Merge branch 'master' of /home/stefan/git/u-boot/u-boot

[karo-tx-uboot.git] / lib_arm / board.c

diff --git a/lib_arm/board.c b/lib_arm/board.c
index 8f4e19bfcb5bf637452cc944d90a5ae58a965c41..7e7a28271dff58cb941b1e0647a3fe080d53456e 100644 (file)
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -46,10 +46,10 @@
 #include <net.h>
 
 #ifdef CONFIG_DRIVER_SMC91111
-#include "../drivers/smc91111.h"
+#include "../drivers/net/smc91111.h"
 #endif
 #ifdef CONFIG_DRIVER_LAN91C96
-#include "../drivers/lan91c96.h"
+#include "../drivers/net/lan91c96.h"
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -58,6 +58,10 @@ DECLARE_GLOBAL_DATA_PTR;
 void nand_init (void);
 #endif
 
+#if defined(CONFIG_CMD_ONENAND)
+void onenand_init(void);
+#endif
+
 ulong monitor_flash_len;
 
 #ifdef CONFIG_HAS_DATAFLASH
@@ -111,6 +115,26 @@ void *sbrk (ptrdiff_t increment)
        return ((void *) old);
 }
 
+/************************************************************************
+ * Coloured LED functionality
+ ************************************************************************
+ * May be supplied by boards if desired
+ */
+void inline __coloured_LED_init (void) {}
+void inline coloured_LED_init (void) __attribute__((weak, alias("__coloured_LED_init")));
+void inline __red_LED_on (void) {}
+void inline red_LED_on (void) __attribute__((weak, alias("__red_LED_on")));
+void inline __red_LED_off(void) {}
+void inline red_LED_off(void)       __attribute__((weak, alias("__red_LED_off")));
+void inline __green_LED_on(void) {}
+void inline green_LED_on(void) __attribute__((weak, alias("__green_LED_on")));
+void inline __green_LED_off(void) {}
+void inline green_LED_off(void)__attribute__((weak, alias("__green_LED_off")));
+void inline __yellow_LED_on(void) {}
+void inline yellow_LED_on(void)__attribute__((weak, alias("__yellow_LED_on")));
+void inline __yellow_LED_off(void) {}
+void inline yellow_LED_off(void)__attribute__((weak, alias("__yellow_LED_off")));
+
 /************************************************************************
  * Init Utilities                                                      *
  ************************************************************************
@@ -185,7 +209,6 @@ static void display_flash_config (ulong size)
 }
 #endif /* CFG_NO_FLASH */
 
-
 /*
  * Breathe some life into the board...
  *
@@ -301,6 +324,10 @@ void start_armboot (void)
        nand_init();            /* go init the NAND */
 #endif
 
+#if defined(CONFIG_CMD_ONENAND)
+       onenand_init();
+#endif
+
 #ifdef CONFIG_HAS_DATAFLASH
        AT91F_DataflashInit();
        dataflash_print_info();
@@ -314,6 +341,10 @@ void start_armboot (void)
        drv_vfd_init();
 #endif /* CONFIG_VFD */
 
+#ifdef CONFIG_SERIAL_MULTI
+       serial_initialize();
+#endif
+
        /* IP Address */
        gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
 
@@ -364,6 +395,13 @@ void start_armboot (void)
        enable_interrupts ();
 
        /* Perform network card initialisation if necessary */
+#ifdef CONFIG_DRIVER_TI_EMAC
+extern void dm644x_eth_set_mac_addr (const u_int8_t *addr);
+       if (getenv ("ethaddr")) {
+               dm644x_eth_set_mac_addr(gd->bd->bi_enetaddr);
+       }
+#endif
+
 #ifdef CONFIG_DRIVER_CS8900
        cs8900_get_enetaddr (gd->bd->bi_enetaddr);
 #endif
@@ -392,6 +430,10 @@ void start_armboot (void)
        puts ("Net:   ");
 #endif
        eth_initialize(gd->bd);
+#if defined(CONFIG_RESET_PHY_R)
+       debug ("Reset Ethernet PHY\n");
+       reset_phy();
+#endif
 #endif
        /* main_loop() can return to retry autoboot, if so just run it again. */
        for (;;) {