#include <linux/stringify.h>
#include <asm/ptrace.h>
#include <stdarg.h>
+#include <linux/kernel.h>
#if defined(CONFIG_PCI) && defined(CONFIG_4xx)
#include <pci.h>
#endif
#ifdef CONFIG_4xx
#include <asm/ppc4xx.h>
#endif
-#ifdef CONFIG_HYMOD
-#include <board/hymod/hymod.h>
-#endif
-#ifdef CONFIG_ARM
-#define asmlinkage /* nothing */
-#endif
#ifdef CONFIG_BLACKFIN
#include <asm/blackfin.h>
#endif
#include <flash.h>
#include <image.h>
+/* Bring in printf format macros if inttypes.h is included */
+#define __STDC_FORMAT_MACROS
+
#ifdef __LP64__
#define CONFIG_SYS_SUPPORT_64BIT_DATA
#endif
#define _DEBUG 0
#endif
+#ifndef pr_fmt
+#define pr_fmt(fmt) fmt
+#endif
+
/*
* Output a debug text when condition "cond" is met. The "cond" should be
* computed by a preprocessor in the best case, allowing for the best
* optimization.
*/
-#define debug_cond(cond, fmt, args...) \
- do { \
- if (cond) \
- printf(fmt, ##args); \
+#define debug_cond(cond, fmt, args...) \
+ do { \
+ if (cond) \
+ printf(pr_fmt(fmt), ##args); \
} while (0)
#define debug(fmt, args...) \
__assert_fail(#x, __FILE__, __LINE__, __func__); })
#define error(fmt, args...) do { \
- printf("ERROR: " fmt "\nat %s:%d/%s()\n", \
+ printf("ERROR: " pr_fmt(fmt) "\nat %s:%d/%s()\n", \
##args, __FILE__, __LINE__, __func__); \
} while (0)
# endif
#endif
-/*
- * General Purpose Utilities
- */
-#define min(X, Y) \
- ({ typeof(X) __x = (X); \
- typeof(Y) __y = (Y); \
- (__x < __y) ? __x : __y; })
-
-#define max(X, Y) \
- ({ typeof(X) __x = (X); \
- typeof(Y) __y = (Y); \
- (__x > __y) ? __x : __y; })
-
-#define MIN(x, y) min(x, y)
-#define MAX(x, y) max(x, y)
-
-#define min3(X, Y, Z) \
- ({ typeof(X) __x = (X); \
- typeof(Y) __y = (Y); \
- typeof(Z) __z = (Z); \
- __x < __y ? (__x < __z ? __x : __z) : \
- (__y < __z ? __y : __z); })
-
-#define max3(X, Y, Z) \
- ({ typeof(X) __x = (X); \
- typeof(Y) __y = (Y); \
- typeof(Z) __z = (Z); \
- __x > __y ? (__x > __z ? __x : __z) : \
- (__y > __z ? __y : __z); })
-
-#define MIN3(x, y, z) min3(x, y, z)
-#define MAX3(x, y, z) max3(x, y, z)
-
-/*
- * Return the absolute value of a number.
- *
- * This handles unsigned and signed longs, ints, shorts and chars. For all
- * input types abs() returns a signed long.
- *
- * For 64-bit types, use abs64()
- */
-#define abs(x) ({ \
- long ret; \
- if (sizeof(x) == sizeof(long)) { \
- long __x = (x); \
- ret = (__x < 0) ? -__x : __x; \
- } else { \
- int __x = (x); \
- ret = (__x < 0) ? -__x : __x; \
- } \
- ret; \
- })
-
-#define abs64(x) ({ \
- s64 __x = (x); \
- (__x < 0) ? -__x : __x; \
- })
-
#if defined(CONFIG_ENV_IS_EMBEDDED)
#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
#elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
#endif
-/**
- * container_of - cast a member of a structure out to the containing structure
- * @ptr: the pointer to the member.
- * @type: the type of the container struct this is embedded in.
- * @member: the name of the member within the struct.
- *
- */
-#define container_of(ptr, type, member) ({ \
- const typeof( ((type *)0)->member ) *__mptr = (ptr); \
- (type *)( (char *)__mptr - offsetof(type,member) );})
-
/*
* Function Prototypes
*/
+int dram_init(void);
void hang (void) __attribute__ ((noreturn));
/* */
phys_size_t initdram (int);
int display_options (void);
-void print_size(unsigned long long, const char *);
+
+/**
+ * print_size() - Print a size with a suffic
+ *
+ * print sizes as "xxx KiB", "xxx.y KiB", "xxx MiB", "xxx.y MiB",
+ * xxx GiB, xxx.y GiB, etc as needed; allow for optional trailing string
+ * (like "\n")
+ *
+ * @size: Size to print
+ * @suffix String to print after the size
+ */
+void print_size(uint64_t size, const char *suffix);
+
int print_buffer(ulong addr, const void *data, uint width, uint count,
uint linelen);
extern char console_buffer[];
/* arch/$(ARCH)/lib/board.c */
-void board_init_f(ulong);
-void board_init_r (gd_t *, ulong) __attribute__ ((noreturn));
-int checkboard (void);
-int checkflash (void);
-int checkdram (void);
-int last_stage_init(void);
+void board_init_f(ulong);
+void board_init_r(gd_t *, ulong) __attribute__ ((noreturn));
+int checkboard(void);
+int show_board_info(void);
+int checkflash(void);
+int checkdram(void);
+int last_stage_init(void);
extern ulong monitor_flash_len;
int mac_read_from_eeprom(void);
extern u8 __dtb_dt_begin[]; /* embedded device tree blob */
int update_flash_size(int flash_size);
int arch_early_init_r(void);
+/**
+ * Reserve all necessary stacks
+ *
+ * This is used in generic board init sequence in common/board_f.c. Each
+ * architecture could provide this function to tailor the required stacks.
+ *
+ * On entry gd->start_addr_sp is pointing to the suggested top of the stack.
+ * The callee ensures gd->start_add_sp is 16-byte aligned, so architectures
+ * require only this can leave it untouched.
+ *
+ * On exit gd->start_addr_sp and gd->irq_sp should be set to the respective
+ * positions of the stack. The stack pointer(s) will be set to this later.
+ * gd->irq_sp is only required, if the architecture needs it.
+ *
+ * @return 0 if no error
+ */
+__weak int arch_reserve_stacks(void);
+
/**
* Show the DRAM size in a board-specific way
*
#endif
int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
-#ifdef CONFIG_LWMON
-extern uchar pic_read (uchar reg);
-extern void pic_write (uchar reg, uchar val);
-#endif
/*
* Set this up regardless of board
extern ssize_t spi_write (uchar *, int, uchar *, int);
#endif
-#ifdef CONFIG_HERMES
-/* $(BOARD)/hermes.c */
-void hermes_start_lxt980 (int speed);
-#endif
-
-#ifdef CONFIG_EVB64260
-void evb64260_init(void);
-void debug_led(int, int);
-void display_mem_map(void);
-void perform_soft_reset(void);
-#endif
-
/* $(BOARD)/$(BOARD).c */
int board_early_init_f (void);
int board_late_init (void);
void trap_init (ulong);
#if defined (CONFIG_4xx) || \
defined (CONFIG_MPC5xxx) || \
- defined (CONFIG_74xx_7xx) || \
- defined (CONFIG_74x) || \
- defined (CONFIG_75x) || \
- defined (CONFIG_74xx) || \
defined (CONFIG_MPC85xx) || \
defined (CONFIG_MPC86xx) || \
defined (CONFIG_MPC83xx)
iter++, cpu = cpumask_next(cpu, mask)) \
int cpu_numcores (void);
+int cpu_num_dspcores(void);
u32 cpu_mask (void);
+u32 cpu_dsp_mask(void);
int is_core_valid (unsigned int);
int probecpu (void);
int checkcpu (void);
int serial_stub_getc(struct stdio_dev *sdev);
int serial_stub_tstc(struct stdio_dev *sdev);
-void _serial_setbrg (const int);
-void _serial_putc (const char, const int);
-void _serial_putc_raw(const char, const int);
-void _serial_puts (const char *, const int);
-int _serial_getc (const int);
-int _serial_tstc (const int);
-
/* $(CPU)/speed.c */
int get_clocks (void);
int get_clocks_866 (void);
void invalidate_icache_all(void);
/* arch/$(ARCH)/lib/ticks.S */
-unsigned long long get_ticks(void);
+uint64_t get_ticks(void);
void wait_ticks (unsigned long);
/* arch/$(ARCH)/lib/time.c */
int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
int stoponerr, int offset);
+/**
+ * gzwrite progress indicators: defined weak to allow board-specific
+ * overrides:
+ *
+ * gzwrite_progress_init called on startup
+ * gzwrite_progress called during decompress/write loop
+ * gzwrite_progress_finish called at end of loop to
+ * indicate success (retcode=0) or failure
+ */
+void gzwrite_progress_init(u64 expected_size);
+
+void gzwrite_progress(int iteration,
+ u64 bytes_written,
+ u64 total_bytes);
+
+void gzwrite_progress_finish(int retcode,
+ u64 totalwritten,
+ u64 totalsize,
+ u32 expected_crc,
+ u32 calculated_crc);
+
+/**
+ * decompress and write gzipped image from memory to block device
+ *
+ * @param src compressed image address
+ * @param len compressed image length in bytes
+ * @param dev block device descriptor
+ * @param szwritebuf bytes per write (pad to erase size)
+ * @param startoffs offset in bytes of first write
+ * @param szexpected expected uncompressed length
+ * may be zero to use gzip trailer
+ * for files under 4GiB
+ */
+int gzwrite(unsigned char *src, int len,
+ struct block_dev_desc *dev,
+ unsigned long szwritebuf,
+ u64 startoffs,
+ u64 szexpected);
+
/* lib/qsort.c */
void qsort(void *base, size_t nmemb, size_t size,
int(*compar)(const void *, const void *));
#error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
#endif
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
#define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
-#define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d))
-#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
-#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
-
-/*
- * Divide positive or negative dividend by positive divisor and round
- * to closest integer. Result is undefined for negative divisors and
- * for negative dividends if the divisor variable type is unsigned.
- */
-#define DIV_ROUND_CLOSEST(x, divisor)( \
-{ \
- typeof(x) __x = x; \
- typeof(divisor) __d = divisor; \
- (((typeof(x))-1) > 0 || \
- ((typeof(divisor))-1) > 0 || (__x) > 0) ? \
- (((__x) + ((__d) / 2)) / (__d)) : \
- (((__x) - ((__d) / 2)) / (__d)); \
-} \
-)
-
-#define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1)
-#define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
/*
* ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It
* Usage of this macro shall be avoided or used with extreme care!
*/
#define DEFINE_ALIGN_BUFFER(type, name, size, align) \
- static char __##name[roundup(size * sizeof(type), align)] \
+ static char __##name[ALIGN(size * sizeof(type), align)] \
__aligned(align); \
\
static type *name = (type *)__##name