Add GPL-2.0+ SPDX-License-Identifier to source files

[karo-tx-uboot.git] / include / configs / uc100.h

diff --git a/include/configs/uc100.h b/include/configs/uc100.h
index 23f4c825b7eab99ee943a6e154689dbc664f29ff..43acf26679d6c94f4ed4c142ddfa433ebf7bd33f 100644 (file)
--- a/include/configs/uc100.h
+++ b/include/configs/uc100.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2000-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -40,6 +24,8 @@
 
 #define CONFIG_UC100           1       /* ...on a UC100 module         */
 
+#define        CONFIG_SYS_TEXT_BASE    0x40700000
+
 #define MPC8XX_FACT            4               /* Multiply by 4        */
 #define MPC8XX_XIN             25000000        /* 25.0 MHz in          */
 #define CONFIG_8xx_GCLK_FREQ   (MPC8XX_FACT * MPC8XX_XIN)
@@ -160,9 +146,6 @@
 #if 0
 #define        CONFIG_SYS_HUSH_PARSER          1       /* use "hush" command parser    */
 #endif
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define        CONFIG_SYS_PROMPT_HUSH_PS2      "> "
-#endif
 
 #if defined(CONFIG_CMD_KGDB)
 #define        CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size      */
@@ -180,8 +163,6 @@
 
 #define        CONFIG_SYS_HZ                   1000    /* decrementer freq: 1 ms ticks */
 
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 #define CONFIG_AUTO_COMPLETE   1       /* add autocompletion support   */
 
 /*
@@ -198,9 +179,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define        CONFIG_SYS_INIT_RAM_END 0x2F00  /* End of used area in DPRAM    */
-#define        CONFIG_SYS_GBL_DATA_SIZE        64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define        CONFIG_SYS_INIT_RAM_SIZE        0x2F00  /* Size of used area in DPRAM   */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define        CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -335,6 +315,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT     1       /* Use preinit IDE hook */
 #define        CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 
 #undef CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
@@ -499,14 +480,6 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10      /* takes up to 10 msec  */
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define        CONFIG_FEC_ENET         1       /* use FEC ethernet  */
 #define FEC_ENET
 #define CONFIG_MII