arm/km: convert mgcoge3un target to km_kirkwood

[karo-tx-uboot.git] / include / configs / mgcoge3un.h

diff --git a/include/configs/mgcoge3un.h b/include/configs/mgcoge3un.h
deleted file mode 100644 (file)
index 156821c..0000000
--- a/include/configs/mgcoge3un.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Prafulla Wadaskar <prafulla@marvell.com>
- *
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2010-2011
- * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-/* for linking errors see
- * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */
-
-#ifndef _CONFIG_MGCOGE3UN_H
-#define _CONFIG_MGCOGE3UN_H
-
-/* include common defines/options for all arm based Keymile boards */
-#include "km/km_arm.h"
-
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING    "\nKeymile MGCOGE3UN"
-#define CONFIG_HOSTNAME                mgcoge3un
-#define CONFIG_MGCOGE3UN
-
-#define KM_IVM_BUS     "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
-#define KM_ENV_BUS     "pca9547:70:d" /* I2C2 (Mux-Port 5)*/
-
-/* we use a new RAM type on mgcoge3un board */
-#undef CONFIG_SYS_KWD_CONFIG
-#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
-
-/*
- * mgcoge3un has a fixed link to the marvell switch
- * with 100MB full duplex and autoneg off, for this
- * reason we have to change the default settings
- */
-#define PORT_SERIAL_CONTROL_VALUE              ( \
-       MVGBE_FORCE_LINK_PASS                   | \
-       MVGBE_DIS_AUTO_NEG_FOR_DUPLX            | \
-       MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL        | \
-       MVGBE_ADV_NO_FLOW_CTRL                  | \
-       MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX     | \
-       MVGBE_FORCE_BP_MODE_NO_JAM              | \
-       (1 << 9) /* Reserved bit has to be 1 */ | \
-       MVGBE_DO_NOT_FORCE_LINK_FAIL            | \
-       MVGBE_DIS_AUTO_NEG_SPEED_GMII           | \
-       MVGBE_DTE_ADV_0                         | \
-       MVGBE_MIIPHY_MAC_MODE                   | \
-       MVGBE_AUTO_NEG_NO_CHANGE                | \
-       MVGBE_MAX_RX_PACKET_1552BYTE            | \
-       MVGBE_CLR_EXT_LOOPBACK                  | \
-       MVGBE_SET_FULL_DUPLEX_MODE              | \
-       MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX        |\
-       MVGBE_SET_GMII_SPEED_TO_10_100  |\
-       MVGBE_SET_MII_SPEED_TO_100)
-
-#define CONFIG_KM_BOARD_EXTRA_ENV      "waitforne=true\0"
-#define CONFIG_PIGGY_MAC_ADRESS_OFFSET  3
-
-/*
- * PCIe port not used on mgcoge3un
- */
-#undef  CONFIG_KIRKWOOD_PCIE_INIT
-
-#endif /* _CONFIG_MGCOGE3UN_H */