rename CFG_ENV macros to CONFIG_ENV

[karo-tx-uboot.git] / include / configs / lpc2292sodimm.h

diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h
index 7e515230a3342095dde6b2e718d151840e438f35..3d173d71fe2346364449c6c8563999b7c732cbd2 100644 (file)
--- a/include/configs/lpc2292sodimm.h
+++ b/include/configs/lpc2292sodimm.h
@@ -1,12 +1,8 @@
 /*
- * (C) Copyright 2000
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Configuation settings for the EP7312 board.
- *
- * Modified to work on Armadillo HT1070 ARM720T board
- * (C) Copyright 2005 Rowel Atienza rowel@diwalabs.com
+ * Configuation settings for the LPC2292SODIMM board from Embedded Artists.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -31,7 +27,7 @@
 #define __CONFIG_H
 
 /*
- * If we are developing, we might want to start armboot from ram
+ * If we are developing, we might want to start u-boot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
 #undef CONFIG_INIT_CRITICAL            /* undef for developing */
@@ -46,14 +42,14 @@
 #define CONFIG_ARM7            1       /* This is a ARM7 CPU   */
 #define CONFIG_ARM_THUMB       1       /* this is an ARM720TDMI */
 #define CONFIG_LPC2292
-#undef  CONFIG_ARM7_REVD               /* disable ARM720 REV.D Workarounds */
+#undef CONFIG_ARM7_REVD                /* disable ARM720 REV.D Workarounds */
 
 #undef CONFIG_USE_IRQ                  /* don't need them anymore */
 
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN         (CFG_ENV_SIZE + 128*1024)
+#define CFG_MALLOC_LEN         (CONFIG_ENV_SIZE + 128*1024)
 #define CFG_GBL_DATA_SIZE      128     /* size in bytes reserved for initial data */
 
 /*
@@ -70,24 +66,31 @@
 
 #define CONFIG_BAUDRATE                115200
 
-#define CONFIG_BOOTP_MASK       (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
 
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_FAT     | \
-                               CFG_CMD_MMC     | \
-                               CFG_CMD_NET     | \
-                               CFG_CMD_PING)
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 #define CONFIG_BOOTDELAY       5
 
 /*
@@ -103,11 +106,12 @@
 #define CFG_MEMTEST_START      0x40000000      /* memtest works on     */
 #define CFG_MEMTEST_END                0x40000000      /* 4 ... 8 MB in DRAM   */
 
-#undef  CFG_CLKS_IN_HZ         /* everything, incl board info, in Hz */
+#undef CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
 
-#define        CFG_LOAD_ADDR           0x00040000      /* default load address for armadillo: kernel img is here*/
+#define        CFG_LOAD_ADDR           0x00040000      /* default load address for     */
+                                               /* armadillo: kernel img is here*/
 
-#define CFG_SYS_CLK_FREQ        58982400        /* Hz */
+#define CFG_SYS_CLK_FREQ       58982400        /* Hz */
 #define        CFG_HZ                  2048            /* decrementer freq in Hz */
 
                                                /* valid baudrates */
@@ -146,13 +150,15 @@
 #define CFG_FLASH_ERASE_TOUT   (2*CFG_HZ) /* Timeout for Flash Erase */
 #define CFG_FLASH_WRITE_TOUT   (2*CFG_HZ) /* Timeout for Flash Write */
 
-#define        CFG_ENV_IS_IN_FLASH     1
-#define CFG_ENV_ADDR           (0x0 + 0x3C000) /* Addr of Environment Sector   */
-#define CFG_ENV_SIZE           0x2000 /* Total Size of Environment Sector      */
+#define        CONFIG_ENV_IS_IN_FLASH  1
+#define CONFIG_ENV_ADDR                (0x0 + 0x3C000) /* Addr of Environment Sector   */
+#define CONFIG_ENV_SIZE                0x2000 /* Total Size of Environment Sector      */
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_MMC 1
+/* we use this ethernet chip */
+#define CONFIG_ENC28J60
 
 #endif /* __CONFIG_H */