 0x0000fa37,
+ 0x0ffe0000, 0x0000fa39, 0x0dfe0000, 0x0000fa3b,
+ 0x0afe0000, 0x0000fa3e, 0x08ff0000, 0x0000fb3e,
+ 0x06ff0000, 0x0000fb40, 0x05ff0000, 0x0000fc40,
+ 0x03ff0000, 0x0000fd41, 0x01ff0000, 0x0000fe42,
+};
+
+static void sunxi_frontend_init(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_de_fe_reg * const de_fe =
+ (struct sunxi_de_fe_reg *)SUNXI_DE_FE0_BASE;
+ int i;
+
+ /* Clocks on */
+ setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_DE_FE0);
+ setbits_le32(&ccm->dram_clk_gate, 1 << CCM_DRAM_GATE_OFFSET_DE_FE0);
+ clock_set_de_mod_clock(&ccm->fe0_clk_cfg, 300000000);
+
+ setbits_le32(&de_fe->enable, SUNXI_DE_FE_ENABLE_EN);
+
+ for (i = 0; i < 32; i++) {
+ writel(sun4i_horz_coef[2 * i], &de_fe->ch0_horzcoef0[i]);
+ writel(sun4i_horz_coef[2 * i + 1], &de_fe->ch0_horzcoef1[i]);
+ writel(sun4i_vert_coef[i], &de_fe->ch0_vertcoef[i]);
+ writel(sun4i_horz_coef[2 * i], &de_fe->ch1_horzcoef0[i]);
+ writel(sun4i_horz_coef[2 * i + 1], &de_fe->ch1_horzcoef1[i]);
+ writel(sun4i_vert_coef[i], &de_fe->ch1_vertcoef[i]);
+ }
+
+ setbits_le32(&de_fe->frame_ctrl, SUNXI_DE_FE_FRAME_CTRL_COEF_RDY);
+}
+
+static void sunxi_frontend_mode_set(const struct ctfb_res_modes *mode,
+ unsigned int address)
+{
+ struct sunxi_de_fe_reg * const de_fe =
+ (struct sunxi_de_fe_reg *)SUNXI_DE_FE0_BASE;
+
+ setbits_le32(&de_fe->bypass, SUNXI_DE_FE_BYPASS_CSC_BYPASS);
+ writel(CONFIG_SYS_SDRAM_BASE + address, &de_fe->ch0_addr);
+ writel(mode->xres * 4, &de_fe->ch0_stride);
+ writel(SUNXI_DE_FE_INPUT_FMT_ARGB8888, &de_fe->input_fmt);
+ writel(SUNXI_DE_FE_OUTPUT_FMT_ARGB8888, &de_fe->output_fmt);
+
+ writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres),
+ &de_fe->ch0_insize);
+ writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres),
+ &de_fe->ch0_outsize);
+ writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch0_horzfact);
+ writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch0_vertfact);
+
+ writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres),
+ &de_fe->ch1_insize);
+ writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres),
+ &de_fe->ch1_outsize);
+ writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch1_horzfact);
+ writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch1_vertfact);
+
+ setbits_le32(&de_fe->frame_ctrl, SUNXI_DE_FE_FRAME_CTRL_REG_RDY);
+}
+
+static void sunxi_frontend_enable(void)
+{
+ struct sunxi_de_fe_reg * const de_fe =
+ (struct sunxi_de_fe_reg *)SUNXI_DE_FE0_BASE;
+
+ setbits_le32(&de_fe->frame_ctrl, SUNXI_DE_FE_FRAME_CTRL_FRM_START);
+}
+#else
+static void sunxi_frontend_init(void) {}
+static void sunxi_frontend_mode_set(const struct ctfb_res_modes *mode,
+ unsigned int address) {}
+static void sunxi_frontend_enable(void) {}
+#endif
+
/*
* This is the entity that mixes and matches the different layers and inputs.
* Allwinner calls it the back-end, but i like composer better.
(struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE;
int i;
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
+ sunxi_frontend_init();
+
+#ifdef CONFIG_SUNXI_GEN_SUN6I
/* Reset off */
setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_DE_BE0);
#endif
/* Clocks on */
setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_DE_BE0);
+#ifndef CONFIG_MACH_SUN4I /* On sun4i the frontend does the dma */
setbits_le32(&ccm->dram_clk_gate, 1 << CCM_DRAM_GATE_OFFSET_DE_BE0);
+#endif
clock_set_de_mod_clock(&ccm->be0_clk_cfg, 300000000);
/* Engine bug, clear registers after reset */
struct sunxi_de_be_reg * const de_be =
(struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE;
+ sunxi_frontend_mode_set(mode, address);
+
writel(SUNXI_DE_BE_HEIGHT(mode->yres) | SUNXI_DE_BE_WIDTH(mode->xres),
&de_be->disp_size);
writel(SUNXI_DE_BE_HEIGHT(mode->yres) | SUNXI_DE_BE_WIDTH(mode->xres),
&de_be->layer0_size);
+#ifndef CONFIG_MACH_SUN4I /* On sun4i the frontend does the dma */
writel(SUNXI_DE_BE_LAYER_STRIDE(mode->xres), &de_be->layer0_stride);
writel(address << 3, &de_be->layer0_addr_low32b);
writel(address >> 29, &de_be->layer0_addr_high4b);
+#else
+ writel(SUNXI_DE_BE_LAYER_ATTR0_SRC_FE0, &de_be->layer0_attr0_ctrl);
+#endif
writel(SUNXI_DE_BE_LAYER_ATTR1_FMT_XRGB8888, &de_be->layer0_attr1_ctrl);
setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_LAYER0_ENABLE);
struct sunxi_de_be_reg * const de_be =
(struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE;
+ sunxi_frontend_enable();
+
setbits_le32(&de_be->reg_ctrl, SUNXI_DE_BE_REG_CTRL_LOAD_REGS);
setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START);
}
(struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
/* Reset off */
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
+#ifdef CONFIG_SUNXI_GEN_SUN6I
setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD0);
#else
setbits_le32(&ccm->lcd0_ch0_clk_cfg, CCM_LCD_CH0_CTRL_RST);
/* Clock on */
setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD0);
#ifdef CONFIG_VIDEO_LCD_IF_LVDS
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+ setbits_le32(&ccm->ahb_reset2_cfg, 1 << AHB_RESET_OFFSET_LVDS);
+#else
setbits_le32(&ccm->lvds_clk_cfg, CCM_LVDS_CTRL_RST);
+#endif
#endif
/* Init lcdc */
#ifdef CONFIG_VIDEO_LCD_IF_LVDS
setbits_le32(&lcdc->tcon0_lvds_intf, SUNXI_LCDC_TCON0_LVDS_INTF_ENABLE);
setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0);
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+ udelay(2); /* delay at least 1200 ns */
+ setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_EN_MB);
+ udelay(2); /* delay at least 1200 ns */
+ setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_DRVC);
+ if (sunxi_display.depth == 18)
+ setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_DRVD(0x7));
+ else
+ setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_DRVD(0xf));
+#else
setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_UPDATE);
udelay(2); /* delay at least 1200 ns */
setbits_le32(&lcdc->lvds_ana1, SUNXI_LCDC_LVDS_ANA1_INIT1);
setbits_le32(&lcdc->lvds_ana1, SUNXI_LCDC_LVDS_ANA1_INIT2);
setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_UPDATE);
#endif
+#endif
}
static void sunxi_lcdc_panel_enable(void)
{
- int pin;
+ int pin, reset_pin;
/*
* Start with backlight disabled to avoid the screen flashing to
* white while the lcd inits.
*/
pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_EN);
- if (pin != -1) {
+ if (pin >= 0) {
gpio_request(pin, "lcd_backlight_enable");
gpio_direction_output(pin, 0);
}
pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_PWM);
- if (pin != -1) {
+ if (pin >= 0) {
gpio_request(pin, "lcd_backlight_pwm");
- /* backlight pwm is inverted, set to 1 to disable backlight */
- gpio_direction_output(pin, 1);
+ gpio_direction_output(pin, PWM_OFF);
+ }
+
+ reset_pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_RESET);
+ if (reset_pin >= 0) {
+ gpio_request(reset_pin, "lcd_reset");
+ gpio_direction_output(reset_pin, 0); /* Assert reset */
}
/* Give the backlight some time to turn off and power up the panel. */
mdelay(40);
pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_POWER);
- if (pin != -1) {
+ if (pin >= 0) {
gpio_request(pin, "lcd_power");
gpio_direction_output(pin, 1);
}
+
+ if (reset_pin >= 0)
+ gpio_direction_output(reset_pin, 1); /* De-assert reset */
}
static void sunxi_lcdc_backlight_enable(void)
mdelay(40);
pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_EN);
- if (pin != -1)
+ if (pin >= 0)
gpio_direction_output(pin, 1);
pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_PWM);
- if (pin != -1) {
- /* backlight pwm is inverted, set to 0 to enable backlight */
- gpio_direction_output(pin, 0);
- }
+ if (pin >= 0)
+ gpio_direction_output(pin, PWM_ON);
}
-static int sunxi_lcdc_get_clk_delay(const struct ctfb_res_modes *mode)
+static int sunxi_lcdc_get_clk_delay(const struct ctfb_res_modes *mode, int tcon)
{
int delay;
- delay = mode->lower_margin + mode->vsync_len + mode->upper_margin - 2;
+ delay = mode->lower_margin + mode->vsync_len + mode->upper_margin;
+ if (tcon == 1)
+ delay -= 2;
+
return (delay > 30) ? 30 : delay;
}
-static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode)
+static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode,
+ bool for_ext_vga_dac)
{
struct sunxi_lcdc_reg * const lcdc =
(struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
for (pin = SUNXI_GPD(0); pin <= SUNXI_GPD(27); pin++)
#ifdef CONFIG_VIDEO_LCD_IF_PARALLEL
- sunxi_gpio_set_cfgpin(pin, SUNXI_GPD0_LCD0);
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPD_LCD0);
#endif
#ifdef CONFIG_VIDEO_LCD_IF_LVDS
- sunxi_gpio_set_cfgpin(pin, SUNXI_GPD0_LVDS0);
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPD_LVDS0);
#endif
sunxi_lcdc_pll_set(0, mode->pixclock_khz, &clk_div, &clk_double);
clrsetbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_IO_MAP_MASK,
SUNXI_LCDC_CTRL_IO_MAP_TCON0);
- clk_delay = sunxi_lcdc_get_clk_delay(mode);
+ clk_delay = sunxi_lcdc_get_clk_delay(mode, 0);
writel(SUNXI_LCDC_TCON0_CTRL_ENABLE |
SUNXI_LCDC_TCON0_CTRL_CLK_DELAY(clk_delay), &lcdc->tcon0_ctrl);
#endif
#ifdef CONFIG_VIDEO_LCD_IF_LVDS
val = (sunxi_display.depth == 18) ? 1 : 0;
- writel(SUNXI_LCDC_TCON0_LVDS_INTF_BITWIDTH(val), &lcdc->tcon0_lvds_intf);
+ writel(SUNXI_LCDC_TCON0_LVDS_INTF_BITWIDTH(val) |
+ SUNXI_LCDC_TCON0_LVDS_CLK_SEL_TCON0, &lcdc->tcon0_lvds_intf);
#endif
if (sunxi_display.depth == 18 || sunxi_display.depth == 16) {
&lcdc->tcon0_frm_ctrl);
}
-#ifdef CONFIG_VIDEO_LCD_IF_PARALLEL
- val = SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE0;
-#endif
-#ifdef CONFIG_VIDEO_LCD_IF_LVDS
- val = SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE60;
-#endif
+ val = SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE(CONFIG_VIDEO_LCD_DCLK_PHASE);
if (!(mode->sync & FB_SYNC_HOR_HIGH_ACT))
val |= SUNXI_LCDC_TCON_HSYNC_MASK;
if (!(mode->sync & FB_SYNC_VERT_HIGH_ACT))
val |= SUNXI_LCDC_TCON_VSYNC_MASK;
+
+#ifdef CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH
+ if (for_ext_vga_dac)
+ val = 0;
+#endif
writel(val, &lcdc->tcon0_io_polarity);
writel(0, &lcdc->tcon0_io_tristate);
clrsetbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_IO_MAP_MASK,
SUNXI_LCDC_CTRL_IO_MAP_TCON1);
- clk_delay = sunxi_lcdc_get_clk_delay(mode);
+ clk_delay = sunxi_lcdc_get_clk_delay(mode, 1);
writel(SUNXI_LCDC_TCON1_CTRL_ENABLE |
SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(clk_delay), &lcdc->tcon1_ctrl);
&lcdc->tcon1_timing_sync);
if (use_portd_hvsync) {
- sunxi_gpio_set_cfgpin(SUNXI_GPD(26), SUNXI_GPD0_LCD0);
- sunxi_gpio_set_cfgpin(SUNXI_GPD(27), SUNXI_GPD0_LCD0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPD(26), SUNXI_GPD_LCD0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPD(27), SUNXI_GPD_LCD0);
val = 0;
if (mode->sync & FB_SYNC_HOR_HIGH_ACT)
static void sunxi_drc_init(void)
{
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
+#ifdef CONFIG_SUNXI_GEN_SUN6I
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
/* On sun6i the drc must be clocked even when in pass-through mode */
+#ifdef CONFIG_MACH_SUN8I_A33
+ setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_SAT);
+#endif
setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_DRC0);
clock_set_de_mod_clock(&ccm->iep_drc0_clk_cfg, 300000000);
#endif
}
+#ifdef CONFIG_VIDEO_VGA_VIA_LCD
+static void sunxi_vga_external_dac_enable(void)
+{
+ int pin;
+
+ pin = sunxi_name_to_gpio(CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN);
+ if (pin >= 0) {
+ gpio_request(pin, "vga_enable");
+ gpio_direction_output(pin, 1);
+ }
+}
+#endif /* CONFIG_VIDEO_VGA_VIA_LCD */
+
+#ifdef CONFIG_VIDEO_LCD_SSD2828
+static int sunxi_ssd2828_init(const struct ctfb_res_modes *mode)
+{
+ struct ssd2828_config cfg = {
+ .csx_pin = name_to_gpio(CONFIG_VIDEO_LCD_SPI_CS),
+ .sck_pin = name_to_gpio(CONFIG_VIDEO_LCD_SPI_SCLK),
+ .sdi_pin = name_to_gpio(CONFIG_VIDEO_LCD_SPI_MOSI),
+ .sdo_pin = name_to_gpio(CONFIG_VIDEO_LCD_SPI_MISO),
+ .reset_pin = name_to_gpio(CONFIG_VIDEO_LCD_SSD2828_RESET),
+ .ssd2828_tx_clk_khz = CONFIG_VIDEO_LCD_SSD2828_TX_CLK * 1000,
+ .ssd2828_color_depth = 24,
+#ifdef CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828
+ .mipi_dsi_number_of_data_lanes = 4,
+ .mipi_dsi_bitrate_per_data_lane_mbps = 513,
+ .mipi_dsi_delay_after_exit_sleep_mode_ms = 100,
+ .mipi_dsi_delay_after_set_display_on_ms = 200
+#else
+#error MIPI LCD panel needs configuration parameters
+#endif
+ };
+
+ if (cfg.csx_pin == -1 || cfg.sck_pin == -1 || cfg.sdi_pin == -1) {
+ printf("SSD2828: SPI pins are not properly configured\n");
+ return 1;
+ }
+ if (cfg.reset_pin == -1) {
+ printf("SSD2828: Reset pin is not properly configured\n");
+ return 1;
+ }
+
+ return ssd2828_init(&cfg, mode);
+}
+#endif /* CONFIG_VIDEO_LCD_SSD2828 */
+
static void sunxi_engines_init(void)
{
sunxi_composer_init();
break;
case sunxi_monitor_lcd:
sunxi_lcdc_panel_enable();
+ if (IS_ENABLED(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM)) {
+ mdelay(50); /* Wait for lcd controller power on */
+ hitachi_tx18d42vm_init();
+ }
+ if (IS_ENABLED(CONFIG_VIDEO_LCD_TL059WV5C0)) {
+ unsigned int orig_i2c_bus = i2c_get_bus_num();
+ i2c_set_bus_num(CONFIG_VIDEO_LCD_I2C_BUS);
+ i2c_reg_write(0x5c, 0x04, 0x42); /* Turn on the LCD */
+ i2c_set_bus_num(orig_i2c_bus);
+ }
sunxi_composer_mode_set(mode, address);
- sunxi_lcdc_tcon0_mode_set(mode);
+ sunxi_lcdc_tcon0_mode_set(mode, false);
sunxi_composer_enable();
sunxi_lcdc_enable();
+#ifdef CONFIG_VIDEO_LCD_SSD2828
+ sunxi_ssd2828_init(mode);
+#endif
sunxi_lcdc_backlight_enable();
break;
case sunxi_monitor_vga:
sunxi_vga_enable();
#elif defined CONFIG_VIDEO_VGA_VIA_LCD
sunxi_composer_mode_set(mode, address);
- sunxi_lcdc_tcon0_mode_set(mode);
+ sunxi_lcdc_tcon0_mode_set(mode, true);
sunxi_composer_enable();
sunxi_lcdc_enable();
+ sunxi_vga_external_dac_enable();
#endif
break;
}
return NULL; /* never reached */
}
+ulong board_get_usable_ram_top(ulong total_size)
+{
+ return gd->ram_top - CONFIG_SUNXI_MAX_FB_SIZE;
+}
+
+static bool sunxi_has_hdmi(void)
+{
+#ifdef CONFIG_VIDEO_HDMI
+ return true;
+#else
+ return false;
+#endif
+}
+
+static bool sunxi_has_lcd(void)
+{
+ char *lcd_mode = CONFIG_VIDEO_LCD_MODE;
+
+ return lcd_mode[0] != 0;
+}
+
+static bool sunxi_has_vga(void)
+{
+#if defined CONFIG_VIDEO_VGA || defined CONFIG_VIDEO_VGA_VIA_LCD
+ return true;
+#else
+ return false;
+#endif
+}
+
+static enum sunxi_monitor sunxi_get_default_mon(bool allow_hdmi)
+{
+ if (allow_hdmi && sunxi_has_hdmi())
+ return sunxi_monitor_dvi;
+ else if (sunxi_has_lcd())
+ return sunxi_monitor_lcd;
+ else if (sunxi_has_vga())
+ return sunxi_monitor_vga;
+ else
+ return sunxi_monitor_none;
+}
+
void *video_hw_init(void)
{
static GraphicDevice *graphic_device = &sunxi_display.graphic_device;
memset(&sunxi_display, 0, sizeof(struct sunxi_display));
- printf("Reserved %dkB of RAM for Framebuffer.\n",
- CONFIG_SUNXI_FB_SIZE >> 10);
- gd->fb_base = gd->ram_top;
-
video_get_ctfb_res_modes(RES_MODE_1024x768, 24, &mode,
&sunxi_display.depth, &options);
#ifdef CONFIG_VIDEO_HDMI
hpd = video_get_option_int(options, "hpd", 1);
hpd_delay = video_get_option_int(options, "hpd_delay", 500);
edid = video_get_option_int(options, "edid", 1);
- sunxi_display.monitor = sunxi_monitor_dvi;
-#elif defined CONFIG_VIDEO_VGA_VIA_LCD
- sunxi_display.monitor = sunxi_monitor_vga;
-#else
- sunxi_display.monitor = sunxi_monitor_lcd;
#endif
+ sunxi_display.monitor = sunxi_get_default_mon(true);
video_get_option_string(options, "monitor", mon, sizeof(mon),
sunxi_get_mon_desc(sunxi_display.monitor));
for (i = 0; i <= SUNXI_MONITOR_LAST; i++) {
mode = &custom;
} else if (hpd) {
sunxi_hdmi_shutdown();
- /* Fallback to lcd / vga / none */
- if (lcd_mode[0]) {
- sunxi_display.monitor = sunxi_monitor_lcd;
- } else {
-#if defined CONFIG_VIDEO_VGA_VIA_LCD || defined CONFIG_VIDEO_VGA
- sunxi_display.monitor = sunxi_monitor_vga;
-#else
- sunxi_display.monitor = sunxi_monitor_none;
-#endif
- }
+ sunxi_display.monitor = sunxi_get_default_mon(false);
} /* else continue with hdmi/dvi without a cable connected */
}
#endif
return NULL;
case sunxi_monitor_dvi:
case sunxi_monitor_hdmi:
-#ifdef CONFIG_VIDEO_HDMI
+ if (!sunxi_has_hdmi()) {
+ printf("HDMI/DVI not supported on this board\n");
+ sunxi_display.monitor = sunxi_monitor_none;
+ return NULL;
+ }
break;
-#else
- printf("HDMI/DVI not supported on this board\n");
- sunxi_display.monitor = sunxi_monitor_none;
- return NULL;
-#endif
case sunxi_monitor_lcd:
- if (lcd_mode[0]) {
- sunxi_display.depth = video_get_params(&custom, lcd_mode);
- mode = &custom;
- break;
+ if (!sunxi_has_lcd()) {
+ printf("LCD not supported on this board\n");
+ sunxi_display.monitor = sunxi_monitor_none;
+ return NULL;
}
- printf("LCD not supported on this board\n");
- sunxi_display.monitor = sunxi_monitor_none;
- return NULL;
+ sunxi_display.depth = video_get_params(&custom, lcd_mode);
+ mode = &custom;
+ break;
case sunxi_monitor_vga:
-#if defined CONFIG_VIDEO_VGA_VIA_LCD || defined CONFIG_VIDEO_VGA
+ if (!sunxi_has_vga()) {
+ printf("VGA not supported on this board\n");
+ sunxi_display.monitor = sunxi_monitor_none;
+ return NULL;
+ }
sunxi_display.depth = 18;
break;
-#else
- printf("VGA not supported on this board\n");
- sunxi_display.monitor = sunxi_monitor_none;
- return NULL;
-#endif
}
if (mode->vmode != FB_VMODE_NONINTERLACED) {
mode->yres, sunxi_get_mon_desc(sunxi_display.monitor));
}
+ sunxi_display.fb_size =
+ (mode->xres * mode->yres * 4 + 0xfff) & ~0xfff;
+ if (sunxi_display.fb_size > CONFIG_SUNXI_MAX_FB_SIZE) {
+ printf("Error need %dkB for fb, but only %dkB is reserved\n",
+ sunxi_display.fb_size >> 10,
+ CONFIG_SUNXI_MAX_FB_SIZE >> 10);
+ return NULL;
+ }
+
+ gd->fb_base = gd->bd->bi_dram[0].start +
+ gd->bd->bi_dram[0].size - sunxi_display.fb_size;
sunxi_engines_init();
sunxi_mode_set(mode, gd->fb_base - CONFIG_SYS_SDRAM_BASE);
{
static GraphicDevice *graphic_device = &sunxi_display.graphic_device;
int offset, ret;
+ u64 start, size;
const char *pipeline = NULL;
+#ifdef CONFIG_MACH_SUN4I
+#define PIPELINE_PREFIX "de_fe0-"
+#else
+#define PIPELINE_PREFIX
+#endif
+
switch (sunxi_display.monitor) {
case sunxi_monitor_none:
return 0;
case sunxi_monitor_dvi:
case sunxi_monitor_hdmi:
- pipeline = "de_be0-lcd0-hdmi";
+ pipeline = PIPELINE_PREFIX "de_be0-lcd0-hdmi";
break;
case sunxi_monitor_lcd:
- pipeline = "de_be0-lcd0";
+ pipeline = PIPELINE_PREFIX "de_be0-lcd0";
break;
case sunxi_monitor_vga:
#ifdef CONFIG_VIDEO_VGA
- pipeline = "de_be0-lcd0-tve0";
+ pipeline = PIPELINE_PREFIX "de_be0-lcd0-tve0";
#elif defined CONFIG_VIDEO_VGA_VIA_LCD
- pipeline = "de_be0-lcd0";
+ pipeline = PIPELINE_PREFIX "de_be0-lcd0";
#endif
break;
}
return 0; /* Keep older kernels working */
}
+ /*
+ * Do not report the framebuffer as free RAM to the OS, note we cannot
+ * use fdt_add_mem_rsv() here, because then it is still seen as RAM,
+ * and e.g. Linux refuses to iomap RAM on ARM, see:
+ * linux/arch/arm/mm/ioremap.c around line 301.
+ */
+ start = gd->bd->bi_dram[0].start;
+ size = gd->bd->bi_dram[0].size - sunxi_display.fb_size;
+ ret = fdt_fixup_memory_banks(blob, &start, &size, 1);
+ if (ret) {
+ eprintf("Cannot setup simplefb: Error reserving memory\n");
+ return ret;
+ }
+
ret = fdt_setup_simplefb_node(blob, offset, gd->fb_base,
graphic_device->winSizeX, graphic_device->winSizeY,
graphic_device->winSizeX * graphic_device->gdfBytesPP,