imx:mx6sxsabresd spl support in header file

[karo-tx-uboot.git] / include / configs / mx6sxsabresd.h

diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index 1eda65e0818c5323a2d0c48094f5916affd5d730..61c1d2b7ec26651e8dfab68367572515ecd94b7e 100644 (file)
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -14,10 +14,15 @@
 #include <linux/sizes.h>
 #include "mx6_common.h"
 
-#define CONFIG_MX6
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
+#ifdef CONFIG_SPL
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#include "imx6_spl.h"
+#endif
+
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -28,7 +33,6 @@
 #define CONFIG_SYS_MALLOC_LEN          (3 * SZ_1M)
 
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_UART
@@ -59,7 +63,7 @@
        "fdt_addr=0x88000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
-       "mmcdev=0\0" \
+       "mmcdev=2\0" \
        "mmcpart=1\0" \
        "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
        "mmcargs=setenv bootargs console=${console},${baudrate} " \
@@ -159,7 +163,7 @@
 /* MMC Configuration */
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR      0
+#define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC4_BASE_ADDR
 
 #define CONFIG_MMC
 #define CONFIG_CMD_MMC
@@ -198,13 +202,66 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
+
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS   0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#endif
+
+#define CONFIG_CMD_PCI
+#ifdef CONFIG_CMD_PCI
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_PCIE_IMX
+#define CONFIG_PCIE_IMX_PERST_GPIO     IMX_GPIO_NR(2, 0)
+#define CONFIG_PCIE_IMX_POWER_GPIO     IMX_GPIO_NR(2, 1)
+#endif
+
+#define CONFIG_DM
+#define CONFIG_DM_THERMAL
+#define CONFIG_SYS_MALLOC_F_LEN        (1 << 10)
+#define CONFIG_IMX6_THERMAL
+
+#define CONFIG_CMD_FUSE
+#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
+#define CONFIG_MXC_OCOTP
+#endif
+
 /* FLASH and environment organization */
 #define CONFIG_SYS_NO_FLASH
 
+#define CONFIG_CMD_TIME
+
+#define CONFIG_FSL_QSPI
+
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SYS_FSL_QSPI_LE
+#define CONFIG_SYS_FSL_QSPI_AHB
+#ifdef CONFIG_MX6SX_SABRESD_REVA
+#define FSL_QSPI_FLASH_SIZE            SZ_16M
+#else
+#define FSL_QSPI_FLASH_SIZE            SZ_32M
+#endif
+#define FSL_QSPI_FLASH_NUM             2
+#endif
+
 #define CONFIG_ENV_OFFSET              (6 * SZ_64K)
 #define CONFIG_ENV_SIZE                        SZ_8K
 #define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV         0
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_CMD_BOOTZ
@@ -213,4 +270,9 @@
 #define CONFIG_CMD_CACHE
 #endif
 
+#define CONFIG_SYS_FSL_USDHC_NUM       3
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_SYS_MMC_ENV_DEV         2  /*USDHC4*/
+#endif
+
 #endif                         /* __CONFIG_H */