* Copyright 1992, Linus Torvalds.
*/
-#include <asm/alternative.h>
-
-#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 1)
-/* Technically wrong, but this avoids compilation errors on some gcc
- versions. */
-#define ADDR "=m" (*(volatile long *) addr)
-#else
-#define ADDR "+m" (*(volatile long *) addr)
-#endif
-
-/**
- * set_bit - Atomically set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * This function is atomic and may not be reordered. See __set_bit()
- * if you do not require the atomic guarantees.
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static __inline__ void set_bit(int nr, volatile void * addr)
-{
- __asm__ __volatile__( LOCK_PREFIX
- "btsl %1,%0"
- :ADDR
- :"dIr" (nr) : "memory");
-}
-
-/**
- * __set_bit - Set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * Unlike set_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __inline__ void __set_bit(int nr, volatile void * addr)
-{
- __asm__ volatile(
- "btsl %1,%0"
- :ADDR
- :"dIr" (nr) : "memory");
-}
-
-/**
- * clear_bit - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * clear_bit() is atomic and may not be reordered. However, it does
- * not contain a memory barrier, so if it is used for locking purposes,
- * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
- * in order to ensure changes are visible on other processors.
- */
-static __inline__ void clear_bit(int nr, volatile void * addr)
-{
- __asm__ __volatile__( LOCK_PREFIX
- "btrl %1,%0"
- :ADDR
- :"dIr" (nr));
-}
-
-static __inline__ void __clear_bit(int nr, volatile void * addr)
-{
- __asm__ __volatile__(
- "btrl %1,%0"
- :ADDR
- :"dIr" (nr));
-}
-
-#define smp_mb__before_clear_bit() barrier()
-#define smp_mb__after_clear_bit() barrier()
-
-/**
- * __change_bit - Toggle a bit in memory
- * @nr: the bit to change
- * @addr: the address to start counting from
- *
- * Unlike change_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __inline__ void __change_bit(int nr, volatile void * addr)
-{
- __asm__ __volatile__(
- "btcl %1,%0"
- :ADDR
- :"dIr" (nr));
-}
-
-/**
- * change_bit - Toggle a bit in memory
- * @nr: Bit to change
- * @addr: Address to start counting from
- *
- * change_bit() is atomic and may not be reordered.
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static __inline__ void change_bit(int nr, volatile void * addr)
-{
- __asm__ __volatile__( LOCK_PREFIX
- "btcl %1,%0"
- :ADDR
- :"dIr" (nr));
-}
-
-/**
- * test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static __inline__ int test_and_set_bit(int nr, volatile void * addr)
-{
- int oldbit;
-
- __asm__ __volatile__( LOCK_PREFIX
- "btsl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),ADDR
- :"dIr" (nr) : "memory");
- return oldbit;
-}
-
-/**
- * __test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail. You must protect multiple accesses with a lock.
- */
-static __inline__ int __test_and_set_bit(int nr, volatile void * addr)
-{
- int oldbit;
-
- __asm__(
- "btsl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),ADDR
- :"dIr" (nr));
- return oldbit;
-}
-
-/**
- * test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static __inline__ int test_and_clear_bit(int nr, volatile void * addr)
-{
- int oldbit;
-
- __asm__ __volatile__( LOCK_PREFIX
- "btrl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),ADDR
- :"dIr" (nr) : "memory");
- return oldbit;
-}
-
-/**
- * __test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail. You must protect multiple accesses with a lock.
- */
-static __inline__ int __test_and_clear_bit(int nr, volatile void * addr)
-{
- int oldbit;
-
- __asm__(
- "btrl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),ADDR
- :"dIr" (nr));
- return oldbit;
-}
-
-/* WARNING: non atomic and it can be reordered! */
-static __inline__ int __test_and_change_bit(int nr, volatile void * addr)
-{
- int oldbit;
-
- __asm__ __volatile__(
- "btcl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),ADDR
- :"dIr" (nr) : "memory");
- return oldbit;
-}
-
-/**
- * test_and_change_bit - Change a bit and return its old value
- * @nr: Bit to change
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static __inline__ int test_and_change_bit(int nr, volatile void * addr)
-{
- int oldbit;
-
- __asm__ __volatile__( LOCK_PREFIX
- "btcl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),ADDR
- :"dIr" (nr) : "memory");
- return oldbit;
-}
-
-#if 0 /* Fool kernel-doc since it doesn't do macros yet */
-/**
- * test_bit - Determine whether a bit is set
- * @nr: bit number to test
- * @addr: Address to start counting from
- */
-static int test_bit(int nr, const volatile void * addr);
-#endif
-
-static __inline__ int constant_test_bit(int nr, const volatile void * addr)
-{
- return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
-}
-
-static __inline__ int variable_test_bit(int nr, volatile const void * addr)
-{
- int oldbit;
-
- __asm__ __volatile__(
- "btl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit)
- :"m" (*(volatile long *)addr),"dIr" (nr));
- return oldbit;
-}
-
-#define test_bit(nr,addr) \
-(__builtin_constant_p(nr) ? \
- constant_test_bit((nr),(addr)) : \
- variable_test_bit((nr),(addr)))
-
-#undef ADDR
-
-extern long find_first_zero_bit(const unsigned long * addr, unsigned long size);
-extern long find_next_zero_bit (const unsigned long * addr, long size, long offset);
-extern long find_first_bit(const unsigned long * addr, unsigned long size);
-extern long find_next_bit(const unsigned long * addr, long size, long offset);
+extern long find_first_zero_bit(const unsigned long *addr, unsigned long size);
+extern long find_next_zero_bit(const unsigned long *addr, long size, long offset);
+extern long find_first_bit(const unsigned long *addr, unsigned long size);
+extern long find_next_bit(const unsigned long *addr, long size, long offset);
/* return index of first bet set in val or max when no bit is set */
static inline long __scanbit(unsigned long val, unsigned long max)
*
* Undefined if no zero exists, so code should check against ~0UL first.
*/
-static __inline__ unsigned long ffz(unsigned long word)
+static inline unsigned long ffz(unsigned long word)
{
__asm__("bsfq %1,%0"
:"=r" (word)
*
* Undefined if no bit exists, so code should check against 0 first.
*/
-static __inline__ unsigned long __ffs(unsigned long word)
+static inline unsigned long __ffs(unsigned long word)
{
__asm__("bsfq %1,%0"
:"=r" (word)
*
* Undefined if no zero exists, so code should check against ~0UL first.
*/
-static __inline__ unsigned long __fls(unsigned long word)
+static inline unsigned long __fls(unsigned long word)
{
__asm__("bsrq %1,%0"
:"=r" (word)
* the libc and compiler builtin ffs routines, therefore
* differs in spirit from the above ffz (man ffs).
*/
-static __inline__ int ffs(int x)
+static inline int ffs(int x)
{
int r;
*
* This is defined the same way as fls.
*/
-static __inline__ int fls64(__u64 x)
+static inline int fls64(__u64 x)
{
if (x == 0)
return 0;
*
* This is defined the same way as ffs.
*/
-static __inline__ int fls(int x)
+static inline int fls(int x)
{
int r;