#define CONFIG_AM33XX
#define CONFIG_OMAP
+#define CONFIG_OMAP_COMMON
#include <asm/arch/omap.h>
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
-/* DMA defines */
-#define CONFIG_DMA_COHERENT
-#define CONFIG_DMA_COHERENT_SIZE (1 << 20)
-
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
#define CONFIG_SYS_MALLOC_LEN (1024 << 10)
#define CONFIG_SYS_LONGHELP /* undef to save memory */
/* Display cpuinfo */
#define CONFIG_DISPLAY_CPUINFO
+/* Flattened Device Tree */
+#define CONFIG_OF_LIBFDT
+
/* Commands to include */
#include <config_cmd_default.h>
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
-/*
- * Because the issues explained in doc/README.memory-test, the "mtest command
- * is considered deprecated. It should not be enabled in most normal ports of
- * U-Boot.
- */
-#undef CONFIG_CMD_MEMTEST
+/* Make the verbose messages from UBI stop printing */
+#define CONFIG_UBI_SILENCE_MSG
+#define CONFIG_UBIFS_SILENCE_MSG
#define CONFIG_BOOTDELAY 1 /* negative for no autoboot */
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x80200000\0" \
- "rdaddr=0x81000000\0" \
- "bootfile=/boot/uImage\0" \
+ "loadaddr=0x80F80000\0" \
+ "dtbaddr=0x80200000\0" \
+ "bootdir=/boot\0" \
+ "bootfile=zImage\0" \
+ "dtbfile=am335x-base0033.dtb\0" \
"console=ttyO0,115200n8\0" \
- "optargs=\0" \
+ "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
"mmcdev=0\0" \
"mmcroot=/dev/mmcblk0p2 rw\0" \
+ "ubiroot=ubi0:filesystem rw ubi.mtd=3,2048\0" \
"mmcrootfstype=ext4 rootwait\0" \
- "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
- "ramrootfstype=ext2\0" \
+ "ubirootfstype=ubifs rootwait\0" \
"mmcargs=setenv bootargs console=${console} " \
- "${optargs} " \
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
+ "ubiargs=setenv bootargs console=${console} " \
+ "root=${ubiroot} " \
+ "rootfstype=${ubirootfstype}\0" \
"bootenv=uEnv.txt\0" \
"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
"importbootenv=echo Importing environment from mmc ...; " \
- "env import -t $loadaddr $filesize\0" \
- "ramargs=setenv bootargs console=${console} " \
- "${optargs} " \
- "root=${ramroot} " \
- "rootfstype=${ramrootfstype}\0" \
- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
- "loaduimagefat=load mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
- "loaduimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \
+ "env import -t ${loadaddr} ${filesize}\0" \
+ "mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \
+ "load mmc ${mmcdev}:2 ${dtbaddr} ${bootdir}/${dtbfile}\0" \
+ "ubiload=ubi part filesystem 2048; ubifsmount ubi0; " \
+ "ubifsload ${loadaddr} ${bootdir}/${bootfile}; " \
+ "ubifsload ${dtbaddr} ${bootdir}/${dtbfile} \0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
- "bootm ${loadaddr}\0" \
- "ramboot=echo Booting from ramdisk ...; " \
- "run ramargs; " \
- "bootm ${loadaddr}\0" \
+ "bootz ${loadaddr} - ${dtbaddr}\0" \
+ "ubiboot=echo Booting from nand (ubifs) ...; " \
+ "run ubiargs; run ubiload; " \
+ "bootz ${loadaddr} - ${dtbaddr}\0" \
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev}; if mmc rescan; then " \
"echo Running uenvcmd ...;" \
"run uenvcmd;" \
"fi;" \
- "if run loaduimage; then " \
+ "if run mmcload; then " \
"run mmcboot;" \
"fi;" \
+ "else " \
+ "run ubiboot;" \
"fi;" \
/* Max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
-#define CONFIG_SYS_HZ 1000 /* 1ms clock */
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
-#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
-#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
GENERATED_GBL_DATA_SIZE)
/* Platform/Board specific defs */
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_HZ 1000 /* 1ms clock */
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_CLK (48000000)
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */
-#define CONFIG_SERIAL_MULTI
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
/* Ethernet support */
#define CONFIG_DRIVER_TI_CPSW
#define CONFIG_MII
-#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_ONFI_DETECTION 1
#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
+#define CONFIG_ENV_OFFSET 0x180000 /* environment starts here */
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_OFFSET + CONFIG_SYS_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#define CONFIG_RBTREE
#define CONFIG_LZO
-#define MTDIDS_DEFAULT "nand0=nand"
-#define MTDPARTS_DEFAULT "mtdparts=nand:512k(SPL),"\
- "1m(U-Boot),128k(U-Boot Env),"\
- "5m(Kernel),-(File System)"
+#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
+#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(spl),"\
+ "1m(uboot),256k(environment),"\
+ "-(filesystem)"
/* Unsupported features */
#undef CONFIG_USE_IRQ
#define CONFIG_SPL
#define CONFIG_SPL_FRAMEWORK
/*
- * Place the image at the start of the ROM defined image space and leave
- * space for SRAM scratch entries (see arch/arm/include/omap_common.h).
+ * Place the image at the start of the ROM defined image space.
* We limit our size to the ROM-defined downloaded image area, and use the
* rest of the space for stack.
*/
-#define CONFIG_SPL_TEXT_BASE 0x402F0500
+#define CONFIG_SPL_TEXT_BASE 0x402F0400
#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-#define CONFIG_SYS_NAND_ECCSTEPS 4
-#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
- CONFIG_SYS_NAND_ECCSTEPS)
-
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
projects / karo-tx-uboot.git / blobdiff