/*********************************************************************/
-
-/*** CCM and PCU E ***********************************************/
-
-/* The PCU E and CCM use the FEC on a MPC860T for Ethernet */
-
-#if defined (CONFIG_PCU_E) || defined(CONFIG_CCM)
-
-#define FEC_ENET /* use FEC for EThernet */
-#undef SCC_ENET
-
-#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */
-#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */
-#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */
-#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */
-#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */
-#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */
-#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */
-#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */
-#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */
-#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */
-#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */
-#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */
-#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */
-
-#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */
-
-#endif /* CONFIG_PCU_E, CONFIG_CCM */
-
/*** ELPT860 *********************************************************/
#ifdef CONFIG_ELPT860
#endif /* CONFIG_GENIETV */
-/*** GTH ******************************************************/
-
-#ifdef CONFIG_GTH
-#ifdef CONFIG_FEC_ENET
-#define FEC_ENET /* use FEC for EThernet */
-#endif /* CONFIG_FEC_ETHERNET */
-
-/* This ENET stuff is for GTH 10 Mbit ( SCC ) */
-#define PROFF_ENET PROFF_SCC1
-#define CPM_CR_ENET CPM_CR_CH_SCC1
-#define SCC_ENET 0
-
-#define PA_ENET_RXD ((ushort)0x0001) /* PA15 */
-#define PA_ENET_TXD ((ushort)0x0002) /* PA14 */
-#define PA_ENET_TCLK ((ushort)0x0800) /* PA4 */
-#define PA_ENET_RCLK ((ushort)0x0400) /* PA5 */
-
-#define PB_ENET_TENA ((uint)0x00001000) /* PB19 */
-
-#define PC_ENET_CLSN ((ushort)0x0010) /* PC11 */
-#define PC_ENET_RENA ((ushort)0x0020) /* PC10 */
-
-/* NOTE. This is reset for 10Mbit port only */
-#define PC_ENET_RESET ((ushort)0x0100) /* PC 7 */
-
-#define SICR_ENET_MASK ((uint)0x000000ff)
-
-/* TCLK PA4 -->CLK4, RCLK PA5 -->CLK3 */
-#define SICR_ENET_CLKRT ((uint)0x00000037)
-
-#endif /* CONFIG_GTH */
-
/*** HERMES-PRO ******************************************************/
/* The HERMES-PRO uses the FEC on a MPC860T for Ethernet */
#define SICR_ENET_CLKRT ((uint)0x0000003d)
#endif /* CONFIG_MBX */
-/*** MGSUVD *********************************************************/
+/*** KM8XX *********************************************************/
-/* The MGSUVD Service Module uses SCC3 for Ethernet */
+/* The KM8XX Service Module uses SCC3 for Ethernet */
-#ifdef CONFIG_MGSUVD
+#ifdef CONFIG_KM8XX
#define PROFF_ENET PROFF_SCC3 /* Ethernet on SCC3 */
#define CPM_CR_ENET CPM_CR_CH_SCC3
#define SCC_ENET 2
*/
#define SICR_ENET_MASK ((uint)0x00FF0000)
#define SICR_ENET_CLKRT ((uint)0x00250000)
-#endif /* CONFIG_MGSUVD */
+#endif /* CONFIG_KM8XX */
/*** MHPC ********************************************************/