]> git.karo-electronics.de Git - karo-tx-linux.git/blobdiff - drivers/w1/masters/mxc_w1.c
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve...
[karo-tx-linux.git] / drivers / w1 / masters / mxc_w1.c
index 1e5d94c5afc9668af993bacbdcc2ea8a6e1de497..67b067a3e2abbcddadd60a4b9051fb23e5392f45 100644 (file)
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
  */
 
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
 #include <linux/clk.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
 
 #include "../w1.h"
 #include "../w1_int.h"
-#include "../w1_log.h"
 
 /* According to the mx27 Datasheet the reset procedure should take up to about
  * 1350us. We set the timeout to 500*100us = 50ms for sure */
 /*
  * MXC W1 Register offsets
  */
-#define MXC_W1_CONTROL          0x00
-#define MXC_W1_TIME_DIVIDER     0x02
-#define MXC_W1_RESET            0x04
-#define MXC_W1_COMMAND          0x06
-#define MXC_W1_TXRX             0x08
-#define MXC_W1_INTERRUPT        0x0A
-#define MXC_W1_INTERRUPT_EN     0x0C
+#define MXC_W1_CONTROL         0x00
+# define MXC_W1_CONTROL_RDST   BIT(3)
+# define MXC_W1_CONTROL_WR(x)  BIT(5 - (x))
+# define MXC_W1_CONTROL_PST    BIT(6)
+# define MXC_W1_CONTROL_RPP    BIT(7)
+#define MXC_W1_TIME_DIVIDER    0x02
+#define MXC_W1_RESET           0x04
 
 struct mxc_w1_device {
        void __iomem *regs;
@@ -61,12 +53,12 @@ static u8 mxc_w1_ds2_reset_bus(void *data)
        unsigned int timeout_cnt = 0;
        struct mxc_w1_device *dev = data;
 
-       __raw_writeb(0x80, (dev->regs + MXC_W1_CONTROL));
+       writeb(MXC_W1_CONTROL_RPP, (dev->regs + MXC_W1_CONTROL));
 
        while (1) {
-               reg_val = __raw_readb(dev->regs + MXC_W1_CONTROL);
+               reg_val = readb(dev->regs + MXC_W1_CONTROL);
 
-               if (((reg_val >> 7) & 0x1) == 0 ||
+               if (!(reg_val & MXC_W1_CONTROL_RPP) ||
                    timeout_cnt > MXC_W1_RESET_TIMEOUT)
                        break;
                else
@@ -74,7 +66,7 @@ static u8 mxc_w1_ds2_reset_bus(void *data)
 
                udelay(100);
        }
-       return (reg_val >> 7) & 0x1;
+       return !!(reg_val & MXC_W1_CONTROL_PST);
 }
 
 /*
@@ -90,16 +82,16 @@ static u8 mxc_w1_ds2_touch_bit(void *data, u8 bit)
                                         * datasheet.
                                         */
 
-       __raw_writeb((1 << (5 - bit)), ctrl_addr);
+       writeb(MXC_W1_CONTROL_WR(bit), ctrl_addr);
 
        while (timeout_cnt--) {
-               if (!((__raw_readb(ctrl_addr) >> (5 - bit)) & 0x1))
+               if (!(readb(ctrl_addr) & MXC_W1_CONTROL_WR(bit)))
                        break;
 
                udelay(1);
        }
 
-       return ((__raw_readb(ctrl_addr)) >> 3) & 0x1;
+       return !!(readb(ctrl_addr) & MXC_W1_CONTROL_RDST);
 }
 
 static int mxc_w1_probe(struct platform_device *pdev)
@@ -139,7 +131,7 @@ static int mxc_w1_probe(struct platform_device *pdev)
        if (err)
                return err;
 
-       __raw_writeb(clkdiv - 1, mdev->regs + MXC_W1_TIME_DIVIDER);
+       writeb(clkdiv - 1, mdev->regs + MXC_W1_TIME_DIVIDER);
 
        mdev->bus_master.data = mdev;
        mdev->bus_master.reset_bus = mxc_w1_ds2_reset_bus;
@@ -177,6 +169,7 @@ MODULE_DEVICE_TABLE(of, mxc_w1_dt_ids);
 static struct platform_driver mxc_w1_driver = {
        .driver = {
                .name = "mxc_w1",
+               .owner = THIS_MODULE,
                .of_match_table = mxc_w1_dt_ids,
        },
        .probe = mxc_w1_probe,