extern void fpu_init(void);
extern void mxcsr_feature_mask_init(void);
-extern void init_fpu(struct task_struct *child);
+extern int init_fpu(struct task_struct *child);
extern asmlinkage void math_state_restore(void);
+extern void init_thread_xstate(void);
extern user_regset_active_fn fpregs_active, xfpregs_active;
extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get;
{
asm volatile("1: fwait\n"
"2:\n"
- _ASM_EXTABLE(1b,2b));
+ _ASM_EXTABLE(1b, 2b));
}
static inline int restore_fpu_checking(struct i387_fxsave_struct *fx)
"3: movl $-1,%[err]\n"
" jmp 2b\n"
".previous\n"
- _ASM_EXTABLE(1b,3b)
+ _ASM_EXTABLE(1b, 3b)
: [err] "=r" (err)
#if 0 /* See comment in __save_init_fpu() below. */
: [fx] "r" (fx), "m" (*fx), "0" (0));
static inline void clear_fpu_state(struct i387_fxsave_struct *fx)
{
if (unlikely(fx->swd & X87_FSW_ES))
- asm volatile("fnclex");
+ asm volatile("fnclex");
alternative_input(ASM_NOP8 ASM_NOP2,
- " emms\n" /* clear stack tags */
- " fildl %%gs:0", /* load to clear state */
- X86_FEATURE_FXSAVE_LEAK);
+ " emms\n" /* clear stack tags */
+ " fildl %%gs:0", /* load to clear state */
+ X86_FEATURE_FXSAVE_LEAK);
}
static inline int save_i387_checking(struct i387_fxsave_struct __user *fx)
"3: movl $-1,%[err]\n"
" jmp 2b\n"
".previous\n"
- _ASM_EXTABLE(1b,3b)
+ _ASM_EXTABLE(1b, 3b)
: [err] "=r" (err), "=m" (*fx)
#if 0 /* See comment in __fxsave_clear() below. */
: [fx] "r" (fx), "0" (0));
#else
: [fx] "cdaSDb" (fx), "0" (0));
#endif
- if (unlikely(err) && __clear_user(fx, sizeof(struct i387_fxsave_struct)))
+ if (unlikely(err) &&
+ __clear_user(fx, sizeof(struct i387_fxsave_struct)))
err = -EFAULT;
/* No need to clear here because the caller clears USED_MATH */
return err;
/* Using "fxsaveq %0" would be the ideal choice, but is only supported
starting with gas 2.16. */
__asm__ __volatile__("fxsaveq %0"
- : "=m" (tsk->thread.i387.fxsave));
+ : "=m" (tsk->thread.xstate->fxsave));
#elif 0
/* Using, as a workaround, the properly prefixed form below isn't
accepted by any binutils version so far released, complaining that
the same type of prefix is used twice if an extended register is
needed for addressing (fix submitted to mainline 2005-11-21). */
__asm__ __volatile__("rex64/fxsave %0"
- : "=m" (tsk->thread.i387.fxsave));
+ : "=m" (tsk->thread.xstate->fxsave));
#else
/* This, however, we can work around by forcing the compiler to select
an addressing mode that doesn't require extended registers. */
- __asm__ __volatile__("rex64/fxsave %P2(%1)"
- : "=m" (tsk->thread.i387.fxsave)
- : "cdaSDb" (tsk),
- "i" (offsetof(__typeof__(*tsk),
- thread.i387.fxsave)));
+ __asm__ __volatile__("rex64/fxsave (%1)"
+ : "=m" (tsk->thread.xstate->fxsave)
+ : "cdaSDb" (&tsk->thread.xstate->fxsave));
#endif
- clear_fpu_state(&tsk->thread.i387.fxsave);
+ clear_fpu_state(&tsk->thread.xstate->fxsave);
task_thread_info(tsk)->status &= ~TS_USEDFPU;
}
-/*
- * Signal frame handlers.
- */
-
-static inline int save_i387(struct _fpstate __user *buf)
-{
- struct task_struct *tsk = current;
- int err = 0;
-
- BUILD_BUG_ON(sizeof(struct user_i387_struct) !=
- sizeof(tsk->thread.i387.fxsave));
-
- if ((unsigned long)buf % 16)
- printk("save_i387: bad fpstate %p\n", buf);
-
- if (!used_math())
- return 0;
- clear_used_math(); /* trigger finit */
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- err = save_i387_checking((struct i387_fxsave_struct __user *)buf);
- if (err) return err;
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- stts();
- } else {
- if (__copy_to_user(buf, &tsk->thread.i387.fxsave,
- sizeof(struct i387_fxsave_struct)))
- return -1;
- }
- return 1;
-}
-
-/*
- * This restores directly out of user space. Exceptions are handled.
- */
-static inline int restore_i387(struct _fpstate __user *buf)
-{
- set_used_math();
- if (!(task_thread_info(current)->status & TS_USEDFPU)) {
- clts();
- task_thread_info(current)->status |= TS_USEDFPU;
- }
- return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
-}
-
#else /* CONFIG_X86_32 */
+extern void finit(void);
+
static inline void tolerant_fwait(void)
{
asm volatile("fnclex ; fwait");
"nop ; frstor %1",
"fxrstor %1",
X86_FEATURE_FXSR,
- "m" ((tsk)->thread.i387.fxsave));
+ "m" (tsk->thread.xstate->fxsave));
}
/* We need a safe address that is cheap to find and that is already
"fxsave %[fx]\n"
"bt $7,%[fsw] ; jnc 1f ; fnclex\n1:",
X86_FEATURE_FXSR,
- [fx] "m" (tsk->thread.i387.fxsave),
- [fsw] "m" (tsk->thread.i387.fxsave.swd) : "memory");
+ [fx] "m" (tsk->thread.xstate->fxsave),
+ [fsw] "m" (tsk->thread.xstate->fxsave.swd) : "memory");
/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
is pending. Clear the x87 state here by setting it to fixed
values. safe_address is a random variable that should be in L1 */
static inline unsigned short get_fpu_cwd(struct task_struct *tsk)
{
if (cpu_has_fxsr) {
- return tsk->thread.i387.fxsave.cwd;
+ return tsk->thread.xstate->fxsave.cwd;
} else {
- return (unsigned short)tsk->thread.i387.fsave.cwd;
+ return (unsigned short)tsk->thread.xstate->fsave.cwd;
}
}
static inline unsigned short get_fpu_swd(struct task_struct *tsk)
{
if (cpu_has_fxsr) {
- return tsk->thread.i387.fxsave.swd;
+ return tsk->thread.xstate->fxsave.swd;
} else {
- return (unsigned short)tsk->thread.i387.fsave.swd;
+ return (unsigned short)tsk->thread.xstate->fsave.swd;
}
}
static inline unsigned short get_fpu_mxcsr(struct task_struct *tsk)
{
if (cpu_has_xmm) {
- return tsk->thread.i387.fxsave.mxcsr;
+ return tsk->thread.xstate->fxsave.mxcsr;
} else {
return MXCSR_DEFAULT;
}