Merge branch 'master' of git://git.denx.de/u-boot-i2c

[karo-tx-uboot.git] / include / configs / TQM8260.h

diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h
index 2104e03c22b90b40c991f93e2332edc058d0a262..1b02cbbca7486b4083c990ac3e45afd90941ee56 100644 (file)
--- a/include/configs/TQM8260.h
+++ b/include/configs/TQM8260.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2001-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -89,10 +73,10 @@
 #define CONFIG_BOOTCOMMAND     "run flash_self"
 
 /* enable I2C and select the hardware/software driver */
-#undef  CONFIG_HARD_I2C                        /* I2C with hardware support    */
-#define CONFIG_SOFT_I2C                1       /* I2C bit-banged               */
-#define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address  */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT            /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED      400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0x7F
 
 /*
  * Software (bit-bang) I2C driver configuration
@@ -181,7 +165,7 @@
  *  - RX clk is CLK11
  *  - TX clk is CLK12
  */
-# define CONFIG_SYS_CMXSCR_VALUE       (CMXSCR_RS1CS_CLK11 | CMXSCR_TS1CS_CLK12)
+# define CONFIG_SYS_CMXSCR_VALUE1      (CMXSCR_RS1CS_CLK11 | CMXSCR_TS1CS_CLK12)
 
 #elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
 
@@ -191,8 +175,8 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CONFIG_SYS_CMXFCR_MASK        (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE       (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CMXFCR_MASK2       (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE2      (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
 # define CONFIG_SYS_CPMFCR_RAMTYPE     0
 # define CONFIG_SYS_FCC_PSMR           (FCC_PSMR_FDE|FCC_PSMR_LPB)
 
@@ -248,9 +232,6 @@
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 #define CONFIG_SYS_HUSH_PARSER         1       /* Use the HUSH parser          */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define        CONFIG_SYS_PROMPT_HUSH_PS2      "> "
-#endif
 
 #if defined(CONFIG_CMD_KGDB)
 #define        CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size      */
@@ -268,8 +249,6 @@
 
 #define        CONFIG_SYS_HZ           1000            /* decrementer freq: 1 ms ticks */
 
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 #define        CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC     /* "bad" address                */
 
 /*
@@ -362,9 +341,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END        0x4000  /* End of used area in DPRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE       128 /* size in bytes reserved for initial data*/
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x4000  /* Size of used area in DPRAM    */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------