rename CFG_ENV macros to CONFIG_ENV

[karo-tx-uboot.git] / include / configs / ml401.h

diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index b32043850e617bb5bab5ea44ed0f996da3652059..2a6c68c656b9bc8c3177b588bdce8552d14703cc 100644 (file)
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007 Michal Simek
+ * (C) Copyright 2007-2008 Michal Simek
  *
  * Michal SIMEK <monstr@monstr.eu>
  *
@@ -32,38 +32,71 @@
 #define        CONFIG_ML401            1       /* ML401 Board */
 
 /* uart */
+#ifdef XILINX_UARTLITE_BASEADDR
 #define        CONFIG_XILINX_UARTLITE
-#define        CONFIG_SERIAL_BASE      XILINX_UART_BASEADDR
-#define        CONFIG_BAUDRATE         XILINX_UART_BAUDRATE
+#define        CONFIG_SERIAL_BASE      XILINX_UARTLITE_BASEADDR
+#define        CONFIG_BAUDRATE         XILINX_UARTLITE_BAUDRATE
 #define        CFG_BAUDRATE_TABLE      { CONFIG_BAUDRATE }
+#else
+#ifdef XILINX_UART16550_BASEADDR
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE   4
+#define CONFIG_CONS_INDEX      1
+#define CFG_NS16550_COM1       XILINX_UART16550_BASEADDR
+#define CFG_NS16550_CLK                XILINX_UART16550_CLOCK_HZ
+#define        CONFIG_BAUDRATE         115200
+#define        CFG_BAUDRATE_TABLE      { 9600, 115200 }
+#endif
+#endif
 
 /* setting reset address */
 /*#define      CFG_RESET_ADDRESS       TEXT_BASE*/
 
 /* ethernet */
-#define CONFIG_EMACLITE                1
-#define XPAR_EMAC_0_DEVICE_ID  XPAR_OPB_ETHERNET_0_DEVICE_ID
+#ifdef XILINX_EMAC_BASEADDR
+#define CONFIG_XILINX_EMAC     1
+#define CFG_ENET
+#else
+#ifdef XILINX_EMACLITE_BASEADDR
+#define CONFIG_XILINX_EMACLITE 1
+#define CFG_ENET
+#endif
+#endif
+#undef ET_DEBUG
 
 /* gpio */
+#ifdef XILINX_GPIO_BASEADDR
 #define        CFG_GPIO_0              1
 #define        CFG_GPIO_0_ADDR         XILINX_GPIO_BASEADDR
+#endif
 
 /* interrupt controller */
+#ifdef XILINX_INTC_BASEADDR
 #define        CFG_INTC_0              1
 #define        CFG_INTC_0_ADDR         XILINX_INTC_BASEADDR
 #define        CFG_INTC_0_NUM          XILINX_INTC_NUM_INTR_INPUTS
+#endif
 
 /* timer */
+#ifdef XILINX_TIMER_BASEADDR
+#if (XILINX_TIMER_IRQ != -1)
 #define        CFG_TIMER_0             1
 #define        CFG_TIMER_0_ADDR        XILINX_TIMER_BASEADDR
 #define        CFG_TIMER_0_IRQ         XILINX_TIMER_IRQ
 #define        FREQUENCE               XILINX_CLOCK_FREQ
 #define        CFG_TIMER_0_PRELOAD     ( FREQUENCE/1000 )
+#endif
+#else
+#ifdef XILINX_CLOCK_FREQ
 #define        CONFIG_XILINX_CLOCK_FREQ        XILINX_CLOCK_FREQ
-
+#else
+#error BAD CLOCK FREQ
+#endif
+#endif
 /* FSL */
-#define        CFG_FSL_2
-#define        FSL_INTR_2      1
+/* #define     CFG_FSL_2 */
+/* #define     FSL_INTR_2      1 */
 
 /*
  * memory layout - Example
@@ -121,29 +154,29 @@
        #define CFG_FLASH_BASE          XILINX_FLASH_START
        #define CFG_FLASH_SIZE          XILINX_FLASH_SIZE
        #define CFG_FLASH_CFI           1
-       #define CFG_FLASH_CFI_DRIVER    1
+       #define CONFIG_FLASH_CFI_DRIVER 1
        #define CFG_FLASH_EMPTY_INFO    1       /* ?empty sector */
        #define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks */
        #define CFG_MAX_FLASH_SECT      128     /* max number of sectors on one chip */
        #define CFG_FLASH_PROTECTION            /* hardware flash protection */
 
        #ifdef  RAMENV
-               #define CFG_ENV_IS_NOWHERE      1
-               #define CFG_ENV_SIZE            0x1000
-               #define CFG_ENV_ADDR            (CFG_MONITOR_BASE - CFG_ENV_SIZE)
+               #define CONFIG_ENV_IS_NOWHERE   1
+               #define CONFIG_ENV_SIZE         0x1000
+               #define CONFIG_ENV_ADDR         (CFG_MONITOR_BASE - CONFIG_ENV_SIZE)
 
        #else   /* !RAMENV */
-               #define CFG_ENV_IS_IN_FLASH     1
-               #define CFG_ENV_ADDR            0x40000
-               #define CFG_ENV_SECT_SIZE       0x40000 /* 256K(one sector) for env */
-               #define CFG_ENV_SIZE            0x2000
+               #define CONFIG_ENV_IS_IN_FLASH  1
+               #define CONFIG_ENV_SECT_SIZE    0x40000 /* 256K(one sector) for env */
+               #define CONFIG_ENV_ADDR         (CFG_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
+               #define CONFIG_ENV_SIZE         0x40000
        #endif /* !RAMBOOT */
 #else /* !FLASH */
        /* ENV in RAM */
        #define CFG_NO_FLASH            1
-       #define CFG_ENV_IS_NOWHERE      1
-       #define CFG_ENV_SIZE            0x1000
-       #define CFG_ENV_ADDR            (CFG_MONITOR_BASE - CFG_ENV_SIZE)
+       #define CONFIG_ENV_IS_NOWHERE   1
+       #define CONFIG_ENV_SIZE         0x1000
+       #define CONFIG_ENV_ADDR         (CFG_MONITOR_BASE - CONFIG_ENV_SIZE)
        #define CFG_FLASH_PROTECTION            /* hardware flash protection */
 #endif /* !FLASH */
 
@@ -174,7 +207,12 @@
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MFSL
-#define CONFIG_CMD_PING
+
+#ifndef CFG_ENET
+       #undef CONFIG_CMD_NET
+#else
+       #define CONFIG_CMD_PING
+#endif
 
 #if defined(CONFIG_SYSTEMACE)
        #define CONFIG_CMD_EXT2
@@ -235,4 +273,7 @@
                                        "256k(u-boot),256k(env),3m(kernel),"\
                                        "1m(romfs),1m(cramfs),-(jffs2)\0"
 
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_OF_LIBFDT       1
+
 #endif /* __CONFIG_H */