tegra: omap: alpha-sort USB ethernet items for Asix and SMSC

[karo-tx-uboot.git] / include / configs / omap3_beagle.h

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 4487451acd4a46c665318e92cc86fbfc85edfac0..9f51a7007a59d46ef007ab3df19d7a1f611e3808 100644 (file)
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -6,7 +6,7 @@
  *
  * Configuration settings for the TI OMAP3530 Beagle board.
  *
- * SPDX-License-Identifier:    GPL-2.0+ 
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -19,6 +19,7 @@
 #define CONFIG_OMAP34XX                1       /* which is a 34XX */
 #define CONFIG_OMAP3_BEAGLE    1       /* working with BEAGLE */
 #define CONFIG_OMAP_GPIO
+#define CONFIG_OMAP_COMMON
 
 #define CONFIG_SDRC    /* The chip has SDRC controller */
 
@@ -117,14 +118,14 @@
 #define CONFIG_USB_EHCI_OMAP
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       147
 
-#define CONFIG_USB_ULPI
-#define CONFIG_USB_ULPI_VIEWPORT_OMAP
-
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
 #define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_SMSC95XX
 
+/* GPIO banks */
+#define CONFIG_OMAP3_GPIO_5            /* GPIO128..159 is in GPIO bank 5 */
+#define CONFIG_OMAP3_GPIO_6            /* GPIO160..191 is in GPIO bank 6 */
 
 /* commands to include */
 #include <config_cmd_default.h>
@@ -160,11 +161,10 @@
 #undef CONFIG_CMD_IMLS         /* List all found images        */
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C                        1
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_I2C_SLAVE           1
-#define CONFIG_I2C_MULTI_BUS           1
-#define CONFIG_DRIVER_OMAP34XX_I2C     1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED    100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE    1
+#define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_VIDEO_OMAP3     /* DSS Support                  */
 
 /*
@@ -183,8 +183,6 @@
 #define CONFIG_SYS_NAND_BASE           NAND_BASE       /* physical address */
                                                        /* to access nand at */
                                                        /* CS0 */
-#define GPMC_NAND_ECC_LP_x16_LAYOUT    1
-
 #define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of NAND */
                                                        /* devices */
 
@@ -241,6 +239,8 @@
                        "setenv fdtfile omap3-beagle.dtb; fi; " \
                "if test $beaglerev = Cx; then " \
                        "setenv fdtfile omap3-beagle.dtb; fi; " \
+               "if test $beaglerev = C4; then " \
+                       "setenv fdtfile omap3-beagle.dtb; fi; " \
                "if test $beaglerev = xMAB; then " \
                        "setenv fdtfile omap3-beagle-xm.dtb; fi; " \
                "if test $beaglerev = xMC; then " \
@@ -340,7 +340,6 @@
  */
 #define CONFIG_SYS_TIMERBASE           (OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ                  1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
@@ -432,6 +431,7 @@
                                                10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       3
+#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_HAM1_CODE_HW
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000