]> git.karo-electronics.de Git - karo-tx-uboot.git/blobdiff - include/common.h
clk: arm: snapdragon: add () around macro args and fixup indentation
[karo-tx-uboot.git] / include / common.h
index 75c78d5ac2f77cfa03894d3841dd5726b1f8a08a..a8d833b9891fe09c7121c637a7f1f84a8b764d2b 100644 (file)
@@ -16,6 +16,7 @@ typedef volatile unsigned short vu_short;
 typedef volatile unsigned char vu_char;
 
 #include <config.h>
+#include <errno.h>
 #include <asm-offsets.h>
 #include <linux/bitops.h>
 #include <linux/types.h>
@@ -100,6 +101,13 @@ typedef volatile unsigned char     vu_char;
 #define _DEBUG 0
 #endif
 
+#ifdef CONFIG_SPL_BUILD
+#define _SPL_BUILD     1
+#else
+#define _SPL_BUILD     0
+#endif
+
+/* Define this at the top of a file to add a prefix to debug messages */
 #ifndef pr_fmt
 #define pr_fmt(fmt) fmt
 #endif
@@ -115,9 +123,14 @@ typedef volatile unsigned char     vu_char;
                        printf(pr_fmt(fmt), ##args);    \
        } while (0)
 
+/* Show a message if DEBUG is defined in a file */
 #define debug(fmt, args...)                    \
        debug_cond(_DEBUG, fmt, ##args)
 
+/* Show a message if not in SPL */
+#define warn_non_spl(fmt, args...)                     \
+       debug_cond(!_SPL_BUILD, fmt, ##args)
+
 /*
  * An assertion is run-time check done in debug mode only. If DEBUG is not
  * defined then it is skipped. If DEBUG is defined and the assertion fails,
@@ -146,9 +159,6 @@ void __assert_fail(const char *assertion, const char *file, unsigned line,
 #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
 #endif /* BUG */
 
-/* Force a compilation error if condition is true */
-#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
-
 typedef void (interrupt_handler_t)(void *);
 
 #include <asm/u-boot.h> /* boot information for Linux kernel */
@@ -224,32 +234,26 @@ void board_init_f(ulong);
 void board_init_r(gd_t *, ulong) __attribute__ ((noreturn));
 
 /**
- * board_init_f_mem() - Allocate global data and set stack position
+ * ulong board_init_f_alloc_reserve - allocate reserved area
  *
  * This function is called by each architecture very early in the start-up
- * code to set up the environment for board_init_f(). It allocates space for
- * global_data (see include/asm-generic/global_data.h) and places the stack
- * below this.
+ * code to allow the C runtime to reserve space on the stack for writable
+ * 'globals' such as GD and the malloc arena.
  *
- * This function requires a stack[1] Normally this is at @top. The function
- * starts allocating space from 64 bytes below @top. First it creates space
- * for global_data. Then it calls arch_setup_gd() which sets gd to point to
- * the global_data space and can reserve additional bytes of space if
- * required). Finally it allocates early malloc() memory
- * (CONFIG_SYS_MALLOC_F_LEN). The new top of the stack is just below this,
- * and it returned by this function.
+ * @top:       top of the reserve area, growing down.
+ * @return:    bottom of reserved area
+ */
+ulong board_init_f_alloc_reserve(ulong top);
+
+/**
+ * board_init_f_init_reserve - initialize the reserved area(s)
  *
- * [1] Strictly speaking it would be possible to implement this function
- * in C on many archs such that it does not require a stack. However this
- * does not seem hugely important as only 64 byte are wasted. The 64 bytes
- * are used to handle the calling standard which generally requires pushing
- * addresses or registers onto the stack. We should be able to get away with
- * less if this becomes important.
+ * This function is called once the C runtime has allocated the reserved
+ * area on the stack. It must initialize the GD at the base of that area.
  *
- * @top:       Top of available memory, also normally the top of the stack
- * @return:    New stack location
+ * @base:      top from which reservation was done
  */
-ulong board_init_f_mem(ulong top);
+void board_init_f_init_reserve(ulong base);
 
 /**
  * arch_setup_gd() - Set up the global_data pointer
@@ -605,12 +609,8 @@ void       upmconfig     (unsigned int, unsigned int *, unsigned int);
 ulong  get_tbclk     (void);
 void   reset_misc    (void);
 void   reset_cpu     (ulong addr);
-#if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
 void ft_cpu_setup(void *blob, bd_t *bd);
-#ifdef CONFIG_PCI
 void ft_pci_setup(void *blob, bd_t *bd);
-#endif
-#endif
 
 void smp_set_core_boot_addr(unsigned long addr, int corenr);
 void smp_kick_all_cpus(void);
@@ -669,10 +669,8 @@ int get_serial_clock(void);
 #if defined(CONFIG_MPC85xx)
 typedef MPC85xx_SYS_INFO sys_info_t;
 void   get_sys_info  ( sys_info_t * );
-#  if defined(CONFIG_OF_LIBFDT)
-       void ft_fixup_cpu(void *, u64);
-       void ft_fixup_num_cores(void *);
-#  endif
+void ft_fixup_cpu(void *, u64);
+void ft_fixup_num_cores(void *);
 #endif
 #if defined(CONFIG_MPC86xx)
 typedef MPC86xx_SYS_INFO sys_info_t;
@@ -822,7 +820,7 @@ void gzwrite_progress_finish(int retcode,
  *                             for files under 4GiB
  */
 int gzwrite(unsigned char *src, int len,
-           struct block_dev_desc *dev,
+           struct blk_desc *dev,
            unsigned long szwritebuf,
            u64 startoffs,
            u64 szexpected);
@@ -868,17 +866,20 @@ int       getc(void);
 int    tstc(void);
 
 /* stdout */
-#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SERIAL_SUPPORT)
-#define        putc(...) do { } while (0)
-#define puts(...) do { } while (0)
-#define printf(...) do { } while (0)
-#define vprintf(...) do { } while (0)
-#else
+#if !defined(CONFIG_SPL_BUILD) || \
+       (defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_SERIAL_SUPPORT)) || \
+       (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) && \
+               defined(CONFIG_SPL_SERIAL_SUPPORT))
 void   putc(const char c);
 void   puts(const char *s);
 int    printf(const char *fmt, ...)
                __attribute__ ((format (__printf__, 1, 2)));
 int    vprintf(const char *fmt, va_list args);
+#else
+#define        putc(...) do { } while (0)
+#define puts(...) do { } while (0)
+#define printf(...) do { } while (0)
+#define vprintf(...) do { } while (0)
 #endif
 
 /* stderr */