Merge branch 'rmobile' of git://git.denx.de/u-boot-sh

[karo-tx-uboot.git] / include / configs / T1040QDS.h

diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 2215ac86abc2eed58213869ae3a216d28e6881a6..6b396bb695aa0c950e37eb58eed7d4cdf1fc104f 100644 (file)
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -28,6 +28,8 @@
  */
 #define CONFIG_T1040QDS
 #define CONFIG_PHYS_64BIT
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE       CONFIG_SYS_TEXT_BASE
@@ -58,6 +60,7 @@
 #define CONFIG_SYS_FSL_CPC             /* Corenet Platform Cache */
 #define CONFIG_SYS_NUM_CPC             CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_IFC                 /* Enable IFC Support */
+#define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
 #define CONFIG_PCI                     /* Enable PCI/PCIE */
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCIE1                   /* PCIE controler 1 */
@@ -175,8 +178,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_DDR_SPD
 #ifndef CONFIG_SYS_FSL_DDR4
 #define CONFIG_SYS_FSL_DDR3
-#define CONFIG_FSL_DDR_INTERACTIVE
 #endif
+#define CONFIG_FSL_DDR_INTERACTIVE
 
 #define CONFIG_SYS_SPD_BUS_NUM 0
 #define SPD_EEPROM_ADDRESS     0x51
@@ -201,6 +204,12 @@ unsigned long get_board_ddr_clk(void);
                                CSPR_MSEL_NOR | \
                                CSPR_V)
 #define CONFIG_SYS_NOR_AMASK   IFC_AMASK(128*1024*1024)
+
+/*
+ * TDM Definition
+ */
+#define T1040_TDM_QUIRK_CCSR_BASE      0xfe000000
+
 /* NOR Flash Timing Params */
 #define CONFIG_SYS_NOR_CSOR    CSOR_NAND_TRHZ_80
 #define CONFIG_SYS_NOR_FTIM0   (FTIM0_NOR_TACSE(0x4) | \
@@ -410,6 +419,7 @@ unsigned long get_board_ddr_clk(void);
 /* Video */
 #define CONFIG_FSL_DIU_FB
 #ifdef CONFIG_FSL_DIU_FB
+#define CONFIG_FSL_DIU_CH7301
 #define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_CCSRBAR + 0x180000)
 #define CONFIG_VIDEO
 #define CONFIG_CMD_BMP
@@ -439,11 +449,17 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL             /* Use FSL common I2C driver */
 #define CONFIG_SYS_FSL_I2C_SPEED       50000   /* I2C speed in Hz */
+#define CONFIG_SYS_FSL_I2C2_SPEED      50000
+#define CONFIG_SYS_FSL_I2C3_SPEED      50000
+#define CONFIG_SYS_FSL_I2C4_SPEED      50000
 #define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
-#define CONFIG_SYS_FSL_I2C2_SPEED      50000   /* I2C speed in Hz */
 #define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
+#define CONFIG_SYS_FSL_I2C3_SLAVE      0x7F
+#define CONFIG_SYS_FSL_I2C4_SLAVE      0x7F
 #define CONFIG_SYS_FSL_I2C_OFFSET      0x118000
-#define CONFIG_SYS_FSL_I2C2_OFFSET     0x119000
+#define CONFIG_SYS_FSL_I2C2_OFFSET     0x118100
+#define CONFIG_SYS_FSL_I2C3_OFFSET     0x119000
+#define CONFIG_SYS_FSL_I2C4_OFFSET     0x119100
 
 #define I2C_MUX_PCA_ADDR               0x77
 #define I2C_MUX_PCA_ADDR_PRI           0x77 /* Primary Mux*/
@@ -703,6 +719,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_NET
 #endif
 
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
 /*
  * Miscellaneous configurable options
  */
@@ -710,7 +732,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
 #else
@@ -749,8 +770,7 @@ unsigned long get_board_ddr_clk(void);
 #define __USB_PHY_TYPE utmi
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
-       "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
-       "bank_intlv=cs0_cs1;"                                   \
+       "hwconfig=fsl_ddr:bank_intlv=auto;"                     \
        "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
        "netdev=eth0\0"                                         \
        "video-mode=fslfb:1024x768-32@60,monitor=dvi\0"         \
@@ -805,6 +825,7 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_SECURE_BOOT
 #include <asm/fsl_secure_boot.h>
+#define CONFIG_CMD_BLOB
 #endif
 
 #endif /* __CONFIG_H */