board/BuR/common: fix compiler warning

[karo-tx-uboot.git] / include / configs / bur_am335x_common.h

diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index 1f57bd2744f7664530c60387ab7c187b8bb79f98..377e6cfd67a5908a40c6bbf0391e107d727c28bd 100644 (file)
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -12,6 +12,33 @@
 #ifndef __BUR_AM335X_COMMON_H__
 #define __BUR_AM335X_COMMON_H__
 /* ------------------------------------------------------------------------- */
+#define BUR_COMMON_ENV \
+"defaultip=192.168.60.253\0" \
+"defaultsip=192.168.60.254\0" \
+"netconsole=echo switching to network console ...; " \
+"if dhcp; then " \
+"setenv ncip ${serverip}; else " \
+"setenv ncip 192.168.60.254; " \
+"setenv serverip 192.168.60.254; " \
+"setenv gatewayip 192.168.60.254; " \
+"setenv ipaddr 192.168.60.1; " \
+"fi;" \
+"setenv netdisplay0 '" \
+"setcurs 1 9; puts myip; setcurs 10 9; puts ${ipaddr};" \
+"setcurs 1 10;puts serverip; setcurs 10 10; puts ${serverip};" \
+"run netdisplay0; " \
+"setenv stdout nc;setenv stdin nc;setenv stderr nc\0"
+
+#define CONFIG_CMD_TIME
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (1366*767*4)
+#define CONFIG_CMD_UNZIP
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_24BMP
+#define CONFIG_BMP_32BPP
+
+#define CONFIG_SYS_GENERIC_BOARD
+
 #define CONFIG_AM33XX
 #define CONFIG_OMAP
 #define CONFIG_OMAP_COMMON
@@ -22,7 +49,7 @@
 /* Timer information */
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_TIMERBASE           0x48040000      /* Use Timer2 */
-
+#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC    /* enable 32kHz OSC at bootime */
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_POWER_TPS65217
 
@@ -45,18 +72,19 @@
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_NET_RETRY_COUNT         4
+#define CONFIG_NET_RETRY_COUNT         2
 #define CONFIG_CMD_PING
 #define CONFIG_DRIVER_TI_CPSW          /* Driver for IP block */
 #define CONFIG_MII                     /* Required in net/eth.c */
 #define CONFIG_SPL_ETH_SUPPORT
 #define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR                        1
 #define CONFIG_PHY_NATSEMI
 #define CONFIG_SPL_NET_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT         /* used for a fetching MAC-Address */
 #define CONFIG_SPL_NET_VCI_STRING      "AM335x U-Boot SPL"
-
+/* Network console */
+#define CONFIG_NETCONSOLE                      1
+#define CONFIG_BOOTP_MAY_FAIL          /* if we don't have DHCP environment */
 /*
  * SPL related defines.  The Public RAM memory map the ROM defines the
  * area between 0x402F0400 and 0x4030B800 as a download area and
@@ -95,7 +123,7 @@
 #define CONFIG_SYS_OMAP24_I2C_SPEED    100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE    1
 #define CONFIG_SYS_I2C_OMAP24XX
-
+#define CONFIG_CMD_I2C
 /* GPIO */
 #define CONFIG_OMAP_GPIO
 #define CONFIG_CMD_GPIO
@@ -109,7 +137,7 @@
  * we are on so we do not need to rely on the command prompt.  We set a
  * console baudrate of 115200 and use the default baud rate table.
  */
-#define CONFIG_SYS_MALLOC_LEN          (1024 << 10)
+#define CONFIG_SYS_MALLOC_LEN          (5120 << 10)
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT              "U-Boot (BuR V2.0)# "
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
@@ -150,7 +178,6 @@
 #undef CONFIG_CMD_NFS
 #undef CONFIG_CMD_SETGETDCR
 #undef CONFIG_CMD_XIMG
-#undef CONFIG_CMD_CRC32
 /* define command we need always */
 #define CONFIG_CMD_ECHO
 #define CONFIG_CMD_SOURCE
@@ -163,7 +190,6 @@
  * under common/spl/.  Given our generally common memory map, we set a
  * number of related defaults and sizes here.
  */
-#define CONFIG_SPL
 #define CONFIG_SPL_FRAMEWORK
 /*
  * Place the image at the start of the ROM defined image space.
@@ -176,7 +202,6 @@
  *
  * ----------------------------------------------------------------------------
  */
-#define CONFIG_SPL_STACK               CONFIG_SYS_INIT_SP_ADDR
 #undef  CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE           0x80800000
 #define CONFIG_SPL_BSS_START_ADDR      0x80A00000