include/configs: Remove CONFIG_SYS_64BIT_STRTOUL

[karo-tx-uboot.git] / include / configs / p1_p2_rdb_pc.h

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index b9b89cfa5dca84274267e3f4dca4800ec4422f33..04fd8d07f58a6529e6858f85b3df91cd81327683 100644 (file)
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -184,7 +184,7 @@
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_CMD_SATA
-#define CONFIG_SATA_SIL3114
+#define CONFIG_SATA_SIL
 #define CONFIG_SYS_SATA_MAX_DEVICE     2
 #define CONFIG_LIBATA
 #define CONFIG_LBA48
@@ -204,9 +204,8 @@
 #define CONFIG_BTB
 
 #define CONFIG_BOARD_EARLY_INIT_F      /* Call board_pre_init */
-#ifdef CONFIG_PHYS_64BIT
+
 #define CONFIG_ENABLE_36BIT_PHYS
-#endif
 
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_ADDR_MAP                        1
@@ -222,17 +221,17 @@
 
 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
        SPL code*/
-#if defined(CONFIG_NAND_U_BOOT) && defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_NAND_SPL)
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR3
-#define CONFIG_DDR_RAW_TIMING
+#define CONFIG_SYS_DDR_RAW_TIMING
 #define CONFIG_DDR_SPD
 #define CONFIG_SYS_SPD_BUS_NUM 1
 #define SPD_EEPROM_ADDRESS 0x52
-#define CONFIG_FSL_DDR_INTERACTIVE
+#undef CONFIG_FSL_DDR_INTERACTIVE
 
 #ifdef CONFIG_P1020MBG
 #define CONFIG_SYS_SDRAM_SIZE_LAW      LAW_SIZE_2G
@@ -535,9 +534,6 @@
 #define CONFIG_OF_BOARD_SETUP
 #define CONFIG_OF_STDOUT_VIA_ALIAS
 
-#define CONFIG_SYS_64BIT_VSPRINTF
-#define CONFIG_SYS_64BIT_STRTOUL
-
 /* new uImage format support */
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE     /* enable fit_format_{error,warning}() */
@@ -631,23 +627,6 @@
 #endif
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
 
-
-/*PCIE video card used*/
-#define VIDEO_IO_OFFSET                CONFIG_SYS_PCIE2_IO_VIRT
-
-/* video */
-#define CONFIG_VIDEO
-#ifdef CONFIG_VIDEO
-#define CONFIG_BIOSEMU
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_ATI_RADEON_FB
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
-#endif
-
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP /* do pci plug-and-play */
 #define CONFIG_E1000   /* Defind e1000 pci Ethernet card*/
 #define CONFIG_CMD_PCI
@@ -658,11 +637,6 @@
 #endif /* CONFIG_PCI */
 
 #if defined(CONFIG_TSEC_ENET)
-
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI
-#endif
-
 #define CONFIG_MII             /* MII PHY management */
 #define CONFIG_TSEC1
 #define CONFIG_TSEC1_NAME      "eTSEC1"
@@ -694,8 +668,9 @@
 
 #ifdef CONFIG_QE
 /* QE microcode/firmware address */
-#define CONFIG_SYS_QE_FW_ADDR          0xefec0000
-#define CONFIG_SYS_QE_FW_LENGTH                0x10000
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
+#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xefec0000
+#define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #endif /* CONFIG_QE */
 
 #ifdef CONFIG_P1025RDB
@@ -749,6 +724,7 @@
 #define CONFIG_ENV_SECT_SIZE   0x10000
 #elif defined(CONFIG_RAMBOOT_SDCARD)
 #define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_FSL_FIXED_MMC_LOCATION
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_SYS_MMC_ENV_DEV 0
 #elif defined(CONFIG_NAND_U_BOOT)
@@ -858,8 +834,8 @@
  * Environment Configuration
  */
 #define CONFIG_HOSTNAME                unknown
-#define CONFIG_ROOTPATH                /opt/nfsroot
-#define CONFIG_BOOTFILE                uImage
+#define CONFIG_ROOTPATH                "/opt/nfsroot"
+#define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_UBOOTPATH       u-boot.bin /* U-Boot image on TFTP server */
 
 /* default location for tftp and bootm */