#ifndef _SPI_FLASH_H_
#define _SPI_FLASH_H_
-#include <spi.h>
+#include <dm.h> /* Because we dereference struct udevice here */
#include <linux/types.h>
-#include <linux/compiler.h>
#ifndef CONFIG_SF_DEFAULT_SPEED
# define CONFIG_SF_DEFAULT_SPEED 1000000
# define CONFIG_SF_DEFAULT_BUS 0
#endif
-/* sf param flags */
-#define SECT_4K 1 << 1
-#define SECT_32K 1 << 2
-#define E_FSR 1 << 3
-#define WR_QPP 1 << 4
-
-/* Enum list - Full read commands */
-enum spi_read_cmds {
- ARRAY_SLOW = 1 << 0,
- DUAL_OUTPUT_FAST = 1 << 1,
- DUAL_IO_FAST = 1 << 2,
- QUAD_OUTPUT_FAST = 1 << 3,
- QUAD_IO_FAST = 1 << 4,
-};
-#define RD_EXTN ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST
-#define RD_FULL RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST
-
-/* Dual SPI flash memories */
-enum spi_dual_flash {
- SF_SINGLE_FLASH = 0,
- SF_DUAL_STACKED_FLASH = 1 << 0,
- SF_DUAL_PARALLEL_FLASH = 1 << 1,
-};
-
-/**
- * struct spi_flash_params - SPI/QSPI flash device params structure
- *
- * @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO])
- * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id])
- * @ext_jedec: Device ext_jedec ID
- * @sector_size: Sector size of this device
- * @nr_sectors: No.of sectors on this device
- * @e_rd_cmd: Enum list for read commands
- * @flags: Important param, for flash specific behaviour
- */
-struct spi_flash_params {
- const char *name;
- u32 jedec;
- u16 ext_jedec;
- u32 sector_size;
- u32 nr_sectors;
- u8 e_rd_cmd;
- u16 flags;
-};
-
-extern const struct spi_flash_params spi_flash_params_table[];
+struct spi_slave;
/**
* struct spi_flash - SPI flash structure
*
* @spi: SPI slave
+ * @dev: SPI flash device
+ * @flags: Indication of spi flash flags
* @name: Name of SPI flash
* @dual_flash: Indicates dual flash memories - dual stacked, parallel
* @shift: Flash shift useful in dual parallel
*/
struct spi_flash {
struct spi_slave *spi;
+#ifdef CONFIG_DM_SPI_FLASH
+ struct udevice *dev;
+ u16 flags;
+#endif
const char *name;
u8 dual_flash;
u8 shift;
u8 dummy_byte;
void *memory_map;
+#ifndef CONFIG_DM_SPI_FLASH
+ /*
+ * These are not strictly needed for driver model, but keep them here
+ * while the transition is in progress.
+ *
+ * Normally each driver would provide its own operations, but for
+ * SPI flash most chips use the same algorithms. One approach is
+ * to create a 'common' SPI flash device which knows how to talk
+ * to most devices, and then allow other drivers to be used instead
+ * if required, perhaps with a way of scanning through the list to
+ * find the driver that matches the device.
+ */
int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf);
int (*write)(struct spi_flash *flash, u32 offset, size_t len,
const void *buf);
int (*erase)(struct spi_flash *flash, u32 offset, size_t len);
+#endif
+};
+
+struct dm_spi_flash_ops {
+ int (*read)(struct udevice *dev, u32 offset, size_t len, void *buf);
+ int (*write)(struct udevice *dev, u32 offset, size_t len,
+ const void *buf);
+ int (*erase)(struct udevice *dev, u32 offset, size_t len);
};
+/* Access the serial operations for a device */
+#define sf_get_ops(dev) ((struct dm_spi_flash_ops *)(dev)->driver->ops)
+
+#ifdef CONFIG_DM_SPI_FLASH
+/**
+ * spi_flash_read_dm() - Read data from SPI flash
+ *
+ * @dev: SPI flash device
+ * @offset: Offset into device in bytes to read from
+ * @len: Number of bytes to read
+ * @buf: Buffer to put the data that is read
+ * @return 0 if OK, -ve on error
+ */
+int spi_flash_read_dm(struct udevice *dev, u32 offset, size_t len, void *buf);
+
+/**
+ * spi_flash_write_dm() - Write data to SPI flash
+ *
+ * @dev: SPI flash device
+ * @offset: Offset into device in bytes to write to
+ * @len: Number of bytes to write
+ * @buf: Buffer containing bytes to write
+ * @return 0 if OK, -ve on error
+ */
+int spi_flash_write_dm(struct udevice *dev, u32 offset, size_t len,
+ const void *buf);
+
+/**
+ * spi_flash_erase_dm() - Erase blocks of the SPI flash
+ *
+ * Note that @len must be a muiltiple of the flash sector size.
+ *
+ * @dev: SPI flash device
+ * @offset: Offset into device in bytes to start erasing
+ * @len: Number of bytes to erase
+ * @return 0 if OK, -ve on error
+ */
+int spi_flash_erase_dm(struct udevice *dev, u32 offset, size_t len);
+
+int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs,
+ unsigned int max_hz, unsigned int spi_mode,
+ struct udevice **devp);
+
+/* Compatibility function - this is the old U-Boot API */
+struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int spi_mode);
+
+/* Compatibility function - this is the old U-Boot API */
+void spi_flash_free(struct spi_flash *flash);
+
+int spi_flash_remove(struct udevice *flash);
+
+static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
+ size_t len, void *buf)
+{
+ return spi_flash_read_dm(flash->dev, offset, len, buf);
+}
+
+static inline int spi_flash_write(struct spi_flash *flash, u32 offset,
+ size_t len, const void *buf)
+{
+ return spi_flash_write_dm(flash->dev, offset, len, buf);
+}
+
+static inline int spi_flash_erase(struct spi_flash *flash, u32 offset,
+ size_t len)
+{
+ return spi_flash_erase_dm(flash->dev, offset, len);
+}
+
+struct sandbox_state;
+
+int sandbox_sf_bind_emul(struct sandbox_state *state, int busnum, int cs,
+ struct udevice *bus, int of_offset, const char *spec);
+
+void sandbox_sf_unbind_emul(struct sandbox_state *state, int busnum, int cs);
+
+#else
struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode);
{
return flash->erase(flash, offset, len);
}
+#endif
void spi_boot(void) __noreturn;
void spi_spl_load_image(uint32_t offs, unsigned int size, void *vdst);