/* Enable to test recovery from slab corruption on boot */
#undef SLUB_RESILIENCY_TEST
-#if PAGE_SHIFT <= 12
-
-/*
- * Small page size. Make sure that we do not fragment memory
- */
-#define DEFAULT_MAX_ORDER 1
-#define DEFAULT_MIN_OBJECTS 4
-
-#else
-
-/*
- * Large page machines are customarily able to handle larger
- * page orders.
- */
-#define DEFAULT_MAX_ORDER 2
-#define DEFAULT_MIN_OBJECTS 8
-
-#endif
-
/*
* Mininum number of partial slabs. These will be left on the partial
* lists even if they are empty. kmem_cache_shrink may reclaim them.
/* Internal SLUB flags */
#define __OBJECT_POISON 0x80000000 /* Poison object */
#define __SYSFS_ADD_DEFERRED 0x40000000 /* Not yet visible via sysfs */
-#define __KMALLOC_CACHE 0x20000000 /* objects freed using kfree */
-#define __PAGE_ALLOC_FALLBACK 0x10000000 /* Allow fallback to page alloc */
-
-/* Not all arches define cache_line_size */
-#ifndef cache_line_size
-#define cache_line_size() L1_CACHE_BYTES
-#endif
static int kmem_size = sizeof(struct kmem_cache);
{
#ifdef CONFIG_NUMA
struct zonelist *zonelist;
- struct zone **z;
+ struct zoneref *z;
+ struct zone *zone;
+ enum zone_type high_zoneidx = gfp_zone(flags);
struct page *page;
/*
get_cycles() % 1024 > s->remote_node_defrag_ratio)
return NULL;
- zonelist = &NODE_DATA(
- slab_node(current->mempolicy))->node_zonelists[gfp_zone(flags)];
- for (z = zonelist->zones; *z; z++) {
+ zonelist = node_zonelist(slab_node(current->mempolicy), flags);
+ for_each_zone_zonelist(zone, z, zonelist, high_zoneidx) {
struct kmem_cache_node *n;
- n = get_node(s, zone_to_nid(*z));
+ n = get_node(s, zone_to_nid(zone));
- if (n && cpuset_zone_allowed_hardwall(*z, flags) &&
+ if (n && cpuset_zone_allowed_hardwall(zone, flags) &&
n->nr_partial > MIN_PARTIAL) {
page = get_partial_node(n);
if (page)
c->page = new;
goto load_freelist;
}
-
- /*
- * No memory available.
- *
- * If the slab uses higher order allocs but the object is
- * smaller than a page size then we can fallback in emergencies
- * to the page allocator via kmalloc_large. The page allocator may
- * have failed to obtain a higher order page and we can try to
- * allocate a single page if the object fits into a single page.
- * That is only possible if certain conditions are met that are being
- * checked when a slab is created.
- */
- if (!(gfpflags & __GFP_NORETRY) &&
- (s->flags & __PAGE_ALLOC_FALLBACK)) {
- if (gfpflags & __GFP_WAIT)
- local_irq_enable();
- object = kmalloc_large(s->objsize, gfpflags);
- if (gfpflags & __GFP_WAIT)
- local_irq_disable();
- return object;
- }
return NULL;
debug:
if (!alloc_debug_processing(s, c->page, object, addr))
* take the list_lock.
*/
static int slub_min_order;
-static int slub_max_order = DEFAULT_MAX_ORDER;
-static int slub_min_objects = DEFAULT_MIN_OBJECTS;
+static int slub_max_order = PAGE_ALLOC_COSTLY_ORDER;
+static int slub_min_objects;
/*
* Merge control. If this is set then no merging of slab caches will occur.
* system components. Generally order 0 allocations should be preferred since
* order 0 does not cause fragmentation in the page allocator. Larger objects
* be problematic to put into order 0 slabs because there may be too much
- * unused space left. We go to a higher order if more than 1/8th of the slab
+ * unused space left. We go to a higher order if more than 1/16th of the slab
* would be wasted.
*
* In order to reach satisfactory performance we must ensure that a minimum
* we reduce the minimum objects required in a slab.
*/
min_objects = slub_min_objects;
+ if (!min_objects)
+ min_objects = 4 * (fls(nr_cpu_ids) + 1);
while (min_objects > 1) {
- fraction = 8;
+ fraction = 16;
while (fraction >= 4) {
order = slab_order(size, min_objects,
slub_max_order, fraction);
* calculate_sizes() determines the order and the distribution of data within
* a slab object.
*/
-static int calculate_sizes(struct kmem_cache *s)
+static int calculate_sizes(struct kmem_cache *s, int forced_order)
{
unsigned long flags = s->flags;
unsigned long size = s->objsize;
*/
size = ALIGN(size, align);
s->size = size;
-
- if ((flags & __KMALLOC_CACHE) &&
- PAGE_SIZE / size < slub_min_objects) {
- /*
- * Kmalloc cache that would not have enough objects in
- * an order 0 page. Kmalloc slabs can fallback to
- * page allocator order 0 allocs so take a reasonably large
- * order that will allows us a good number of objects.
- */
- order = max(slub_max_order, PAGE_ALLOC_COSTLY_ORDER);
- s->flags |= __PAGE_ALLOC_FALLBACK;
- s->allocflags |= __GFP_NOWARN;
- } else
+ if (forced_order >= 0)
+ order = forced_order;
+ else
order = calculate_order(size);
if (order < 0)
s->align = align;
s->flags = kmem_cache_flags(size, flags, name, ctor);
- if (!calculate_sizes(s))
+ if (!calculate_sizes(s, -1))
goto error;
s->refcount = 1;
down_write(&slub_lock);
if (!kmem_cache_open(s, gfp_flags, name, size, ARCH_KMALLOC_MINALIGN,
- flags | __KMALLOC_CACHE, NULL))
+ flags, NULL))
goto panic;
list_add(&s->list, &slab_caches);
if (slub_nomerge || (s->flags & SLUB_NEVER_MERGE))
return 1;
- if ((s->flags & __PAGE_ALLOC_FALLBACK))
- return 1;
-
if (s->ctor)
return 1;
static int any_slab_objects(struct kmem_cache *s)
{
int node;
- int cpu;
-
- for_each_possible_cpu(cpu) {
- struct kmem_cache_cpu *c = get_cpu_slab(s, cpu);
-
- if (c && c->page)
- return 1;
- }
for_each_online_node(node) {
struct kmem_cache_node *n = get_node(s, node);
if (!n)
continue;
- if (n->nr_partial || atomic_long_read(&n->nr_slabs))
+ if (atomic_read(&n->total_objects))
return 1;
}
return 0;
}
SLAB_ATTR_RO(objs_per_slab);
+static ssize_t order_store(struct kmem_cache *s,
+ const char *buf, size_t length)
+{
+ int order = simple_strtoul(buf, NULL, 10);
+
+ if (order > slub_max_order || order < slub_min_order)
+ return -EINVAL;
+
+ calculate_sizes(s, order);
+ return length;
+}
+
static ssize_t order_show(struct kmem_cache *s, char *buf)
{
return sprintf(buf, "%d\n", oo_order(s->oo));
}
-SLAB_ATTR_RO(order);
+SLAB_ATTR(order);
static ssize_t ctor_show(struct kmem_cache *s, char *buf)
{
s->flags &= ~SLAB_RED_ZONE;
if (buf[0] == '1')
s->flags |= SLAB_RED_ZONE;
- calculate_sizes(s);
+ calculate_sizes(s, -1);
return length;
}
SLAB_ATTR(red_zone);
s->flags &= ~SLAB_POISON;
if (buf[0] == '1')
s->flags |= SLAB_POISON;
- calculate_sizes(s);
+ calculate_sizes(s, -1);
return length;
}
SLAB_ATTR(poison);
s->flags &= ~SLAB_STORE_USER;
if (buf[0] == '1')
s->flags |= SLAB_STORE_USER;
- calculate_sizes(s);
+ calculate_sizes(s, -1);
return length;
}
SLAB_ATTR(store_user);
projects / linux-beck.git / blobdiff