karo: tx6: increase SYS_BOOTM_LEN to 32MiB

[karo-tx-uboot.git] / include / configs / sbc8641d.h

diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index cf97db94c81d4283e67d0acad35f3a1d69c2323a..00aab6b3d51d734abc234e59d1daf5f7932e8dcc 100644 (file)
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -7,21 +7,20 @@
  *
  * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
  *
- * SPDX-License-Identifier:    GPL-2.0+ 
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
  * SBC8641D board configuration file
  *
  * Make sure you change the MAC address and other network params first,
- * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
+ * search for CONFIG_SERVERIP, etc in this file.
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 /* High Level Configuration Options */
-#define CONFIG_MPC86xx         1       /* MPC86xx */
 #define CONFIG_MPC8641         1       /* MPC8641 specific */
 #define CONFIG_SBC8641D                1       /* SBC8641D board specific */
 #define CONFIG_MP              1       /* support multiple processors */
@@ -480,10 +479,9 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
 
-#include <config_cmd_default.h>
-    #define CONFIG_CMD_PING
-    #define CONFIG_CMD_I2C
-    #define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -496,7 +494,6 @@
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
     #define CONFIG_SYS_CBSIZE  1024            /* Console I/O Buffer Size */
@@ -507,7 +504,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -525,21 +521,12 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*
  * Environment Configuration
  */
 
-/* The mac addresses for all ethernet interface */
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_ETHADDR   02:E0:0C:00:00:01
-#define CONFIG_ETH1ADDR  02:E0:0C:00:01:FD
-#define CONFIG_ETH2ADDR  02:E0:0C:00:02:FD
-#define CONFIG_ETH3ADDR  02:E0:0C:00:03:FD
-#endif
-
 #define CONFIG_HAS_ETH0                1
 #define CONFIG_HAS_ETH1                1
 #define CONFIG_HAS_ETH2                1