/* Internal helper for board drivers which need to override command function */
extern void nand_wait_ready(struct mtd_info *mtd);
-/* locks all blockes present in the device */
+/* locks all blocks present in the device */
extern int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
-/* unlocks specified locked blockes */
+/* unlocks specified locked blocks */
extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
/* The maximum number of NAND chips in an array */
#define NAND_ECC_READ 0
/* Reset Hardware ECC for write */
#define NAND_ECC_WRITE 1
-/* Enable Hardware ECC before syndrom is read back from flash */
+/* Enable Hardware ECC before syndrome is read back from flash */
#define NAND_ECC_READSYN 2
/* Bit mask for flags passed to do_nand_read_ecc */
*/
/* Chip can not auto increment pages */
#define NAND_NO_AUTOINCR 0x00000001
-/* Buswitdh is 16 bit */
+/* Buswidth is 16 bit */
#define NAND_BUSWIDTH_16 0x00000002
/* Device supports partial programming without padding */
#define NAND_NO_PADDING 0x00000004
};
/**
- * struct nand_ecc_ctrl - Control structure for ecc
- * @mode: ecc mode
- * @steps: number of ecc steps per page
- * @size: data bytes per ecc step
- * @bytes: ecc bytes per step
- * @total: total number of ecc bytes per page
- * @prepad: padding information for syndrome based ecc generators
- * @postpad: padding information for syndrome based ecc generators
+ * struct nand_ecc_ctrl - Control structure for ECC
+ * @mode: ECC mode
+ * @steps: number of ECC steps per page
+ * @size: data bytes per ECC step
+ * @bytes: ECC bytes per step
+ * @total: total number of ECC bytes per page
+ * @prepad: padding information for syndrome based ECC generators
+ * @postpad: padding information for syndrome based ECC generators
* @layout: ECC layout control struct pointer
- * @priv: pointer to private ecc control data
- * @hwctl: function to control hardware ecc generator. Must only
+ * @priv: pointer to private ECC control data
+ * @hwctl: function to control hardware ECC generator. Must only
* be provided if an hardware ECC is available
- * @calculate: function for ecc calculation or readback from ecc hardware
- * @correct: function for ecc correction, matching to ecc generator (sw/hw)
+ * @calculate: function for ECC calculation or readback from ECC hardware
+ * @correct: function for ECC correction, matching to ECC generator (sw/hw)
* @read_page_raw: function to read a raw page without ECC
* @write_page_raw: function to write a raw page without ECC
- * @read_page: function to read a page according to the ecc generator
+ * @read_page: function to read a page according to the ECC generator
* requirements.
* @read_subpage: function to read parts of the page covered by ECC.
- * @write_page: function to write a page according to the ecc generator
+ * @write_page: function to write a page according to the ECC generator
* requirements.
+ * @write_oob_raw: function to write chip OOB data without ECC
+ * @read_oob_raw: function to read chip OOB data without ECC
* @read_oob: function to read chip OOB data
* @write_oob: function to write chip OOB data
*/
uint32_t offs, uint32_t len, uint8_t *buf);
void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf);
+ int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page);
+ int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd);
int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page,
int sndcmd);
int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
/**
* struct nand_buffers - buffer structure for read/write
- * @ecccalc: buffer for calculated ecc
- * @ecccode: buffer for ecc read from flash
+ * @ecccalc: buffer for calculated ECC
+ * @ecccode: buffer for ECC read from flash
* @databuf: buffer for data - dynamically sized
*
* Do not change the order of buffers. databuf and oobrbuf must be in
* mtd->oobsize, mtd->writesize and so on.
* @id_data contains the 8 bytes values of NAND_CMD_READID.
* Return with the bus width.
- * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing
+ * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accessing
* device ready/busy line. If set to NULL no access to
* ready/busy is available and the ready/busy information
* is read from the chip status register.
* commands to the chip.
* @waitfunc: [REPLACEABLE] hardwarespecific function for wait on
* ready.
- * @ecc: [BOARDSPECIFIC] ecc control ctructure
+ * @ecc: [BOARDSPECIFIC] ECC control structure
* @buffers: buffer structure for read/write
* @hwcontrol: platform-specific hardware control structure
- * @ops: oob operation operands
* @erase_cmd: [INTERN] erase command write function, selectable due
* to AND support.
* @scan_bbt: [REPLACEABLE] function to scan bad block table
* @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring
* data from array to read regs (tR).
* @state: [INTERN] the current state of the NAND device
- * @oob_poi: poison value buffer
+ * @oob_poi: "poison value buffer," used for laying out OOB data
+ * before writing
* @page_shift: [INTERN] number of address bits in a page (column
* address bits).
* @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock
* non 0 if ONFI supported.
* @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is
* supported, 0 otherwise.
- * @ecclayout: [REPLACEABLE] the default ecc placement scheme
+ * @ecclayout: [REPLACEABLE] the default ECC placement scheme
* @bbt: [INTERN] bad block table pointer
* @bbt_td: [REPLACEABLE] bad block table descriptor for flash
* lookup.
* @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial
* bad block scan.
* @controller: [REPLACEABLE] a pointer to a hardware controller
- * structure which is shared among multiple independend
+ * structure which is shared among multiple independent
* devices.
- * @priv: [OPTIONAL] pointer to private chip date
+ * @priv: [OPTIONAL] pointer to private chip data
* @errstat: [OPTIONAL] hardware specific function to perform
* additional error status checks (determine if errors are
* correctable).
struct nand_buffers *buffers;
struct nand_hw_control hwcontrol;
- struct mtd_oob_ops ops;
-
uint8_t *bbt;
struct nand_bbt_descr *bbt_td;
struct nand_bbt_descr *bbt_md;
#define NAND_MFR_HYNIX 0xad
#define NAND_MFR_MICRON 0x2c
#define NAND_MFR_AMD 0x01
+#define NAND_MFR_MACRONIX 0xc2
/**
* struct nand_flash_dev - NAND Flash Device ID Structure
* @chip_delay: R/B delay value in us
* @options: Option flags, e.g. 16bit buswidth
* @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH
- * @ecclayout: ecc layout info structure
+ * @ecclayout: ECC layout info structure
* @part_probe_types: NULL-terminated array of probe types
- * @set_parts: platform specific function to set partitions
- * @priv: hardware controller specific settings
*/
struct platform_nand_chip {
int nr_chips;