Coding Style cleanup: replace leading SPACEs by TABs

[karo-tx-uboot.git] / include / configs / P3G4.h

diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h
index 971338a466aca72b78feb8e13cc0d0186bc0e666..354e9d211bd40afc13e3e35bcfba67b37d25869d 100644 (file)
--- a/include/configs/P3G4.h
+++ b/include/configs/P3G4.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2001
  * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -42,6 +26,8 @@
 #define CONFIG_P3G4            1       /* this is a P3G4  board        */
 #define CONFIG_SYS_GT_6426x        GT_64260 /* with a 64260 system controller */
 
+#define        CONFIG_SYS_TEXT_BASE    0xfff00000
+
 #define CONFIG_BAUDRATE                115200  /* console baudrate = 115200    */
 
 #undef CONFIG_ECC                      /* enable ECC support */
@@ -54,7 +40,6 @@
 #define CONFIG_SYS_BOARD_NAME          "P3G4"
 
 #undef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 
 /*
  * The following defines let you select what serial you want to use
@@ -66,7 +51,6 @@
 #define        CONFIG_MPSC
 #define CONFIG_MPSC_PORT       0
 
-#define CONFIG_NET_MULTI        /* attempt all available adapters */
 
 /* define this if you want to enable GT MAC filtering */
 #define CONFIG_GT_USE_MAC_HASH_TABLE
@@ -101,7 +85,7 @@
        "flash_self=run ramargs addip addtty;"                          \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-               "bootm\0"                                               \
+               "bootm\0"                                               \
        "rootpath=/opt/eldk/ppc_74xx\0"                                 \
        "bootfile=/tftpboot/p3g4/uImage\0"                              \
        "kernel_addr=ff000000\0"                                        \
@@ -168,8 +152,7 @@
 #define        CONFIG_SYS_LOAD_ADDR            0x00300000      /* default load address */
 
 #define        CONFIG_SYS_HZ                   1000            /* decr freq: 1ms ticks */
-#define CONFIG_SYS_BUS_HZ              133000000       /* 133 MHz              */
-#define CONFIG_SYS_BUS_CLK             CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_BUS_CLK             133000000       /* 133 MHz              */
 
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
 
@@ -184,9 +167,8 @@
  * Definitions for initial stack pointer and data area
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x40000000
-#define        CONFIG_SYS_INIT_RAM_END 0x1000
-#define        CONFIG_SYS_GBL_DATA_SIZE        128  /* size in bytes reserved for init data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define        CONFIG_SYS_INIT_RAM_SIZE        0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_RAM_LOCK
 
 
@@ -199,7 +181,7 @@
 #define CONFIG_SYS_FLASH_BASE          0xff000000
 #define CONFIG_SYS_RESET_ADDRESS       0xfff00100
 #define        CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 #define        CONFIG_SYS_MALLOC_LEN           (256 << 10)     /* Reserve 256 kB for malloc */
 
 /* areas to map different things with the GT in physical space */
@@ -422,14 +404,6 @@
 
 #define L2_ENABLE      (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                  */
-
 #define CONFIG_SYS_BOARD_ASM_INIT      1