Makefile: move all Power Architecture boards into boards.cfg

[karo-tx-uboot.git] / include / configs / DU440.h

diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index 65dc2359d01b0a01405c647630a8a3ab58473a6b..baa54b455977d2430f08a3a594f25e2520778787 100644 (file)
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -37,6 +37,10 @@
 #define CONFIG_4xx             1               /* ... PPC4xx family    */
 #define CONFIG_SYS_CLK_FREQ    33333400        /* external freq to pll */
 
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xFFFA0000
+#endif
+
 #define CONFIG_BOARD_EARLY_INIT_F 1            /* Call board_early_init_f */
 #define CONFIG_MISC_INIT_R     1               /* Call misc_init_r     */
 #define CONFIG_LAST_STAGE_INIT  1               /* last_stage_init      */
@@ -51,7 +55,7 @@
 #define CONFIG_SYS_BOOT_BASE_ADDR      0xf0000000
 #define CONFIG_SYS_SDRAM_BASE          0x00000000      /* _must_ be 0          */
 #define CONFIG_SYS_FLASH_BASE          0xfc000000      /* start of FLASH       */
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND0_ADDR          0xd0000000      /* NAND Flash           */
 #define CONFIG_SYS_NAND1_ADDR          0xd0100000      /* NAND Flash           */
 #define CONFIG_SYS_OCM_BASE            0xe0010000      /* ocm                  */
@@ -64,9 +68,6 @@
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID PCI_VENDOR_ID_ESDGMBH
 #define CONFIG_SYS_PCI_SUBSYS_ID       0x0444          /* device ID for DU440 */
 
-/* Don't change either of these */
-#define CONFIG_SYS_PERIPHERAL_BASE     0xef600000      /* internal peripherals */
-
 #define CONFIG_SYS_USB2D0_BASE         0xe0000100
 #define CONFIG_SYS_USB_DEVICE          0xe0000000
 #define CONFIG_SYS_USB_HOST            0xe0000400
@@ -86,10 +87,14 @@
 /*
  * Serial Port
  */
+#define CONFIG_CONS_INDEX      1       /* Use UART0                    */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         get_serial_clock()
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK
 #define CONFIG_BAUDRATE                115200
 #define CONFIG_SERIAL_MULTI     1
-#undef CONFIG_UART1_CONSOLE
 
 #define CONFIG_SYS_BAUDRATE_TABLE                                              \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
@@ -169,6 +174,7 @@
  */
 #define CONFIG_HARD_I2C                1       /* I2C with hardware support    */
 #undef CONFIG_SOFT_I2C                 /* I2C bit-banged               */
+#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
 #define CONFIG_SYS_I2C_SPEED           100000  /* I2C speed and slave address  */
 #define CONFIG_SYS_I2C_SLAVE           0x7F
 #define CONFIG_I2C_MULTI_BUS    1