ti_armv7_common: env: Consolidate MMC args

[karo-tx-uboot.git] / include / configs / am43xx_evm.h

diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 466ded7ddfb41882b95c6e95cd178aa877e31d40..d868442acb5ae9d8ff3aa31a1f26b7a5a51b349b 100644 (file)
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -80,7 +80,7 @@
 #endif
 
 /* Now bring in the rest of the common code. */
-#include <configs/ti_armv7_common.h>
+#include <configs/ti_armv7_omap.h>
 
 /* Always 64 KiB env size */
 #define CONFIG_ENV_SIZE                        (64 << 10)
@@ -110,6 +110,7 @@
 #define CONFIG_CMD_USB
 #define CONFIG_USB_HOST
 #define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_DWC3
 #define CONFIG_USB_XHCI_OMAP
 #define CONFIG_USB_STORAGE
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
@@ -127,7 +128,7 @@
 #define CONFIG_USB_DWC3_GADGET
 
 #define CONFIG_USB_GADGET
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_VBUS_DRAW 2
 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
 #define CONFIG_G_DNL_VENDOR_NUM 0x0403
@@ -137,7 +138,7 @@
 
 #ifndef CONFIG_SPL_BUILD
 /* USB Device Firmware Update support */
-#define CONFIG_DFU_FUNCTION
+#define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_RAM
 #define CONFIG_CMD_DFU
 
@@ -204,7 +205,6 @@
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SPI
 #define CONFIG_TI_SPI_MMAP
-#define CONFIG_SPI_FLASH_BAR
 #define CONFIG_QSPI_SEL_GPIO                   48
 #define CONFIG_SF_DEFAULT_SPEED                48000000
 #define CONFIG_DEFAULT_SPI_MODE                SPI_MODE_3
@@ -216,6 +216,7 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
        DEFAULT_LINUX_BOOT_ENV \
+       DEFAULT_MMC_TI_ARGS \
        "fdtfile=undefined\0" \
        "bootpart=0:2\0" \
        "bootdir=/boot\0" \
@@ -225,18 +226,11 @@
                "uuid_disk=${uuid_gpt_disk};" \
                "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
        "optargs=\0" \
-       "mmcdev=0\0" \
-       "mmcroot=/dev/mmcblk0p2 rw\0" \
-       "mmcrootfstype=ext4 rootwait\0" \
        "usbroot=/dev/sda2 rw\0" \
        "usbrootfstype=ext4 rootwait\0" \
        "usbdev=0\0" \
        "ramroot=/dev/ram0 rw\0" \
        "ramrootfstype=ext2\0" \
-       "mmcargs=setenv bootargs console=${console} " \
-               "${optargs} " \
-               "root=${mmcroot} " \
-               "rootfstype=${mmcrootfstype}\0" \
        "usbargs=setenv bootargs console=${console} " \
                "${optargs} " \
                "root=${usbroot} " \
@@ -268,7 +262,7 @@
                        "if run loadimage; then " \
                                "run loadfdt; " \
                                "echo Booting from mmc${mmcdev} ...; " \
-                               "run mmcargs; " \
+                               "run args_mmc; " \
                                "bootz ${loadaddr} - ${fdtaddr}; " \
                        "fi;" \
                "fi;\0" \
@@ -292,6 +286,8 @@
                                "bootz ${loadaddr} - ${fdtaddr}; " \
                        "fi;" \
                "fi\0" \
+               "fi;" \
+               "usb stop ${usbdev};\0" \
        "findfdt="\
                "if test $board_name = AM43EPOS; then " \
                        "setenv fdtfile am43x-epos-evm.dtb; fi; " \