Add GPL-2.0+ SPDX-License-Identifier to source files

[karo-tx-uboot.git] / include / configs / DU440.h

diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index baa54b455977d2430f08a3a594f25e2520778787..9b338535d9fb21a49080ea503241c6d2a3ef3e18 100644 (file)
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -5,20 +5,7 @@
  * based on the Sequoia board configuration by
  * Stefan Roese, Jacqueline Pira-Ferriol and Alain Saurel
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -79,9 +66,8 @@
 #define CONFIG_SYS_INIT_RAM_OCM        1               /* OCM as init ram      */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_OCM_BASE     /* OCM                  */
 
-#define CONFIG_SYS_INIT_RAM_END        (4 << 10)
-#define CONFIG_SYS_GBL_DATA_SIZE       256             /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       (4 << 10)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
@@ -94,7 +80,6 @@
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_SERIAL_MULTI     1
 
 #define CONFIG_SYS_BAUDRATE_TABLE                                              \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
@@ -270,7 +255,6 @@ int du440_phy_addr(int devnum);
 #define CONFIG_HAS_ETH0
 #define CONFIG_SYS_RX_ETH_BUFFER       128
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_HAS_ETH1                1       /* add support for "eth1addr"   */
 #define CONFIG_PHY1_ADDR       du440_phy_addr(1)
 
@@ -360,6 +344,7 @@ int du440_phy_addr(int devnum);
  * PCI stuff
  */
 #define CONFIG_PCI                     /* include pci support          */
+#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_PNP                 /* do (not) pci plug-and-play   */
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup  */
 #define CONFIG_SYS_PCI_TARGBASE       0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/
@@ -421,14 +406,6 @@ int du440_phy_addr(int devnum);
 #define CONFIG_SYS_NAND_BASE_LIST      {CONFIG_SYS_NAND0_ADDR + CONFIG_SYS_NAND0_CS, \
                                 CONFIG_SYS_NAND1_ADDR + CONFIG_SYS_NAND1_CS}
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */