* (C) Copyright 2009
* Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _SPEAR_COMMON_H
* Common configurations used for both spear3xx as well as spear6xx
*/
+#define CONFIG_SYS_GENERIC_BOARD
+
/* U-boot Load Address */
#define CONFIG_SYS_TEXT_BASE 0x00700000
/* Ethernet driver configuration */
#define CONFIG_MII
-#define CONFIG_DESIGNWARE_ETH
-#define CONFIG_DW_SEARCH_PHY
-#define CONFIG_DW0_PHY 1
-#define CONFIG_NET_MULTI
+#define CONFIG_PHYLIB
#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
-#define CONFIG_DW_AUTONEG
+#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
/* USBD driver configuration */
#if defined(CONFIG_SPEAR_USBTTY)
#define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0"
/* I2C driver configuration */
-#define CONFIG_HARD_I2C
-#define CONFIG_DW_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_DW
+#if defined(CONFIG_SPEAR600)
+#define CONFIG_SYS_I2C_BASE 0xD0200000
+#elif defined(CONFIG_SPEAR300)
+#define CONFIG_SYS_I2C_BASE 0xD0180000
+#elif defined(CONFIG_SPEAR310)
+#define CONFIG_SYS_I2C_BASE 0xD0180000
+#elif defined(CONFIG_SPEAR320)
+#define CONFIG_SYS_I2C_BASE 0xD0180000
+#endif
#define CONFIG_SYS_I2C_SPEED 400000
#define CONFIG_SYS_I2C_SLAVE 0x02
#define CONFIG_I2C_CHIPADDRESS 0x50
/* Timer, HZ specific defines */
-#define CONFIG_SYS_HZ 1000
/* Flash configuration */
#if defined(CONFIG_FLASH_PNOR)
-#define CONFIG_SPEAR_EMI 1
+#define CONFIG_SPEAR_EMI
#else
#define CONFIG_ST_SMI
#endif
#define CONFIG_CMD_I2C
#define CONFIG_CMD_NAND
#define CONFIG_CMD_ENV
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_RUN
#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_NET
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <config_cmd_default.h>
-
/*
* Default Environment Varible definitions
*/
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_MISC_INIT_R 1
-#define CONFIG_ZERO_BOOTDELAY_CHECK 1
-#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_STOP_STR " "
-#define CONFIG_AUTOBOOT_PROMPT \
- "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_MISC_INIT_R
+#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_SYS_MEMTEST_START 0x00800000
#define CONFIG_SYS_MEMTEST_END 0x04000000
#define CONFIG_SYS_MALLOC_LEN (1024*1024)
#define CONFIG_IDENT_STRING "-SPEAr"
#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT "u-boot> "
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LOAD_ADDR 0x00800000
-#define CONFIG_SYS_CONSOLE_INFO_QUIET 1
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_SYS_FLASH_EMPTY_INFO
-/* Stack sizes */
-#define CONFIG_STACKSIZE (128*1024)
-
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024)
-#define CONFIG_STACKSIZE_FIQ (4*1024)
-#endif
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0x00000000