typedef volatile unsigned char vu_char;
#include <config.h>
+#include <asm-offsets.h>
#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/string.h>
#include <asm/immap_83xx.h>
#endif
#ifdef CONFIG_4xx
-#include <ppc4xx.h>
+#include <asm/ppc4xx.h>
#endif
#ifdef CONFIG_HYMOD
#include <board/hymod/hymod.h>
#define debugX(level,fmt,args...)
#endif /* DEBUG */
+#ifdef DEBUG
+# define _DEBUG 1
+#else
+# define _DEBUG 0
+#endif
+
+/*
+ * An assertion is run-time check done in debug mode only. If DEBUG is not
+ * defined then it is skipped. If DEBUG is defined and the assertion fails,
+ * then it calls panic*( which may or may not reset/halt U-Boot (see
+ * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
+ * before release, and after release it is hoped that they don't matter. But
+ * in any case these failing assertions cannot be fixed with a reset (which
+ * may just do the same assertion again).
+ */
+void __assert_fail(const char *assertion, const char *file, unsigned line,
+ const char *function);
+#define assert(x) \
+ ({ if (!(x) && _DEBUG) \
+ __assert_fail(#x, __FILE__, __LINE__, __func__); })
+
#define error(fmt, args...) do { \
printf("ERROR: " fmt "\nat %s:%d/%s()\n", \
##args, __FILE__, __LINE__, __func__); \
#define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
#endif /* BUG */
+/* Force a compilation error if condition is true */
+#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
+
typedef void (interrupt_handler_t)(void *);
#include <asm/u-boot.h> /* boot information for Linux kernel */
* General Purpose Utilities
*/
#define min(X, Y) \
- ({ typeof (X) __x = (X), __y = (Y); \
+ ({ typeof (X) __x = (X); \
+ typeof (Y) __y = (Y); \
(__x < __y) ? __x : __y; })
#define max(X, Y) \
- ({ typeof (X) __x = (X), __y = (Y); \
+ ({ typeof (X) __x = (X); \
+ typeof (Y) __y = (Y); \
(__x > __y) ? __x : __y; })
#define MIN(x, y) min(x, y)
#define MAX(x, y) max(x, y)
+#if defined(CONFIG_ENV_IS_EMBEDDED)
+#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
+#elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
+ (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
+ defined(CONFIG_ENV_IS_IN_NVRAM)
+#define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
+#else
+#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
+#endif
/**
* container_of - cast a member of a structure out to the containing structure
* Function Prototypes
*/
-#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
-void serial_buffered_init (void);
-void serial_buffered_putc (const char);
-void serial_buffered_puts (const char *);
-int serial_buffered_getc (void);
-int serial_buffered_tstc (void);
-#endif /* CONFIG_SERIAL_SOFTWARE_FIFO */
-
void hang (void) __attribute__ ((noreturn));
+int timer_init(void);
+int cpu_init(void);
+
/* */
phys_size_t initdram (int);
int display_options (void);
/* common/main.c */
void main_loop (void);
int run_command (const char *cmd, int flag);
+#ifdef CONFIG_CMD_PXE
+int run_command2(const char *cmd, int flag);
+#endif
int readline (const char *const prompt);
int readline_into_buffer (const char *const prompt, char * buffer);
int parse_line (char *, char *[]);
void init_cmd_timeout(void);
void reset_cmd_timeout(void);
+#ifdef CONFIG_MENU
+int abortboot(int bootdelay);
+#endif
/* arch/$(ARCH)/lib/board.c */
void board_init_f (ulong) __attribute__ ((noreturn));
/* common/cmd_doc.c */
void doc_probe(unsigned long physadr);
+/* common/cmd_net.c */
+int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
+
/* common/cmd_nvedit.c */
int env_init (void);
void env_relocate (void);
int envmatch (uchar *, int);
-char *getenv (char *);
-int getenv_r (char *name, char *buf, unsigned len);
+char *getenv (const char *);
+int getenv_f (const char *name, char *buf, unsigned len);
+ulong getenv_ulong(const char *name, int base, ulong default_val);
int saveenv (void);
#ifdef CONFIG_PPC /* ARM version to be fixed! */
-int inline setenv (char *, char *);
+int inline setenv (const char *, const char *);
#else
-int setenv (char *, char *);
-#ifdef CONFIG_HAS_UID
-void forceenv (char *, char *);
-#endif
+int setenv (const char *, const char *);
#endif /* CONFIG_PPC */
#ifdef CONFIG_ARM
# include <asm/mach-types.h>
# include <asm/setup.h>
# include <asm/u-boot-arm.h> /* ARM version to be fixed! */
#endif /* CONFIG_ARM */
-#ifdef CONFIG_I386 /* x86 version to be fixed! */
-# include <asm/u-boot-i386.h>
-#endif /* CONFIG_I386 */
+#ifdef CONFIG_X86 /* x86 version to be fixed! */
+# include <asm/u-boot-x86.h>
+#endif /* CONFIG_X86 */
+#ifdef CONFIG_SANDBOX
+# include <asm/u-boot-sandbox.h> /* TODO(sjg) what needs to be fixed? */
+#endif
+#ifdef CONFIG_NDS32
+# include <asm/mach-types.h>
+# include <asm/u-boot-nds32.h>
+#endif /* CONFIG_NDS32 */
#ifdef CONFIG_AUTO_COMPLETE
int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
void api_init (void);
/* common/memsize.c */
-long get_ram_size (volatile long *, long);
+long get_ram_size (long *, long);
/* $(BOARD)/$(BOARD).c */
void reset_phy (void);
int dcache_status (void);
void dcache_enable (void);
void dcache_disable(void);
+void mmu_disable(void);
void relocate_code (ulong, gd_t *, ulong) __attribute__ ((noreturn));
ulong get_endaddr (void);
void trap_init (ulong);
#if defined (CONFIG_MPC83xx)
void ppcDWload(unsigned int *addr, unsigned int *ret);
void ppcDWstore(unsigned int *addr, unsigned int *value);
+void disable_addr_trans(void);
+void enable_addr_trans(void);
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+void ddr_enable_ecc(unsigned int dram_size);
+#endif
#endif
/* $(CPU)/cpu.c */
+static inline int cpumask_next(int cpu, unsigned int mask)
+{
+ for (cpu++; !((1 << cpu) & mask); cpu++)
+ ;
+
+ return cpu;
+}
+
+#define for_each_cpu(iter, cpu, num_cpus, mask) \
+ for (iter = 0, cpu = cpumask_next(-1, mask); \
+ iter < num_cpus; \
+ iter++, cpu = cpumask_next(cpu, mask)) \
+
int cpu_numcores (void);
+u32 cpu_mask (void);
+int is_core_valid (unsigned int);
int probecpu (void);
int checkcpu (void);
int checkicache (void);
/* $(CPU)/serial.c */
int serial_init (void);
-void serial_exit (void);
void serial_setbrg (void);
void serial_putc (const char);
void serial_putc_raw(const char);
ulong get_PERCLK3(void);
#endif
ulong get_bus_freq (ulong);
+int get_serial_clock(void);
+#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx)
+ulong get_ddr_freq(ulong);
+#endif
#if defined(CONFIG_MPC85xx)
typedef MPC85xx_SYS_INFO sys_info_t;
void get_sys_info ( sys_info_t * );
-ulong get_ddr_freq (ulong);
#endif
#if defined(CONFIG_MPC86xx)
typedef MPC86xx_SYS_INFO sys_info_t;
void get_sys_info ( sys_info_t * );
+static inline ulong get_ddr_freq(ulong dummy)
+{
+ return get_bus_freq(dummy);
+}
#endif
#if defined(CONFIG_4xx) || defined(CONFIG_IOP480)
void irq_free_handler (int);
void reset_timer (void);
ulong get_timer (ulong base);
-void set_timer (ulong t);
void enable_interrupts (void);
int disable_interrupts (void);
uint dpram_base_align(uint align);
uint dpram_alloc(uint size);
uint dpram_alloc_align(uint size,uint align);
-void post_word_store (ulong);
-ulong post_word_load (void);
void bootcount_store (ulong);
ulong bootcount_load (void);
#define BOOTCOUNT_MAGIC 0xB001C041
/* $(CPU)/.../lcd.c */
ulong lcd_setmem (ulong);
-/* $(CPU)/.../vfd.c */
-ulong vfd_setmem (ulong);
-
/* $(CPU)/.../video.c */
ulong video_setmem (ulong);
/* arch/$(ARCH)/lib/cache.c */
+void enable_caches(void);
void flush_cache (unsigned long, unsigned long);
+void flush_dcache_all(void);
void flush_dcache_range(unsigned long start, unsigned long stop);
void invalidate_dcache_range(unsigned long start, unsigned long stop);
-
+void invalidate_dcache_all(void);
+void invalidate_icache_all(void);
/* arch/$(ARCH)/lib/ticks.S */
unsigned long long get_ticks(void);
return (string_to_ip(getenv(var)));
}
+/* lib/qsort.c */
+void qsort(void *base, size_t nmemb, size_t size,
+ int(*compar)(const void *, const void *));
+int strcmp_compar(const void *, const void *);
+
/* lib/time.c */
void udelay (unsigned long);
+void mdelay(unsigned long);
+
+/* lib/uuid.c */
+void uuid_str_to_bin(const char *uuid, unsigned char *out);
+int uuid_str_valid(const char *uuid);
/* lib/vsprintf.c */
ulong simple_strtoul(const char *cp,char **endp,unsigned int base);
+int strict_strtoul(const char *cp, unsigned int base, unsigned long *res);
unsigned long long simple_strtoull(const char *cp,char **endp,unsigned int base);
long simple_strtol(const char *cp,char **endp,unsigned int base);
void panic(const char *fmt, ...)
- __attribute__ ((format (__printf__, 1, 2)));
+ __attribute__ ((format (__printf__, 1, 2), noreturn));
int sprintf(char * buf, const char *fmt, ...)
__attribute__ ((format (__printf__, 2, 3)));
int vsprintf(char *buf, const char *fmt, va_list args);
/* lib/strmhz.c */
-char * strmhz(char *buf, long hz);
+char * strmhz(char *buf, unsigned long hz);
/* lib/crc32.c */
#include <u-boot/crc.h>
/* common/console.c */
int console_init_f(void); /* Before relocation; uses the serial stuff */
int console_init_r(void); /* After relocation; uses the console stuff */
-int console_assign (int file, char *devname); /* Assign the console */
+int console_assign(int file, const char *devname); /* Assign the console */
int ctrlc (void);
int had_ctrlc (void); /* have we had a Control-C since last clear? */
void clear_ctrlc (void); /* clear the Control-C condition */
* STDIO based functions (can always be used)
*/
/* serial stuff */
-void serial_printf (const char *fmt, ...)
+int serial_printf (const char *fmt, ...)
__attribute__ ((format (__printf__, 1, 2)));
/* stdin */
int getc(void);
/* stdout */
void putc(const char c);
void puts(const char *s);
-void printf(const char *fmt, ...)
+int printf(const char *fmt, ...)
__attribute__ ((format (__printf__, 1, 2)));
-void vprintf(const char *fmt, va_list args);
+int vprintf(const char *fmt, va_list args);
/* stderr */
#define eputc(c) fputc(stderr, c)
#define stderr 2
#define MAX_FILES 3
-void fprintf(int file, const char *fmt, ...)
+int fprintf(int file, const char *fmt, ...)
__attribute__ ((format (__printf__, 2, 3)));
void fputs(int file, const char *s);
void fputc(int file, const char c);
int cpu_status(int nr);
int cpu_reset(int nr);
int cpu_disable(int nr);
-int cpu_release(int nr, int argc, char *argv[]);
+int cpu_release(int nr, int argc, char * const argv[]);
#endif
#endif /* __ASSEMBLY__ */
+#ifdef CONFIG_PPC
+/*
+ * Has to be included outside of the #ifndef __ASSEMBLY__ section.
+ * Otherwise might lead to compilation errors in assembler files.
+ */
+#include <asm/cache.h>
+#endif
+
/* Put only stuff here that the assembler can digest */
#ifdef CONFIG_POST
#define CONFIG_HAS_POST
+#ifndef CONFIG_POST_ALT_LIST
+#define CONFIG_POST_STD_LIST
+#endif
#endif
#ifdef CONFIG_INIT_CRITICAL
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-#define ROUND(a,b) (((a) + (b)) & ~((b) - 1))
+#define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
#define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d))
#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
#define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1)
#define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
+/*
+ * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It
+ * is used to align DMA buffers.
+ */
+#ifndef __ASSEMBLY__
+#include <asm/cache.h>
+#endif
+
+/* Pull in stuff for the build system */
+#ifdef DO_DEPS_ONLY
+# include <environment.h>
+#endif
+
#endif /* __COMMON_H_ */
projects / karo-tx-uboot.git / blobdiff