#define CONFIG_SYS_TEXT_BASE 0x4a000000
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM)
+# define CONFIG_CMD_DM
+# define CONFIG_DM_GPIO
+# define CONFIG_DM_SERIAL
+# define CONFIG_DW_SERIAL
+# define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
+#endif
+
/*
* Display CPU information
*/
#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_SYS_PROMPT "sunxi# "
+
/* Serial & console */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
/* ns16550 reg in the low bits of cpu reg */
-#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_CLK 24000000
-#define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE
-#define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE
-#define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE
-#define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE
+#ifndef CONFIG_DM_SERIAL
+# define CONFIG_SYS_NS16550_REG_SIZE -4
+# define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE
+# define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE
+# define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE
+# define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE
+# define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE
+#endif
/* DRAM Base */
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define CONFIG_INITRD_TAG
/* mmc config */
+#if !defined(CONFIG_UART0_PORT_F)
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_MMC
#define CONFIG_MMC_SUNXI_SLOT 0
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */
+#endif
/* 4MB of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
* Miscellaneous configurable options
*/
#define CONFIG_CMD_ECHO
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_GENERIC_BOARD
/* standalone support */
#define CONFIG_STANDALONE_LOAD_ADDR 0x42000000
-#define CONFIG_SYS_HZ 1000
-
/* baudrate */
#define CONFIG_BAUDRATE 115200
#define CONFIG_SPL_MAX_SIZE 0x5fe0 /* 24KB on sun4i/sun7i */
#define CONFIG_SPL_LIBDISK_SUPPORT
+
+#if !defined(CONFIG_UART0_PORT_F)
#define CONFIG_SPL_MMC_SUPPORT
+#endif
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 /* 512 KiB */
/* I2C */
+#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER
#define CONFIG_SPL_I2C_SUPPORT
+#endif
+
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MVTWSI
#define CONFIG_SYS_I2C_SPEED 400000
/* GPIO */
#define CONFIG_SUNXI_GPIO
+#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_CMD_GPIO
+#ifdef CONFIG_VIDEO
+/*
+ * The amount of RAM that is reserved for the FB. This will not show up as
+ * RAM to the kernel, but will be reclaimed by a KMS driver in future.
+ */
+#define CONFIG_SUNXI_FB_SIZE (9 << 20)
+
+/* Do we want to initialize a simple FB? */
+#define CONFIG_VIDEO_DT_SIMPLEFB
+
+#define CONFIG_VIDEO_SUNXI
+
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_STD_TIMINGS
+#define CONFIG_I2C_EDID
+
+/* allow both serial and cfb console. */
+#define CONFIG_CONSOLE_MUX
+/* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+
+#define CONFIG_SYS_MEM_TOP_HIDE ((CONFIG_SUNXI_FB_SIZE + 0xFFF) & ~0xFFF)
+
+/* To be able to hook simplefb into dt */
+#ifdef CONFIG_VIDEO_DT_SIMPLEFB
+#define CONFIG_OF_BOARD_SETUP
+#endif
+
+#endif /* CONFIG_VIDEO */
+
/* Ethernet support */
#ifdef CONFIG_SUNXI_EMAC
#define CONFIG_MII /* MII PHY management */
#endif
#ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
+#endif
+
+#ifdef CONFIG_USB_MUSB_SUNXI
+#define CONFIG_MUSB_HOST
+#define CONFIG_MUSB_PIO_ONLY
+#endif
+
+#if defined CONFIG_USB_EHCI || defined CONFIG_USB_MUSB_SUNXI
+#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#endif
+#ifdef CONFIG_USB_KEYBOARD
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_PREBOOT
+#define CONFIG_SYS_STDIO_DEREGISTER
+#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
+#endif
+
#if !defined CONFIG_ENV_IS_IN_MMC && \
!defined CONFIG_ENV_IS_IN_NAND && \
!defined CONFIG_ENV_IS_IN_FAT && \
#endif
#define CONFIG_MISC_INIT_R
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#ifndef CONFIG_SPL_BUILD
#include <config_distro_defaults.h>
-/* 256M RAM (minimum), 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
- * 1M script, 1M pxe and the ramdisk at the end */
+/* Enable pre-console buffer to get complete log on the VGA console */
+#define CONFIG_PRE_CONSOLE_BUFFER
+#define CONFIG_PRE_CON_BUF_SZ (1024 * 1024)
+/* Use the room between the end of bootm_size and the framebuffer */
+#define CONFIG_PRE_CON_BUF_ADDR 0x4f000000
+
+/*
+ * 240M RAM (256M minimum minus space for the framebuffer),
+ * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
+ * 1M script, 1M pxe and the ramdisk at the end.
+ */
#define MEM_LAYOUT_ENV_SETTINGS \
- "bootm_size=0x10000000\0" \
+ "bootm_size=0xf000000\0" \
"kernel_addr_r=0x42000000\0" \
"fdt_addr_r=0x43000000\0" \
"scriptaddr=0x43100000\0" \
"pxefile_addr_r=0x43200000\0" \
"ramdisk_addr_r=0x43300000\0"
+#ifdef CONFIG_MMC
+#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
+#else
+#define BOOT_TARGET_DEVICES_MMC(func)
+#endif
+
#ifdef CONFIG_AHCI
#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
#else
#define BOOT_TARGET_DEVICES_SCSI(func)
#endif
+#ifdef CONFIG_USB_EHCI
+#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
+#else
+#define BOOT_TARGET_DEVICES_USB(func)
+#endif
+
#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
+ BOOT_TARGET_DEVICES_MMC(func) \
BOOT_TARGET_DEVICES_SCSI(func) \
- func(USB, usb, 0) \
+ BOOT_TARGET_DEVICES_USB(func) \
func(PXE, pxe, na) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
+#ifdef CONFIG_USB_KEYBOARD
+#define CONSOLE_STDIN_SETTINGS \
+ "preboot=usb start\0" \
+ "stdin=serial,usbkbd\0"
+#else
+#define CONSOLE_STDIN_SETTINGS \
+ "stdin=serial\0"
+#endif
+
+#ifdef CONFIG_VIDEO
+#define CONSOLE_STDOUT_SETTINGS \
+ "stdout=serial,vga\0" \
+ "stderr=serial,vga\0"
+#else
+#define CONSOLE_STDOUT_SETTINGS \
+ "stdout=serial\0" \
+ "stderr=serial\0"
+#endif
+
+#define CONSOLE_ENV_SETTINGS \
+ CONSOLE_STDIN_SETTINGS \
+ CONSOLE_STDOUT_SETTINGS
+
#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONSOLE_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
"fdtfile=" CONFIG_FDTFILE "\0" \
"console=ttyS0,115200\0" \
projects / karo-tx-uboot.git / blobdiff