#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
-#define CFG_ATMEL_PLL_INIT_BUG 1
+#define CONFIG_SYS_ATMEL_PLL_INIT_BUG 1
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CFG_USE_MAIN_OSCILLATOR 1
+#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
/* flash */
#define MC_PUIA_VAL 0x00000000
#define MC_PUP_VAL 0x00000000
#define MC_ASR_VAL 0x00000000
#define MC_AASR_VAL 0x00000000
#define EBI_CFGR_VAL 0x00000000
-#define SMC2_CSR_VAL 0x00003084 /* 16bit, 2 TDF, 4 WS */
+#define SMC_CSR0_VAL 0x00003084 /* 16bit, 2 TDF, 4 WS */
/* clocks */
#define PLLAR_VAL 0x20263E04 /* 180 MHz for PCK */
#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
+#else
+#define CONFIG_SKIP_RELOCATE_UBOOT
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
/*
* Size of malloc() pool
*/
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CONFIG_BAUDRATE 115200
-#define CFG_AT91C_BRGR_DIVISOR 33 /* hardcode so no __divsi3 : AT91C_MASTER_CLOCK /(baudrate * 16) */
+#define CONFIG_SYS_AT91C_BRGR_DIVISOR 33 /* hardcode so no __divsi3 : AT91C_MASTER_CLOCK /(baudrate * 16) */
/*
* Hardware drivers
#define CONFIG_DOS_PARTITION 1
#define CONFIG_AT91C_PQFP_UHPBUG 1
-#undef CFG_USB_OHCI_BOARD_INIT
-#define CFG_USB_OHCI_CPU_INIT 1
-#define CFG_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE
-#define CFG_USB_OHCI_SLOT_NAME "at91rm9200"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
+#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
#undef CONFIG_HARD_I2C
#ifdef CONFIG_HARD_I2C
-#define CFG_I2C_SPEED 0 /* not used */
-#define CFG_I2C_SLAVE 0 /* not used */
+#define CONFIG_SYS_I2C_SPEED 0 /* not used */
+#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */
-#define CFG_I2C_RTC_ADDR 0x32
-#define CFG_I2C_EEPROM_ADDR 0x50
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW
+#define CONFIG_SYS_I2C_RTC_ADDR 0x32
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
#endif
/* still about 20 kB free with this defined */
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
#define CONFIG_BOOTDELAY 3
-#ifdef CONFIG_HARD_I2C
-#define CONFIG_COMMANDS \
- ((CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP | \
- CFG_CMD_MISC))
-#else
-#define CONFIG_COMMANDS \
- ((CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP | \
- CFG_CMD_USB | \
- CFG_CMD_CACHE) & \
- ~(CFG_CMD_BDI | \
- CFG_CMD_IMI | \
- CFG_CMD_AUTOSCRIPT | \
- CFG_CMD_FPGA | \
- CFG_CMD_MISC | \
- CFG_CMD_LOADS ))
+#if !defined(CONFIG_HARD_I2C)
#define CONFIG_TIMESTAMP
#endif
-#define CFG_LONGHELP
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+#if defined(CONFIG_HARD_I2C)
+
+ #define CONFIG_CMD_DATE
+ #define CONFIG_CMD_EEPROM
+ #define CONFIG_CMD_I2C
+ #define CONFIG_CMD_MISC
+
+#else
+
+ #define CONFIG_CMD_USB
+ #define CONFIG_CMD_CACHE
+
+ #undef CONFIG_CMD_AUTOSCRIPT
+ #undef CONFIG_CMD_BDI
+ #undef CONFIG_CMD_FPGA
+ #undef CONFIG_CMD_IMI
+ #undef CONFIG_CMD_LOADS
+ #undef CONFIG_CMD_MISC
+
+#endif
+
+
+#define CONFIG_SYS_LONGHELP
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM 0x20000000
#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
-#define CFG_MEMTEST_START PHYS_SDRAM
-#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
#define CONFIG_DRIVER_ETHER
#define CONFIG_NET_RETRY_COUNT 20
#define PHYS_FLASH_1 0x10000000
#define PHYS_FLASH_SIZE 0x1000000 /* 16 megs main flash */
-#define CFG_FLASH_BASE PHYS_FLASH_1
-#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_MAX_FLASH_BANKS 1
-#define CFG_MAX_FLASH_SECT 256
-#define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */
-#define CFG_FLASH_LOCK_TOUT (10*CFG_HZ) /* Timeout for Flash Set Lock Bit */
-#define CFG_FLASH_UNLOCK_TOUT (10*CFG_HZ) /* Timeout for Flash Clear Lock Bits */
-#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
-
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_OFFSET 0x20000 /* after u-boot.bin */
-#define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_ENV_OFFSET)
-#define CFG_ENV_SIZE 0x20000
-
-#define CFG_LOAD_ADDR 0x21000000 /* default load address */
-
-#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
-
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_MAXARGS 32 /* max number of command args */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-
-#define CFG_DEVICE_DEREGISTER /* needs device_deregister */
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 256
+#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_LOCK_TOUT (10*CONFIG_SYS_HZ) /* Timeout for Flash Set Lock Bit */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT (10*CONFIG_SYS_HZ) /* Timeout for Flash Clear Lock Bits */
+#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_OFFSET 0x20000 /* after u-boot.bin */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE 0x20000
+
+#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
+
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
+
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+
+#define CONFIG_SYS_DEVICE_DEREGISTER /* needs device_deregister */
#define LITTLEENDIAN 1 /* used by usb_ohci.c */
-#ifndef __ASSEMBLY__
-/*-----------------------------------------------------------------------
- * Board specific extension for bd_info
- *
- * This structure is embedded in the global bd_info (bd_t) structure
- * and can be used by the board specific code (eg board/...)
- */
-
-struct bd_info_ext {
- /* helper variable for board environment handling
- *
- * env_crc_valid == 0 => uninitialised
- * env_crc_valid > 0 => environment crc in flash is valid
- * env_crc_valid < 0 => environment crc in flash is invalid
- */
- int env_crc_valid;
-};
-#endif /* __ASSEMBLY__ */
-
-#define CFG_HZ 1000
-#define CFG_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */
/* AT91C_TC_TIMER_DIV1_CLOCK */
#define CONFIG_STACKSIZE (32*1024) /* regular stack */
#error CONFIG_USE_IRQ not supported
#endif
-#define CFG_DEVICE_NULLDEV 1 /* enble null device */
+#define CONFIG_SYS_DEVICE_NULLDEV 1 /* enble null device */
#undef CONFIG_SILENT_CONSOLE /* enable silent startup */
#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n", bootdelay
#define CONFIG_AUTOBOOT_STOP_STR " "
#define CONFIG_AUTOBOOT_DELAY_STR "d"
projects / karo-tx-uboot.git / blobdiff