bool use_short_preamble;
};
+/**
+ * enum mac80211_tx_control_flags - flags to describe Tx configuration for
+ * the Tx frame
+ *
+ * These flags are used with the @flags member of &ieee80211_tx_control
+ *
+ * @IEEE80211_TXCTL_REQ_TX_STATUS: request TX status callback for this frame.
+ * @IEEE80211_TXCTL_DO_NOT_ENCRYPT: send this frame without encryption;
+ * e.g., for EAPOL frame
+ * @IEEE80211_TXCTL_USE_RTS_CTS: use RTS-CTS before sending frame
+ * @IEEE80211_TXCTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g.,
+ * for combined 802.11g / 802.11b networks)
+ * @IEEE80211_TXCTL_NO_ACK: tell the low level not to wait for an ack
+ * @IEEE80211_TXCTL_RATE_CTRL_PROBE
+ * @EEE80211_TXCTL_CLEAR_PS_FILT: clear powersave filter
+ * for destination station
+ * @IEEE80211_TXCTL_REQUEUE:
+ * @IEEE80211_TXCTL_FIRST_FRAGMENT: this is a first fragment of the frame
+ * @IEEE80211_TXCTL_LONG_RETRY_LIMIT: this frame should be send using the
+ * through set_retry_limit configured long
+ * retry value
+ * @IEEE80211_TXCTL_EAPOL_FRAME: internal to mac80211
+ * @IEEE80211_TXCTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
+ * @IEEE80211_TXCTL_AMPDU: this frame should be sent as part of an A-MPDU
+ * @IEEE80211_TXCTL_OFDM_HT: this frame can be sent in HT OFDM rates. number
+ * of streams when this flag is on can be extracted
+ * from antenna_sel_tx, so if 1 antenna is marked
+ * use SISO, 2 antennas marked use MIMO, n antennas
+ * marked use MIMO_n.
+ * @IEEE80211_TXCTL_GREEN_FIELD: use green field protection for this frame
+ * @IEEE80211_TXCTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width
+ * @IEEE80211_TXCTL_DUP_DATA: duplicate data frame on both 20 Mhz channels
+ * @IEEE80211_TXCTL_SHORT_GI: send this frame using short guard interval
+ */
+enum mac80211_tx_control_flags {
+ IEEE80211_TXCTL_REQ_TX_STATUS = (1<<0),
+ IEEE80211_TXCTL_DO_NOT_ENCRYPT = (1<<1),
+ IEEE80211_TXCTL_USE_RTS_CTS = (1<<2),
+ IEEE80211_TXCTL_USE_CTS_PROTECT = (1<<3),
+ IEEE80211_TXCTL_NO_ACK = (1<<4),
+ IEEE80211_TXCTL_RATE_CTRL_PROBE = (1<<5),
+ IEEE80211_TXCTL_CLEAR_PS_FILT = (1<<6),
+ IEEE80211_TXCTL_REQUEUE = (1<<7),
+ IEEE80211_TXCTL_FIRST_FRAGMENT = (1<<8),
+ IEEE80211_TXCTL_SHORT_PREAMBLE = (1<<9),
+ IEEE80211_TXCTL_LONG_RETRY_LIMIT = (1<<10),
+ IEEE80211_TXCTL_EAPOL_FRAME = (1<<11),
+ IEEE80211_TXCTL_SEND_AFTER_DTIM = (1<<12),
+ IEEE80211_TXCTL_AMPDU = (1<<13),
+ IEEE80211_TXCTL_OFDM_HT = (1<<14),
+ IEEE80211_TXCTL_GREEN_FIELD = (1<<15),
+ IEEE80211_TXCTL_40_MHZ_WIDTH = (1<<16),
+ IEEE80211_TXCTL_DUP_DATA = (1<<17),
+ IEEE80211_TXCTL_SHORT_GI = (1<<18),
+};
+
/* Transmit control fields. This data structure is passed to low-level driver
* with each TX frame. The low-level driver is responsible for configuring
* the hardware to use given values (depending on what is supported). */
/* retry rate for the last retries */
struct ieee80211_rate *alt_retry_rate;
-#define IEEE80211_TXCTL_REQ_TX_STATUS (1<<0)/* request TX status callback for
- * this frame */
-#define IEEE80211_TXCTL_DO_NOT_ENCRYPT (1<<1) /* send this frame without
- * encryption; e.g., for EAPOL
- * frames */
-#define IEEE80211_TXCTL_USE_RTS_CTS (1<<2) /* use RTS-CTS before sending
- * frame */
-#define IEEE80211_TXCTL_USE_CTS_PROTECT (1<<3) /* use CTS protection for the
- * frame (e.g., for combined
- * 802.11g / 802.11b networks) */
-#define IEEE80211_TXCTL_NO_ACK (1<<4) /* tell the low level not to
- * wait for an ack */
-#define IEEE80211_TXCTL_RATE_CTRL_PROBE (1<<5)
-#define IEEE80211_TXCTL_CLEAR_PS_FILT (1<<6) /* clear powersave filter
- * for destination station */
-#define IEEE80211_TXCTL_REQUEUE (1<<7)
-#define IEEE80211_TXCTL_FIRST_FRAGMENT (1<<8) /* this is a first fragment of
- * the frame */
-#define IEEE80211_TXCTL_SHORT_PREAMBLE (1<<9)
-#define IEEE80211_TXCTL_LONG_RETRY_LIMIT (1<<10) /* this frame should be send
- * using the through
- * set_retry_limit configured
- * long retry value */
-#define IEEE80211_TXCTL_EAPOL_FRAME (1<<11) /* internal to mac80211 */
-#define IEEE80211_TXCTL_SEND_AFTER_DTIM (1<<12) /* send this frame after DTIM
- * beacon */
-#define IEEE80211_TXCTL_AMPDU (1<<13) /* this frame should be sent
- * as part of an A-MPDU */
- u32 flags; /* tx control flags defined
- * above */
+ u32 flags; /* tx control flags defined above */
u8 key_idx; /* keyidx from hw->set_key(), undefined if
* IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */
u8 retry_limit; /* 1 = only first attempt, 2 = one retry, ..
* This could be used when set_retry_limit
* is not implemented by the driver */
- u8 antenna_sel_tx; /* 0 = default/diversity, 1 = Ant0, 2 = Ant1 */
+ u8 antenna_sel_tx; /* 0 = default/diversity, otherwise bit
+ * position represents antenna number used */
u8 icv_len; /* length of the ICV/MIC field in octets */
u8 iv_len; /* length of the IV field in octets */
u8 queue; /* hardware queue to use for this frame;
* @channel: the channel to tune to
*/
struct ieee80211_conf {
- unsigned int regulatory_domain;
int radio_enabled;
int beacon_int;
* @IEEE80211_IF_TYPE_WDS: interface in WDS mode.
* @IEEE80211_IF_TYPE_VLAN: VLAN interface bound to an AP, drivers
* will never see this type.
+ * @IEEE80211_IF_TYPE_MESH_POINT: 802.11s mesh point
*/
enum ieee80211_if_types {
IEEE80211_IF_TYPE_INVALID,
IEEE80211_IF_TYPE_AP,
IEEE80211_IF_TYPE_STA,
IEEE80211_IF_TYPE_IBSS,
+ IEEE80211_IF_TYPE_MESH_POINT,
IEEE80211_IF_TYPE_MNTR,
IEEE80211_IF_TYPE_WDS,
IEEE80211_IF_TYPE_VLAN,
u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *))));
};
+static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
+{
+#ifdef CONFIG_MAC80211_MESH
+ return vif->type == IEEE80211_IF_TYPE_MESH_POINT;
+#endif
+ return false;
+}
+
/**
* struct ieee80211_if_init_conf - initial configuration of an interface
*
/**
* ieee80211_register_hw - Register hardware device
*
- * You must call this function before any other functions
- * except ieee80211_register_hwmode.
+ * You must call this function before any other functions in
+ * mac80211. Note that before a hardware can be registered, you
+ * need to fill the contained wiphy's information.
*
* @hw: the device to register as returned by ieee80211_alloc_hw()
*/
projects / mv-sheeva.git / blobdiff