powerpc/t1023rdb: add support for T1023RDB RevC

[karo-tx-uboot.git] / include / configs / T102xRDB.h

diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index b67836c2813cfe8cb237358b923447100de12f03..bde71fbca35c47b6754b8ca41caef918dc8c6329 100644 (file)
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -11,12 +11,6 @@
 #ifndef __T1024RDB_H
 #define __T1024RDB_H
 
-#if defined(CONFIG_T1023RDB)
-#ifdef CONFIG_SPL
-#define CONFIG_SYS_NO_FLASH
-#endif
-#endif
-
 /* High Level Configuration Options */
 #define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_DISPLAY_BOARDINFO
@@ -320,7 +314,7 @@ unsigned long get_board_ddr_clk(void);
 #if defined(CONFIG_T1024RDB)
 #define CONFIG_SYS_NOR_CSOR    CSOR_NAND_TRHZ_80
 #elif defined(CONFIG_T1023RDB)
-#define CONFIG_SYS_NOR_CSOR    (CSOR_NOR_ADM_SHIFT(4) | \
+#define CONFIG_SYS_NOR_CSOR    (CSOR_NOR_ADM_SHIFT(0) | \
                                CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN)
 #endif
 #define CONFIG_SYS_NOR_FTIM0   (FTIM0_NOR_TACSE(0x4) | \
@@ -559,9 +553,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_FSL_I2C_OFFSET      0x118000
 #define CONFIG_SYS_FSL_I2C2_OFFSET     0x118100
 
-#define I2C_MUX_PCA_ADDR               0x77
-#define I2C_MUX_PCA_ADDR_PRI           0x77 /* Primary Mux*/
-
+#define I2C_PCA6408_BUS_NUM            1
+#define I2C_PCA6408_ADDR               0x20
 
 /* I2C bus multiplexer */
 #define I2C_MUX_CH_DEFAULT     0x8
@@ -759,8 +752,10 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_DPAA_FMAN
 
+#ifdef CONFIG_T1024RDB
 #define CONFIG_QE
 #define CONFIG_U_QE
+#endif
 /* Default address of microcode for the Linux FMan driver */
 #if defined(CONFIG_SPIFLASH)
 /*