i2c, soft-i2c: switch to new multibus/multiadapter support

[karo-tx-uboot.git] / include / configs / M52277EVB.h

diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
index bb3b474bd8c1f3a27265c36eb043f638b42cae43..b1bdac2d7b6cf7c18a6794b023494279433be57a 100644 (file)
--- a/include/configs/M52277EVB.h
+++ b/include/configs/M52277EVB.h
@@ -41,7 +41,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
 #define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_WATCHDOG
 
@@ -69,6 +68,7 @@
 #define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_MISC
 #undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
 #define CONFIG_CMD_REGINFO
 #undef CONFIG_CMD_USB
 #undef CONFIG_CMD_BMP
@@ -81,11 +81,11 @@
 #ifdef CONFIG_SYS_STMICRO_BOOT
 /* ST Micro serial flash */
 #define CONFIG_EXTRA_ENV_SETTINGS              \
-       "inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0"  \
+       "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
        "loadaddr=0x40010000\0"                 \
        "uboot=u-boot.bin\0"                    \
        "load=loadb ${loadaddr} ${baudrate};"   \
-       "loadb " MK_STR(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"        \
+       "loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"   \
        "upd=run load; run prog\0"              \
        "prog=sf probe 0:2 10000 1;"            \
        "sf erase 0 30000;"                     \
@@ -95,20 +95,20 @@
 #endif
 #ifdef CONFIG_SYS_SPANSION_BOOT
 #define CONFIG_EXTRA_ENV_SETTINGS              \
-       "inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0"  \
+       "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
        "loadaddr=0x40010000\0"                 \
        "uboot=u-boot.bin\0"                    \
        "load=loadb ${loadaddr} ${baudrate}\0"  \
        "upd=run load; run prog\0"              \
-       "prog=prot off " MK_STR(CONFIG_SYS_FLASH_BASE)  \
-       " " MK_STR(CONFIG_SYS_UBOOT_END) ";"            \
-       "era " MK_STR(CONFIG_SYS_FLASH_BASE) " "        \
-       MK_STR(CONFIG_SYS_UBOOT_END) ";"                \
-       "cp.b ${loadaddr} " MK_STR(CONFIG_SYS_FLASH_BASE)       \
+       "prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE)     \
+       " " __stringify(CONFIG_SYS_UBOOT_END) ";"               \
+       "era " __stringify(CONFIG_SYS_FLASH_BASE) " "           \
+       __stringify(CONFIG_SYS_UBOOT_END) ";"                   \
+       "cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE)  \
        " ${filesize}; save\0"                  \
        "updsbf=run loadsbf; run progsbf\0"     \
        "loadsbf=loadb ${loadaddr} ${baudrate};"        \
-       "loadb " MK_STR(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"        \
+       "loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"   \
        "progsbf=sf probe 0:2 10000 1;"         \
        "sf erase 0 30000;"                     \
        "sf write ${loadaddr} 0 30000;"         \
@@ -147,7 +147,6 @@
 /* I2c */
 #define CONFIG_FSL_I2C
 #define CONFIG_HARD_I2C                /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C         /* I2C bit-banged               */
 #define CONFIG_SYS_I2C_SPEED           80000   /* I2C speed and slave address  */
 #define CONFIG_SYS_I2C_SLAVE           0x7F
 #define CONFIG_SYS_I2C_OFFSET          0x58000
@@ -245,7 +244,8 @@
 
 /*
  * Configuration for environment
- * Environment is embedded in u-boot in the second sector of the flash
+ * Environment is not embedded in u-boot. First time runing may have env
+ * crc error warning if there is no correct environment on the flash.
  */
 #ifdef CONFIG_CF_SBF
 #      define CONFIG_ENV_IS_IN_SPI_FLASH
@@ -260,6 +260,7 @@
  */
 #ifdef CONFIG_SYS_STMICRO_BOOT
 #      define CONFIG_SYS_FLASH_BASE    CONFIG_SYS_CS0_BASE
+#      define CONFIG_SYS_FLASH0_BASE   CONFIG_SYS_CS0_BASE
 #      define CONFIG_ENV_OFFSET        0x30000
 #      define CONFIG_ENV_SIZE          0x1000
 #      define CONFIG_ENV_SECT_SIZE     0x10000
@@ -267,7 +268,7 @@
 #ifdef CONFIG_SYS_SPANSION_BOOT
 #      define CONFIG_SYS_FLASH_BASE    CONFIG_SYS_CS0_BASE
 #      define CONFIG_SYS_FLASH0_BASE   CONFIG_SYS_CS0_BASE
-#      define CONFIG_ENV_ADDR          (CONFIG_SYS_FLASH_BASE + 0x8000)
+#      define CONFIG_ENV_ADDR          (CONFIG_SYS_FLASH_BASE + 0x40000)
 #      define CONFIG_ENV_SIZE          0x1000
 #      define CONFIG_ENV_SECT_SIZE     0x8000
 #endif